Restrictions and cautions
Restrictions
Verify that the server on which you want to upgrade iFIST can communicate with HDM.
Cautions
Verify the hardware and software compatibility for iFIST.
iFIST diagnosis is unavailable only for the R4970 G7.
In the current software version, iFIST supports hot backup only for RAID-P460-B2, RAID-P460-M2, RAID-P460-B4, and RAID-P460-M4 controllers.
The OS installation wizard of iFIST supports the following operating systems:
Kylin:
Kylin-Server-V10-SP3-x86_64(2403)
Kylin:
Kylin-Server-V10-SP2-x86_64
Kylin-Server-V10-SP3-x86_64(2303)
Kylin-Server-V10-SP3-x86_64(2403)
CentOS:
CentOS 8.3(64 bit)
CentOS 8.4(64 bit)
Oracle Linux:
Oracle Linux 8.2
Oracle Linux 8.6
Oracle Linux 8.10
Oracle Linux 9.0
Oracle Linux 9.5
openEuler:
openEuler-20.03-LTS-x86_64
openEuler-20.03-LTS-SP1-x86_64
openEuler-20.03-LTS-SP3-x86_64
openEuler-22.03-LTS-SP1-x86_64
openEuler-22.03-LTS-x86_64
Rocky Linux:
Rocky Linux 8.6 x86_64
Rocky Linux 8.9 x86_64
Rocky Linux 8.10 x86_64
Rocky Linux 9.0 x86_64
Rocky Linux 9.2 x86_64
Rocky Linux 9.3 x86_64
Rocky Linux 9.5 x86_64
Ubuntu Server:
Ubuntu Server 22.04 (64 bit) – LTS
Ubuntu Server 22.04.1 (64 bit) – LTS
Ubuntu Server 22.04.3 (64 bit) – LTS
Ubuntu Server 22.04.4 (64 bit) – LTS
Red Hat Enterprise Linux:
Red Hat Enterprise Linux 8.3 (64 bit) (includes KVM)
Red Hat Enterprise Linux 8.4 (64 bit) (includes KVM)
Red Hat Enterprise Linux 8.5 (64 bit) (includes KVM)
Red Hat Enterprise Linux 8.6 (64 bit) (includes KVM)
Red Hat Enterprise Linux 9.0 (64 bit) (includes KVM)
Red Hat Enterprise Linux 9.2 (64 bit) (includes KVM)
Red Hat Enterprise Linux 9.5 (64 bit) (includes KVM)
The OS installation wizard of iFIST supports the following storage controllers:
HBA-1000-M2-1
RAID-P430-M1
RAID-P430-M2
HBA-H460-M1
RAID-P460-M4
HBA-H460-B1
RAID-P460-B4
HBA-LSI-9311-8i-A1-X
RAID-LSI-9361-8i(1G)-A1-X
RAID-LSI-9361-8i(2G)-1-X
RAID-LSI-9460-8i(2G)
RAID-LSI-9460-8i(4G)
RAID-LSI-9460-16i(4G)
RAID-L460-M4
RAID-P5408-Mf-8i-4GB
HBA-H5408-Mf-8i
HBA-LSI-9440-8i
HBA-LSI-9300-8i-A1-X
RAID-P4408-Mf-8i-2GB
RAID-P2404-Mf-4i-2GB
RAID-P5408-Ma-8i-4GB
RAID-P4408-Ma-8i-2GB
RAID-P4408-Mr-8i-2GB
RAID-P460-B2
RAID-P460-M2
RAID-LSI-9560-LP-16i-8GB
RAID-LSI-9560-LP-8i-4GB
RAID-P9560-3S-8i-4GB
HBA-LSI-9400-8i
HBA-LSI-9400-16i
HBA-LSI-9500-LP-8i
HBA-LSI-9500-LP-16e
HBA-LSI-9500-LP-16i
HBA-LSI-9540-LP-8i
RAID-MARVELL-SANTACRUZ-LP-2i
Table 4 shows the compatibility between firmware versions of storage controllers and iFIST.
Table 4 Compatibility between iFIST and storage controllers
Storage controller | Compatible firmware versions | Remarks |
HBA-H460-M1 | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
HBA-H460-B1 | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
RAID-P460-M2 | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
RAID-P460-B2 | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
RAID-P460-M4 | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
RAID-P460-B4 | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
HBA-1000-M2-1 | 3.52 | The current iFIST version can also identify storage controllers with firmware version higher than 3.52. |
RAID-P430-M1 | 3.52 | The current iFIST version can also identify storage controllers with firmware version higher than 3.52. |
RAID-P430-M2 | 3.52 | The current iFIST version can also identify storage controllers with firmware version higher than 3.52. |
RAID-P4408-Mf-8i-2GB | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
RAID-P2404-Mf-4i-2GB | 1.60.0, 1.98.0, 2.30.0, 2.93.0 | The current iFIST version might be abnormal for storage controllers with firmware version higher than 1.60.0, 1.98.0, 2.30.0, and 2.93.0. |
RAID-LSI-9361-8i(1G)-A1-X | 24.18.0-0021 | The current iFIST version can also identify storage controllers with firmware version higher than 24.18.0-0021. |
RAID-LSI-9361-8i(2G)-1-X | 24.18.0-0021 | The current iFIST version can also identify storage controllers with firmware version higher than 24.18.0-0021. |
RAID-LSI-9460-8i(2G) | 5.010.00-0671 | The current iFIST version can also identify storage controllers with firmware version higher than 5.010.00-0671. |
RAID-LSI-9460-8i(4G) | 5.010.00-0671 | The current iFIST version can also identify storage controllers with firmware version higher than 5.010.00-0671. |
RAID-LSI-9460-16i(4G) | 5.010.00-0671 | The current iFIST version can also identify storage controllers with firmware version higher than 5.010.00-0671. |
HBA-LSI-9440-8i | 5.040.01-1123 | The current iFIST version can also identify storage controllers with firmware version higher than 5.040.01-1123. |
RAID-L460-M4 | 5.040.01-1123 | The current iFIST version can also identify storage controllers with firmware version higher than 5.040.01-1123. |
RAID-P5408-Mf-8i | 50.07.0-1868 | The current iFIST version can also identify storage controllers with firmware version higher than 50.07.0-1868. |
RAID-P5408-Ma-8i | 50.07.0-1868 | The current iFIST version can also identify storage controllers with firmware version higher than 50.07.0-1868. |
HBA-H5408-Mf-8i | 50.07.0-1868 | The current iFIST version can also identify storage controllers with firmware version higher than 50.07.0-1868. |
HBA-LSI-9311-8i-A1-X | 15.00.07.00 | The current iFIST version can also identify storage controllers with firmware version 15.00.07.00. |
HBA-LSI-9300-8i | 15.00.07.00 | The current iFIST version can also identify storage controllers with firmware version 15.00.07.00 |
RAID-LSI-9560-8i(4G) | 52.17.0-4031 | The current iFIST version can also identify storage controllers with firmware version 52.17.0-4031. |
RAID-LSI-9560-16i(8G) | 52.17.0-4031 | The current iFIST version can also identify storage controllers with firmware version higher than 50.07.0-1868. |
HBA-LSI-9400-8i | 17.00.00.00 | The current iFIST version can also identify storage controllers with firmware version 17.00.00.00 |
HBA-LSI-9400-16i | 17.00.00.00 | The current iFIST version can also identify storage controllers with firmware version 17.00.00.00 |
For the memory smart-test feature, follow these restrictions and guidelines:
The memory smart-test feature can perform tests only in UEFI boot mode.
The memory smart-test feature is supported only when all memory chips on the server are from a single vendor, Hynix, Samsung, or Micron.
The memory smart-test feature for memory chips from Hynix is supported in BIOS-2.00.33 and later on the following servers:
H3C UniServer R2700 G3
H3C UniServer R2900 G3
H3C UniServer R4700 G3
H3C UniServer R4900 G3
H3C UniServer R6700 G3
H3C UniServer R6900 G3
H3C UniServer R5300 G3
H3C UniServer R4400 G3
H3C UniServer E3200 G3
H3C UniServer B5700 G3
H3C UniServer B5800 G3
H3C UniServer B7800 G3
The memory smart-test feature for memory chips from Samsung is supported in BIOS-2.00.36 and later on the following servers:
H3C UniServer R2700 G3
H3C UniServer R2900 G3
H3C UniServer R4700 G3
H3C UniServer R4900 G3
H3C UniServer R6700 G3
H3C UniServer R6900 G3
H3C UniServer R5300 G3
H3C UniServer R4400 G3
H3C UniServer E3200 G3
H3C UniServer B5700 G3
H3C UniServer B5800 G3
H3C UniServer B7800 G3
The memory smart-test feature for memory chips from Samsung is supported in BIOS-2.00.37 and later on the H3C UniServer R8900 G3 servers.
The memory smart-test feature for memory chips from Micron is supported in BIOS-2.00.43 and later on the following servers:
H3C UniServer R2700 G3
H3C UniServer R2900 G3
H3C UniServer R4700 G3
H3C UniServer R4900 G3
H3C UniServer R6700 G3
H3C UniServer R6900 G3
H3C UniServer R8900 G3
H3C UniServer R5300 G3
H3C UniServer R4400 G3
H3C UniServer E3200 G3
H3C UniServer B5700 G3
H3C UniServer B5800 G3
H3C UniServer B7800 G3
Follow these restrictions and guidelines for configuration management:
Configuration import and export are supported only in HDM-1.11.25 and later.
PMC storage controllers do not support importing and exporting RAID configuration.
ACS configuration is supported only on the following products:
H3C UniServer R5300 G3 with 16 GPUs
H3C UniServer R5300 G3 with 8 GPUs
H3C UniServer R5500 G5 with AMD CPUs
H3C UniServer R5500 G5 with Intel CPUs
H3C UniServer R5300 G5 with 16 GPUs
H3C UniServer R5300 G5 with 8 GPUs
H3C UniServer R5300 G3 with a version earlier than BIOS-2.00.47 does not support disabling ACS control.
H3C UniServer R5500 G5 with Intel CPUs and a version earlier than BIOS-5.34 does not support disabling ACS control.
H3C UniServer R5300 G3 with 16 GPUs and a version earlier than HDM-1.30.20 does not support enabling ACS capability.
H3C UniServer R5300 G5 with 16 GPU and a version earlier than HDM-2.60 does not support enabling ACS capability.
Follow these restrictions and guidelines for log downloading:
SDS log downloading is supported only in HDM-1.11.19 and later.
The HBA-LSI-9300-8i-A1-X storage controller does not support downloading controller logs.
Secure data clearing is supported only on the following storage controllers: HBA-H460-M1, HBA-H460-B1, RAID-P460-M2, RAID-P460-B2, RAID-P460-M4, RAID-P460-B4, RAID-P4408-Mf-8i, RAID-P2404-Mf-4i, RAID-LSI-9361-8i(1G)-A1-X, and RAID-LSI-9361-8i(2G)-1-X.
Version information
Version number
Version 1.79
Table 1 shows the MD5 checksums for the installation files in this package.
Table 1 MD5 checksums for individual software installation files
Software | Installation file name | MD5 checksum |
ISO installation package | iFIST-1.79- x86_64.iso | 5116e0bb32cef5a0f5f1f6f2431f3d47 |
Standalone installation package | iFIST-1.79- x86_64.tar.gz | 1db53856d7910333039dc0131a2b4678 |
| NOTE: You can access the iFIST Web interface to identify the iFIST version by clicking the icon in the top right corner of the iFIST Web interface. |
The version history is as shown in Table 2.
Table 2 Version history
Version number | Last version | Release date | Release type | Remarks |
1.79 | 1.78 | 2025-05-30 | ESS version | (Recommend update.) Fixed bugs. |
1.78 | 1.77P01 | 2025-04-30 | ESS version | (Recommend update.) Fixed bugs. |
1.77P01 | 1.76 | 2025-03-31 | ESS version | (Recommend update.) Fixed bugs. |
1.76 | 1.76 | 2025-02-28 | ESS version | (Recommend update.) Fixed bugs. |
1.75 | 1.74 | 2025-01-24 | ESS version | (Recommend update.) Fixed bugs. |
1.74 | 1.73 | 2025-01-02 | ESS version | (Recommend update.) Fixed bugs. |
1.73 | 1.71 | 2024-11-29 | ESS version | (Recommend update.) Fixed bugs. |
1.71 | 1.69 | 2024-09-30 | ESS version | (Optional update.) Fixed bugs. |
1.69 | 1.67P01 | 2024-07-30 | ESS version | (Optional update.) Fixed bugs. |
1.67P01 | NA | 2024-06-17 | First release | First release |
Software running environments
Rocky-9.3-x86_64
Supported browsers
Mozilla Firefox 102.15.0
Supported languages
English
Chinese
Supported devices
H3C UniServer R4930 G7
H3C UniServer R5330 G7
H3C UniServer R5500 G7
H3C UniServer R4900 G7
H3C UniServer R4700 G7
H3C UniServer R3950 G7
H3C UniServer R4950 G7
H3C UniServer R4330 G7
H3C UniServer R3900 G7
H3C UniServer R4900 G7 Ultra
H3C UniServer R4300 G7
Hardware and software compatibility matrix
| CAUTION: To avoid an upgrade failure, use the following tables to verify the hardware and software compatibility before performing an upgrade. |
Table 3 Hardware and software compatibility matrix (for the H3C UniServer R4930/R5330/R5500/R4900/R4700/R3950/R4950/R4330/R3900/R4900 Ultra/R4300 G7 servers)
Item | Specifications |
Product family | H3C UniServer R4930/R5330/R5500/R4900/R4700/R3950/R4950/R4330/R3900/R4900 Ultra/R4300 G7 servers |
UniSystem | Version 2.79 and later |
FIST SMS | Version 1.79 and later |
iFIST | Version 1.79 and later |
Upgrade recommendations
As a best practice, recommend upgrade the software to this version.
Upgrade restrictions and guidelines
Verify the hardware and software compatibility before performing an upgrade.
Verify that the server on which the iFIST image is saved can communicate with HDM.