# Devices A and B are connected to the outside AS. In BGP-VPNv4 subaddress family view of Device B, set the default local preference of Device B to 180, so that when a destination in the outside AS can be reached through both A and B, the BGP VPN-IPv4 route going through B to the destination is preferred.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv4-family vpnv4

[Sysname-bgp-af-vpnv4] default local-preference 180

# Devices A and B are connected to the outside AS. In BGP-VPNv6 subaddress family of Device B, set the default local preference of device B to 180, so that when a destination in the outside AS can be reached through both A and B, the BGP VPN-IPv6 route going through B to the destination is preferred.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family vpnv6

[Sysname-bgp-af-vpnv6] default local-preference 180

default med (BGP-VPNv4/BGP-VPNv6 subaddress family view)

Syntax

default med med-value

undo default med

View

BGP-VPNv4 subaddress family view, BGP-VPNv6 subaddress family view

Default level

2: System level

Parameters

med-value: Default value of the Multi-Exit-Discriminator (MED), in the range of 0 to 4294967295.

Description

Use default med to set the default value of the system MED.

Use undo default med to restore the default.

By default, the default system MED value is 0.

With other criteria the same, the system selects the route with a smaller MED value as the AS external route.

Examples

# Set the default MED to 10 in BGP-VPNv4 subaddress family view.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv4-family vpnv4

[Sysname-bgp-af-vpnv4] default med 10

# Set the default MED to 10 in BGP-VPNv6 subaddress family view.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family vpnv6

[Sysname-bgp-af-vpnv6] default med 10

description (VPN instance view)

Syntax

description text

undo description

View

VPN instance view

Default level

2: System level

Parameters

text: Description for the VPN instance, a string of 1 to 80 characters.

Description

Use description to configure a description for a VPN instance.

Use undo description to delete the description.

Examples

# Configure the description of VPN instance vpn1.

<Sysname> system-view

[Sysname] ip vpn-instance vpn1

[Sysname-vpn-instance-vpn1] description This is vpn1

display bgp vpnv4 all routing-table

Syntax

display bgp vpnv4 all routing-table [ [ network-address [ { mask | mask-length } [ longer-prefixes ] ] | as-path-acl as-path-acl-number | cidr | community [ aa:nn ]&<1-13> [ no-advertise | no-export | no-export-subconfed ] * [ whole-match ] | community-list { { basic-community-list-number | comm-list-name } [ whole-match ] | adv-community-list-number } | different-origin-as | peer ip-address { advertised-routes | received-routes } [ statistic ] | statistic ] [ | { begin | exclude | include } regular-expression ] | regular-expression as-regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

network-address: IP address of the destination segment.

mask: Network mask, in dotted decimal notation.

mask-length: Length of the network mask, in the range of 0 to 32.

longer-prefixes: Displays each routing entry that meets the following conditions:

1. Its destination IP address ANDed with the specified prefix equals the specified destination IP address ANDed with the specified prefix.

2. Its prefix length is shorter than or equal to the specified prefix length.

3. Its prefix length is the longest among the entries meeting the above two conditions.

as-path-acl as-path-acl-number: Filters routing information using the specified AS_PATH list. The as-path-acl-number argument is in the range of 1 to 256.

cidr: Displays Classless Inter-Domain Routing (CIDR) information.

community: Displays routing information for the specified BGP community in the routing table.

aa:nn&<1-13>: Community number. Both the aa and nn parameters range from 0 to 65535. &<1-13> means that you can enter the parameter combination up to 13 times.

no-advertise: A route with this attribute is not advertised to any other BGP peer.

no-export: A route with this attribute is not advertised out of the local AS or, if existing, the confederation. However, it is advertised to the other sub-ASs in the confederation.

no-export-subconfed: A route with this attribute is not advertised out of the local AS or to the other sub-ASs in the confederation.

whole-match: Performs exact match.

community-list: Displays routing information for the specified BGP community list in the routing table.

basic-community-list-number: Basic community list number in the range of 1 to 99.

comm-list-name: Name of a community attribute list, a string of 1 to 31 characters that contains at least one non-digit character.

adv-community-list-number: Advanced community list number in the range of 100 to 199.

different-origin-as: Displays information about routes with different AS origins.

peer ip-address: Specifies a peer by its IP address.

advertised-routes: Specifies the routing information sent to the specified peer.

received-routes: Specifies the routing information received from the specified peer.

statistic: Displays BGP VPNv4 route statistics.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

regular-expression as-regular-expression: Displays routing information matching the specified AS_PATH regular expression.

Description

Use display bgp vpnv4 all routing-table to display all BGP VPNv4 routing information.

Examples

# Display all BGP VPNv4 routing information.

<Sysname> display bgp vpnv4 all routing-table

BGP Local router ID is 2.2.2.2

Status codes: * - valid, ^ - VPN best, > - best, d - damped,

h - history, i - internal, s - suppressed, S - Stale

Origin : i - IGP, e - EGP, ? - incomplete

Total number of routes from all PE: 2

Route Distinguisher: 100:1

Network NextHop In/Out Label MED LocPrf

* i 10.0.0.0 1.1.1.1 1025 /NULL 0 100

*^ i 123.1.1.1/32 1.1.1.1 1024 /NULL 0 100

Total routes of vpn-instance vpn1: 5

Network NextHop In/Out Label MED LocPrf

*^>i 10.0.0.0 1.1.1.1 0 100

* > 10.1.1.0/24 0.0.0.0 NULL /1025 0

* > 20.0.0.0 10.1.1.1 NULL /1026 0

* >i 123.1.1.1/32 1.1.1.1 0 100

* > 124.1.1.1/32 0.0.0.0 NULL /1024 0

# Display detailed information about the BGP VPNv4 routes with prefix 1.1.1.2 /32.

<Sysname> display bgp vpnv4 all routing-table 1.1.1.2 32

BGP local router ID : 3.3.3.9

Local AS number : 100

Route Distinguisher: 100:1

Paths: 1 available, 0 best, 1 VPN best

BGP routing table entry information of 1.1.1.2/32:

Label information (Received/Applied): 1034/NULL

From : 1.1.1.9 (1.1.1.9)

Original nexthop: 1.1.1.9

Ext-Community : <RT: 111:1>

AS-path : 65410

Origin : incomplete

Attribute value : MED 0, localpref 100, pref-val 0, pre 255

State : valid, internal, VPN best,

Not advertised to any peers yet

Total Number of Routes: 1(vpna)

Paths: 1 available, 1 best, 0 VPN best

BGP routing table entry information of 1.1.1.2/32:

From : 1.1.1.9 (1.1.1.9)

Relay Nexthop : 0.0.0.0

Original nexthop: 1.1.1.9

Ext-Community : <RT: 111:1>

AS-path : 65410

Origin : incomplete

Attribute value : MED 0, localpref 100, pref-val 0, pre 255

State : valid, internal, best,

Not advertised to any peers yet

Not advertised to any VPN peers yet

Table 1 Command output

Field	Description
BGP Local router ID	Router ID of the local BGP router.
Status codes	Route status codes. Valid values include: · * - valid—Valid route. · ^ - VPN best—VPN best route. · > - best—Common best route. · d - damped—Route damped for route flap. · h - history—History route. · i - internal—Internal route. · s - suppressed—Suppressed route. · S - Stale—Stale route.
Origin	Route origin codes. Valid values include: · i -– IGP—Learned from within the AS. · e -– EGP—Learned through EGP. · ? -– incomplete—Learned in any other way.
Total number of routes from all PE	Total number of VPNv4 routes from all PEs.
Network	Network address.
NextHop	Address of the next hop.
In/Out Label	Incoming and outgoing labels.
MED	Metric associated with the destination network.
LocPrf	Local preference value.
Paths	Counts of routes: · available—Number of available routes. · best—Number of best routes.
Label information	Route label information. · Received—Received label information. · Applied—Locally generated label information.
Ext-Community	Extended community attribute.
AS-path	The route's AS path attribute (AS_PATH), which records all ASs the route has passed, and can avoid route loops.
Attribute value	BGP routing attribute information.
localpref	Local precedence.
pref-val	Preference value.
pre	Protocol priority.
State	Route status: · valid—Valid route. · internal—Internal route. · external—External route. · local—Locally generated route. · synchronize—Synchronized route. · best—Best route.

display bgp vpnv4 group

Syntax

display bgp vpnv4 { all | vpn-instance vpn-instance-name } group [ group-name ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

all: Specifies all VPNv4 peers.

vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31 characters.

group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display bgp vpnv4 group to display information about a specific BGP VPNv4 peer group or all BGP VPNv4 peer groups.

Examples

# Display information about the BGP VPNv4 peer group a for the VPN instance vpn1.

<Sysname> display bgp vpnv4 vpn-instance vpn1 group a

BGP peer-group is a

remote AS number not specified

Type : external

Maximum allowed prefix number: 150000

Threshold: 75%

Configured hold timer value: 180

Keepalive timer value: 60

Minimum time between advertisement runs is 30 seconds

Optional capabilities:

ORF advertise capability based on Prefix(type 64):

Local : both

Peer Preferred Value: 99

No routing policy is configured

Members:

Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State

10.1.1.1 200 18 21 0 1 00:12:58 Established

Table 2 Command output

Field	Description
BGP peer-group	Name of the BGP peer group.
remote AS number	Number of the remote AS.
Type	Type of the BGP peer group.
Maximum allowed prefix number	Maximum number of routes that can be learned from the peers in the peer group.
Threshold	Threshold for warning. When the percentage of the number of the received route prefixes to the maximum number of routes supported reaches this value, the switch generates a prompt.
Configured hold timer value	Setting of the hold timer.
Keepalive timer value	Keepalive interval.
Optional capabilities	Optional extended capabilities enabled for the peer group.
ORF advertise capability	Outbound Route Filtering (ORF) capability supported by the peer group.
Local	Indicates whether the local device supports sending and receiving Route-refresh packets with ORF information. The value can be: · Both—Supports sending and receiving Route-refresh messages with ORF information. · Send—Supports sending Route-refresh messages with ORF information. · Receive—Supports receiving Route-refresh messages with ORF information.
Peer Preferred Value	Preference value configured for routes received from the peer.
Peer	IP address of the peer.
AS	AS number of the peer group.
MsgRcvd	Number of messages received.
MsgSent	Number of messages sent.
OutQ	Number of messages waiting to be sent to the peer.
PrefRcv	Number of prefixes received.
Up/Down	Duration of the BGP session in the current state.
State	Status of the peer.

display bgp vpnv4 network

Syntax

display bgp vpnv4 { all | vpn-instance vpn-instance-name } network [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

all: Specifies all VPNv4 peers.

vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31 characters.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display bgp vpnv4 network to display information about BGP VPNv4 routes injected into a specific VPN instance or all VPN instances.

Examples

# Display information about BGP VPNv4 routes injected into VPN instance vpn1.

<Sysname> display bgp vpnv4 vpn-instance vpn1 network

BGP Local Router ID is 1.1.1.1.

Local AS Number is 100.

Network Mask Route-policy Short-cut

10.0.0.0 255.0.0.0

Table 3 Command output

Field	Description
BGP Local Router ID	Router ID of the local BGP router.
Network	Advertised network route.
Mask	Mask of the advertised network route.
Route-policy	Routing policy configured.
Short-cut	Whether this route is a short-cut route.

display bgp vpnv4 paths

Syntax

display bgp vpnv4 { all | vpn-instance vpn-instance-name } paths [ as-regular-expression | { | { begin | exclude | include } regular-expression } ]

View

Any view

Default level

1: Monitor level

Parameters

all: Specifies all VPNv4 peers.

vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31 characters.

as-regular-expression: Regular expression for filtering the AS path information to be displayed.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display bgp vpnv4 paths to display the BGP VPNv4 AS path information.

Examples

# Display the BGP VPNv4 AS path information for VPN instance vpn1.

<Sysname> display bgp vpnv4 vpn-instance vpn1 paths

Address Hash Refcount MED Path/Origin

0x6E72D18 0 1 0 200?

0x6E72E50 0 1 0 i

0x6E72B78 1 1 0 ?

0x6E72BE0 1 2 0 ?

# Display all BGP VPNv4 AS path information.

<Sysname> display bgp vpnv4 all paths

Address Hash Refcount MED Path/Origin

0x6E72D80 4 1 0 200?

0x6E72CB0 15 2 0 ?

Table 4 Command output

Field	Description
Address	Routing address in the local database.
Hash	Hash bucket for storing routes.
Refcount	Number of times that the path is referenced.
MED	Metric for routes.
Path/Origin	AS_PATH and origin attributes of the route. For more information, see Table 1.

display bgp vpnv4 peer

Syntax

display bgp vpnv4 all peer [ ip-address verbose | verbose ] [ | { begin | exclude | include } regular-expression ]

display bgp vpnv4 vpn-instance vpn-instance-name peer [ group-name log-info | ip-address { log-info | verbose } | verbose ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

all: Specifies all VPNv4 peers.

vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31 characters.

group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.

log-info: Displays log information.

ip-address: IP address of the peer.

verbose: Displays detailed information.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display bgp vpnv4 peer to display information about BGP VPNv4 peers.

Examples

# Display information about BGP VPNv4 peers of VPN instance vpn1.

<Sysname> display bgp vpnv4 vpn-instance vpn1 peer

BGP local router ID : 2.2.2.2

Local AS number : 100

Total number of peers : 1 Peers in established state : 1

Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State

10.1.1.1 200 24 29 0 1 00:18:47 Established

Table 5 Command output

Field	Description
BGP Local router ID	Router ID of the local BGP router.
Peers in established state	Number of peers in the state of established.
Peer	IP address of the peer.
AS	AS number of the peer group.
MsgRcvd	Number of messages received.
MsgSent	Number of messages sent.
OutQ	Number of messages waiting to be sent to the peer.
PrefRcv	Number of received prefixes.
Up/Down	Duration of the BGP session in the current state.
State	Status of the peer.

# Display detailed information about BGP VPNv4 peers of VPN instance vpn1.

<Sysname> display bgp vpnv4 vpn-instance vpn1 peer verbose

Peer: 10.1.1.1 Local: 2.2.2.2

Type: EBGP link

BGP version 4, remote router ID 10.1.1.1

BGP current state: Established, Up for 00h19m26s

BGP current event: KATimerExpired

BGP last state: OpenConfirm

Port: Local - 179 Remote - 1025

Configured: Active Hold Time: 180 sec Keepalive Time:60 sec

Received : Active Hold Time: 180 sec

Negotiated: Active Hold Time: 180 sec

Peer optional capabilities:

Peer support bgp multi-protocol extended

Peer support bgp route refresh capability

Address family IPv4 Unicast: advertised and received

Received: Total 25 messages, Update messages 1

Sent: Total 30 messages, Update messages 4

Maximum allowed prefix number: 150000

Threshold: 75%

Minimum time between advertisement runs is 30 seconds

Optional capabilities:

ORF advertise capability based on Prefix(type 64):

Local: both

Negotiated: send

Peer Preferred Value: 99

BFD: Enabled

Routing policy configured:

No routing policy is configured

Table 6 Command output

Field	Description
Peer	IP address of the peer.
Local	IP address of the local router.
Type	BGP type.
BGP version	Version of BGP that the peer runs.
remote router ID	Router ID of the remote router.
BGP current state	Current state of the BGP session.
Up for	Duration since the peer is established.
BGP current event	Current event of the BGP session.
BGP last state	State that the BGP session was in before transitioning to the current state.
Port	Local and remote ports of the BGP session.
Configured	Settings of the local timers, including the active hold interval and keepalive interval.
Received	Received active hold interval.
Negotiated	Negotiated active hold interval.
Peer optional capabilities	Optional capabilities of the peer.
Peer support bgp multi-protocol extended	The peer supports multiprotocol extension.
Peer support bgp route refresh capability	The peer supports route refresh capability.
Address family IPv4 Unicast	IPv4 unicast family capability.
Received	Total number of received messages and the number of received update messages.
Sent	Total number of sent messages and the number of sent update messages.
Maximum allowed prefix number	Maximum number of routes that can be learned from the peer.
Threshold	Threshold for warning. When the percentage of the number of the received route prefixes to the maximum number of routes supported reaches this value, the switch generates a prompt.
Optional capabilities	Local optional capabilities.
ORF advertise capability based on prefix (type 64):	The ORF address prefix capability is supported. The capability value is 64.
Local	Indicates whether the local device supports sending and receiving Route-refresh packets with ORF information. The value can be: · both—Supports sending and receiving Route-refresh messages with ORF information. · send—Supports sending Route-refresh messages with ORF information. · receive—Supports receiving Route-refresh messages with ORF information.
Negotiated	ORF capability negotiated by the local and remote peers. The value can be: · send—The local peer can send Route-refresh messages with ORF information and the remote peer can receive Route-refresh messages with ORF information. · receive—The local peer can receive Route-refresh messages with ORF information and the remote peer can send Route-refresh messages with ORF information. This field is displayed only when the ORF capability negotiation is successful.
Peer Preferred Value	Preference value configured for the routes from the peer.
BFD	Whether BFD is enabled for the peer.

# Display all BGP VPNv4 peer information.

<Sysname> display bgp vpnv4 all peer

BGP local router ID : 2.2.2.2

Local AS number : 100

Total number of peers : 1 Peers in established state : 1

Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State

1.1.1.1 100 51 64 0 2 00:45:16 Established

Table 7 Command output

Field	Description
Peer	IP address of the peer.
AS	AS number.
MsgRcvd	Number of messages received.
MsgSent	Number of messages sent.
OutQ	Number of messages waiting to be sent to the peer.
Up/Down	Duration of the BGP session in the current state.
State	Status of the peer.

# Display detailed information about BGP VPNv4 peer 1.1.1.1.

<Sysname> display bgp vpnv4 all peer 1.1.1.1 verbose

Peer: 1.1.1.1 Local: 2.2.2.2

Type: IBGP link

BGP version 4, remote router ID 1.1.1.1

BGP current state: Established, Up for 00h46m01s

BGP current event: RecvKeepalive

BGP last state: OpenConfirm

Port: Local - 1039 Remote - 179

Configured: Active Hold Time: 180 sec Keepalive Time:60 sec

Received : Active Hold Time: 180 sec

Negotiated: Active Hold Time: 180 sec

Peer optional capabilities:

Peer support bgp multi-protocol extended

Peer support bgp route refresh capability

Address family IPv4 Unicast: advertised and received

Address family VPNv4: advertised and received

Received: Total 52 messages, Update messages 2

Sent: Total 65 messages, Update messages 5

Maximum allowed prefix number: 150000

Threshold: 75%

Minimum time between advertisement runs is 15 seconds

Optional capabilities:

ORF advertise capability based on Prefix(type 64):

Local: both

Negotiated: send

Connect-interface has been configured

Peer Preferred Value: 0

BFD: Enabled

Routing policy configured:

No routing policy is configured

Table 8 Command output

Field	Description
Peer	IP address of the peer.
Local	IP address of the local router.
Type	BGP type.
BGP version	Version of BGP that the peer runs.
remote router ID	Router ID of the remote router.
BGP current state	Current status of BGP.
Up for	Duration since the peer is established.
BGP current event	Current event of the peer.
BGP last state	State that BGP was in before transitioning to the current status.
Port	Local and remote BGP port numbers.
Configured	Settings of the local timers, including the active hold interval and keepalive interval.
Received	Received active hold interval.
Negotiated	Negotiated active hold interval.
Peer optional capabilities	Optional capabilities of the peer.
Peer support bgp multi-protocol extended	The peer supports multiprotocol extension.
Peer support bgp route refresh capability	The peer supports route refresh capability.
Address family IPv4 Unicast	IPv4 unicast family capability.
Address family VPNv4	IPv4 address group VPNv4 capability.
Received	Total number of received messages and the number of received update messages.
Sent	Total number of sent messages and the number of sent update messages.
Maximum allowed prefix number	Maximum number of routes that can be learned from the peer.
Threshold	Threshold for warning. When the percentage of the number of the received route prefixes to the maximum number of routes supported reaches this value, the switch generates a prompt.
Optional capabilities	Local optional capabilities.
ORF advertise capability based on prefix (type 64):	The ORF address prefix capability is supported. The capability value is 64.
Local	Indicates whether the local device supports sending and receiving Route-refresh packets with ORF information. The value can be: · both—Supports sending and receiving Route-refresh messages with ORF information. · send—Supports sending Route-refresh messages with ORF information. · receive—Supports receiving Route-refresh messages with ORF information.
Negotiated	ORF capability negotiated by the local and remote peers. The value can be: · send—The local peer can send Route-refresh messages with ORF information and the remote peer can receive Route-refresh messages with ORF information. · receive—The local peer can receive Route-refresh messages with ORF information and the remote peer can send Route-refresh messages with ORF information. This field is displayed only when the ORF capability negotiation is successful.
Connect-interface	Whether a source interface is configured for TCP connection establishment.
Peer Preferred Value	Preference value configured for routes from the peer.
BFD	Whether BFD is enabled for the peer.

# Display the log information for the BGP VPNv4 peer whose address is 1.1.1.1.

<sysname> display bgp vpnv4 vpn-instance vpn1 peer 1.1.1.1 log-info

Peer : 1.1.1.1

Date Time State Notification

Error/SubError

10-Jul-2008 15:46:17 Down Send Notification with Error 1/1

Message Header Error/Connection Not Synchronized

10-Jul-2008 09:23:00 Up

10-Jul-2008 07:46:17 Down Receive Notification with Error 3/2

UPDATE Message Error/Unsupported optional Parameter

10-Jul-2008 06:23:00 Up

10-Jul-2008 05:46:17 Down Send Notification with Error 6/4

Administrative Reset

Table 9 Command output

Field	Description
Peer	IPv4 address of the peer.
Date	Date when the notification message is sent or received.
Time	Time when the notification message is sent or received.
State	Connection state of the peer: · Up—The BGP session is in the Established state. · Down—The BGP session has been cut down.
Notification	Notification message.
Error/SubError	Error: Notification message error code, which specifies the error type.
Error/SubError	SubError: Notification message's error subcode, which specifies detailed information about the error.

display bgp vpnv4 peer received ip-prefix

Syntax

display bgp vpnv4 { all | vpn-instance vpn-instance-name } peer ip-address received ip-prefix [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

all: Specifies all VPNv4 peers.

vpn-instance vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31 characters.

ip-address: IP address of the BGP peer.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display bgp vpnv4 peer received ip-prefix to display the IP prefix information for the ORF packets received from the specified BGP peer.

Example

# Display the ORF IP prefix information received from BGP peer 10.110.25.20.

<Sysname> display bgp vpnv4 all peer 10.110.25.20 received ip-prefix

ORF ip-prefix entries: 2

ge: greater-equal le: less-equal

index rule prefix ge le

10 permit 111.111.111.0/24 26 32

20 deny 2.1.1.0/24 26 32

Table 10 Command output

Field	Description
ORF ip-prefix entries	Number of ORF IP prefix entries.
index	Index of the IP prefix.
rule	Matching rule of the IP prefix.
ge	greater-equal, which means the mask length is greater than or equal to the displayed value.
le	less-equal, which means the mask length is less than or equal to the displayed value.

display bgp vpnv4 route-distinguisher routing-table

Syntax

display bgp vpnv4 route-distinguisher route-distinguisher routing-table [ [ network-address [ mask | mask-length ] | as-path-acl as-path-acl-number | cidr | community [ aa:nn ]&<1-13> [ no-advertise | no-export | no-export-subconfed ] * [ whole-match ] | community-list { { basic-community-list-number | comm-list-name } [ whole-match ] | adv-community-list-number } | different-origin-as ] [ | { begin | exclude | include } regular-expression ] | regular-expression as-regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

route-distinguisher: Route distinguisher (RD).

network-address: IP address of the destination segment.

mask: Network mask, in the format of X.X.X.X.

mask-length: Length of the network mask, in the range of 0 to 32.

as-path-acl as-path-acl-number: Filters routing information using the specified AS_PATH list. The as-path-acl-number argument is in the range of 1 to 256.

cidr: Displays Classless Interdomain Routing (CIDR) information.

community: Displays routing information for the specified BGP community in the routing table.

aa:nn&<1-13>: Community number. Both the aa and nn parameters range from 0 to 65535. &<1-13> means that you can enter the parameter combination up to 13 times.

no-advertise: A route with this attribute is not advertised to any other BGP peer.

no-export: A route with this attribute is not advertised out of the local AS or, if existing, the confederation. However, it is advertised to the other sub-ASs in the confederation.

no-export-subconfed: A route with this attribute is not advertised out of the local AS or to the other sub-ASs in the confederation.

whole-match: Performs exact matching.

community-list: Displays routing information for the specified BGP community list.