欢迎user
01-OAP单板命令
本章节下载: 01-OAP单板命令 (80.06 KB)
本系列交换机未形成IRF时,适用本手册中的“分布式设备”的情况;形成IRF后则适用本手册中的“分布式IRF设备”的情况。有关IRF特性的详细介绍,请参见“IRF配置指导”。
【命令】
分布式设备:
oap connect slot slot-number
分布式IRF设备:
oap connect chassis chassis-number slot slot-number
【视图】
用户视图
【缺省级别】
1:监控级
【参数】
slot slot-number:OAP单板所在的槽位号。(分布式设备)
chassis chassis-number slot slot-number:表示指定成员设备上的指定单板。chassis-number表示设备在IRF中的成员编号,slot-number表示单板的槽位号。(分布式IRF设备)
【描述】
oap connect命令用来从设备侧重定向到OAP单板的软件系统。
按快捷键<Ctrl+k>可以从OAP单板的软件系统返回到设备命令行操作界面。
ACG、IPS单板不支持oap connect命令。
【举例】
(1) 分布式设备
# 从设备侧重定向到3号槽位的OAP单板。
<Sysname> oap connect slot 3
Press CTRL+K to quit.
Connected to OAP!
(2) 分布式IRF设备
# 从设备侧重定向到成员设备2的5号槽位的OAP单板。
<Sysname> oap connect chassis 2 slot 5
Press CTRL+K to quit.
Connected to OAP!
【命令】
分布式设备:
oap reboot slot slot-number
分布式IRF设备:
oap reboot chassis chassis-number slot slot-number
【视图】
用户视图
【缺省级别】
2:系统级
【参数】
slot slot-number:OAP单板所在的槽位号。(分布式设备)
chassis chassis-number slot slot-number:表示指定成员设备上的指定单板。chassis-number表示设备在IRF中的成员编号,slot-number表示单板的槽位号。(分布式IRF设备)
【描述】
oap reboot命令用来配置重启OAP单板。
【举例】
(1) 分布式设备
# 重启位于3号槽位的OAP单板。
<Sysname> oap reboot slot 3
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
# 重启2号成员设备上5号槽位的OAP单板。
<Sysname> oap reboot chassis 2 slot 5
This command will recover the OAP from shutdown or other failed state.
Warning: This command may lose the data on the hard disk if the OAP is not being shut down!
Continue? [Y/N]:y
Reboot OAP by command.
不同款型规格的资料略有差异, 详细信息请向具体销售和400咨询。H3C保留在没有任何通知或提示的情况下对资料内容进行修改的权利!