Fundamentals Command Reference

Covers the commands for logging in to and setting up an H3C access controller. This command reference includes:

·     CLI

·     RBAC

·     Login management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     Device management

·     Tcl

·     Python

·     License management

WLAN Command Reference

Covers the commands for configuring WLAN access, WLAN security, WLAN authentication, WLAN roaming, channel scanning, WLAN load balancing, WIPS, WM2U, and so on. This command reference includes:

·     AP management

·     Radio management

·     WLAN access

·     WLAN security

·     WLAN authentication

·     WIPS

·     WLAN QoS

·     WLAN roaming

·     WLAN load balancing

·     WLAN radio resource measurement

·     Channel scanning

·     Band navigation

·     WLAN high availability

·     802.11r

·     Bonjour gateway

·     Wireless locating

·     Hierarchy AC

·     WSA

·     WLAN mesh

·     WLAN multicast optimization

·     Hotspot 2.0

·     WLAN RRM

·     WT

·     IoT AP

·     CM tunnel

·     WLAN fast forwarding

·     Cloud connection

·     WLAN optimization

·     WLAN DRS

·     WLAN IP snooping

·     WLAN fast forwarding

·     WLAN forwarding

Interface Command Reference

Covers the commands for configuring Ethernet interfaces, loopback interfaces, null interfaces, inloopback interfaces, and bulk interface settings. This command reference includes:

·     Bulk interface configuration

·     Ethernet interface

·     Loopback, null, and inloopback interface

Layer 2—LAN Switching Command Reference

Covers the commands for configuring MAC address table, Ethernet link aggregation, VLAN, spanning tree, LLDP, Layer 2 forwarding, and loop detection. This command reference includes:

·     MAC address table

·     Ethernet link aggregation

·     VLAN

·     Loop detection

·     Spanning tree

·     LLDP

·     Layer 2 forwarding

·     VLAN termination

·     Port isolation

Layer 2—WAN Access Command Reference

Covers the commands for configuring PPP and L2TP. This command reference includes:

·     PPP

·     L2TP

Layer 3—IP Services Command Reference

Covers the commands for configuring IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP

·     IP addressing

·     DHCP

·     DNS

·     NAT

·     IP performance optimization

·     IPv6 basics

·     DHCPv6

·     GRE

Layer 3—IP Routing Command Reference

Covers the commands for configuring basic IP routing and static routing. This command reference includes:

·     Basic IP routing

·     Static routing

·     RIP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     IPv6 policy-based routing

IP Multicast Command Reference

Covers the commands for configuring IGMP snooping and MLD snooping. This command reference includes:

·     IGMP snooping

·     MLD snooping

ACL and QoS Command Reference

Covers the commands for configuring ACL and QoS. This command reference includes:

·     ACL

·     QoS (QoS overview, QoS policy, and priority mapping)

·     Time range

Security Command Reference

Covers the commands for configuring identity authentication (AAA and PKI), access security (802.1X, MAC authentication, and portal), secure management (SSH), and security protection (IP source guard and ARP attack protection). This command reference includes:

·     AAA

·     802.1X

·     802.1X client

·     MAC authentication

·     Portal

·     Port security

·     User profile

·     Public key management

·     PKI

·     IPsec

·     SSH

·     SSL

·     Session management

·     Connection limit

·     Attack detection and prevention

·     IP source guard

·     ARP attack protection

·     ND attack defense

·     User isolation

·     Protocol packet rate limit

·     ASPF

·     Password control

High Availability Command Reference

Covers the commands for configuring interface backup and track. This command reference includes:

·     Interface backup

·     Track

Network Management and Monitoring Command Reference

Covers the commands that help you manage networks, display system information, control network traffic, sample packets, analyze network performance, and debug network connectivity. This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging)

·     NQA

·     NTP

·     SNMP

·     RMON

·     NETCONF

·     EAA

·     Process monitoring and maintenance

·     PoE

·     sFlow

·     Flow log

·     Packet capture

·     Information center

·     Mirroring

OAA Command Reference

Covers the commands for logging in to the H3C open application platform (OAP) card connected to your device and resetting the operating system of the OAP card. H3C OAP cards use the open service architecture design, and enable you to provide custom services.

IRF Command Reference

Covers the commands for configuring IRF.

WX1800H

·     WX1804H access controller

·     WX1810H access controller

·     WX1820H access controller

WX2500H

·     WX2510H access controller

·     WX2540H access controller

·     WX2560H access controller

WX3000H

·     WX3010H access controller

·     WX3010H-X access controller

·     WX3010H-L access controller

·     WX3024H access controller

·     WX3024H-L access controller

WX3500H

·     WX3510H access controller

·     WX3520H access controller

·     WX3540H access controller

WX5500E

·     WX5510E access controller

·     WX5540E access controller

WX5500H

·     WX5540H access controller

·     WX5560H access controller

·     WX5580H access controller

Access controller modules

·     LSUM1WCME0 access controller module

·     EWPXM1WCME0 access controller module

·     LSQM1WCMX20 access controller module

·     LSUM1WCMX20RT access controller module

·     LSQM1WCMX40 access controller module

·     LSUM1WCMX40RT access controller module

·     EWPXM2WCMD0F access controller module

·     EWPXM1MAC0F access controller module