Fundamentals Configuration Guide

Covers information about using the command line interface, logging in to and setting up the device, and using the basic management features.

This guide includes:

·     CLI.

·     RBAC.

·     Logging in to the switch.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Multichassis configuration sync.

·     Software upgrade.

·     ISSU.

·     GIR.

·     Automatic configuration.

·     Device management.

·     Target configuration management.

·     Tcl.

·     Python.

·     License management.

Virtual Technologies Configuration Guide

Covers the IRF technology, which provides data center class availability and scalability.

Layer 2—LAN Switching Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched network, such as VLAN technology and port isolation. You can use these features to divide broadcast domains, remove Layer 2 loops, isolate users within a VLAN, re-mark VLAN tags, or implement VLAN VPNs over the Internet.

This guide includes:

·     MAC address table.

·     PFC

·     Bulk interface configuration.

·     Ethernet interface.

·     Ethernet link aggregation.

·     M-LAG.

·     Port isolation.

·     VLAN.

·     MVRP.

·     Loopback, null, and inloopback interfaces.

·     QinQ.

·     VLAN mapping.

·     Loopback detection.

·     Spanning tree.

·     LLDP.

·     L2PT.

·     Cut-through Layer 2 forwarding configuration.

Layer 3—IP Services Configuration Guide

Covers IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.

This guide includes:

·     ARP.

·     IP addressing.

·     DHCP.

·     DNS.

·     mDNS gateway.

·     mDNS relay.

·     IP forwarding basics.

·     Fast forwarding.

·     Adjacency table.

·     IRDP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6.

·     IPv6 fast forwarding.

·     Tunneling.

·     HTTP redirect.

Layer 3—IP Routing Configuration Guide

Covers the routing technologies for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing.

This guide includes:

·     IP routing basics.

·     Static routing.

·     RIP.

·     OSPF.

·     IS-IS.

·     BGP.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

·     DCN.

·     Dual-stack PBR.

IP Multicast Configuration Guide

Covers Layer 2 IPv4 multicast protocols (including IGMP snooping, and multicast VLAN), Layer 3 IPv4 multicast protocols (including IGMP and PIM), Layer 2 IPv6 multicast protocols (including MLD snooping and IPv6 multicast VLAN), and Layer 3 IPv6 multicast protocols (including MLD, IPv6 PIM, and MSDP).

This guide includes:

·     Multicast overview.

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     Multicast routing and forwarding.

·     IGMP.

·     PIM.

·     MSDP.

·     MLD snooping.

·     IPv6 PIM snooping.

·     IPv6 multicast VLAN.

·     IPv6 multicast routing and forwarding.

·     MLD.

·     IPv6 PIM.

MPLS Configuration Guide

Covers MPLS features.

This guide includes:

·     Basic MPLS.

·     Static LSP.

·     LDP.

·     Tunnel policy.

·     MPLS L3VPN.

·     MPLS L2VPN.

·     VPLS.

·     MPLS OAM.

·     MCE.

ACL and QoS Configuration Guide

Covers information about classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This guide includes:

·     ACL.

·     QoS.

·     Data buffer.

·     Time range.

Security Configuration Guide

Covers security features. Available security features include identity authentication (AAA and PKI), access security (802.1X, MAC authentication, portal, and port security), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, MFF, and uRPF).

This guide includes:

·     AAA.

·     802.1X.

·     MAC authentication.

·     Portal.

·     Web authentication.

·     Triple authentication.

·     Port security.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec.

·     SSH.

·     SSL.

·     Attack detection and prevention.

·     TCP attack prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     uRPF.

·     MFF.

·     FIPS.

·     MACsec.

·     802.1X client.

·     Object group.

High Availability Configuration Guide

Covers high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This guide includes:

·     Ethernet OAM.

·     DLDP.

·     RRPP.

·     ERPS.

·     Smart Link.

·     Monitor Link.

·     Error code detection.

·     VRRP.

·     BFD.

·     Track.

·     Process placement.

·     Interface collaboration.

Network Management and Monitoring Configuration Guide

Covers features that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This guide includes:

·     System maintenance and debugging.

·     NQA.

·     iNQA.

·     NTP.

·     PTP.

·     SNMP.

·     RMON.

·     NETCONF.

·     Ansible configuration.

·     SmartMC.

·     EPA.

·     CWMP.

·     EAA.

·     Process monitoring and maintenance.

·     L2PT.

·     Sampler.

·     Mirroring.

·     sFlow.

·     Information center.

·     Packet capture.

·     VCF.

·     NetStream.

·     Cloud connection.

·     IPv6 NetStream.

·     Performance management.

·     eMDI.

·     SQA.

·     TCP connection trace.

Telemetry Configuration Guide

Covers the telemetry fundamentals and configuration procedures. You can use the telemetry technologies to remotely collect data from network devices, so as to monitor device performances and network operations.

This guide includes:

·     gRPC.

·     Flow group.

·     MOD.

OpenFlow Configuration Guide

Covers the OpenFlow fundamentals and configuration procedures. OpenFlow allows a controller to directly access and operate the forwarding plane of the switch, separating the control plane from the data plane. The switch matches and forwards packets according to the flow tables deployed by the controller.

VXLAN Configuration Guide

Covers the VXLAN fundamentals and configuration procedures.

EVPN Configuration Guide

Covers the EVPN fundamentals and configuration procedures.

TAP Configuration Guide

Covers the TAP fundamentals and configuration procedures.