Description

The software is used to upgrade auxiliary control logic CPLD of the R4900 G6 server

Installation steps

Restrictions and guidelines

None.

Publish Description

Supported products

H3C UniServer R4900 G6

Restrictions and guidelines

None.

Version information

Version number

CPLD version: V006

Figure 1 Viewing CPLD version

Table 2 Version history

Supported languages

English.

Chinese.

Supported hardware platforms

H3C UniServer R4900 G6

Hardware and software compatibility matrix

Table 3 Hardware and software compatibility matrix

(Optional) Version compatibility with ISSU

None.

Update recommendation

Update to this version is recommended.

Update restrictions and guidelines

Make sure the server and the HDM client (such as a PC) can reach each other.

For a successful bulk update, make sure you can update one server successfully before you update the remaining servers.

During the update, make sure the network connection is available and do not refresh the webpage.

Do not refresh the page during the update.

To avoid CPLD or operating system errors, do not power on or power off the server during the firmware update.

After the firmware is updated, clear the browser cache before you re-log in to HDM.

Problems Solved

202502240298

Symptom: When a network port of a standard network adapter is specified as the shared network port, packet loss might occur.

Condition: This symptom might occur if a standard network adapter is specified as the shared network port

202305071600

Symptom: When the RS46R3X16 riser card is installed, PCIe slots 1 and 3 on the riser card cannot identify PCIe modules.

Condition: This symptom might occur if a PCIe module is installed in PCIe slot 1 or 3 on the RS46R3X16 riser card.

202306250162

Symptom: If PMIC DIMMs of the TI manufacturer are used, BIOS initialization gets stuck.

Condition: This symptom might occur if the CPLD version is V003 and PMIC DIMMs of the TI manufacturer are used together with PMIC DIMMs of other manufacturers.

202306250486

Symptom: The health LED on the chassis ear flashes red when no HDM alarm is present.

Condition: This symptom might occur if a power supply with specific errors are installed.

202304010586

Symptom: HDM displays N/A for hot swapped OCP network adapters of specific models.

Condition: This symptom might occur if you hot swap OCP network adapters of specific models.

New Functions

Version:V006(2025/4/1)

Upgrade recommendations

Recommended Upgrade

Problems Solved

202502240298

Symptom: When a network port of a standard network adapter is specified as the shared network port, packet loss might occur.

Condition: This symptom might occur if a standard network adapter is specified as the shared network port

202305071600

Symptom: When the RS46R3X16 riser card is installed, PCIe slots 1 and 3 on the riser card cannot identify PCIe modules.

Condition: This symptom might occur if a PCIe module is installed in PCIe slot 1 or 3 on the RS46R3X16 riser card.

202306250162

Symptom: If PMIC DIMMs of the TI manufacturer are used, BIOS initialization gets stuck.

Condition: This symptom might occur if the CPLD version is V003 and PMIC DIMMs of the TI manufacturer are used together with PMIC DIMMs of other manufacturers.

202306250486

Symptom: The health LED on the chassis ear flashes red when no HDM alarm is present.

Condition: This symptom might occur if a power supply with specific errors are installed.

202304010586

Symptom: HDM displays N/A for hot swapped OCP network adapters of specific models.

Condition: This symptom might occur if you hot swap OCP network adapters of specific models.

New Functions

Version:V005(2024/8/9)

Upgrade recommendations

Recommended Upgrade

Problems Solved

New Functions