Switch series

Model

Product code

FS5100-EI series

Non-PoE switch

FS5100-12S-EI

LS-FS5100-12S-EI

FS5100-12MS-EI

LS-FS5100-12MS-EI

FS5100-20MS-EI

LS-FS5100-20MS-EI

FS5100-52F-EI-PS

LS-FS5100-52F-EI-PS

FS5100-8T2RS-EI

LS-FS5100-8T2RS-EI

FS5100-8T2RX-EI

LS-FS5100-8T2RX-EI

PoE switch

FS5100-8S-PWR-EI

LS-FS5100-8S-PWR-EI

FS5100-12S-PWR-EI

LS-FS5100-12S-PWR-EI

FS5100-12MS-PWR-EI

LS-FS5100-12MS-PWR-EI

FS5100-20MS-PWR-EI

LS-FS5100-20MS-PWR-EI

FS5100-8P2RS-EI

LS-FS5100-8P2RS-EI

FS5100-8P2RX-EI

LS-FS5100-8P2RX-EI

Dimensions (H × W × D)

43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in)

43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in)

43.6 × 294 × 179 mm (1.72 × 11.57 × 7.05 in)

43.6 × 440 × 400 mm (1.72 × 17.32 × 15.75 in)

Weight

≤ 1.3 kg (2.87 lb)

≤ 1.3 kg (2.87 lb)

≤ 1.6 kg (3.53 lb)

≤ 7 kg (15.43 lb)

Console port

1 × serial console port

10/100/1000BASE-T autosensing Ethernet port

8

8

16

2 (The two ports form combo interfaces with their corresponding SFP ports, respectively.)

5G/2.5G/1000/100BASE-T autosensing Ethernet port

N/A

2

2

N/A

SFP port

N/A

N/A

N/A

48 (The two highest-numbered SPF ports form combo interfaces with their corresponding 10/100/1000 BASE-T autosensing Ethernet ports, respectively.)

SFP+ port

4

2

2

4

Power interface (PI)

N/A

N/A

N/A

·          4 × 56 V PIs

·          200 W load per PI

·          A maximum power supply distance of 200 m (656.17 ft)

Input voltage

·          Rated voltage range: 100 VAC to 240 VAC @ 50 or 60 Hz

·          Max. voltage range: 90 VAC to 264 VAC@ 47 to 63 Hz

Minimum power consumption

9 W

10 W

11 W

·          One power supply: 38 W

·          Two power supplies: 49 W

Maximum power consumption

15 W

16 W

20 W

·          One power supply: 1000 W

·          Two power supplies: 1000 W

Melting current of power supply fuse

3.15 A/250 V

2 A/250 V

2 A/250 V

16 A/250 V

Cooling system

Passive cooling

Passive cooling

Passive cooling

Built-in fans with left-to-right airflow

Operating temperature

–5ºC to +45ºC (23°F to 113°F)

Note:

The maximum acceptable temperature decreases by 0.33°C (32.59°F) for every 100 m (328.08 ft) increase in altitude from 0 m (0 ft).

Operating humidity

5% to 95%, noncondensing

Installation compliance

UL62368-1/EN62368-1/IEC62368-1/UL60950-1/IEC60950-1/GB4943.1

Dimensions (H × W × D)

27 × 220 × 143.9 mm (1.06 × 8.66 × 5.67 in)

27 × 220 × 143.9 mm (1.06 × 8.66 × 5.67 in)

Weight (excluding the power adapter)

≤ 0.8 kg (1.76 lb)

≤ 0.8 kg (1.76 lb)

Console port

1

1

PSFP photoelectric hybrid port

2

N/A

PSFP+ photoelectric hybrid port

N/A

2

10/100/1000BASE-T autosensing Ethernet port

8

8

Input voltage

Power adapter input:

·          Rated voltage range: 100 VAC to 240 VAC @ 50/60 Hz

·          Max voltage range: 90 VAC to 264 VAC @ 47 to 63 Hz

PoE input voltage range: 44 VDC to 57 VDC

Note:

PoE input can supply power for the switch through a photoelectric hybrid port on the switch or the terminal block.

The switch supports power adapter input and PoE input. Do not use both the input methods. If you use both the input methods, only the power adapter input takes effect.

Power consumption (static)

Single-port PoE input: 6.6 W

Dual-port PoE input: 8.7 W

Power adapter input: 5.5 W

Single-port PoE input: 9.2 W

Dual-port PoE input: 11 W

Power adapter input: 7.1 W

Power consumption (typical)

Single-port PoE input: 10.7 W

Dual-port PoE input: 11.5 W

Power adapter input: 9.4 W

Single-port PoE input: 12.6 W

Dual-port PoE input: 14.3 W

Power adapter input: 11.2 W

Power consumption (fully loaded)

Single-port PoE input: 11.3 W

Dual-port PoE input: 12.1 W

Power adapter input: 11.9 W

Single-port PoE input: 13.5 W

Dual-port PoE input: 14.5 W

Power adapter input: 13.3 W

Chassis leakage current compliance

UL62368-1/EN62368-1/IEC62368-1/GB4943.1

Cooling system

Passive cooling

Melting current of power supply fuse

3.15 A/250 V

Operating temperature

–5ºC to +45ºC (23°F to 113°F)

Note:

The maximum acceptable temperature decreases by 0.33°C (32.59°F) for every 100 m (328.08 ft) increase in altitude from 0 m (0 ft).

Operating humidity

5% to 95%, noncondensing

Fire resistance compliance

UL62368-1/EN62368 -1/IEC62368 -1/GB4943.1

Dimensions (H × W × D)

43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in)

43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in)

43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in)

43.6 × 294 × 179 mm (1.72 × 11.57 × 7.05 in)

Weight

≤ 1.5 kg (3.31 lb)

≤ 1.5 kg (3.31 lb)

≤ 1.5 kg (3.31 lb)

≤ 2 kg (4.41 lb)

Console port

1 × serial console port

10/100/1000BASE-T autosensing Ethernet port

4

8

8

16

5G/2.5G/1000/100BASE-T autosensing Ethernet port

N/A

N/A

2

2

SFP+ port

4

4

2

2

Input voltage

·          Rated voltage range: 100 VAC to 240 VAC @ 50 or 60 Hz

·          Maximum voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz

Maximum PoE power per port

30 W

30 W

30 W (10/100/1000BASE-T autosensing Ethernet ports 1 and 2 do not support PoE.)

30 W (10/100/1000BASE-T autosensing Ethernet ports 1 and 2 do not support PoE.)

Total PoE power

65 W

125 W

125 W

125 W

Power consumption (static)

10 W

12 W

12 W

13 W

Power consumption (fully configured, including PoE power)

90 W

160 W

160 W

160 W

Melting current of power supply fuse

3.15 A/250 V

6.3 A/250 V

6.3 A/250 V

6.3 A/250 V

Cooling system

Passive cooling

Passive cooling

Passive cooling

Passive cooling

Operating temperature

–5ºC to +45ºC (23°F to 113°F)

Note:

The maximum acceptable temperature decreases by 0.33°C (32.59°F) for every 100 m (328.08 ft) increase in altitude from 0 m (0 ft).

Operating humidity

5% to 95%, noncondensing

Installation compliance

UL62368-1/EN62368-1/IEC62368-1/UL60950-1/IEC60950-1/GB4943.1

Dimensions (H × W × D)

43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in)

43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in)

Weight (excluding the power adapter)

≤ 1.2 kg (2.65 lb)

≤ 1.2 kg (2.65 lb)

Console port

1

1

PSFP port

2

N/A

PSFP+ port

N/A

2

10/100/1000BASE-T autosensing Ethernet port

8

8

Input voltage

Power adapter input:

·          Rated voltage range: 100 VAC to 240 VAC @ 50/60 Hz

·          Max voltage range: 90 VAC to 264 VAC @ 47 to 63 Hz

PoE input voltage range: 44 VDC to 57 VDC

Note:

PoE input can supply power for the switch through a photoelectric hybrid port on the switch or the terminal block.

The switch supports power adapter input or PoE input. Do not use both the input methods. If you use both the input methods, only the power adapter input takes effect.

Max PoE power per port

30 W

Total PoE power

PoE input: 60 W

Power adapter input: 125 W

Power consumption (static)

Single-port PoE input: 7.5 W

Dual-port PoE input: 8.5 W

Power adapter input: 8.5 W

Single-port PoE input: 8.8 W

Dual-port PoE input: 10.1 W

Power adapter input: 10.6 W

Power consumption (typical)

Single-port PoE input: 11.2 W

Dual-port PoE input: 11.3 W

Power adapter input: 11.2 W

Single-port PoE input: 12.4 W

Dual-port PoE input: 13.4 W

Power adapter input: 14.2 W

Power consumption (fully loaded)

Single-port PoE input: 71.2 W

Dual-port PoE input: 71.4 W

Power adapter input: 150 W

Single-port PoE input: 74.7 W

Dual-port PoE input: 76.2 W

Power adapter input: 153.5 W

Chassis leakage current compliance

UL62368-1/EN62368-1/IEC62368-1/GB4943.1

Cooling system

Passive cooling

Melting current of power supply fuse

5 A/250 V

Operating temperature

–5ºC to +45ºC (23°F to 113°F)

Note:

The maximum acceptable temperature decreases by 0.33°C (32.59°F) for every 100 m (328.08 ft) increase in altitude from 0 m (0 ft).

Operating humidity

5% to 95%, noncondensing

Fire resistance compliance

UL62368-1/EN62368-1/IEC62368-1/GB4943.1

PSR920-54A-B

Rated input voltage

100 VAC to 240 VAC @ 50 Hz or 60 Hz

For more information about the power supply, see H3C PSR920-54A-B Power Supply User Manual-APW100.

Max input voltage

90 VAC to 290 VAC @ 47 Hz to 63 Hz

Max output power

920 W

Item

Specification

Connector type

RJ-45

Compliant standard

EIA/TIA-232

Transmission baud rate

9600 bps (default) to 115200 bps

Services

·          Provides connection to an ASCII terminal.

·          Provides connection to the serial port of a local PC running terminal emulation program.

Available switch models

All switch models

Item

Specification

Connector type

RJ-45

Transmission rate, duplex mode, and auto MDI/MDI-X

·          10 Mbit/s, half/full-duplex

·          100 Mbit/s, half/full-duplex

·          1000 Mbit/s, full-duplex

·          MDI/MDI-X, autosensing

Max transmission distance

100 m (328.08 ft)

Available switch models

All switch models

Transmission medium

Category-5 (or above) twisted pair cable

Compatible standards

·          IEEE 802.3i

·          IEEE 802.3u,

·          IEEE 802.3ab

Item

Description

Connector type

RJ-45

Transmission rate, duplex mode, and auto MDI/MDI-X

·          100 Mbps, half/full-duplex

·          1 Gbps, full-duplex

·          2.5 Gbps, full-duplex

·          5 Gbps, full-duplex

·          MDI/MDI-X, autosensing

Max transmission distance

·          5 G mode: 100 m (328.08 ft) over Category-5e or above twisted pair

·          2.5 G mode: 200 m (656.17 ft) over Category-5e or above twisted pair

·          1 G mode: 140 m (459.32 ft) over Category-5e or above twisted pair

·          100 M mode: 100 m (328.084 ft) over Category-5e or above twisted pair

NOTE:

The maximum transmission distance depends on the target device and the twisted pair quality.

Available switch models

FS5100-12MS-EI, FS5100-12MS-PWR-EI, FS5100-20MS-EI, and FS5100-20MS-PWR-EI

Transmission medium

Category-5e (or above) twisted pair cable

Compatible standards

·          IEEE 802.3ab

·          IEEE 802.3an

Item

Description

Available transceiver modules and cables

GE SFP transceiver modules and cables in Table4-5.

Available switch models

FS5100-8T2RS-EI, FS5100-8P2RS-EI

Restrictions and guidelines

A PSFP port can provide 1 Gbps data links and receive PoE power at the same time only when it is installed with an SFP-GE-POE transceiver module.

SFP transceiver module

SFP-GE-T

N/A

RJ-45

Twisted pair cable

N/A

100 m (328.08 ft)

SFP-GE-T-D

N/A

RJ-45

Twisted pair cable

N/A

100 m (328.08 ft)

SFP-GE-POE

1310 nm

LC

SMF

N/A

10 km (6.21 miles)

SFP-GE-SX-MM850-A

850 nm

LC

50/125 µm multi-mode optical fiber

500

550 m (1804.46 ft)

400

500 m (1640.42 ft)

62.5/125 µm multi-mode optical fiber

200

275 m (902.23 ft)

160

220 m (721.78 ft)

SFP-GE-SX-MM850-D

850 nm

LC

50/125 µm multi-mode optical fiber

500

550 m (1804.46 ft)

400

500 m (1640.42 ft)

62.5/125 µm multi-mode optical fiber

200

275 m (902.23 ft)

160

220 m (721.78 ft)

SFP-GE-LX-SM1310-A

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

50/125 µm multi-mode fiber

500/400

550 m (1804.46 ft)

62.5/125 µm multi-mode fiber

500

550 m (1804.46 ft)

SFP-GE-LX-SM1310-D

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-GE-LH40-SM1310

1310 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LH40-SM1310-D

1310 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LH40-SM1550

1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LX-SM1310-BIDI

TX: 1310 nm

RX: 1490 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-GE-LX-SM1490-BIDI

TX: 1490 nm

RX: 1310 nm

SFP-GE-LH40-SM1310-BIDI

TX: 1310 nm

RX: 1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LH40-SM1550-BIDI

TX: 1550 nm

RX: 1310 nm

SFP cable

SFP-STACK-Kit

N/A

N/A

SFP cable

N/A

1.5 m (4.92 ft)

Item

Specification

Available transceiver modules and cables

GE SFP transceiver modules and cables in Table4-7.

Available switch models

FS5100-52F-EI-PS

Restrictions and guidelines

To use transceiver modules with a maximum transmission distance greater than or equal to 80 km (49.71 miles), make sure the ambient temperature does not exceed 40°C (104°F).

Copper SFP transceiver module

SFP-GE-T

N/A

RJ-45

Twisted pair cable

N/A

100 m (328.08 ft)

SFP-GE-T-D

N/A

RJ-45

Twisted pair cable

N/A

100 m (328.08 ft)

Fiber SFP transceiver module

SFP-GE-SX-MM850-A

850 nm

LC

50/125 µm multi-mode optical fiber

500

550 m (1804.46 ft)

400

500 m (1640.42 ft)

62.5/125 µm multi-mode optical fiber

200

275 m (902.23 ft)

160

220 m (721.78 ft)

SFP-GE-SX-MM850-D

850 nm

LC

50/125 µm multi-mode optical fiber

500

550 m (1804.46 ft)

400

500 m (1640.42 ft)

62.5/125 µm multi-mode optical fiber

200

275 m (902.23 ft)

160

220 m (721.78 ft)

SFP-GE-SX-MM850-S

850 nm

LC

50/125 µm multi-mode optical fiber

500

550 m (1804.46 ft)

400

500 m (1640.42 ft)

62.5/125 µm multi-mode optical fiber

200

275 m (902.23 ft)

160

220 m (721.78 ft)

SFP-GE-LX-SM1310-A

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

50/125 µm multi-mode fiber

500/400

550 m (1804.46 ft)

62.5/125 µm multi-mode fiber

500

550 m (1804.46 ft)

SFP-GE-LX-SM1310-D

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-GE-LX-SM1310-S

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-GE-LH40-SM1310

1310 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LH40-SM1310-D

1310 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LH40-SM1550

1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LH80-SM1550

1550 nm

LC

9/125 μm single-mode fiber

N/A

80 km (49.71 miles)

SFP-GE-LH80-SM1550-D

1550 nm

LC

9/125 μm single-mode fiber

N/A

80 km (49.71 miles)

SFP-GE-LH100-SM1550

1550 nm

LC

9/125 µm single-mode fiber

N/A

100 km (62.14 miles)

SFP-GE-LX-SM1310-BIDI

TX: 1310 nm

RX: 1490 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-GE-LX-SM1490-BIDI

TX: 1490 nm

RX: 1310 nm

SFP-GE-LH40-SM1310-BIDI

TX: 1310 nm

RX: 1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-GE-LH40-SM1550-BIDI

TX: 1550 nm

RX: 1310 nm

SFP-GE-LH70-SM1490-BIDI

TX: 1490 nm

RX: 1550 nm

LC

9/125 µm single-mode fiber

N/A

70 km (43.50 miles)

SFP-GE-LH70-SM1550-BIDI

TX: 1550 nm

RX: 1490 nm

SFP cable

SFP-STACK-Kit

N/A

N/A

SFP cable

N/A

1.5 m (4.92 ft)

Available transceiver modules and cables

·          GE SFP transceiver modules and cables in Table4-5.

·          10-GE SFP+ transceiver modules in Table4-9.

·          SFP+ copper and fiber cables in Table4-10.

Available switch models

FS5100-8T2RX-EI, FS5100-8P2RX-EI

Restrictions and guidelines

·          A PSFP+ port can provide 10 Gbps data links and receive PoE power at the same time only when it is installed with an SFP-XG-POE-MR transceiver module.

·          A PSFP+ port can provide 1 Gbps data links and receive PoE power at the same time only when it is installed with an SFP-GE-POE transceiver module.

SFP-XG-SX-MM850-D

850 nm

LC

50/125 µm multi-mode optical fiber

2000

300 m (984.25 ft)

500

82 m (269.03 ft)

400

66 m (216.54 ft)

62.5/125 µm multi-mode optical fiber

200

33 m (108.27 ft)

160

26 m (85.30 ft)

SFP-XG-LX-SM1310-D

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-XG-POE-MR

1310 nm

LC

SMF

N/A

1.4 km (0.87 miles)

SFP-XG-LH40-SM1550

1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-XG-LH40-SM1550-D

1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-XG-LX-SM1270-BIDI

TX: 1270 nm

RX: 1330 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-XG-LX-SM1330-BIDI

TX: 1330 nm

RX: 1270 nm

SFP-XG-LH40-SM1270-BIDI

TX: 1270 nm

RX: 1330 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-XG-LH40-SM1330-BIDI

TX: 1330 nm

RX: 1270 nm

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

Item

Max transmission distance

SFP+ copper cable

LSWM1STK

0.65 m (2.13 ft)

LSWM2STK

1.2 m (3.94 ft)

LSWM3STK

3 m (9.84 ft)

LSTM1STK

5 m (16.40 ft)

SFP+ fiber cable

SFP-XG-D-AOC-7M

7 m (22.97 ft)

SFP-XG-D-AOC-10M

10 m (32.81 ft)

SFP-XG-D-AOC-20M

20 m (65.62 ft)

Available transceiver modules and cables

·          GE SFP transceiver modules and cables in Table4-7.

·          10-GE SFP+ transceiver modules in Table4-12.

·          SFP+ copper and fiber cables in Table4-13.

Available switch models

FS5100-8S-PWR-EI, FS5100-12S-EI, FS5100-12S-PWR-EI, FS5100-12MS-EI, FS5100-12MS-PWR-EI, FS5100-20MS-EI, FS5100-20MS-PWR-EI, FS5100-52F-EI-PS

SFP-XG-SX-MM850-D

850 nm

LC

50/125 µm multi-mode optical fiber

2000

300 m (984.25 ft)

500

82 m (269.03 ft)

400

66 m (216.54 ft)

62.5/125 µm multi-mode optical fiber

200

33 m (108.27 ft)

160

26 m (85.30 ft)

SFP-XG-SX-MM850-E

850 nm

LC

50/125 µm multi-mode optical fiber

2000

300 m (984.25 ft)

500

82 m (269.03 ft)

400

66 m (216.54 ft)

62.5/125 µm multi-mode optical fiber

200

33 m (108.27 ft)

160

26 m (85.30 ft)

SFP-XG-SX-MM850-S

850 nm

LC

50/125 µm multi-mode optical fiber

2000

300 m (984.25 ft)

500

82 m (269.03 ft)

400

66 m (216.54 ft)

62.5/125 µm multi-mode optical fiber

200

33 m (108.27 ft)

160

26 m (85.30 ft)

SFP-XG-LX-SM1310-D

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-XG-LX-SM1310-E

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-XG-LX-SM1310-S

1310 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-XG-LH40-SM1550

1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-XG-LH40-SM1550-D

1550 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-XG-LH80-SM1550

1550  nm

LC

9/125 µm single-mode fiber

N/A

80 km (49.71 miles)

SFP-XG-LH80-SM1550-D

1550 nm

LC

9/125 µm single-mode fiber

N/A

80 km (49.71 miles)

SFP-XG-LX-SM1270-BIDI

TX: 1270 nm

RX: 1330 nm

LC

9/125 µm single-mode fiber

N/A

10 km (6.21 miles)

SFP-XG-LX-SM1330-BIDI

TX: 1330 nm

RX: 1270 nm

SFP-XG-LH40-SM1270-BIDI

TX: 1270 nm

RX: 1330 nm

LC

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

SFP-XG-LH40-SM1330-BIDI

TX: 1330 nm

RX: 1270 nm

9/125 µm single-mode fiber

N/A

40 km (24.86 miles)

Item

Max transmission distance

SFP+ copper cable

LSWM1STK

0.65 m (2.13 ft)

LSWM2STK

1.2 m (3.94 ft)

LSWM3STK

3 m (9.84 ft)

LSTM1STK

5 m (16.40 ft)

SFP+ fiber cable

SFP-XG-D-AOC-7M

7 m (22.97 ft)

SFP-XG-D-AOC-10M

10 m (32.81 ft)

SFP-XG-D-AOC-20M

20 m (65.62 ft)

SYS

Steady yellow

Boot ROM booting stage.

Steady green

Linux kernel booting stage, or the switch has started up correctly.

Flashing green (1 Hz)

Software image loading and decompressing stage, or software booting stage.

Flashing red (3 Hz)

The switch has failed POST or the switch is faulty.

Off

The switch is powered off or has not started up correctly.

PWR1/PWR2

Steady green

A power supply is installed in the power supply slot, and the power supply is outputting power correctly.

Steady yellow

A power supply is installed in the power supply slot, but the power supply is faulty or not powered on.

Off

No power supply is installed in the power supply slot.

Mode LED (MODE)

Steady green

The Ethernet port LEDs are showing link state of the ports.

Flashing green

The Ethernet port LEDs are showing the PoE status of the ports.

Flashing yellow

The Ethernet port LEDs work in conjunction to indicate the IRF member ID of the switch. For example, if the LED for port 5 is steady green, the IRF member ID of the switch is 5.

Steady green

A link is present on the port.

Flashing green

The port is sending or receiving data.

Off

·          No link is present on the port.

·          The mode LED is operating in PoE mode.

Steady green (Link/Active mode)

Steady green

A link is present on the port.

Flashing green

The port is sending or receiving data.

Off

No link is present on the port.

Flashing yellow (IRF mode)

Steady green

The PSFP/PSFP+ port LEDs on the switch work in conjunction to indicate the IRF member ID of the switch. For example, if the LED for port 5 is steady green and the other port LEDs are off, the IRF member ID of the switch is 5.

Steady green (Link/Active mode)

Steady green

A link is present on the port.

Flashing green

The port is sending or receiving data.

Off

No link is present on the port.

Flashing green (PoE mode)

Steady green

PoE power supply is normal.

Flashing green (1 Hz)

·          The maximum PoE power provided by the port does not meet the power requirement of the PD.

·          PoE power supply overcurrent, overvoltage, or short-circuit has occurred.

·          The remaining power of the switch does not meet the power supply requirement of the port.

Steady yellow

The port has failed to supply power.

Off

The port is not connected to a PD or PoE is not enabled on the port.

Flashing yellow (IRF mode)

Steady green

The Ethernet port LEDs on the switch work in conjunction to indicate the IRF member ID of the switch. For example, if the LED for port 5 is steady green and the other port LEDs are off, the IRF member ID of the switch is 5.

Steady green

A link is present on the port.

Flashing green

The port is sending or receiving data.

Off

No link is present on the port.

LED mark

Status

Description

OUT1

OUT2

OUT3

OUT4

On

The PI is outputting power correctly.

Off

Power output failure has occurred on the PI.