Fundamentals Command Reference

Covers the commands for logging in to and setting up an S6530X switch.

This command reference includes:

·     CLI.

·     RBAC.

·     Logging in to the switch.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     ISSU.

·     GIR.

·     Automatic configuration.

·     Device management.

·     Multichassis configuration sync.

·     Tcl.

·     Python.

·     License management.

Virtual Technologies Command Reference

Covers the IRF configuration commands.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network.

This command reference includes:

·     MAC address table.

·     Bulk interface configuration.

·     Ethernet interface.

·     Ethernet link aggregation.

·     M-LAG.

·     Port isolation.

·     VLAN.

·     MVRP.

·     Loopback, null, and inloopback interfaces.

·     QinQ.

·     VLAN mapping.

·     Loopback detection.

·     Spanning tree.

·     LLDP.

·     Service loopback group.

·     L2PT.

·     Service loopback group.

·     Cut-through Layer 2 forwarding.

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This command reference includes:

·     ARP.

·     IP addressing.

·     DHCP.

·     DNS.

·     mDNS gateway.

·     mDNS relay.

·     IP forwarding basics.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6.

·     IPv6 fast forwarding.

·     Tunneling.

·     HTTP redirect.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This command reference includes:

·     IP routing basics.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

·     DCN.

·     Dual-stack PBR.

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD, IPv6 PIM, and MSDP).

This command reference includes:

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     Multicast VPN.

·     MLD snooping.

·     IPv6 PIM snooping.

·     IPv6 multicast VLAN.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM.

MPLS Command Reference

Covers the MPLS commands.

This command reference includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     Tunnel policy.

·     MPLS L3VPN.

·     MPLS L2VPN.

·     VPLS.

·     MPLS OAM.

·     MCE.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This command reference includes:

·     ACL.

·     QoS.

·     Data buffer.

·     Time range.

Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, and uRPF).

This command reference includes:

·     AAA.

·     802.1X.

·     MAC authentication.

·     Portal.

·     Web authentication.

·     Port security.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec.

·     SSH.

·     SSL.

·     Attack detection and prevention.

·     TCP attack prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     MFF.

·     FIPS.

·     MACsec.

·     802.1X client.

·     Microsegmentation.

·     Object group.

·     IP-SGT mapping.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This command reference includes:

·     Ethernet OAM.

·     DLDP.

·     RRPP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     Error code detection.

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

·     Interface collaboration.

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This command reference includes:

·     System maintenance and debugging.

·     NQA.

·     iNQA.

·     NTP.

·     PTP.

·     SNMP.

·     RMON.

·     NETCONF.

·     SmartMC.

·     EPA.

·     CWMP.

·     EAA.

·     Process monitoring and maintenance.

·     Sampler.

·     Mirroring.

·     NetAnalysis.

·     sFlow.

·     Information center.

·     Packet capture.

·     VCF.

·     NetStream.

·     IPv6 NetStream.

·     Cloud connection.

·     SQA.

·     eMDI.

·     Performance management.

·     TCP connection trace.

Telemetry Command Reference

Covers the telemetry-related commands.

This command reference includes:

·     gRPC.

·     Telemetry stream.

·     Flow group.

·     MOD.

·     INT.

OpenFlow Command Reference

Covers the OpenFlow configuration commands.

VXLAN Command Reference

Covers the VXLAN configuration commands.

EVPN Command Reference

Covers the EVPN configuration commands.

Intelligent Lossless Network Command Reference

Covers the intelligent lossless network configuration commands, through which you can set up a network with zero packet loss, high throughput, and low latency.

This command reference includes:

·     PFC.

·     IPCC.

·     iNOF.

TAP Command Reference

Covers the TAP configuration commands.

AIOps Command Reference

Covers the AIOps configuration commands.