Country / Region
The MSR810 series can be deployed as an egress router for small- to medium-sized enterprise networks to operate with VPN, NAT, and IPSec service gateways. Together with other H3C products, the MSR810 can provide comprehensive network solutions for government, power, financial, tax, public security, railway, and education customers.
The MSR810 series has the following models: MSR810-LM-EA, MSR810-EI.
The following contents are complex, and it is recommended to browse on PC.
Enter c.h3c.com.cn on the PC browser and operate according to the page to synchronize to the PC and continue browsing.
Continue by mobile
Uses H3C's leading Comware network operating system to provide intelligent service scheduling management mechanism and supports loose coupling of different service modules as well as the dynamic loading of processes and patches.
Service security
Network security
End device access security
Equipment management security
Uses granular identification and control to rate limit and filter application layer services and ensure bandwidth and provides detailed network statistics for network optimization.
Performs load balancing based on bandwidth, user, user group, service, or application by using asymmetric link, traffic load balancing, and multi-topology dynamic routing technologies.
Supports flexible bandwidth sharing based on service, user, user group, link, and user bandwidth.
Comprehensive network management methods—Supports command line and SNMP.
Zero-configuration setup—Enables zero configuration setup, USB-based and URL-based automatic configuration.
Comware embedded EAA function—Monitors the internal events and status of the system's software and hardware components. If a fault occurs, it collects diagnostic information and attempts to make automatic repairs as well as sending the diagnostic information to a specific email address.
Independent hardware processing module for monitoring and programmable components that supports online upgrade and auto loading to strengthen product reliability.
Millisecond link fault detection technology Bidirectional Forwarding Detection (BFD) and Track between BFD and static routing, RIP/OSPF/BGP/ISIS dynamic routing, VRRP, or interface backup.
Network quality analyzer (NQA) and Track between NQA and static routing, VRRP, or interface backup.
Multi-device redundancy and load balancing (VRRP/VRRPE).
Item | MSR810-LM-EA | MSR810-EI |
IP Forwarding Performance (IMIX) | 400 Mbps | 400 Mbps |
Forwarding Performance with ACL+NAT+QOS (IMIX) | 200 Mbps | 200 Mbps |
IPSec Forwarding Performance (1400byte) | 70 Mbps | 70 Mbps |
AD-WAN Typical Encryption Performance (IMIX) | 40 Mbps | 40 Mbps |
CPU | 800MHz | 800MHz |
Memory | 1 GB | 1 GB |
Flash(default/maximum) | 256 MB | 256 MB |
External Flash | N/A | N/A |
USB ports | 1 | 1 |
Console ports | 1 | 1 |
WAN ports | 1 × GE copper port 1 × SFP port | 1 × GE copper port 1 × SFP port |
LAN port | 4 × GE ports (can be configured as WAN interfaces) | 4 × GE ports (can be configured as WAN interfaces) |
WLAN | N/A | N/A |
WLAN antenna | N/A | N/A |
· Band 38: 2570 to 2620 M · Band 40: 2300 to 2400 M · Band 41: 2496 to 2690 M FDD-LTE: · Band 1: UL: 1920 to 1980 M, DL: 2110 to 2170 M · Band 3: UL: 1710 to 1785 M, DL: 1805 to 1880 M · Band 5: UL: 824 to 849 M, DL: 869 to 894 M · Band 7: UL: 2500 to 2570 M, DL: 2620 to 2690 M · Band 8: UL: 880 to 915 M, DL: 925 to 960 M · Band 20: UL:832~862M, DL:791~821MHz · Band 28: UL: 703 to 748 M, DL: 758 to 803 M · Band 1: UL: 1920 to 1980 M, DL: 2110 to 2170 M · Band 5: UL: 824 to 849 M, DL: 869 to 894 M · Band 8: UL: 880 to 915 M, DL: 925 to 960 M · Band 3: UL: 1710 to 1785 M, DL: 1805 to 1880 M · Band 5: UL: 824 to 849 M, DL: 869 to 894 M · Band 8: UL: 880 to 915 M, DL: 925 to 960 M | N/A | |
3G/4G antenna | Stick-like/Magnetic antenna | N/A |
SIM card slot | 2 (dual-card one-standby) | N/A |
Max power consumption | 12W | 24W |
Power voltage(adapter) | External power adapter: 100 VAC to 240 VAC @ 50 Hz/60 Hz | External power adapter: 100 VAC to 240 VAC @ 50 Hz/60 Hz |
Power voltage(device) | DC 12V 2A | DC 12V 2A |
Dimensions (H × W × D) | 44 x 210 x 140 mm | 44 × 210 × 130 mm |
Operating Temperature | 0°C to 45°C | 0°C to 45°C |
Operating Altitude | < 5000m | < 5000m |
Operating Humidity | 5 to 95%, non-condensing | 5 to 95%, non-condensing |
FCC Part 15 Subpart B CLASS B ICES-003 CLASS B VCCI CLASS B CISPR 32 CLASS B EN 55032 CLASS B AS/NZS CISPR32 CLASS B CISPR 35 EN 55035 EN 61000-3-2 EN 61000-3-3 ETSI EN 301 489-1 ETSI EN 301 489-52 GB/T 9254.1 | FCC Part 15 Subpart B CLASS B ICES-003 CLASS B VCCI CLASS B CISPR 32 CLASS B EN 55032 CLASS B AS/NZS CISPR32 CLASS B CISPR 35 EN 55035 EN 61000-3-2 EN 61000-3-3 ETSI EN 300 386 GB/T 9254.1 | |
Safety Standards Compliance | FDA 21 CFRSubchapter J GB 4943.1 UL 62368-1 CAN/CSA C22.2 No 62368-1 IEC 62368-1 EN 62368-1 | FDA 21 CFRSubchapter J GB 4943.1 UL 62368-1 CAN/CSA C22.2 No 62368-1 IEC 62368-1 EN 62368-1 |
Radio & Health Standards Compliance | ETSI EN 301 908-1 ETSI EN 301 908-2 ETSI EN 301 908-13 EN 301 511 EN 50665 EN IEC 62311 | N/A |
Environment Standards Compliance | IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-78 IEC 60068-2-30 IEC 60068-2-14 | IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-78 IEC 60068-2-30 IEC 60068-2-14 |
Shock and vibration Standards Compliance | IEC 60068-2-64 IEC 60068-2-31 | IEC 60068-2-64 IEC 60068-2-31 |
Item | Specification |
Layer 2 switching | Ethernet, Ethernet II, VLAN (port-based VLAN, guest VLAN), 802.3x, 802.1p, 802.1Q, 802.1X, STP (802.1D), RSTP (802.1w), MSTP (802.1s), PPP, PPPoE client, PPPoE server, and DDR |
IP services | Unicast/multicast, TCP, UDP, IP option, IP unnumbered, policy-based routing, NetStream, and sFlow |
IP application | Ping, Tracert, ICMP, DHCP server, DHCP relay, DHCP client, DNS client, DNS proxy, DDNS, NTP, and SNTP |
IPv4 routing | Static routing Dynamic routing: RIPv1/v2, OSPFv2, BGP, IS-IS Route iteration Policy routing Equal-cost multi-path routing (ECMP) Multicast routing: IGMPv1/v2/v3, PIM-DM, PIM-SM, MBGP, MSDP |
IPv6 | IPv6 ND, IPv6 PMTU, IPv6 FIB, IPv6 ACL, NAT-PT, 6PE, and DS-LITE IPv6 tunneling: Manual tunneling, automatic tunneling, GRE tunnel, 6to4, ISATAP Static routing Dynamic routing: RIPng, OSPFv3, IS-ISv6, BGP4+ IPv6 multicast: MLDv1/v2, PIM-DM, PIM-SM |
QoS | LR, port-based mirroring, Port Trust Mode, and port priority Committed access rate (CAR) FIFO, WFQ, CBQ Generic Traffic Shaping (GTS) Traffic classification |
Security | PPPoE client & server, portal, 802.1X Local authentication, RBAC, RADIUS, TACACS+ Basic Firewall Function, ASPF, ACL, filter, connection limit IKE, IPsec L2TP, NAT/NAPT, PKI, RSA, SSH v1.5/2.0, URPF, mGRE, GRE ARP attack prevention SSL VPN, ADVPN, GDVPN AES, DES, 3DES,MD5, SHA1 |
MPLS | LDP, Static LSP L3VPN: Inter-AS MPS VPN (Option 1/2/3), MPLS nested VPN, hierarchy of PE (HoPE), dual-homed CE, MCE, and multirole host L2VPN: Martini, Kompella, CCC PWs and static PWs MPLS TE, RSVP TE |
High availability | VRRP, VRRPv3 Bandwidth-based load balancing and backup IP address-based load balancing and backup NQA collaboration with routing, VRRP or interface backup |
Management and maintenance | SNMP v1/v2c/v3, MIB, SYSLOG, RMON BiMS remote management, booting from USB drive CLI, file system, and dual image DHCP, FTP, HTTP, ICMP, UDP public, UDP private, TCP public, TCP private, and SNMP Console port login, Telnet (VTY) login, SSH login, and FTP login |
For commercial chain enterprises, MSR810 routers are ideal wireless coverage products for their branches and outlets. One MSR810 router itself is capable of providing network security, wireless connection, routing, and switching services for an outlet, simplifying network deployment and management. The IMC and service platforms deployed at the center perform centralized management for the branches and outlets, improving the network deployment and management efficiency.
One MSR810 itself deployed at the outlet can provide network security, wireless connection, routing, and switching services.
The MSR810 can store PHP dynamic webpages, pictures, flashes, videos, etc. and push the advertising and multimedia contents to the clients as long as they come online, which avoids occupying the network bandwidth.
The router supports online activity management and audit and performs granular traffic control.
Chain enterprises wireless marketing solution
The built-in 3G/4G interfaces on the MSR810 support TDD/FDD 4G LTE networks of all service providers, and provide a transmission rate up to 100 Mbps and are backward compatible with 3G. The router can provide a backup link for key services and to backhaul monitoring videos. It can also be used in hard-to-wire and mobile office scenarios.
Supports TDD/FDD 4G LTE networks deployed by all service providers, with a transmission rate up to 100 Mbps, backward compatible with 3G.
Supports zero configuration startup, maintenance, and management and IMC centralized management to greatly improve the network deployment and management efficiency.
Supports IPsec, GPS positioning, and IMSI binding to ensure traffic transmission and mobile access security
4G backup link and monitoring video backhaul networking solution
Product ID | Description |
RT-MSR810-LM-EA | H3C MSR810-LM-EA Enterprise 6-Port Gigabit Ethernet 4G LTE Router (2GE WAN(1GE+1SFP), 4GE LAN/WAN, TDD/FDD LTE), EMEA & APAC Edition |
RT-MSR810-EI | H3C MSR810-EI Enterprise 6-Port Gigabit Ethernet Router (2GE WAN(1GE+1SFP), 4GE LAN/WAN) |