Fundamentals Command Reference

Covers the commands for logging in to and setting up an S6530X switch.

This command reference includes:

·     CLI.

·     RBAC.

·     Login management.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     ISSU.

·     GIR.

·     Automatic configuration.

·     Device management.

·     Tcl.

·     Python.

·     License management.

Virtual Technologies Command Reference

Covers the IRF configuration commands.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network.

This command reference includes:

·     MAC address table.

·     PFC.

·     Bulk interface.

·     Ethernet interface.

·     Ethernet link aggregation.

·     M-LAG.

·     Port isolation.

·     VLAN.

·     MVRP.

·     Loopback, null, and inloopback interface.

·     QinQ.

·     VLAN mapping.

·     Loop detection.

·     Spanning tree.

·     LLDP.

·     Layer 2 forwarding.

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This command reference includes:

·     ARP.

·     IP addressing.

·     DHCP.

·     DNS.

·     mDNS gateway.

·     mDNS relay.

·     IP forwarding basics.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6.

·     IPv6 fast forwarding.

·     Tunneling.

·     HTTP redirect.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This command reference includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

·     DCN.

·     Dual-stack PBR.

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD, IPv6 PIM, and MSDP).

This command reference includes:

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     MLD snooping.

·     IPv6 PIM snooping.

·     IPv6 multicast VLAN.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM.

MPLS Command Reference

Covers the MPLS commands.

This command reference includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     Tunnel policy.

·     MPLS L3VPN.

·     MPLS OAM.

·     MCE.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This command reference includes:

·     ACL.

·     QoS.

·     Data buffer.

·     Time range.

Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, and uRPF).

This command reference includes:

·     AAA.

·     802.1X.

·     MAC authentication.

·     Portal.

·     Web authentication.

·     Port security.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec.

·     SSH.

·     SSL.

·     Attack detection and prevention.

·     TCP attack prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     MFF.

·     FIPS.

·     MACsec.

·     802.1X client.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This command reference includes:

·     Ethernet OAM.

·     DLDP.

·     RRPP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     Error code detection.

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This command reference includes:

·     System maintenance and debugging.

·     NQA.

·     iNQA.

·     NTP.

·     PTP.

·     PoE.

·     SNMP.

·     RMON.

·     NETCONF.

·     SmartMC.

·     CWMP.

·     EAA.

·     Process monitoring and maintenance.

·     Sampler.

·     Mirroring.

·     sFlow.

·     Information center.

·     Packet capture.

·     VCF fabric.

·     Cloud connection.

·     Performance management.

Telemetry Command Reference

Covers the telemetry-related commands.

This command reference includes:

·     gRPC.

·     Flow group.

·     MOD.

OpenFlow Command Reference

Covers the OpenFlow configuration commands.

VXLAN Command Reference

Covers the VXLAN configuration commands.

EVPN Command Reference

Covers the EVPN configuration commands.