Advanced CLOS multi-grade multi-plane switching architecture
Adopt CLOS multi-grade multi-plane architecture, providing industry leading port density
S9810 can provide max.480 line-speed 10G interfaces or 120 line-speed 40G interface per chassis, fulfilling high density 10G, 40G and future 100G application
Virtualization technologies - IRF2
IRF2 can virtualize up to four S9800 switche into one logical IRF fabric. IRF2 delivers the following benefits:
High Availability (HA) - Patented hot standby technology to provide data backup and non-stop forwarding on the control plane and data plane. This improves availability and performance, eliminates single-point failures, and ensures service continuity.
Distribution - Multi-chassis link aggregation to enable load sharing and backup over multiple uplinks, improving redundancy and link utilization.
Easy Management - A single IP address to manage the whole IRF fabric, which simplifies device and topology management, improving operating efficiency, and lowering network maintenance cost.
Virtualization technologies – MDC
MDC virtualizes one S9800 switch into multiple logical switches, enabling multiple services to share one core switch. The 1:N virtualization maximizes switch utilization, reduces network TCO, and ensures secure isolation of services.
DC-class HA
BFD for VRRP/BGP/IS-IS/RIP/OSPF/RSVP/static routing.
NSR/GR for OSFP/BGP/IS-IS/RSVP.
1+1 redundancy for fan trays.
N+M redundancy for power modules.
S9810 1+1 redundancy for control engines.
Multi-level security protection
The S9800 switch series use QoS policies to filter and limit traffic from data plane to control plane. During a DoS attack, the switch can identify and protect important packets and discard attack packets, ensuring normal operation.
Supports a large numbers of ACLs while ensuring line-speed forwarding. ACLs can identify and control L2/IPv4/IPv6/MPLS traffic by using combinations of packet fields.
Comprehensive maintenance and monitoring
Online state monitoring - Uses a dedicated engine to monitor the state of switch fabric modules, backplane channels, service communication channels, key chips, and storage.
Card isolation - Isolates specified cards from the forwarding plane. The isolated cards still work on the control plane, allowing the user to perform management operations such as real-time diagnosis and CPLD upgrade on the isolated cards without affecting system operation.
Ethernet OAM provides multiple device-level and network-level fault detection methods.
DC-oriented features
Low latency, suitable for high performance data centre
Distributed ingress buffers (100 ms) to accommodate burst traffic in data centers
Large capacities for storing ARP/ND, suitable for large scale flat data centre
Advanced flow control and back pressure mechanism for new generation data centre lossless design
FCOE - Integrates heterogeneous LANs and storage networks in data centers. FCOE and CEE integrate data, computing, and storage networks in data centers, reducing the costs for building and expanding data centers
Green
Intelligent EMS engine system - Provides smart power management that supports sequential power-on and power-off and device status check. Sequential power-on and power-off reduces power impulse and electromagnetic radiation, and increases the lifetime of the device. Additionally, device status checks can isolate faulty and idle cards to reduce power consumption.
Smart fan management - Collects fan temperature, calculates fan speed, and assigns the calculated speed to the fan tray. In addition, it detects fan speeds, fault alarms, and performs speed adjustment based on configurations and area, reducing power consumption and noise, increasing the fan's lifetime.
Internal interface monitoring - Automatically shuts down unused internal interfaces to reduce power consumption.
RoHS compliance - The S9800 series meets the EU RoHS safety standards.
Login
Products and Solutions
Can support upto 16M multi-tenants users
Technical Documents
Software Download