00-About the Command References

HomeSupportResource CenterReference GuidesCommand ReferencesH3C MSR1000[2600][3600] Routers Command Reference(V9)-R9119-6W10000-About the Command References
Download Book
Title Size Downloads
00-About the Command References-book.pdf 35.26 KB
Table of Contents
Related Documents

About the H3C MSR1000[2600][3600] Routers command references

The H3C MSR1000[2600][3600] Routers command references describe the commands and command syntax options available for the H3C MSR1000[2600][3600] Routers.

 

Command reference

Content

Fundamentals Command Reference

Covers the commands for logging in to and setting up the converged gateway. This command reference includes:

·     CLI

·     RBAC

·     Login management

·     FTP and TFTP

·     File system management

·     Configuration file management

·     Software upgrade

·     Emergency shell

License Management Command Reference

Covers the commands for License management.

System Management Command Reference

Covers the commands for configuring system management features.This command reference includes:

·     Basic device management

·     Device hardening

·     Hardware resource management

·     EAA

·     Process monitoring and maintenance

·     Fast log output

·     Flow log

·     Information center

Interface Command Reference

Covers the interface configuration commands. This command reference includes:

·     Common interface

·     Bulk interface

·     Ethernet interface

·     WAN interface

·     Loopback, null, and inloopback interface

·     Tunnel interface

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC address table

·     Ethernet link aggregation

·     Port isolation

·     VLAN

·     VLAN termination

·     Loop detection

·     Spanning tree

·     LLDP

·     Layer 2 forwarding

Layer 2—WAN Access Command Reference

Covers the commands for configuring WAN access technologies. This command reference includes:

·     PPP

·     HDL

·     Mobile communication modem management

·     DDR

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP

·     IP addressing

·     DHCP

·     DNS

·     HTTP

·     IP forwarding basics

·     Fast forwarding

·     Adjacency table

·     IRDP

·     IP performance optimization

·     UDP helper

·     IPv6 basics

·     IPv6 neighbor discovery

·     DHCPv6

·     IPv6 fast forwarding

·     IPv6 transition technologies

·     WAAS

·     HTTP redirect

·     Web caching

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     Basic IP routing

·     Static routing

·     RIP

·     OSPF

·     IS-IS

·     Basic BGP

·     Advanced BGP

·     Policy-based routing

·     IPv6 static routing

·     RIPng

·     OSPFv3

·     IPv6 policy-based routing

·     Routing policy

·     DCN

·     RIR

Multicast Command Reference

Covers the commands for Layer 3 multicast protocols. This command reference includes:

·     IGMP snooping

·     Multicast routing and forwarding

·     IGMP

·     PIM

·     MSDP

·     Multicast VPN

·     MLD snooping

·     IPv6 multicast routing and forwarding

·     MLD

·     IPv6 PIM

MPLS Command Reference

Covers the commands to configure MPLS and MPLS VPN. This command reference includes:

·     Basic MPLS

·     Static LSP

·     LDP

·     MPLS TE

·     Static CRLSP

·     RSVP

·     Tunnel policy

·     MPLS L3VPN

·     IPv6 MPLS L3VPN

·     MPLS L2VPN

·     VPLS

·     MPLS OAM

·     MCE

Segment Routing Command Reference

Covers the commands for configuring Segment Routing.This command reference includes:

·     SR-MPLS

·     SRv6

·     SRv6 TE policy

·     SRv6 VPN

·     SRv6 OAM

·     SRv6 service chain

VXLAN Command Reference

Covers the commands for configuring VXLAN features.This command reference includes:

·     Basic VXLAN

·     VXLAN IP gateway

EVPN Command Reference

Covers the commands for configuring EVPN features.

SDWAN Command Reference

Covers the commands for SDWAN.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS

·     MPLS QoS

·     Time range

·     Flowspec

IP Tunneling and Security VPN Command Reference

Covers the commands for configuring IP tunneling and security VPN features.This command reference includes:

·     GRE

·     ADVPN

·     IPsec

·     IKE

·     IKEv2

·     Group domain VPN

User Access and Authentication Command Reference

Covers the commands for configuring user access and authentication features.This command reference includes:

·     AAA

·     802.1X

·     MAC authentication

·     Portal

·     Port security

·     PPPoE

·     L2TP

·     User profile

·     Password control

NAT Command Reference

Covers NAT commands.This command reference includes:

·     NAT

·     AFT

·     NAT66

·     STUN

Security Command Reference

Covers security feature commands. This command reference includes:

·     Object group

·     Keychain

·     Public key management

·     PKI

·     Crypto engine

·     SSH

·     SSL

·     Security zone

·     Packet filter

·     ASPF

·     Security policy

·     Session management

·     DHCP snooping

·     DHCPv6 snooping

·     ARP attack protection

·     ND attack defense

·     Attack detection and prevention

·     mGRE

·     Connection limit

·     IP-based attack prevention

·     IP source guard

·     Urpf

·     APR

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Interface backup

·     CFD

·     DLDP

·     Error code detection

·     VRRP

·     BFD

·     Track

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes:

·     Ping and tracert

·     System debugging

·     NQA

·     iNQA

·     NTP

·     SNMP

·     RMON

·     Event MIB

·     CWMP

·     Sampler

·     Mirroring

·     NetStream

·     IPv6 NetStream

·     Cloud connection

·     iFIT

·     Packet capture

Telemetry Command Reference

Covers the commands for configuring gRPC.

Network Programmability Command Reference

Covers the commands for configuring network programmability features.This command reference includes:

·     RESTful

·     Tcl

·     Python

·     NETCONF

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.

DPI Command Reference

Covers the commands for configuring IPS.