Contents

Lighttpd Web service commands· 1

light-http server directory· 2

light-http server enable· 3

light-http server http-port 3

light-http server https-port 4

 

Lighttpd Web service commands

The following compatibility matrixes show the support of hardware platforms for Lighttpd Web service:

 

Hardware	Lighttpd Web service compatibility
MSR810, MSR810-W, MSR810-W-DB, MSR810-LM, MSR810-W-LM, MSR810-10-PoE, MSR810-LM-HK, MSR810-W-LM-HK, MSR810-LM-CNDE-SJK, MSR810-CNDE-SJK	Yes
MSR810-LMS, MSR810-LUS	No
MSR810-LMS-EA, MSR810-LME	No
MSR2600-6-X1, MSR2600-10-X1	No
MSR 2630	No
MSR3600-28, MSR3600-51	No
MSR3600-28-SI, MSR3600-51-SI	No
MSR3600-28-X1, MSR3600-28-X1-DP, MSR3600-51-X1, MSR3600-51-X1-DP	No
MSR3610-I-DP, MSR3610-IE-DP, MSR3610-IE-ES, MSR3610-IE-EAD, MSR3610-I-IG, MSR3610-IE-IG	No
MSR3610-X1, MSR3610-X1-DP, MSR3610-X1-DC, MSR3610-X1-DP-DC	No
MSR 3610, MSR 3620, MSR 3620-DP, MSR 3640, MSR 3660	No
MSR3610-G, MSR3620-G	No

‌

Hardware	Lighttpd Web service compatibility
MSR810-W-WiNet, MSR810-LM-WiNet	Yes
MSR830-4LM-WiNet	Yes
MSR830-5BEI-WiNet, MSR830-6EI-WiNet, MSR830-10BEI-WiNet	Yes
MSR830-6BHI-WiNet, MSR830-10BHI-WiNet	Yes
MSR2600-6-WiNet , MSR2600-10-X1-WiNet	No
MSR2630-WiNet	No
MSR3600-28-WiNet	No
MSR3610-X1-WiNet	No
MSR3610-WiNet, MSR3620-10-WiNet, MSR3620-DP-WiNet, MSR3620-WiNet, MSR3660-WiNet	No

‌

Hardware	Lighttpd Web service compatibility
MSR2630-XS	No
MSR3600-28-XS	No
MSR3610-XS	No
MSR3620-XS	No
MSR3610-I-XS	No
MSR3610-IE-XS	No

‌

Hardware	Lighttpd Web service compatibility
MSR810-LM-GL	Yes
MSR810-W-LM-GL	Yes
MSR830-6EI-GL	Yes
MSR830-10EI-GL	Yes
MSR830-6HI-GL	Yes
MSR830-10HI-GL	Yes
MSR2600-6-X1-GL	No
MSR3600-28-SI-GL	No

‌

light-http server directory

Use light-http server directory to specify the lighttpd Web service working directory.

Syntax

light-http server directory directory

undo light-http server directory

Default

No lighttpd Web service working directory is specified.

Views

System view

Predefined user roles

network-admin

Parameters

directory: Specifies the lighttpd Web service working directory.

Usage guidelines

If the lighttpd Web server is already enabled, the specified lighttpd Web service working directory takes effect after you disable the lighttpd Web server and then enable the server again.

To use the lighttpd Web server to provide HTTPS access service, you must save the required certificate to the lighttpd Web service working directory.

Examples

# Set the lighttpd Web service working directory to flash:/lighttpd.

<Sysname> system-view

[Sysname] light-http server directory flash:/lighttpd

Related commands

light-http server enable

light-http server enable

Use light-http server enable to enable the lighttpd Web server.

Use undo light-http server enable to disable the lighttpd Web server.

Syntax

light-http server enable

undo light-http server enable

Default

The lighttpd Web server is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

Specify the lighttpd Web working directory before enabling the lighttpd Web server.

For the lighttpd Web server to provide lightweight HTTP or HTTPS access service correctly, make sure it uses different service ports than other services. By default, the lightweight HTTP service port number is 80 and the lightweight HTTPS service port number is 443.

Examples

# Enable the lighttpd Web server.

<Sysname> system-view

[Sysname] light-http server enable

Related commands

light-http server directory

light-http server http-port

Use light-http server http-port to specify the lightweight HTTP service port number.

Use undo light-http server http-port to restore the default.

Syntax

light-http server http-port port-number

undo light-http server http-port

Default

The lightweight HTTP service port number is 80.

Views

System view

Predefined user roles

network-admin

Parameters

port-number: Specifies the lightweight HTTP service port number, in the range of 1 to 65535.

Usage guidelines

When the lighttpd Web server is enabled, changing the lightweight HTTP service port number re-enables the lighttpd Web server and closes all lightweight HTTP and HTTPS connections. To log in again, users must enter the new URL in the Web browser's address bar.

Examples

# Set the lightweight HTTP service port number to 8080.

<Sysname> system-view

[Sysname] light-http server http-port 8080

Current configuration will restart the lighttpd service. Continue? [Y/N]:

light-http server https-port

Use light-http server https-port to specify the lightweight HTTPS service port number.

Use undo light-http server https-port to restore the default.

Syntax

light-http server https-port port-number

undo light-http server https-port

Default

The lightweight HTTPS service port number is 443.

Views

System view

Predefined user roles

network-admin

Parameters

port-number: Specifies the lightweight HTTPS service port number, in the range of 1 to 65535.

Usage guidelines

When the lighttpd Web server is enabled, changing the lightweight HTTPS service port number re-enables the lighttpd Web server and closes all lightweight HTTP and HTTPS connections. To log in again, users must enter the new URL in the Web browser's address bar.

Examples

# Set the lightweight HTTPS service port number to 8081.

<Sysname> system-view

[Sysname] light-http server https-port 8081

Current configuration will restart the lighttpd service. Continue? [Y/N]: