| Title | Size | Downloads |
|---|---|---|
| H3C LSQM1TGS16FD0 Card Manual-6PW103.pdf | 28.80 KB |
- Table of Contents
- Related Documents
-
16-port 10GBASE-R-SFP+ optical Ethernet interface card—LSQM1TGS16FD0
1 Card identifier
The card identifier LSQM1TGS16FD0 is in the upper right corner of the front panel.
2 Specifications
Table 1 Card specifications
|
Item |
Specification |
|
Card size (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
|
SDRAM (DDR3) |
2GB |
|
Power consumption |
54W to 90W |
|
Ports |
16 x 10GBASE-R-SFP+ fiber port |
|
Connector type |
RJ-45/LC |
|
Port speed |
10 Gbps |
|
Transmission medium and max transmission distance |
10GBASE-R-SFP+ fiber port: see Table 2, Table 3, and Table 4 |
|
Applicable hardware platforms |
· All S7500E models · All S7500X models |
|
Applicable host software versions |
Version 7536 and later |
Table 2 describes the SFP transceiver modules available for the SFP+ ports on the card
Table 2 SFP transceiver module specifications
|
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-GE-T |
N/A |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
|
SFP-GE-T-D |
N/A |
RJ-45 |
Category-5 twisted pair cable |
100 m (0.06 miles) |
|
SFP-GE-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (0.34 miles) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
275 m (0.17 miles) |
|
|
SFP-GE-SX-MM850-D |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (0.34 miles) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
275 m (0.17 miles) |
|
|
SFP-GE-LX-SM1310-A |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
1310 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
1310 nm |
LC |
62.5/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
SFP-GE-LX-SM1310-D |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
1310 nm |
LC |
50/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
1310 nm |
LC |
62.5/125 μm multi-mode optical fiber |
550 m (1804.46 ft) |
|
|
SFP-GE-LH40-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1310-D |
1310nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-GE-LH80-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-GE-LH80-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-GE-LH100-SM1550 |
1550 nm |
LC |
9/125 μm single-mode optical fiber |
100 km (62.14 miles) |
|
SFP-GE-LX-SM1310-BIDI |
RX: 1490 nm TX: 1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-GE-LX-SM1490-BIDI |
RX: 1310 nm TX: 1490 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
|
NOTE: · BIDI modules use different central wavelengths in transmit and receive directions, in order to implement bidirectional transmission of optical signals over the same fiber. · BIDI modules must be used in pairs. For example, if an SFP-GE-LX-SM1310-BIDI is used at one end, an SFP-GE-LX-SM1490-BIDI must be used at the other end. |
Table 3 describes the SFP+ transceiver modules available for the SFP+ ports on the card.
Table 3 SFP+ transceiver module specifications
|
Module |
Central wavelength |
Connector type |
Cable specifications |
Maximum transmission distance |
|
SFP-XG-SX-MM850-A |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-D |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-E |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-SX-MM850-F1 |
850 nm |
LC |
50/125 μm multi-mode optical fiber |
300 m (984.25 ft) |
|
850 nm |
LC |
62.5/125 μm multi-mode optical fiber |
33 m (108.27 ft) |
|
|
SFP-XG-LX-SM1310 |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LX-SM1310-D |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LX-SM1310-E |
1310 nm |
LC |
9/125 μm single-mode optical fiber |
10 km (6.21 miles) |
|
SFP-XG-LH40-SM1550 |
1550nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-XG-LH40-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
40 km (24.86 miles) |
|
SFP-XG-LH80-SM1550 |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
|
SFP-XG-LH80-SM1550-D |
1550nm |
LC |
9/125 μm single-mode optical fiber |
80 km (49.71 miles) |
Table 4 describes the SFP+ DAC cables available for the SFP+ ports on the card.
Table 4 SFP+ DAC cable specifications
|
SFP+ DAC cable |
Cable length |
Data rate |
Cable type |
Remark |
|
LSWM1STK |
0.65 m (2.13 ft) |
10.31 Gbps |
SFP+ cable |
Use for connecting SFP+ ports |
|
LSWM2STK |
1.2 m (3.94 ft) |
|||
|
LSWM3STK |
3 m (9.84 ft) |
|||
|
LSTM1STK |
5 m (16.40 ft) |
|||
|
LSTM2STK |
7 m (22.97 ft) |
3 Related documentation
For module installation, see H3C S7500E Switch Series Installation Guide and H3C S7500X Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2016-2018 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
