Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 02-Appendix A Device Appearance and Hardware(HW) Specifications | 385.13 KB |
Appendix A Chassis views and technical specifications
Product view
H3C SecPath AFC2000-E10-G
On the faceplate of the H3C SecPath AFC2000-E10-G there are 4 interface module slots, 8 10/100/1000BASE-T autosensing Ethernet copper ports (including 1 Ethernet management port), 4 1000BASE-X Ethernet fiber ports, 2 USB ports, 1 Console port, and 1 drive expansion slot. The specific layout is shown in the following figure.
FigureA-1 H3C SecPath AFC2000-E10-G device front view
|
1: LED display |
2: Console port (CONSOLE) |
|
3: Drive expansion slot |
4: 1000BASE-X Ethernet optical port |
|
5: Interface module slot |
6: 10/100/1000BASE-T Ethernet copper ports; 0 is the Ethernet management interface |
|
7: USB port |
8: Device indication light |
FigureA-2 H3C SecPath AFC2000-E10-G device rear view
|
1: drive expansion slot |
2: fan |
|
3: device power switch |
4: power supply |
H3C SecPath AFC2000-E40-G
On the faceplate of the H3C SecPath AFC2000-E40-G there are 8 interface module slots, 2 Ethernet management ports, 2 USB ports, and 1 Console port. The specific layout is shown in the following figure.
FigureA-3 H3C SecPath AFC2000-E40-G device front view
|
1: Console port (CONSOLE) |
2: LED display |
|
3: Interface module slot |
4: Ethernet management interface |
|
5: USB port |
6: Device indication lights |
FigureA-4 H3C SecPath AFC2000-E40-G device rear view
|
1: Drive expansion slot |
2: Fan |
|
3: Device power switch |
4: Power supply |
Interface modules
The interface modules do not support hot swapping. If you need to replace an interface module, first power off the device, then perform the replacement.
TableA-1 Interface module list for H3C SecPath AFC2000-EX0-G series products
|
Interface module model |
Specifications |
Compatible device models |
|
NSQM1IPCGT4GP4A3 |
4-port Ethernet Giga copper port card + 4-port Ethernet Giga fiber port card |
H3C SecPath AFC2000-E40-G |
|
NSQM1IPCTG4A3 |
4-port Ethernet 10G fiber port card |
Dimensions and Weight Specifications
TableA-2 Dimensions and Weight Specifications
|
Item |
Dimensions (H × W × D), excluding rubber feet and mounting brackets |
Weight (net) |
|
H3C SecPath AFC2000-E10-G |
600mmx440mmx89mm |
15.18Kg |
|
H3C SecPath AFC2000-E40-G |
600mmx440mmx89mm |
15.76Kg |
Storage media
TableA-3 Storage media
|
Item |
Description |
|
Memory type and capacity |
· AFC2000-E10-G：32GB DDR4 · AFC2000-E40-G：64GB DDR5 |
|
drive storage |
4TB |
Power consumption
TableA-4 Chassis power consumption
|
Item |
Maximum power consumption |
|
H3C SecPath AFC2000-E10-G |
170W |
|
H3C SecPath AFC2000-E40-G |
300W |
Power supply specifications
TableA-5 Standard AC power supply specifications
|
Item |
Description |
|
Rated input voltage |
100V AC～240V AC；50/60Hz |
|
Max input current |
5A |
|
Max power |
350W |
|
Compatible device models |
H3C SecPath AFC2000-E10-G/AFC2000-E40-G |
TableA-6 Optional GW-CRPSD800-DC direct current (DC) power supply specifications
|
Item |
Description |
|
Model. |
GW-CRPSD800-DC |
|
Rated input voltage |
180V DC～310V DC |
|
Max input current |
3A |
|
Max power |
800W |
|
Compatible device models |
H3C SecPath AFC2000-E10-G/AFC2000-E40-G |
Port specifications
GE copper port
TableA-7 GE copper port specifications
|
Attribute |
Description |
|
|
Connector type |
RJ45 |
|
|
Compliant standard |
802.3, 802.3u, and 802.3ab |
|
|
Interface type |
MDI/MDI-X autosensing |
|
|
Cable type |
Category 5 or above twisted pair cable |
|
|
Transmission distance. |
100m |
|
|
Port speed and duplex mode |
10 Mbps, autosensing |
Half/full duplex, auto-negotiation |
|
100 Mbps, autosensing |
Half/full duplex, auto-negotiation |
|
|
1000 Mbps, autosensing |
Full duplex, auto-negotiation |
|
The media dependent interface (MDI) standard is typically used on the Ethernet port of network adapters. The media dependent interface crossover (MDI-X) standard is typically used on hubs or LAN switches.
GE fiber port
TableA-8 GE fiber port specifications
|
Attribute |
Description |
|
Connector type |
LC |
|
Transceiver module type |
SFP |
|
Compliant standard |
1000BASE-X |
|
Speed |
1000Mbps |
|
Operating mode |
Full duplex |
TableA-9 GE SFP transceiver modules available for the 1000BASE-X SFP ports
|
Cable model |
Center wavelength (nm) |
Fiber Mode |
Fiber diameter (µm) |
Mode bandwidth (MHz*km) |
Transmission distance. |
Port specifications (dBm) |
|
|
Tx optical power |
Receive power |
||||||
|
SFP-GE-SX-MM850-A |
850 |
MMF |
50/125 |
500 |
550m |
-9.5～0 |
-17～-3 |
|
400 |
500m |
||||||
|
62.5/125 |
200 |
275m |
|||||
|
160 |
220m |
||||||
|
160 |
220m |
||||||
|
SFP-GE-LX-SM1310-A |
1310 |
SMF |
9/125 |
- |
10km |
-9.5～-3 |
-20～-3 |
|
MMF |
50/125 |
500/400 |
550m |
||||
|
62.5/125 |
500 |
550m |
|||||
10 GE fiber port
TableA-10 10 GE fiber port specifications
|
Attribute |
Description |
|
Connector type |
LC |
|
Transceiver module type |
SFP+ |
|
Compliant standard |
10GBASE-R |
|
Speed |
LAN PHY mode: 10Gbps |
TableA-11 Specifications of 10GE SFP+ optical transceiver modules with LC connectors
|
Cable model |
Center wavelength (nm) |
Fiber Mode |
Fiber diameter (µm) |
Mode bandwidth (MHz*km) |
Transmission distance. |
Transmission rate |
Port specifications (dBm) |
|
|
Tx optical power |
Receive power |
|||||||
|
SFP-XG-SX-MM850-A |
850 |
MMF |
50/125 |
2000 |
300m |
10.31Gbps |
-7.3～-1 |
-9.9～+0.5 |
|
500 |
82m |
|||||||
|
400 |
66m |
|||||||
|
62.5/125 |
200 |
33m |
||||||
|
160 |
26m |
|||||||
|
160 |
8m |
|||||||
|
SFP-XG-LX220-MM1310 |
1310 |
MMF |
50/125 |
1500 |
220m |
10.31Gbps |
-6.5～+0.5 |
-6.5～+1.5 |
|
500 |
220m |
|||||||
|
400 |
100m |
|||||||
|
62.5/125 |
200 |
220m |
||||||
|
160 |
220m |
|||||||
|
SFP-XG-LX-SM1310 |
1310 |
SMF |
9/125 |
- |
10km |
10.31Gbps |
-8.2～+0.5 |
-14.4～+0.5 |