Country / Region
H3C S6850 high-density intelligent switch series is developed for data centers and cloud computing networks. It provides powerful hardware forwarding capacity and abundant data center features. It provides up to 48*25G ports and 8*100G ports. The switch supports redundant and hot-swappable power supplies and fans. By using different fan trays, the switch can provide field-changeable airflows.
The switch is an ideal product for high-density 25GE switching and aggregation at data centers and cloud computing networks. It can also operate as a TOR access switch on an overlay or integrated network.
The S6850 series come in the following models.
LS-6850-56HF: The switch provides 48 × 25G SFP28 ports, 8 × 100G QSFP28 ports, and 2 × 1G SFP ports
LS-6850-56HF-H3: The switch provides 48 × 25G SFP28 ports, 8 × 100G QSFP28 ports. 25GE SFP28 Ethernet optical interface supports autosensing down to 10GE/1GE.
LS-S6850-2C: The switch provides 2 service slots, 2 × 100G QSFP28 ports
The following contents are complex, and it is recommended to browse on PC.
Enter c.h3c.com.cn on the PC browser and operate according to the page to synchronize to the PC and continue browsing.
Continue by mobile
The switch offers high-density 100G/40G/25G/10G ports and a wire-speed forwarding capacity as high as 4 Tbps. With standard 25G ports, it can provide high-density server access in high-end data centers.
Facing the application requirements of the unified switching architecture of the data center, the series switches support the IRF2 technology, which virtualizes multiple devices into one logical.
The equipment has strong advantages in scalability, reliability, distributed and availability.
IRF2 not only can achieve a long-distance intelligent elastic architecture within a rack, across racks, and even across regions.
The switch supports abundant data center features, including:
H3C S6850 switch series supports VXLAN (Virtual Extensible LAN), which provides two major benefits, higher scalability of Layer 2 segmentation and better utilization of available network paths.
H3C S6850 switch series supports MP-BGP EVPN (Multiprotocol Border Gateway Protocol Ethernet Virtual Private Network) which can run as VXLAN control plane to simplify VXLAN configuration, eliminate traffic flooding and reduce full mesh requirements between VTEPs via the introduction of BGP RR.
H3C S6850 switch series support Fiber Channel over Ethernet (FCoE), which permits storage, data, and computing services to be transmitted on one network, reducing the costs of network construction and maintenance.
H3C S6850 switch series support Priority-based Flow Control (PFC), Enhanced Transmission Selection (ETS) and Data Center Bridging eXchange (DCBX). These features ensure low latency and zero packet loss for FC storage, RDMA applications and high-speed computing services.
H3C S6850 switch series support DRNI(M-LAG), which enables links of multiple switches to aggregate into one to implement device-level link backup. DRNI is applicable to servers dual-homed to a pair of access devices for node redundancy.
Streamlined topology: DRNI simplifies the network topology and spanning tree configuration by virtualizing two physical devices into one logical device.
Independent upgrading: The DR member devices can be upgraded independently one by one to minimize the impact on traffic forwarding.
High availability: The DR system uses a keepalive link to detect multi-active collision to ensure that only one member device forwards traffic after a DR system splits.
With the rapid development of data center, the scale of the data center expands rapidly; reliability, operation and maintenance become the bottleneck of data center for further expansion. H3C S6850 switch series conform to the trend of automated data operation and maintenance, and support visualization of data center.
INT (Inband-Telemetry) is a network monitoring technology used to collect data from the device. Compared with the traditional network monitoring technology featuring one query, one reporting, INT requires only one-time configuration for continuous data reporting, thereby reducing the request processing load of the device. INT can collect timestamp information, device ID, port information, and buffer information in real time. INT can be implemented in IP, EVPN, and VXLAN networks.
Provides a variety of traffic monitoring and analytic tools, including sFlow, NetStream, SPAN/RSPAN/ERSPAN mirroring, and port mirroring to help customers perform precise traffic analysis and gain visibility into network application traffic. With these tools, customers can collect network traffic data to evaluate network health status, create traffic analysis reports, perform traffic engineering, and optimize resource allocation.
Supports realtime monitoring of buffer and port queues, allowing for visible and dynamic network optimization.
Supports PTP (Precision Time Protocol) to achieve highly precise clock synchronization.
Remote Direct Memory Access (RDMA) directly transmits the user application data to the storage space of the servers, and uses the network to fast transmit the data from the local system to the storage of the remote system. RDMA eliminates multiple data copying and context switching operations during the transmission process, and reduces the CPU load.
RoCE supports RDMA on standard Ethernet infrastructures. H3C S6850 switch support RoCE and can be used to build a lossless Ethernet network to ensure zero packet loss.
RoCE include the following key features,include PFC(Priority based Flow Control), ECN(Explicit Congestion Notification), DCBX(Data Center Bridging Capability Exchange Protocol), ETS(Enhanced Transmission Selection).
The switch uses industry-leading programmable switching chips that allow users to define the forwarding logic as needed.
Users can develop new features that meet the evolving trend of their networks through simple software updates.
H3C S6850 switch series adopt the next-generation chip with more flexible Openflow FlowTable, more resources and accurate ACL matching, which greatly improves the software-defined network (SDN) capabilities and meet the demand of data center SDN network.
H3C S6850 switch series can interconnect with H3C SeerEngine-DC Controller through standard protocols such as OVSDB, Netconf and SNMP to implement network automatic deployment and configuration.
H3C S6850 series switch supports AAA, RADIUS and user account based authentication, IP, MAC, VLAN, port-based user identification, dynamic and static binding; when working with the H3C iMC platform, it can conduct real time management, instant diagnosis and crackdown on illicit network behavior.
H3C S6850 series switch supports enhanced ACL control logic, which enables an enormous amount of inbound and outbound ACL, and delegate VLAN based ACL. This simplifies user deployment process and avoids ACL resource wastage. S6850 series switch can also take advantage of Unicast Reverse Path Forwarding (Unicast RFP). When the device receives a packet, it will perform the reverse check to verify the source address from which the packets are supposedly originated, and will drop the packet if such path doesn’t exist. This can effectively prevent the source address spoofing in the network.
The S6850 series switch provides multiple reliability protection at both switch and link levels. With over current, overvoltage, and overheat protection, all models have a redundant pluggable power module, which enables flexible configuration of AC or DC power modules based on actual needs. The entire switch supports fault detection and alarm for power supply and fan, allowing fan speed to change to suit different ambient temperatures.
The switch supports diverse link redundancy technologies such as H3C proprietary RRPP, VRRPE, and Smart Link. These technologies ensure quick network convergence even when large amount of traffic of multiple services runs on the network.
To cope with data center cooling aisle design, the H3C S6850 series switch comes with flexible airflow design, which features bi-cooling aisles in the front and back. Users may also choose the direction of airflow (from front to back or vice versa) by selecting a different fan tray.
The switch improves system management through the following ways:
Provides multiple management interfaces, including the serial console port, mini USB console port, USB port, two out-of-band management ports, and two SFP ports. The SFP ports can be used as in-band management port through which encapsulated sampling packets are sent to the controller or other management devices for deep analysis.
Supports multiple access methods, including SNMPv1/v2c/v3, CLI, Telnet, Console port, SSH 2.0, SSL, and FTP.config
Supports standard NETCONF APIs that allow users to configure and manage the switch, enhancing the compatibility with third-party applications.
Item | S6850-56HF | S6850-56HF | S6850-2C |
PID | LS-6850-56HF | LS-6850-56HF-H3 | LS-6850-2C/LS-6850-2C-H1 |
Dimensions (H × W × D) | 43.6 × 440 × 460 mm (1.72 × 17.32 × 18.11 in) | Without package: 44 × 440 × 400 mm (1.73 × 17.32 × 15.75 in) With package: 150 × 658 × 556 mm (5.91 × 25.91 × 21.89 in) | 44.2 × 440 × 660 mm (1.74 × 17.32 × 18.11 in) |
Weight | ≤ 15 kg (33.07 lb) | ≤ 10 kg (22.05 lb) | ≤ 16 kg (35.27 lb) |
Serial console port | 1*RJ45 | ||
Out-of-band management port | One GE copper port and one GE fiber port | 1 ×10/100/1000BASE-T | One GE copper port and one GE fiber port |
Mini USB console port | 1 | - | 1 |
USB port | 1 | 1 | 1 |
QSFP28 port | 8 | 8 | 2 |
SFP28 port | 48 | 48 | - |
SFP port | 2 | - | - |
Expansion slot | - | - | 2 |
CPU | C2000, 2.4GHz@4Core | C3000,2.2GHz@4Core | LS-6850-2C: C2000, 2.4 GHz@4 Cores LS-6850-2C-H1: C3000,2.2GHz@4Core |
Flash/SDRAM | 4GB/8GB | 4GB/8GB | 4GB/8GB |
Latency | <1μs | <1μs | <1μs |
Switching capacity | 4 Tbps | 4 Tbps | 3.6Tbps |
Forwarding capacity | 2024 Mpps | 2024 Mpps | 2024 Mpps |
Buffer(byte) | 32M | 32M | 32M |
AC-input voltage | 90v AC to 264v AC | 90v AC to 264v AC | 90v AC to 264v AC |
DC-input voltage | –40v DC to –72v DC | 190v DC to 310v DC | –40v DC to –72v DC |
Power module slot | 2 | 2 | 2 |
Fan tray slot | 5 Hot-swappable fan, fan speed adjustable and wind invertible | 4 Hot-swappable fan, fan speed adjustable and wind invertible | 5 Hot-swappable fan, fan speed adjustable and wind invertible |
Air flow direction | From front to rear or from rear to front | From front to rear or from rear to front | From front to rear or from rear to front |
Typical power consumption (Fully configured with copper cables, at 50% load) | Single AC input: 201 W Dual AC inputs: 224 W Single DC input: 198 W Dual DC inputs: 210 W | Single AC input: 143 W Dual AC inputs: 150 W | With two LSWM18CQ modules: 282 W With two LSWM18CQMSEC modules: 326 W With two LSWM116Q modules: 260 W With two LSWM18QC modules: 230 W With two LSWM124XG2Q modules: 286 W With two LSWM124XGT2Q modules: 348 W With two LSWM124XG2QFC modules: 286 W With two LSWM124XG2QL modules: 242 W With two LSWM124TG2H modules: 282 W With two LSWM116FC modules: 260 W |
Maximum power consumption (Fully configured with transceiver modules, at 100% load) | Single AC input: 405 W Single DC input: 400 W Dual DC inputs: 408 W | Single AC input: 424 W Dual AC inputs: 429 W | With two LSWM18CQ modules: 421 W With two LSWM18CQMSEC modules: 451 W With two LSWM116Q modules: 385 W With two LSWM18QC modules: 325 W With two LSWM124XG2Q modules: 385 W With two LSWM124XGT2Q modules: 511 W With two LSWM124XG2QFC modules: 385 W With two LSWM124XG2QL modules: 337 W With two LSWM124TG2H modules: 421 W With two LSWM116FC modules: 385 W |
Maximum thermal consumption | Single AC input: 1382 BTU/hr Dual AC inputs: 1409 BTU/hr Single DC input: 1365 BTU/hr Dual DC inputs: 1392 BTU/hr | 1464 BTU/hr | With two LSWM18CQ modules: 1436 BTU/hr With two LSWM18CQMSEC modules: 1539 BTU/hr With two LSWM116Q modules: 1314 BTU/hr With two LSWM18QC modules: 1109 BTU/hr With two LSWM124XG2Q modules: 1314 BTU/hr With two LSWM124XGT2Q modules: 1744 BTU/hr With two LSWM124XG2QFC modules: 1314 BTU/hr With two LSWM124XG2QL modules: 1150 BTU/hr With two LSWM124TG2H modules: 1436 With two LSWM116FC modules: 1314 BTU/hr |
Operating temperature | 0-45℃(32°F to 113°F) | ||
Operating humidity | 5% to 95%, noncondensing | ||
MTBF(year) | 33.2 | 78.7 | 34 |
MTTR(hour) | 1 | 0.5 | 1 |
Item | Feature description |
Device Virtualization | IRF2.0 |
M-LAG(DRNI) | |
S-MLAG | |
Network Virtualization | BGP-EVPN |
VxLAN | |
EVPN ES | |
VxLAN | L2 VxLAN gateway |
L3 VxLAN gateway | |
Distributed VxLAN gateway | |
Centralized VxLAN gateway | |
EVPN VxLAN | |
manual configured VxLAN | |
IPv4 VxLAN tunnel | |
VxLAN | IPv6 VxLAN tunnel |
QinQ VxLAN access | |
SDN | H3C SeerEngine-DC |
Lossless network | PFC and ECN |
DCBX | |
RDMA and ROCE | |
PFC deadlock watchdog | |
ECN overlay | |
ROCE stream analysis | |
Programmability | Openflow1.3 |
Netconf | |
Ansible | |
Python//TCL/Restful API to realize DevOps automated operation and maintenance | |
Traffic analysis | Sflow |
Netstream, only S6850-2C | |
VLAN | Port-based VLANs |
Mac-based VLAN ,Subnet-based VLAN and Protocol VLAN | |
VLAN mapping | |
QinQ | |
MVRP(Multiple VLAN Registration Protocol) | |
Super VLAN | |
PVLAN | |
MAC address | Dynamic learning and aging of mac address entries |
Dynamic,static and blackhole entries | |
Mac address limiting on ports | |
IPv4 routing | RIP(Routing Information Protocol) v1/2 |
OSPF (Open Shortest Path First) v1/v2 | |
ISIS(Intermediate System to Intermediate system) | |
BGP (Border Gateway Protocol) | |
Routing policy | |
VRRP | |
PBR | |
IPv6 routing | RIPng |
OSPFv3 | |
IPv6 ISIS | |
BGP4+ | |
Routing policy | |
VRRP | |
PBR | |
MPLS/VPLS | Support L3 MPLS VPN |
Support L2 VPN: VLL (Martini, Kompella) | |
Support VPLS, VLL | |
Support hierarchical VPLS and QinQ+VPLS access | |
Support P/PE function | |
Support LDP protocol | |
MPLS/VPLS | Support MCE |
Support MPLS OAM | |
Multicast | IGMP snooping |
MLD snooping | |
IPv4 and IPv6 multicast VLAN | |
IPv4 and IPv6 PIM snooping | |
IGMP and MLD | |
PIM and IPv6 PIM | |
MSDP | |
Multicast VPN | |
Reliability | LACP |
STP/RSTP/MSTP protocol, PVST/PVST+/RPVST+compatible | |
STP Root Guard and BPDU Guard | |
RRPP and ERPS | |
Ethernet OAM | |
Smartlink | |
DLDP | |
BFD for OSPF/OSPFv3, BGP/BGP4, IS-IS/IS-ISv6, PIM/IPM for IPv6 and Static route | |
VRRP and VRRPE | |
QOS | Weighted Random Early Detection (WRED) and tail drop |
Flexible queue scheduling algorithms based on port and queue, including strict priority (SP), Weighted Deficit Round Robin (WDRR), Weighted Fair Queuing (WFQ), SP + WDRR, and SP + WFQ. | |
Traffic shaping | |
Packet filtering at L2 (Layer 2) through L4 (Layer 4); flow classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, port, protocol, and VLAN to apply qos policy,including mirroring,redirection,priority remark etc. | |
Committed access rate (CAR) | |
Account by packet and byte | |
COPP | |
FC/FOCE | FC, FC subcard is supported on S6850-2C |
FCOE | |
Telemetry | gRPC |
ERSPAN | |
Mirror on drop | |
Real-time telemetry. | |
Telemetry Stream | |
INT | |
iNQA | |
Packet trace, Packet capture |
ID | Standards And Protocols | |
IEEE | 1588-2008 | Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks |
IEEE | 802.1 | LAN/MAN Bridge and Management |
IEEE | 802.11-2007 | Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specification |
IEEE | 802.11a-1999 | High-speed Physical Layer in the 5GHz Band |
IEEE | 802.11ac | Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
IEEE | 802.11b-1999 | High-speed Physical Layer Extension in the 2.4GHz Band |
IEEE | 802.11d-1999 | Specifiation for operation in additional regulatory domain |
IEEE | 802.11g-2003 | Further High Data Rate Extension in the 2.4GHz Band |
IEEE | 802.11h-2003 | Spectrum and Transmit Power Management externsion in the 5GHz Band in Europe |
IEEE | 802.11i-2004 | Wi-Fi Protected Access |
IEEE | 802.11k | Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
IEEE | 802.11n | Enhancements for Higher Throughput |
IEEE | 802.11r | Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
IEEE | 802.11s | Wireless Medium Access Control (MAC) and physical layer (PHY) specifications: Amendment: ESS Mesh Networking |
IEEE | 802.11u | Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications |
IEEE | 802.11w | Wireless Medium Access Control (MAC) and physical layer (PHY) specifications Ammendment-w: Protected Management Frames |
IEEE | 802.17-2011 | Part 17: Resilient packet ring (RPR) access method and physical layer specifications |
IEEE | 802.1AB-2005 | IEEE Standard for Local and metropolitan area networks Station and Media Access Control Connectivity Discovery |
IEEE | 802.1AB-2009 | IEEE Standard for Local and metropolitan area networks Station and Media Access Control Connectivity Discovery |
IEEE | 802.1ad-2005 | Virtual Bridged Local Area Networks |
IEEE | 802.1AE-2006 | IEEE Standard for Local and metropolitan area networks—Port-Based Network Access Control Part 9:MACsec Key Agreement protocol (MKA) |
IEEE | 802.1ag-2007 | Virtual Bridged Local Area Networks Amendment 5: Connectivity Fault Management |
IEEE | 802.1ah-2008 | Virtual Bridged Local Area Networks—Amendment 6: Provider Backbone Bridges |
IEEE | 802.1ak-2007 | Virtual Bridged Local Area Networks—Amendment 7: Multiple Registration Protocol |
IEEE | 802.1aq | Shortest Path Bridging |
IEEE | 802.1AS-2011 | Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks |
IEEE | 802.1AX-2008 | Link Aggregation |
IEEE | 802.1br | Bridge Port Extension |
IEEE | 802.1D-2004 | Media Access Control (MAC) Bridges |
IEEE | 802.1p | Traffic Class Expediting and Dynamic Multicast Filtering |
IEEE | 802.1Q-2005 | Virtual Bridged Local Area Networks |
IEEE | 802.1Q-2011 | IEEE Standard for Local and metropolitan area networks——Media Access Control (MAC) Bridges and Virtual Bridge Local Area Networks |
IEEE | 802.1Qaz-2011 | Draft Standard for Local and Metropolitan Area Networks Virtual Bridged Local Area Networks Amendment 18: Enhanced Transmission Selection for Bandwidth Sharing Between Traffic Classes |
IEEE | 802.1Qbb-2011 | Media Access Control (MAC) Bridges and Virtual Bridged Local Area Networks—Amendment 17: Priority-based Flow Control |
IEEE | 802.1s-2002 | Virtual Bridged Local Area Networks—Amendment 3: Multiple Spanning Tree |
IEEE | 802.1t-2001 | Part 3: Media Access Control (MAC) Bridges—Amendment 1 |
IEEE | 802.1v-2001 | Virtual Bridged Local Area Networks—Amendment 2: VLAN Classification by Protocol and Port |
IEEE | 802.1w-2001 | Part 3:Media Access Control (MAC) Bridges—Amendment 2: Rapid Reconfiguration |
IEEE | 802.1X-2001 | Standard for Port based Network Access Control |
IEEE | 802.1X-2010 | IEEE Standard for Local and metropolitan area networks—Port-Based Network Access Control Part 9:MACsec Key Agreement protocol (MKA) |
IEEE | 802.2 | Logical Link Control |
IEEE | 802.3 | Carrier Sense Multiple Access with Collision Detection (CSMA/CD) access method and physical layer specifications |
IEEE | 802.3ab | 1000BASE-T Gbit/s Ethernet over twisted pair at 1 Gbit/s (125 MB/s) |
IEEE | 802.3ad-2000 | Link Aggregation Control Protocol |
IEEE | 802.3ae | Amendment 1:Media Access Control(MAC)Parameters, Physical Layers, and Management Parameters for 10 Gb/s Operation |
IEEE | 802.3ah-2004 | IEEE Standard for |
IEEE | 802.3z | 1000BASE-X Gbit/s Ethernet over Fiber-Optic at 1 Gbit/s (125 MB/s) |
IETF | RFC0768 | User Datagram Protocol |
IETF | RFC0791 | Internet Protocol |
IETF | RFC0792 | Internet Standard Subnetting Procedure |
IETF | RFC0793 | Transmission Control Protocol |
IETF | RFC0826 | Ethernet Address Resolution Protocol: Or Converting Network Protocol Addresses to 48.bit Ethernet Address for Transmission on Ethernet Hardware |
IETF | RFC0854 | Telnet Protocol Specification |
IETF | RFC0855 | Telnet Option Specifications |
IETF | RFC0856 | Telnet Binary Transmission |
IETF | RFC0857 | Telnet Echo Option |
IETF | RFC0858 | Telnet Suppress Go Ahead Option |
IETF | RFC0862 | Character Generator Protocol |
IETF | RFC0864 | Character Generator Protocol |
IETF | RFC0894 | A Standard for the Transmission of IP Datagrams over Ethernet Networks |
IETF | RFC0919 | Broadcasting Internet Datagrams |
IETF | RFC0922 | Broadcasting Internet Datagrams in the Presence of Subnets (IP_BROAD) |
IETF | RFC0950 | Internet Standard Subnetting Procedure |
IETF | RFC0959 | FILE TRANSFER PROTOCOL (FTP) |
IETF | RFC1034 | Domain names - implementation and specification |
IETF | RFC1035 | Domain names - implementation and specification |
IETF | RFC1112 | Host Extensions for IP Multicasting |
IETF | RFC1119 | Network Time Protocol (version 2) specification and implementation |
IETF | RFC1122 | Requirements for Internet Hosts - Communication Layers |
IETF | RFC1155 | Structure and identification of management information for TCP/IP-based internets |
IETF | RFC1212 | Concise MIB definitions. |
IETF | RFC1213 | RADIUS Accounting |
IETF | RFC1350 | Trivial File Transfer Protocol(TFTP). |
IETF | RFC1661 | The Point-to-Point Protocol (PPP) |
IETF | RFC1662 | PPP in HDLC-like Framing |
IETF | RFC1722 | RIP Version 2 Protocol Applicability Statement |
IETF | RFC1723 | RIP Version 2 Carrying Additional Information |
IETF | RFC2085 | HMAC-MD5 IP Authentication with Replay Prevention |
IETF | RFC2228 | FTP Security Extensions |
IETF | RFC2328 | OSPF Version 2 |
IETF | RFC2427 | Multiprotocol Interconnect over Frame Relay |
IETF | RFC2453 | RIP Version 2 |
IETF | RFC2578 | Structure of Management Information Version 2 (SMIv2). |
IETF | RFC2579 | Textual Conventions for SMIv2. |
IETF | RFC2580 | Conformance Statements for SMIv2. |
IETF | RFC2819 | Remote Network Monitoring Management Information Base |
IETF | RFC2981 | Event MIB |
IETF | RFC3019 | Multicast Listener Discovery Protocol MIB used for managing MLD version 1. |
IETF | RFC3398 | Integrated Services Digital Network (ISDN) User Part (ISUP) to Session Initiation Protocol (SIP) Mapping |
IETF | RFC3411 | An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks. |
IETF | RFC3412 | Message Processing and Dispatching for the Simple Network Management Protocol (SNMP). |
IETF | RFC3413 | Simple Network Management Protocol (SNMP) Applications. |
IETF | RFC3414 | User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3). |
IETF | RFC3415 | View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP). |
IETF | RFC3416 | Version 2 of the Protocol Operations for the Simple Network Management Protocol (SNMP). |
IETF | RFC3417 | Transport Mappings for the Simple Network Management Protocol (SNMP). |
IETF | RFC3418 | Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework. |
IETF | RFC3420 | Internet Media Type message/sipfrag |
IETF | RFC3489 | STUN - Simple Traversal of User Datagram Protocol (UDP) Through Network Address Translators (NATs) |
IETF | RFC3576 | Dynamic Authorization Extensions to Remote Authentication Dial In User Service (RADIUS) |
IETF | RFC3925 | Vendor-Identifying Vendor Options for Dynamic Host Configuration Protocol version 4 (DHCPv4) |
IETF | RFC3947 | Negotiation of NAT-Traversal in the IKE. |
IETF | RFC3966 | The tel URI for Telephone Numbers |
IETF | RFC3970 | A Traffic Engineering (TE) MIB |
IETF | RFC4028 | Session Timers in the Session Initiation Protocol (SIP) |
IETF | RFC4044 | Fibre Channel Management MIB |
IETF | RFC4438 | Fibre Channel Name Server MIB |
IETF | RFC4439 | Fibre Channel Fabric Address Manager MIB |
IETF | RFC4625 | Fibre Channel Routing Information MIB |
IETF | RFC4747 | The Virtual Fabrics MIB |
IETF | RFC4875 | Extensions to Resource Reservation Protocol - Traffic Engineering (RSVP-TE) for Point-to-Multipoint TE Label Switched Paths (LSPs) |
IETF | RFC4935 | Fibre Channel Fabric Configuration Server MIB |
IETF | RFC4936 | Fibre Channel Zone Server MIB |
IETF | RFC5250 | The OSPF Opaque LSA Option |
IETF | RFC5311 | Simplified Extension of Link State PDU (LSP) Space for IS-IS |
IETF | RFC5424 | The Syslog Protocol |
IETF | RFC5427 | Textual Conventions for Syslog Management |
IETF | RFC5519 | Internet Group Management Protocol, Version 2 |
IETF | RFC5603 | Ethernet Pseudowire (PW) Management Information Base (MIB) |
IETF | RFC5643 | Management Information Base for OSPFv3 |
IETF | RFC5647 | AES Galois Counter Mode for the Secure Shell Transport Layer Protocol |
IETF | RFC5656 | Elliptic Curve Algorithm Integration in the Secure Shell Transport Layer |
IETF | RFC5675 | Mapping Simple Network Management Protocol (SNMP) Notifications to SYSLOG Messages |
IETF | RFC5676 | Definitions of Managed Objects for Mapping SYSLOG Messages to Simple Network Management Protocol (SNMP) Notifications |
IETF | RFC5717 | Partial Lock Remote Procedure Call (RPC) for NETCONF |
IETF | RFC5880 | Bidirectional Forwarding Detection (BFD) |
IETF | RFC5881 | Bidirectional Forwarding Detection (BFD) for IPv4 and IPv6 (Single Hop) |
IETF | RFC5882 | Generic Application of Bidirectional Forwarding Detection (BFD) |
IETF | RFC5883 | Bidirectional Forwarding Detection (BFD) for Multihop Paths |
IETF | RFC5884 | Bidirectional Forwarding Detection (BFD) for MPLS Label Switched Paths (LSPs) |
IETF | RFC5885 | Bidirectional Forwarding Detection (BFD) for the Pseudowire Virtual Circuit Connectivity Verification (VCCV) |
IETF | RFC6074 | Provisioning, Auto-Discovery, and Signaling in Layer 2 Virtual Private Networks (L2VPNs) |
IETF | RFC6165 | Extensions to IS-IS for Layer-2 Systems |
IETF | RFC6187 | X.509v3 Certificates for Secure Shell Authentication |
IETF | RFC6239 | Suite B Cryptographic Suites for Secure Shell (SSH) |
IETF | RFC6242 | Using the NETCONF Protocol over Secure Shell (SSH) |
IETF | RFC6320 | Protocol for Access Node Control Mechanism in Broadband Networks |
IETF | RFC6325 | Routing Bridges (RBridges): Base Protocol Specification |
IETF | RFC6326 | Transparent Interconnection of Lots of Links (TRILL) Use of IS-IS |
IETF | RFC6327 | Routing Bridges (RBridges): Adjacency |
IETF | RFC6329 | IS-IS Extensions Supporting IEEE 802.1aq Shortest Path Bridging |
IETF | RFC6333 | Dual-Stack Lite Broadband Deployments Following IPv4 Exhaustion |
IETF | RFC6378 | MPLS Transport Profile (MPLS-TP) linear Protection |
IETF | RFC6445 | Multiprotocol Label Switching (MPLS) Traffic Engineering Management Information Base for Fast Reroute |
IETF | RFC6470 | Network Configuration Protocol (NETCONF) Base Notifications |
IETF | RFC6536 | Network Configuration Protocol (NETCONF) Access Control Model |
IETF | RFC6620 | FCFS SAVI: First-Come, First-Served Source Address Validation Improvement for Locally Assigned IPv6 Addresses |
IETF | RFC6850 | Definitions of Managed Objects for Routing Bridges (RBridges) |
IETF | RFC6860 | Hiding Transit-Only Networks in OSPF |
IETF | RFC6939 | Client Link-Layer Address Option in DHCPv6 |
IETF | RFC7011 | Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of Flow Information |
IETF | RFC7209 | Requirements for Ethernet VPN |
IETF | RFC7348 | Virtual eXtensible Local Area Network (VXLAN): A Framework for Overlaying Virtualized Layer 2 Networks over Layer 3 Networks |
IETF | RFC7432 | BGP MPLS-Based Ethernet VPN |
IETF | RFC7490 | Remote Loop-Free Alternate (LFA) Fast Reroute (FRR) |
IETF | RFC7637 | NVGRE: Network Virtualization Using Generic Routing Encapsulation |
IETF | RFC7911 | IEEE 802.1x |
IETF | RFC8102 | Remote-LFA Node Protection and Manageability |
IETF | RFC8214 | Virtual Private Wire Service Support in Ethernet VPN |
IETF | RFC8365 | A Network Virtualization Overlay Solution Using Ethernet VPN (EVPN) |
INCITS-T11 | FC-BB-5 | Fibre Channel Backbone - 5 |
INCITS-T11 | FC-FS-3 | Fibre Channel Framing and Signaling - 3 |
INCITS-T11 | FC-GS-6 | Fibre Channel Generic Services - 6 |
INCITS-T11 | FC-LS-2 | Fibre Channel Link Services -2 |
INCITS-T11 | FC-SW-5 | Fibre Channel Switch Fabric - 5 |
ISO | ISO 8348 | Open Systems Interconnection—Network Service Definition—Documents NSAP (Network Service Access Point) addresses |
ISO | ISO10589 | ISO IS-IS Routing Protocol |
ITU | G.711 | Pulse Code Modulation (PCM) of voice frequencies |
ITU | G.723.1 | Dual Rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s |
ITU | G.726 | 40, 32, 24, 16 kbit/s Adaptive Differential Pulse Code Modulation (ADPCM) |
ITU | G.729 | Coding of speech at 8 kbits using Conjugate-Structure Algebraic-Code-Excited Linear-Prediction (CS-ACELP) |
ITU | G.8032 | Ethernet ring protection switching |
ITU | G.804 | ATM cell mapping into Plesiochronous Digital Hierarchy (PDH), February 1998 |
ITU | Q.400-Q.490 | Specifications of Signalling System R2 |
ITU | Q.922 Annex_A | Core aspects of Q.922 for use with frame relaying bearer service |
ITU | Q.933 Annex_A | Additional procedures for Permanent Virtual Connection (PVC) status management (using Unnumbered Information frames) |
ITU | X.208 | SPECIFICATION OF ABSTRACT SYNTAX NOTATION ONE (ASN.1) |
ITU | X.209 | SPECIFICATION OF BASIC ENCODING RULES FOR ABSTRACT SYNTAX NOTATION ONE (ASN.1) |
ITU | X.509 | Public-key and attribute certificate frameworks |
ITU | Y.1344 | Ethernet ring protection switching |
ITU-T | G.8261/Y.1361 | Timing and synchronization aspects in packet networks |
ITU-T | I.610 | B-ISDN operation and maintenance principles and functions |
ITU-T | Q.921 | ISDN user network interface-Data Link Layer specification |
ITU-T | Q.922 | Core aspects of Q.922 for use with frame relaying bearer service |
ITU-T | Q.931 | ISDN user network interface-Layer 3 specification for basic call control |
ITU-T | Q.933 | Additional procedures for Permanent Virtual Connection (PVC) status management (using Unnumbered Information frames) |
ITU-T | Y.1731 | OAM functions and mechanisms for Ethernet based networks |
OASIS | wsdd-discovery-1.1-spec-os | WS-discovery version 1.1 |
sFlow | sFlow4 | sFlow Version 5 Section 4 |
SMPTE | 2059-2-2015 | SMPTE PTP Profile for time and frequency synchronization in a professional broadcast environment |
TIA | TIA-1057-2006 | Link Layer Discovery Protocol for Media Endpoint Devices |
W3C | CSS level1 | Cascading Style Sheets, level 1 (W3C Recommendation 17 Dec 1996) |
W3C | DOM level1 spec | Document Object Model (DOM) Level 1 Specification Version 1.0 (W3C Recommendation 1 October, 1998) |
W3C | HTML4.0 | HTML 4.01 Specification (W3C Recommendation 24 December 1999) |
W3C | SOAP | Simple Object Access Protocol (SOAP) 1.1, http://www.w3.org/TR/2000/NOTE-SOAP-20000508 |
Item | Description | |
Virtualization | IRF2.0 stack | 9 |
M-LAG device number | 2 | |
ED group | 8 | |
ACL | max number of ingress ACL | 18K/pipe, total 2 pipes |
max number of ingress Car | 2304/pipe, total 2 pipes | |
max number of ingress Counter | 10752/pipe, total 2 pipes | |
max number of egress ACL | 2048 | |
max number of egress Car | 1K | |
max number of egress Counter | 1K | |
Forwarding table | OSPF routing table | 32K min/324K max |
OSPF peer number | 1K | |
BGP routing table | 32K min/324K max | |
BGP peer number | 1K | |
ISIS routing table | 32K min/324K max | |
ISIS peer number | 1K | |
Jumbo frame length(byte) | 9416 | |
Mirroring group | 4 | |
PBR policy | 1000 | |
PBR node | 256 | |
max number of MAC per switch | 288K max | |
max number of ARP entries IPv4 | 272K max | |
max ND table size for IPv6 | 136K max | |
max number of unicast routes IPv4 | 324K max | |
max number of unicast routes IPv6 | 262K max | |
IPv4 l2 multicast group | 4000 | |
IPv4 l3 multicast group | 4000 | |
IPv4 multicast routing | 128K | |
IPv6 l2 multicast group | 4000 | |
IPv6 l3 multicast group | 4000 | |
IPv6 multicast routing | 64K | |
LAGG group | 1024 | |
LAGG member per group | 256 | |
ECMP group | max 4K | |
ECMP member per group | 2-128 | |
VRF | 4095 | |
Interface | Loopback interface number | 1K |
L3 sub interface number | 2500 | |
SVI interface number | 4K | |
VxLAN AC number | 16K | |
VxLAN VSI number | 16K | |
VxLAN tunnel number | 2K | |
VSI interface number | 8K | |
IPv4 tunnel number | 2K | |
IPv6 tunnel number | 2K | |
VLAN number | 4094 | |
Performance | RIB | 1M |
MSTP instance | 64 | |
PVST instance | 510 | |
PVST logical port number | 2000 | |
VRRP VRID | 255 | |
VRRP group | 256 | |
NQA group | 32 | |
Static table | static mac-address | 4000 |
static multicast mac-address | 1K | |
static ARP | 1K | |
static ND | 4K | |
Static table | static IPv4 routing table | 4K |
static IPv6 routing table | 2K |
The typical data center application is an EVPN-VxLAN design,S12500G-AF or S12500X-AF switches work as spine or spine/border, S68XX series work as leaf and border or ED. From this design, the usres can get a non-blocking large L2 system.
PID | Description |
LS-6850-56HF-H3 | H3C S6850-56HF L3 Ethernet Switch with 48 SFP28 Ports and 8 QSFP28 Ports |
LS-6850-2C | H3C S6850-2C L3 Ethernet Switch with 2*QSFP28 Ports and 2*Interface Module Slots |
LS-6850-2C-H1 | H3C S6850-2C L3 Ethernet Switch with 2*QSFP28 Ports and 2*Interface Module Slots |
Power |
|
LSVM1AC650 | 650W AC Power Supply Module |
SW-A-PSR550-12A-B | 550W AC Power Supply Module(Power Panel Side Exhaust Airflow)(Platinum) |
LSVM1DC650 | 650W DC Power Supply Module |
Fan |
|
LSWM1FANSAB | Fan Module (SW, 4056, DC, Air Inlets in Panel) |
FAN-40B-1-D | H3C Fan Module(4056,Air Outlets in Fan Tray Panel) |
LSWM1FANSA | Fan Module (SW, 4056, DC, Air Inlets in Panel) |
Module | |
LSWM18QC | 8-Port QSFP Plus Interface Card |
LSWM124XG2Q | 24-Port SFP Plus and 2-Port QSFP Plus Interface Card with MACSec |
LSWM124XGT2Q | 24-Port 10GBASE-T and 2-Port QSFP Plus Interface Card with MACSec |
LSWM124XG2QL | 24-Port SFP Plus and 2-Port QSFP Plus Interface Card |
LSWM124XG2QFC | 24 Ports SFP Plus and 2 Ports QSFP Plus Interface Card with FC |
LSWM18CQ | H3C 8-Port 100G Ethernet Optical Interface Module(QSFP28) |
LSWM116Q | H3C 16-Port 40G Ethernet Optical Interface Module(QSFP Plus) |
LSWM124TG2H | H3C 24-Port 25G Ethernet Optical Interface (SFP28) and 2-Port 100G Ethernet Optical Interface (QSFP28) Module |
LSWM18CQMSEC | H3C 8-Port 100G MACSEC Ethernet Optical Interface Module(QSFP28) |
Transceiver |
|
SFP-GE-LH80-SM1550 | 1000BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC) |
SFP-FE-LX-SM1310-A | 100BASE-LX SFP Transceiver, Single Mode (1310nm, 15km, LC) |
SFP-FE-SX-MM1310-A | 100BASE-FX SFP Transceiver, Multi-Mode (1310nm, 2km, LC) |
SFP-FE-LH40-SM1310 | 100BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC) |
SFP-GE-LX-SM1310-A | 1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC) |
SFP-GE-LH40-SM1310 | 1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC) |
SFP-GE-LH40-SM1550 | 1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC) |
SFP-GE-SX-MM850-A | 1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC) |
SFP-GE-T | SFP GE Copper Interface Transceiver Module (100m,RJ45) |
QSFP-100G-LR4-WDM1300 | 100G QSFP28 Optical Transceiver Module(1310nm,10km,LR4,WDM,LC) |
QSFP-100G-LR4L-WDM1300 | 100G QSFP28 Optical Transceiver Module (1310nm,2km,LR4L,CWDM4,LC) |
QSFP-100G-PSM4-SM1310 | 100G QSFP28 Optical Transceiver Module (1310nm,500m,PSM4,MPO/APC) |
QSFP-100G-SR4-MM850 | 100G QSFP28 Optical Transceiver Module (850nm,100m OM4,SR4,MPO) |
QSFP-100G-LR4L-WDM1300 | 100G QSFP28 Optical Transceiver Module (1310nm,2km,LR4L,CWDM4,LC) |
QSFP-100G-LR4-WDM1300 | 100G QSFP28 Optical Transceiver Module(1310nm,10km,LR4,WDM,LC) |
QSFP-40G-LR4-WDM1300 | QSFP+ 40GBASE Optical Transceiver Module (1310nm,10km,LR4,LC) |
QSFP-40G-BIDI-SR-MM850 | QSFP+ 40GBASE BIDI Optical Transceiver Module (850nm,100m,SR) |
QSFP-40G-LR4L-WDM1300 | QSFP+ 40GBASE Optical Transceiver Module (1310nm,2km,LR4L,LC) |
QSFP-40G-LR4-PSM1310 | QSFP+ 40GBASE Optical Transceiver Module (1310nm,10km,MPO/APC,LR4,Parallel Single Mode) |
QSFP-40G-SR4-MM850 | QSFP+ 40GBASE Optical Transceiver Module (850nm,100m,SR4,Support 40G to 4*10G) |
QSFP-40G-CSR4-MM850 | QSFP+ 40GBASE Optical Transceiver Module (850nm,300m,CSR4,Support 40G to 4*10G) |
SFP-25G-SR-MM850 | 25G SFP28 Optical Transceiver Module (850nm,100m,SR,MM,LC) |
Cable |
|
QSFP-100G-D-AOC-10M | 100G QSFP28 to 100G QSFP28 10m Active Optical Cable |
QSFP-100G-D-CAB-1M | 100G QSFP28 to 100G QSFP28 1m Passive Cable |
QSFP-100G-D-AOC-20M | 100G QSFP28 to 100G QSFP28 20m Active Optical Cable |
QSFP-100G-D-CAB-3M | 100G QSFP28 to 100G QSFP28 3m Passive Cable |
QSFP-100G-D-CAB-5M | 100G QSFP28 to 100G QSFP28 5m Passive Cable |
QSFP-100G-D-AOC-7M | 100G QSFP28 to 100G QSFP28 7m Active Optical Cable |
QSFP-100G-4SFP-25G-CAB-1M | 100G QSFP28 to 4x25G SFP28 1m Passive Cable |
QSFP-100G-4SFP-25G-CAB-3M | 100G QSFP28 to 4x25G SFP28 3m Passive Cable |
QSFP-100G-4SFP-25G-CAB-5M | 100G QSFP28 to 4x25G SFP28 5m Passive Cable |
LSWM1QSTK0 | 40G QSFP+ Cable 1m |
LSWM1QSTK1 | 40G QSFP+ Cable 3m |
LSWM1QSTK2 | 40G QSFP+ Cable 5m |
QSFP-40G-D-AOC-10M | 40G QSFP+ to 40G QSFP+ 10m Active Optical Cable |
QSFP-40G-D-AOC-20M | 40G QSFP+ to 40G QSFP+ 20m Active Optical Cable |
QSFP-40G-D-AOC-7M | 40G QSFP+ to 40G QSFP+ 7m Active Optical Cable |
LSWM1QSTK3 | 40G QSFP+ to 4x10G SFP+ Cable 1m |
LSWM1QSTK4 | 40G QSFP+ to 4x10G SFP+ Cable 3m |
LSWM1QSTK5 | 40G QSFP+ to 4x10G SFP+ Cable 5m |
SFP-25G-D-CAB-1M | 25G SFP28 to 25G SFP28 1m Passive Cable |
SFP-25G-D-CAB-3M | 25G SFP28 to 25G SFP28 3m Passive Cable |
SFP-25G-D-CAB-5M | 25G SFP28 to 25G SFP28 5m Passive Cable |
SFP-25G-D-AOC-3M | 25G SFP28 to 25G SFP28 3m Active Optical Cable |
SFP-25G-D-AOC-5M | 25G SFP28 to 25G SFP28 5m Active Optical Cable |
SFP-25G-D-AOC-7M | 25G SFP28 to 25G SFP28 7m Active Optical Cable |
SFP-25G-D-AOC-10M | 25G SFP28 to 25G SFP28 10m Active Optical Cable |
SFP-25G-D-AOC-20M | 25G SFP28 to 25G SFP28 20m Active Optical Cable |