Description

This software is used to upgrade the BIOS version of the R3950 G7 server

Installation steps

Publish Description

Restrictions and cautions

Restrictions

This release is applicable only to H3C UniServer R4950 & R3950 & R3350 G7 (Turin CPU).

Cautions

During the BIOS startup process, there will be interaction with HDM. If HDM is upgraded or reset during this period, it may cause abnormal BIOS startup.

Version information

Version number

Target file name and MD5 checksum

M50-BIOS-7.30.10-signed.bin:932ab169a41cca4c86d94ad7041ca6f6

You can access the HDM Web interface of the server to identify the BIOS firmware version on the Dashboard page, as shown in Figure 1.

Note: The picture is for reference only, please refer to the actual interface for specific details.

Figure 1 Viewing the BIOS version number from HDM

BIOS built-in software version

Table 1 BIOS built-in software version

Supported languages

English

Chinese

Supported Devices

H3C UniServer R4950 G7(Turin)

H3C UniServer R3950 G7(Turin)

H3C UniServer R3350 G7(Turin)

Hardware and software compatibility matrixes

Table 2 Hardware and software compatibility matrix for the R4950 & R3950 & R3350 G7 Turin

Update restrictions and guidelines

This version is recommended.

Make sure the software versions are compatible with each other.

To update both HDM3 and the BIOS, update HDM3 first.

Make sure the server is running in stable state before the update. That is, the server is powered off or has entered the operating system.

If the server enters the OS before the update, you must power cycle the server for the new firmware to take effect.

If you select the Retain or Restore method to update the BIOS, the update occurs during POST after the server is powered on again. During the update, do not disconnect the power source from the server, or forcedly power off or restart the server.

If you select the Forcedly restore method to update the BIOS, do not disconnect the power source from the server, or power off or restart the server.

Selecting the Restore or Forcedly restore method will restore the default BIOS settings, including restoring the boot mode in the BIOS to the default (UEFI).

As a best practice of bulk update, make sure you can update one server successfully before you update the remaining servers.

Problems Solved

Resolved problems in BIOS-7.30.10

202502191454

Symptom: No PPR repair log reported after importing CE error with Boot Time sPPR option enabled.

Condition: Boot Time sPPR option enabled with imported CE error.

202503171069

Symptom: No PPR repair log reported after importing CE error with Runtime sPPR option enabled.

Condition: Runtime sPPR option enabled with imported CE error.

202504010634

Symptom: The default PK for SecureBoot needs to be generated by H3C BIOS, removing the IBV-provided test PK.

Condition: Update requirement for the corresponding PK of SecureBoot.

202504270375

Symptom: When the Workload Profile option is non-custom, some options requiring linkage are not set to Auto as per documentation.

Condition: Workload Profile option is non-custom.

202503251313

Symptom: AMD Turin platform supports disabling PCIe slot device features in BIOS integrated into the mainline.

Condition: Planning for the requirement to disable PCIe slot devices in BIOS.

New Functions

Version:7.30.10(2025/6/4)

Upgrade recommendations

Recommended Upgrade

Problems Solved

Resolved problems in BIOS-7.30.10

202502191454

Symptom: No PPR repair log reported after importing CE error with Boot Time sPPR option enabled.

Condition: Boot Time sPPR option enabled with imported CE error.

202503171069

Symptom: No PPR repair log reported after importing CE error with Runtime sPPR option enabled.

Condition: Runtime sPPR option enabled with imported CE error.

202504010634

Symptom: The default PK for SecureBoot needs to be generated by H3C BIOS, removing the IBV-provided test PK.

Condition: Update requirement for the corresponding PK of SecureBoot.

202504270375

Symptom: When the Workload Profile option is non-custom, some options requiring linkage are not set to Auto as per documentation.

Condition: Workload Profile option is non-custom.

202503251313

Symptom: AMD Turin platform supports disabling PCIe slot device features in BIOS integrated into the mainline.

Condition: Planning for the requirement to disable PCIe slot devices in BIOS.

New Functions

Version:6.30.39(2025/6/4)

Upgrade recommendations

Recommended Upgrade

Problems Solved

Resolved problems in BIOS-6.30.39

202504011137

Symptom: The default PK for SecureBoot in the BIOS package needs to use the PK generated by H3C BIOS, removing the test PK provided by IBV.

Condition: Update requirement for the PK corresponding to the SecureBoot function.

202505070709

Symptom: The R4950G7 motherboard + Genoa CPU nvme M.2 drive does not display detailed information under HDM.

Condition: R4950G7 motherboard + Genoa CPU with nvme M.2 drive installed.

202505121843

Symptom: The customized options "Enable Requested CPU min frequency" and "Requested CPU min frequency" are set to non-default values; importing this customized package fails to modify the options.

Condition: Customization of the options "Enable Requested CPU min frequency" and "Requested CPU min frequency" in the customized package.

202504162006

Symptom: Pressing the physical power button shortly after powering on leads to the BMC not fully starting, causing the BIOS to be unable to obtain a valid OEM flag and enter the load default process; BIOS values do not match customized values.

Condition: Pressing the physical power button shortly after powering on without the BMC fully starting before BIOS boot.

202505070131

Symptom: [ITST][BIOS GNA][Production Requirement] MBIST reports socket number not starting from 1.

Condition: Enabling MBIST function and viewing the location information of the faulty memory reported by MBIST.

202505191929

Symptom: False positive issue with driver fault during hot swapping of nvme drives; optimization of VPP I2C hot swapping address is needed.

Condition: Fully populated nvme drives with repeated hot swapping tests.

New Functions