Login
- Released At: 08-05-2025
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
|
|
|
|
|
H3C PoE Injectors |
|
User Guide |
|
|
|
New H3C Technologies Co., Ltd. http://www.h3c.com
Document version: 6W103-20250430 |
About the ADP060-55V-PoE-GL PoE injector
About the ADP040-54V-PoE-GL PoE injector
About the EWPAM1HPOE PoE injector
About the EWPAM3NPOE PoE injector
H3C PoE injectors
|
|
CAUTION: The available H3C PoE injector models vary by country and region. This document is for generic reference only. To avoid damages, contact the local H3C sales agent or technical support when using an H3C PoE injector. |
This document provides brief introduction, views, and technical specifications for H3C PoE injectors.
ADP060-55V-PoE-GL
About the ADP060-55V-PoE-GL PoE injector
The ADP060-55V-PoE-GL (part number: 9801A1PJ) is a two-port PoE injector. It has a robust design and can withstand harsh environmental conditions and can provide optimal performance across a wide range of temperatures. It can be used indoors and outdoors (because it is not waterproof, waterproof measures must be taken for outdoor use). It can connect a network endpoint over a Category 6A cables and is applicable to a 100/1000M/2.5GE/5GE/10GE network. This power injector offers excellent compatibility and provides power over Ethernet (PoE) functions according to 802.3af, 802.3at, and 802.3bt (Type 3) standards.
|
|
IMPORTANT: As a best practice, do not connect the ADP060-55V-PoE-GL PoE injector to two APs simultaneously. |
Figure 1 ADP060-55V-PoE-GL PoE injector view and its ports
|
(1) PoE ports |
(2) 100/1000M/2.5GE/5GE/10GE Ethernet ports |
(3) AC power input receptacle |
Table 1 ADP060-55V-PoE-GL PoE injector ports
|
Port type |
Compliant standards and protocols |
Description |
|
PoE1/PoE2 |
N/A |
Signal & power output port, used for connecting a powered device (PD) such as an AP. |
|
LAN1/LAN2 |
IEEE802.3ab / 802.3bz / 802.3an |
Signal input port, used for connecting to an Ethernet switch. |
|
AC power input receptacle |
N/A |
Used for connecting to a local power source. |
Technical specifications
Table 2 ADP060-55V-PoE-GL power injector technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
46 × 208 × 85 mm (1.81 × 8.19 × 3.35 in) |
|
Weight |
0.437 kg (0.96 lb) |
|
Rated input voltage |
100 VAC to 240 VAC @ 50/60 Hz |
|
Max input current |
1.5 A (115 VAC, fully loaded) 0.75 A (230 VAC, fully loaded) |
|
Rated output voltage |
55 VDC |
|
Rated output current |
1.1 A |
|
Total output power |
≤ 60 W |
|
Temperature |
Operating: –30°C to +55°C (–22°F to +131°F) Storage: –30°C to +70°C (–22°F to +158°F) |
|
Ambient humidity |
Operating: 5% RH to 95% RH, noncondensing Storage: 10% RH to 90% RH, noncondensing |
|
Security compliance |
CE/CCC/UL |
|
AC power cord |
Removable, C14 connector Whether the power cord is provided varies by region. |
Connecting Ethernet cables
You must use a signal input port and a signal & power output port in correct paring. The signal input port LAN1 must be paired with signal & power output port PoE1, and LAN2 must work paired with PoE2.
To connect a signal & power output port to an AP, make sure you connect its pair signal input port to an Ethernet switch.
Figure 2 ADP060-55V-PoE-GL connection
ADP040-54V-PoE-GL
About the ADP040-54V-PoE-GL PoE injector
The ADP040-54V-PoE-GL (part number: 0231A9BR) includes a single-port power injector EWPAM1NPOE and a 40W power adapter ADP040-54V-GL. It supplies power to a PD such as a WLAN AP from the Ethernet RJ-45 port over a Category 5e cable. It is applicable to a 10/100/1000M network.
Figure 3 ADP040-54V-PoE-GL PoE injector view
Table 3 ADP040-54V-PoE-GL PoE injector ports
|
Port type |
Compliant standards and protocols |
Description |
|
ETH+VDC |
N/A |
Signal & power output port, used for connecting a PD such as an AP. |
|
ETH |
IEEE802.3 IEEE802.3u |
Signal input port, used for connecting to an Ethernet switch. |
|
DC power input receptacle |
N/A |
Used for connecting to a local power source. |
Technical specifications
Table 4 ADP040-54V-PoE-GL power adapter technical specifications
|
Item |
Specification |
|
Rated input voltage |
100 VAC to 240 VAC @ 50/60 Hz |
|
Max input current |
1.5 A (115 VAC, fully loaded) 0. A (230 VAC, fully loaded) |
|
Rated output voltage |
54 VDC |
|
Rated output current |
0.74 A |
|
Output power |
≤ 40 W |
|
Temperature |
Operating: –10°C to +45°C (14°F to +113°F) Storage: –40°C to +70°C (–40°F to +158°F) |
|
Ambient humidity |
Operating: 5% RH to 95% RH, noncondensing Storage: 5% RH to 95% RH, noncondensing |
|
Security compliance |
CE/TUV-GS/UL/CCC |
|
AC power cord |
Removable, C14 connector Whether the power cord is provided varies by region. |
Table 5 ADP040-54V-PoE-GL power injector technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
30 × 80 × 55 mm (1.18 × 3.15 × 2.17 in) |
|
Weight |
62 g (2.19 oz) |
|
Security compliance |
CE |
Connecting Ethernet cables
The ETH port is a signal input port, used for connecting an Ethernet switch. The ETH+VDC port is a signal & power output port, used for connecting an AP.
Figure 4 ADP040-54V-PoE-GL connection
EWPAM1HPOE
About the EWPAM1HPOE PoE injector
The EWPAM1HPOE (part number: 9802A036) is a single-port, high-power remote PoE injector that is used indoors. It can connect to a network endpoint over a category-5e cable and is applicable to a 100/1000M/2.5GE network.
Figure 5 EWPAM1HPOE PoE injector view
|
(1) LAN port |
(2) PoE port |
(3) DC power input receptacle |
Table 6 Description for ports on an EWPAM1HPOE PoE injector
|
Port type |
Compliant standards and protocols |
Description |
|
LAN |
· IEEE802.3 · IEEE802.3u |
Signal input port, used for connecting to an Ethernet switch. |
|
PoE |
N/A |
Signal and power output port, used for connecting to a PD such as an AP. |
|
DC power input receptacle |
N/A |
Used for connecting to a local power source. |
Technical specifications
Table 7 EWPAM1HPOE PoE injector technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
34.5 × 107.3 × 56 mm (1.36 × 4.22 × 2.20 in) |
|
Weight |
0.157 kg (0.35 lb) |
|
Rated input voltage |
100 to 240 VAC @ 50 or 60 Hz |
|
Max input current |
1 A (115 VAC, full load) 0.5 A (230 VAC, full load) |
|
Rated output voltage |
55 VDC |
|
Rated output current |
0.55 A |
|
Output power |
≤ 30.25 W |
|
Temperature |
Operating: –10°C to +45°C (14°F to 113°F) Storage: –40°C to +85°C (–40°F to +185°F) |
|
Humidity |
Operating: 20% RH to 90% RH, noncondensing Storage: 10% RH to 90% RH, noncondensing |
|
AC power cord |
Provided with a removable 0.8 m (2.62 ft) power cord |
|
Security compliance |
CE/CB/FCC/CCC |
Connecting Ethernet cables
Connect the ETH port, a signal input port, to an Ethernet switch.
Connect the ETH+VDC port, a signal and power output port, to an AP.
Figure 6 Connecting Ethernet cables for an EWPAM1HPOE PoE injector
EWPAM3NPOE
About the EWPAM3NPOE PoE injector
The EWPAM3NPOE (part number: 9809A00M) is an indoor single-port PoE injector. It can connect to a network endpoint over a category-6e cable and is applicable to a 100/1000M/2.5GE/5GE/10GE network.
Figure 7 EWPAM3NPOE PoE injector view
|
(1) PoE port |
(2) 100/1000M/2.5G/5G/10G Ethernet port |
|
(3) DC power input receptacle |
|
Table 8 Description for ports on an EWPAM3NPOE PoE injector
|
Port type |
Compliant standards and protocols |
Description |
|
ETH+VDC |
N/A |
Signal and power output port, used for connecting to a PD such as an AP. |
|
ETH |
IEEE802.3 |
Signal input port, used for connecting to an Ethernet switch. |
|
DC power input receptacle |
N/A |
Used for connecting to a local power source. |
Technical specifications
Table 9 EWPAM3NPOE PoE injector technical specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
26 × 64.2 × 47 mm (1.02 × 2.53 × 1.85 in) |
|
Weight |
41.5 g (1.46 oz) |
|
Security compliance |
CE/CB |
Connecting Ethernet cables
Connect the ETH port, a signal input port, to an Ethernet switch.
Connect the ETH+VDC port, a signal and power output port, to an AP.
Figure 8 Connecting Ethernet cables for an EWPAM3NPOE PoE injector
