Login
- Released At: 10-01-2025
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C SecPath NS-C600-CGQ6A1-G interface module
1 Identifier
The module identifier NS-C600-CGQ6A1-G is in the upper right corner of the front panel.
2 About the module
The NS-C600-CGQ6A1-G interface module provides eight 100-GE fiber ports.
3 Specifications
Figure 1 Front panel
|
(1) Ejector lever |
(2) 100-GE fiber ports |
|
(3) 100-GE fiber port LEDs |
|
Table 1 Module specifications
|
Item |
Specification |
|
Dimensions (H × W × D) |
44.0 × 192 × 366 mm (1.73 × 7.56 × 14.41 in) |
|
Power consumption |
23.99 W to 53.83 W |
|
Net weight |
1.5 Kg (3.31 lb) |
|
Hot swapping |
Supported |
|
Ports |
8 × 100GBASE-R QSFP28 fiber ports |
|
Connector type |
LC/MPO |
|
Available transceiver modules |
|
|
Compatible interface switch modules and slots |
· M9000-X06 multiservice security gateway (NSQM7MBSHA0-G interface switch module slots 1 and 2) · M9000-X10 multiservice security gateway (NSQM7MBSHA0-G interface switch module slots 1 and 2) · M9000-X06 multiservice security gateway (NSQM7MBSHB0-G interface switch module slots 1 and 2) · M9000-X10 multiservice security gateway (NSQM7MBSHB0-G interface switch module slots 1 and 2) |
The 100-GE fiber ports support QSFP+ transceiver modules described in Table 2 and QSFP28 transceiver modules described in Table 3.
Table 2 QSFP+ transceiver modules available for the 100GBASE-R QSFP28 fiber ports
|
Module |
Central wavelength (nm) |
Connector type |
Cable specifications (µm) |
Modal bandwidth (MHz × km) |
Maximum transmission distance |
|
QSFP-40G-SR4-MM850 |
850 |
MPO |
50/125, MMF |
2000 |
100 m (328.08 ft) |
|
QSFP-40G-LR4-WDM1300 |
1310 |
LC |
9/125, SMF |
N/A |
10 km (6.21 miles) |
|
QSFP-40G-CSR4-MM850 |
850 |
MPO |
50/125, MMF |
2000 |
300 m (984.25 ft) |
|
QSFP-40G-LR4L-WDM1300 |
1310 |
LC |
9/125, SMF |
N/A |
2 km (1.24 miles) |
|
QSFP-40G-BIDI-SR-MM850 |
850 |
LC |
50/125, MMF |
2000 |
100 m (328.08 ft) |
|
QSFP-40G-ER4-WDM1300 |
1310nm |
LC |
9/125, SMF |
- |
40 km (24.84 miles) |
|
QSFP-40G-LX4-WDM1300 |
1310nm |
LC |
50/125, MMF |
2000(MHz*km) |
150m(492.12 ft) |
|
QSFP-40G-BIDI-WDM850 |
850nm |
LC |
50/125, MMF |
2000 |
300 m (984.25 ft) |
|
|
NOTE: All 100-GE fiber ports on the NS-C600-CGQ6A1-G interface module support 40 Gbps autosensing. |
The 100GBASE-R QSFP28 fiber ports support QSFP28 transceiver modules described in Table 3.
Table 3 QSFP28 transceiver modules available for the 100GBASE-R-QSFP28 fiber ports
|
Module |
Central wavelength (nm) |
Connector type |
Cable specifications (µm) |
Maximum transmission distance |
|
QSFP-100G-SR4-MM850 |
850 |
MPO |
50/125, MMF |
100 m (328.08 ft) |
|
QSFP-100G-LR4-WDM1300 |
1310 |
LC |
50/125, SMF |
10 km (6.21 miles) |
|
QSFP-100G-LR4L-WDM1300 |
1310 |
LC |
9/125, SMF |
2 km (1.24 miles) |
|
QSFP-100G-ER4-WDM1300 |
1300 |
LC |
9/125, SMF |
40 km (24.86 miles) |
|
QSFP-100G-SWDM4-MM850 |
850 |
LC |
50/125, SMF |
100 m (328.08 ft) |
|
QSFP-100G-eSR4-MM850 |
850 |
MPO |
50/125, SMF |
300 m (984.25 ft) |
4 LEDs
The module provides a LED for each 100-GE fiber port to indicate their operating status.
Table 4 100-GE fiber port LED description
|
Status |
Description |
|
Flashing |
The port is sending or receiving data. |
|
Steady on |
A link is present on the port. |
|
Off |
No link is present on the port. |
5 Related documentation
For information about installing the module, see the installation guide for the device.
Copyright © 2024 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
