About the H3C SecCenter CSAP-NTA Comware 7 command references

CSAP-NTA-100, CSAP-NTA-200, CSAP-NTA-AK375

R8660

CSAP-NTA-300, CSAP-NTA-400, CSAP-NTA-500, CSAP-NTA-600

R8660

CSAP-NTA-V200, CSAP-NTA-V1000

E1260

Fundamentals Command Reference

Covers the commands for logging in to and setting up the device. This command reference includes:

·     CLI

·     RBAC

·     Login management

·     License management

·     Device management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     ISSU

·     Automatic configuration

·     Tcl

·     Python

Security Command Reference

Covers the commands for configuring security features. This command reference includes:

·     Security zone

·     Security policy

·     ASPF

·     Session management

·     Object group

·     AAA

·     User identification

·     Password control

·     Public key configuration

·     PKI

·     SSH

·     SSL

·     Attack detection and prevention

·     Server connection detection

·     ARP attack protection

·     ND attack defense

·     uRPF

·     IP-MAC binding

·     APR

·     Keychain

·     Crypto engine

·     MAC learning through a Layer 3 device

·     IP source guard

·     Connection limit

DPI Command Reference

Covers the commands for configuring DPI features. This command reference includes:

·     DPI engine

·     IPS

·     URL filtering

·     Data filtering

·     File filtering

·     Anti-virus

·     Data analysis center

·     Proxy policy

·     WAF

·     APT defense

·     IP reputation

·     Domain reputation

Internet Access Behavior Management Command Reference

Covers the commands for managing Internet access behaviors. This command reference includes:

·     Bandwidth management

·     Application audit and management

·     NetShare control

Interface Command Reference

Covers the interface configuration commands. This command reference includes:

·     Bulk interface

·     Ethernet interface

·     Loopback, null, and inloopback interfaces

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC address table

·     Layer 2 forwarding

·     Ethernet link aggregation

·     VLAN

·     VLAN termination

·     LLDP

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     IP addressing

·     IP forwarding basics

·     Fast forwarding

·     ARP

·     IPv6 basics

·     IPv6 fast forwarding

·     DHCP

·     DHCPv6

·     DNS

·     IP performance optimization

·     Multi-CPU packet distribution

·     Adjacency table

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     Basic IP routing

·     Static routing

·     IPv6 static routing

·     RIP

·     RIPng

·     OSPF

·     OSPFv3

·     BGP

·     Policy-based routing

·     IPv6 policy-based routing

·     Routing policy

·     Guard route

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS

·     Time range

IP Multicast Command Reference

Covers the commands for IP multicast features. This command reference includes:

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     IPv6 multicast routing and forwarding

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes:

·     Information center

·     Fast log output

·     NetStream

·     Mirroring

·     Packet capture

·     NQA

·     Track

·     BFD

·     Interface backup

·     System maintenance and debugging

·     NTP

·     EAA

·     Process monitoring and maintenance

·     NETCONF

·     CWMP

·     SNMP

·     RMON

·     Event MIB

VPN Instance Command Reference

Covers the commands for configuring VPN instances.