Login
- Released At: 05-07-2025
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
H3C U-Center UCP 5.0
Alarm Messages
Document version: 5W100-20250703
Copyright © 2025 New H3C Technologies Co., Ltd. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of New H3C Technologies Co., Ltd.
Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this document are the property of their respective owners. The information in this document is subject to change without notice.
Introduction
Traps record internal events that occur on the UCP component to provide reference for system analysis and maintenance. Alarm information includes trap OID, trap details, and related parameters.
This document assumes that the readers are familiar with data communications technologies and the UCP component.
UCP alarms include IOM alarms and capacity alarms. This document describes only capacity alarms. For IOM alarms, see H3C U-Center IOM 5.0 Alarm Messages.
Viewing alarm information
1. Log in to Unified Platform. On the top navigation bar, click Monitor. From the navigation pane, select Alarm Management > Active Alarms. The alarm list displays alarms generated by all components on Unified Platform, as shown in Figure 1.
2. To view UCP capacity alarms, click the 
icon
at the top right of the page, and then select service
resource capacity alarms from the alarm categories
list.
Table 1 Alarm fields
|
Field |
Description |
|
Severity |
Alarm severity, including Critical, Major, Minor, Warning, and Info. |
|
Alarm Source |
Name and IP address of the resource that generated the alarm. |
|
Alarm Info |
Information in the alarm. If the alarm does not contain any information, this field displays the alarm OID. |
|
Clearing State |
Options: · Active—The alarm has not been cleared. · Auto Cleared—The alarm has been cleared by the system. · Cleared (operator name)—The operator has cleared the alarm. |
|
Ack State |
Options: · Unacked—The alarm has not been acknowledged. · Acked (operator name)—The operator has acknowledged the alarm. |
|
First Alarm |
Time when the system first received the alarm. |
|
Most Recent Time |
Time when the system last received the alarm. |
|
Occurrences |
If you enable duplicate alarm counting in alarm settings, the system adds the number of occurrences for an alarm rather than generating a new alarm when it receives a duplicate alarm. |
|
Duration |
Duration from when the system received an alarm until the alarm was cleared. |
Alarm severities
Table 2 Trap severities
|
Severity level |
Severity |
Description |
|
1 |
Critical |
The issue affects the services provided by the system and requires immediate actions. |
|
2 |
Major |
For example, if a device or resource is completely unavailable and requires restoration, take immediate actions even if the issue occurs outside of working hours. |
|
3 |
Minor |
The issue affects service quality and requires immediate action. |
|
4 |
Warning |
For example, if the service quality for a device or resource deteriorates, you must take immediate actions to restore it to full capacity during working hours. |
|
5 |
Info |
No negative impact on the system. |
Capacity alarms
This section contains the UCP component capacity alarms.
Capacity forecast alarm
|
Trap OID |
1.3.6.1.4.1.25506.4.2.75.2.0.1 |
|
Trap OIDV1 |
1.3.6.1.4.1.25506.4.2.75.2.1 |
|
Trap OIDV2 |
1.3.6.1.4.1.25506.4.2.75.2.0.1 |
|
Recovery trap |
1.3.6.1.4.1.25506.4.2.75.2.0.2 |
|
Trap name |
Capacity forecast alarm |
|
Enterprise name |
NMS CAPACITY |
|
Trap level |
Info |
|
Trap details |
Resource ($2)'s $7 capacity is predicted to generate a "$3 (Info: 5, Warning: 4, Minor: 3, Major: 2, Critical: 1)" alarm. It is predicted to reach $5 at $6, meeting the trigger condition: $4. |
|
Relevant parameters |
· $1: Parameter Name=Capacity Resource ID. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.1. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $2: Parameter Name=Capacity Resource Name. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.2. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $3: Parameter Name=Alarm Level. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.3. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Alarm severity. · $4: Parameter Name=Threshold Value. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.4. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $5: Parameter Name=Current Value. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.5. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $6: Parameter Name=Occur Time. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.6. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $7: Parameter Name=Item Name. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.7. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $8: Parameter Name= Item key. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.8. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $9: Parameter Name=Alarm Level Alias. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.9. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $10: Parameter Name=Hold Info. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.10. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $11: Parameter Name=Source Type. Parameter OID=1.3.6.1.4.1.25506.4.2.2.1.100. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $12: Parameter Name=Source Key. Parameter OID=1.3.6.1.4.1.25506.4.2.2.1.101. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $13: Parameter Name=SourceLableName. Parameter OID=1.3.6.1.4.1.25506.4.2.2.1.102. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $14: Parameter Name=SourceLableIP. Parameter OID=11.3.6.1.4.1.25506.4.2.2.1.103. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. |
|
Impact |
No negative impact on the system. |
|
Cause |
The resource capacity is predicted to exceed the specified threshold on a future day. |
|
Recommended action |
Adjust the threshold to a reasonable value based on actual needs and resource usage. |
Capacity forecast alarm recovery
|
Trap OID |
1.3.6.1.4.1.25506.4.2.75.2.0.2 |
|
Trap OIDV1 |
1.3.6.1.4.1.25506.4.2.75.2.2 |
|
Trap OIDV2 |
1.3.6.1.4.1.25506.4.2.75.2.0.2 |
|
Recovery trap |
N/A |
|
Trap name |
Capacity forecast alarm recovery |
|
Enterprise name |
NMS CAPACITY |
|
Trap level |
Info |
|
Trap details |
Resource ($2)'s $7 capacity is predicted to generate a "$9 (Info: 5, Warning: 4, Minor: 3, Major: 2, Critical: 1)" alarm recovery notification. Predicted time point: $6, predicted value: $5. |
|
Relevant parameters |
· $1: Parameter Name=Capacity Resource ID. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.1. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $2: Parameter Name=Capacity Resource Name. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.2. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $3: Parameter Name=Alarm Level. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.3. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Alarm severity. · $4: Parameter Name=Threshold Value. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.4. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $5: Parameter Name=Current Value. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.5. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $6: Parameter Name=Occur Time. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.6. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $7: Parameter Name=Item Name. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.7. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $8: Parameter Name= Item key. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.8. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $9: Parameter Name=Alarm Level Alias. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.9. Parameter Type=OctetString. Key Parameter=Yes. Parameter ID=Normal parameter. · $10: Parameter Name=Hold Info. Parameter OID=1.3.6.1.4.1.25506.4.2.75.1.10. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $11: Parameter Name=Source Type. Parameter OID=1.3.6.1.4.1.25506.4.2.2.1.100. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $12: Parameter Name=Source Key. Parameter OID=1.3.6.1.4.1.25506.4.2.2.1.101. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $13: Parameter Name=SourceLableName. Parameter OID=1.3.6.1.4.1.25506.4.2.2.1.102. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. · $14: Parameter Name=SourceLableIP. Parameter OID=1.3.6.1.4.1.25506.4.2.2.1.103. Parameter Type=OctetString. Key Parameter=No. Parameter ID=Normal parameter. |
|
Impact |
No negative impact on the system. |
|
Cause |
The predicted resource capacity has dropped below the alarm threshold. The storage capacity predict alarm is cleared. |
|
Recommended action |
No action is required. |