Contents

Using the CLI 1

CLI views· 1

Entering system view from user view·· 2

Returning to the upper-level view from any view·· 2

Returning to user view·· 2

Accessing the CLI online help· 2

Using the undo form of a command· 3

Entering a command· 3

Editing a command line· 4

Entering a text or string type value for an argument 4

Abbreviating commands· 4

Configuring and using command aliases· 5

Configuring and using command hotkeys· 6

Enabling redisplaying entered-but-not-submitted commands· 7

Understanding command-line error messages· 7

Using the command history function· 7

Controlling the CLI output 8

Pausing between screens of output 8

Numbering each output line from a display command· 9

Filtering the output from a display command· 10

Saving the output from a display command to a file· 12

Viewing and managing the output from a display command effectively· 13

Saving the running configuration· 14

 

Using the CLI

At the command-line interface (CLI), you can enter text commands to configure, manage, and monitor your device.

Figure 1 CLI example

 

You can use different methods to log in to the CLI, including through the console port, Telnet, and SSH. For more information about login methods, see "Login overview."

CLI views

Commands are grouped in different views by function. To use a command, you must enter its view.

CLI views are hierarchically organized, as shown in Figure 2. Each view has a unique prompt, from which you can identify where you are and what you can do. For example, the prompt [Sysname-vlan100] shows that you are in VLAN 100 view and can configure attributes for that VLAN.

Figure 2 CLI views

 

You are placed in user view immediately after you log in to the CLI. The user view prompt is <Device-name>, where Device-name indicates the device name. The device name is Sysname by default. You can change it by using the sysname command.

In user view, you can do the following:

·          Perform basic operations including display, debug, file management, FTP, Telnet, clock setting, and reboot.

·          Enter system view. The system view prompt is [Device-name].

In system view, you can do the following:

·          Configure settings that affect the device as a whole, such as the daylight saving time, banners, and hotkeys.

·          Enter different feature views. For example, you can enter interface view to configure interface parameters, enter VLAN view to add ports to the VLAN, and enter user line view to configure login user attributes.

A feature view might have child views.

To display all commands available in a view, enter a question mark (?) at the view prompt.

Entering system view from user view

Task	Command
Enter system view.	system-view

 

Returning to the upper-level view from any view

Task	Command
Return to the upper-level view from any view.	quit

 

Executing the quit command in user view terminates your connection to the device.

In public key view, use the peer-public-key end command to return to system view.

Returning to user view

To return directly to user view from any other view, use the return command or press Ctrl+Z.

 

Task	Command
Return directly to user view.	return

Accessing the CLI online help

The CLI online help is context sensitive. Enter a question mark at any prompt or in any position of a command to display all available options.

To access the CLI online help, use one of the following methods:

·          Enter a question mark at a view prompt to display the first keyword of every command available in the view. For example:

<Sysname> ?

User view commands:

  access-list         acl

  archive             Archive configuration

  backup              Backup the startup configuration file to a TFTP server

  blade

  boot-loader         Software image file management

…

·          Enter a space and a question mark after a command keyword to display all available keywords and arguments at the position.

¡  If the question mark is in the place of a keyword, the CLI displays all possible keywords, each with a brief description. For example:

<Sysname> terminal ?

  debugging  Enable to display debugging logs on the current terminal

  logging  Display logs on the current terminal

  monitor  Enable to display logs on the current terminal

¡  If the question mark is in the place of an argument, the CLI displays the description of the argument. For example:

<Sysname> system-view

[Sysname] interface vlan-interface ?

  <1-4094>  Vlan-interface interface number

[Sysname] interface vlan-interface 1 ?

  <cr>

[Sysname] interface vlan-interface 1

<1-4094> is the value range for the argument. <cr> indicates that the command is complete and you can press Enter to execute the command.

·          Enter an incomplete keyword string followed by a question mark to display all keywords starting with that string. For example:

<Sysname> f?

   fdisk

   fixdisk

   format

   free

   ftp

<Sysname> display ftp?

   ftp

   ftp-server

   ftp-user

Using the undo form of a command

Most configuration commands have an undo form for the following:

·          Canceling a configuration.

·          Restoring the default.

·          Disabling a feature.

For example, the info-center enable command enables the information center. The undo info-center enable command disables the information center.

Entering a command

When you enter a command, you can do the following:

·          Use keys or hotkeys to edit the command line.

·          Use abbreviated keywords or keyword aliases.

Editing a command line

To edit a command line, use the keys listed in Table 1 or the hotkeys listed in Table 3. When you are finished, you can press Enter to execute the command.

The total length of a command line cannot exceed 512 characters, including spaces and special characters.

Table 1 Command line editing keys

Keys	Function
Common keys	If the edit buffer is not full, pressing a common key inserts a character at the position of the cursor and moves the cursor to the right. The edit buffer can store up to 511 characters. Unless the buffer is full, all common characters that you enter before pressing Enter are saved in the edit buffer.
Backspace	Deletes the character to the left of the cursor and moves the cursor back one character.
Left arrow key (←)	Moves the cursor one character to the left.
Right arrow key (→)	Moves the cursor one character to the right.
Up arrow key (↑)	Gets the previous history command.
Down arrow key (↓)	Gets the next history command.
Tab	If you press Tab after entering part of a keyword, the system automatically completes the keyword: ·         If a unique match is found, the system displays the complete keyword. ·         If there is more than one match, press Tab multiple times to pick the keyword you want to enter. ·         If there is no match, the system does not modify what you entered but displays it again in the next line.

 

Entering a text or string type value for an argument

A text type argument value can contain printable characters except a question mark (?).

A string type argument value can contain printable characters except the following:

·          Question mark (?).

·          Quotation mark (").

·          Backward slash (\).

·          Space.

A specific argument might have more requirements. For more information, see the relevant command reference.

To enter a printable character, you can enter the character or its ASCII code in the range of 32 to 126.

Abbreviating commands

You can enter a command line quickly by entering incomplete keywords that uniquely identify the complete command. In user view, for example, commands starting with an s include startup saved-configuration and system-view. To enter the command system-view, you need to type only sy. To enter the command startup saved-configuration, type st s.

You can also press Tab to complete an incomplete keyword.

Configuring and using command aliases

You can configure an alias for a command or the starting keywords of commands, and use the alias to execute the command or commands.

For example, if you configure the alias siprt for display ip routing-table, you can enter siprt to execute the display ip routing-table command. If you configure the alias ship for display ip, you can use ship to execute all commands starting with display ip:

·          Enter ship routing-table to execute the display ip routing-table command.

·          Enter ship interface to execute the display ip interface command.

Usage guidelines

After you successfully execute a command by using an alias, the system saves the command, instead of the alias, to the running configuration.

The command string represented by an alias can include up to nine parameters. Each parameter starts with the dollar sign ($) and a sequence number in the range of 1 to 9. For example, you can configure the alias shinc for the display $1 | include $2 command. Then, you can enter shinc hotkey CTRL_C to execute the display hotkey | include CTRL_C command.

To use an alias for a command that has parameters, you must specify a value for each parameter. If you fail to do so, the system displays a command incomplete error message and the command string represented by the alias.

The system defines a set of command aliases, as listed in Table 2.

Table 2 System-defined command aliases

Alias	Command string
access-list	acl
end	return
erase	delete
exit	quit
hostname	sysname
logging	info-center
no	undo
show	display
write	save

 

Configuration procedure

To configure a command alias:

 

Step	Command	Remarks
1.       Enter system view.	system-view	N/A
2.       Configure a command alias.	alias alias command	By default, the system defines the command aliases listed in Table 2.
3.       (Optional.) Display command aliases.	display alias [ alias ]	This command is available in any view.

 

Configuring and using command hotkeys

The system defines the hotkeys shown in Table 3 and provides five configurable command hotkeys. Pressing a command hotkey is the same as entering a command.

If a hotkey is also defined by the terminal software you are using to interact with the device, the terminal software definition takes effect.

To configure a command hotkey:

 

Step	Command	Remarks
1.       Enter system view.	system-view	N/A
2.       Assign a command to a hotkey.	hotkey { ctrl_g | ctrl_l | ctrl_o | ctrl_t | ctrl_u } command	By default: ·         Ctrl+G is assigned the display current-configuration command. ·         Ctrl+L is assigned the display ip routing-table command. ·         Ctrl+O is assigned the undo debugging all command. ·         No command is assigned to Ctrl+T or Ctrl+U.
3.       (Optional.) Display hotkeys.	display hotkey	This command is available in any view.

 

Table 3 System-reserved hotkeys

Hotkey	Function
Ctrl+A	Moves the cursor to the beginning of a line.
Ctrl+B	Moves the cursor one character to the left.
Ctrl+C	Stops the current command.
Ctrl+D	Deletes the character at the cursor.
Ctrl+E	Moves the cursor to the end of a line.
Ctrl+F	Moves the cursor one character to the right.
Ctrl+H	Deletes the character to the left of the cursor.
Ctrl+K	Aborts the connection request.
Ctrl+R	Redisplays the current line.
Ctrl+V	Pastes text from the clipboard.
Ctrl+W	Deletes the word to the left of the cursor.
Ctrl+X	Deletes all characters to the left of the cursor.
Ctrl+Y	Deletes all characters to the right of the cursor.
Ctrl+Z	Returns to user view.
Ctrl+]	Terminates the current connection.
Esc+B	Moves the cursor back one word.
Esc+D	Deletes all characters from the cursor to the end of the word.
Esc+F	Moves the cursor forward one word.

 

Enabling redisplaying entered-but-not-submitted commands

Your input might be interrupted by system information output. If redisplaying entered-but-not-submitted commands is enabled, the system redisplays your input after finishing the output. You can then continue entering the command line.

To enable redisplaying entered-but-not-submitted commands:

 

Step	Command	Remarks
1.       Enter system view.	system-view	N/A
2.       Enable redisplaying entered-but-not-submitted commands.	info-center synchronous	By default, the system does not redisplay entered-but-not-submitted commands. For more information about this command, see Network Management and Monitoring Command Reference.

 

Understanding command-line error messages

After you press Enter to submit a command, the command line interpreter examines the command syntax.

·          If the command passes syntax check, the CLI executes the command.

·          If the command fails syntax check, the CLI displays an error message.

Table 4 Common command-line error messages

Error message	Cause
% Unrecognized command found at '^' position.	The keyword in the marked position is invalid.
% Incomplete command found at '^' position.	One or more required keywords or arguments are missing.
% Ambiguous command found at '^' position.	The entered character sequence matches more than one command.
% Too many parameters.	The entered character sequence contains excessive keywords or arguments.
% Wrong parameter found at '^' position.	The argument in the marked position is invalid.

 

Using the command history function

The system automatically saves commands successfully executed by a login user to two command history buffers:

·          Command history buffer for the user line.

·          Command history buffer for all user lines.

Table 5 Comparison between the two types of command history buffers

Item	Command history buffer for a user line	Command history buffer for all user lines
What kind of commands are stored in the buffer?	Commands successfully executed by the current user of the user line.	Commands successfully executed by all login users.
Cleared when the user logs out?	Yes.	No.
How to view buffered commands?	Use the display history-command command.	Use the display history-command all command.
How to call buffered commands?	·         In Windows 200x or Windows XP HyperTerminal or Telnet, use the up or down arrow key (↑ or ↓) to navigate to a command in the buffer and press Enter to execute the command again. ·         In Windows 9x HyperTerminal, use Ctrl+P and Ctrl+N to do so.	You cannot call buffered commands.
How to set the buffer size?	Use the history-command max-size size-value command in user line view to set the buffer size. By default, the buffer can store up to 10 commands.	You cannot set the buffer size. By default, the buffer can store up to 1024 commands.
How to disable the buffer?	Setting the buffer size to 0 disables the buffer.	You cannot disable the buffer.

 

The system follows these rules when buffering commands:

·          Buffering a command in the exact format in which the command was entered. For example, if you enter an incomplete command, the buffered command is also incomplete. If you enter a command with a command keyword alias, the buffered command also uses the alias.

·          If you enter a command in the same format multiple times in succession, the system buffers the command only once. If you enter a command in different formats multiple times, the system buffers each command format. For example, display cu and display current-configuration are buffered as two entries but successive repetitions of display cu create only one entry.

·          To buffer a new command when a buffer is full, the system deletes the oldest command entry in the buffer.

Controlling the CLI output

This section describes the CLI output control features that help you identify the desired output.

Pausing between screens of output

The system automatically pauses after displaying a screen if the output is too long to fit on one screen. You can use the keys described in "Output controlling keys" to display more information or stop the display.

By default, up to 24 lines can be displayed on a screen. You can change the limit by using the screen-length screen-length command. For more information about this command, see Fundamentals Command Reference.

You can also disable pausing between screens of output for the current session. Then, all output is displayed at one time and the screen is refreshed continuously until the final screen is displayed.

Output controlling keys

Keys	Function
Space	Displays the next screen.
Enter	Displays the next line.
Ctrl+C	Stops the display and cancels the command execution.
<PageUp>	Displays the previous page.
<PageDown>	Displays the next page.

 

Disabling pausing between screens of output

To disable pausing between screens of output, execute the following command in user view:

 

Task	Command	Remarks
Disable pausing between screens of output for the current session.	screen-length disable	The default for a session depends on the setting of the screen-length command in user line view. The default of the screen-length command is pausing between screens of output and displaying up to 24 lines on a screen. This command is a one-time command and takes effect only for the current session.

 

Numbering each output line from a display command

You can use the | by-linenum option to prefix each display command output line with a number for easy identification.

Each line number is displayed as a 5-character string and might be followed by a colon (:) or hyphen (-). If you specify the | by-linenum option and the | begin regular-expression option for a display command, a hyphen is displayed for all lines that do not match the regular expression.

To number each output line from a display command:

 

Task	Command
Number each output line from a display command.	display command | by-linenum

 

For example:

# Display information about VLAN 999, numbering each output line.

<Sysname> display vlan 999 | by-linenum

    1:  VLAN ID: 999

    2:  VLAN type: Static

    3:  Route interface: Configured

    4:  IP address: 192.168.2.1

    5:  Subnet mask: 255.255.255.0

    6:  Description: For LAN Access

    7:  Name: VLAN 0999

    8:  Tagged ports:   None

    9:  Untagged ports:

   10:      FortyGigE1/0/1

Filtering the output from a display command

You can use the | { begin | exclude | include } regular-expression option to filter the display command output:

·          begin—Displays the first line matching the specified regular expression and all subsequent lines.

·          exclude—Displays all lines not matching the specified regular expression.

·          include—Displays all lines matching the specified regular expression.

·          regular-expression—A case-sensitive string of 1 to 256 characters, which can contain the special characters described in Table 6.

The filtering operation takes time. The more complicated the regular expression is, the longer the filtering operation takes. To stop the operation, press Ctrl+C.

Table 6 Special characters supported in a regular expression

Characters	Meaning	Examples
^	Matches the beginning of a line.	"^u" matches all lines beginning with "u". A line beginning with "Au" is not matched.
$	Matches the end of a line.	"r$" matches all lines ending with "r". A line ending with "rA" is not matched.
. (period)	Matches any single character.	".s" matches "as" and "bs".
*	Matches the preceding character or string zero, one, or multiple times.	"zo*" matches "z" and "zoo", and "(zo)*" matches "zo" and "zozo".
+	Matches the preceding character or string one or multiple times.	"zo+" matches "zo" and "zoo", but not "z".
|	Matches the preceding or succeeding string.	"def|int" matches a line containing "def" or "int".
( )	Matches the string in the parentheses, usually used together with the plus sign (+) or asterisk sign (*).	"(123A)" matches "123A". "408(12)+" matches "40812" and "408121212", but not "408".
\N	Matches the preceding strings in parentheses, with the Nth string repeated once.	"(string)\1" matches a string containing "stringstring". "(string1)(string2)\2" matches a string containing "string1string2string2". "(string1)(string2)\1\2" matches a string containing " string1string2string1string2".
[ ]	Matches a single character in the brackets.	"[16A]" matches a string containing 1, 6, or A; "[1-36A]" matches a string containing 1, 2, 3, 6, or A (- is a hyphen). To match the character "]", put it immediately after "[", for example, []abc]. There is no such limit on "[".
[^]	Matches a single character that is not in the brackets.	"[^16A]" matches a string that contains at least one character except 1, 6, or A, such as "abc". A match can also contain 1, 6, or A (such as "m16"), but it cannot contain these three characters only (such as 1, 16, or 16A).
{n}	Matches the preceding character n times. The number n must be a nonnegative integer.	"o{2}" matches "food", but not "Bob".
{n,}	Matches the preceding character n times or more. The number n must be a nonnegative integer.	"o{2,}" matches "foooood", but not "Bob".
{n,m}	Matches the preceding character n to m times or more. The numbers n and m must be nonnegative integers and n cannot be greater than m.	" o{1,3}" matches "fod", "food", and "foooood", but not "fd".
\<	Matches a string that starts with the pattern following \<. A string that contains the pattern is also a match if the characters preceding the pattern are not digits, letters, or underscores.	"\<do" matches "domain" and "doa".
\>	Matches a string that ends with the pattern preceding \>. A string that contains the pattern is also a match if the characters following the pattern are not digits, letters, or underscores.	"do\>" matches "undo" and "cdo".
\b	Matches a word that starts with the pattern following \b or ends with the pattern preceding \b.	"er\b" matches "never", but not "verb" or "erase". "\ber" matches "erase", but not "verb" or "never".
\B	Matches a word that contains the pattern but does not start or end with the pattern.	"er\B" matches "verb", but not "never" or "erase".
\w	Same as [A-Za-z0-9_], matches a digit, letter, or underscore.	"v\w" matches "vlan" and "service".
\W	Same as [^A-Za-z0-9_], matches a character that is not a digit, letter, or underscore.	"\Wa" matches "-a", but not "2a" or "ba".
\	Escape character. If a special character listed in this table follows \, the specific meaning of the character is removed.	"\\" matches a string containing "\", "\^" matches a string containing "^", and "\\b" matches a string containing "\b".

 

For example:

# Use | begin line in the display current-configuration command to match the first line of output that contains line to the last line of output.

<Sysname> display current-configuration | begin line

line class aux

 user-role network-admin

#

line class vty

 user-role network-operator

#

line aux 1

 user-role network-admin

#

line vty 0 63

 authentication-mode scheme

 user-role network-operator

#

 ssh server enable

#

return

# Use | exclude Direct in the display ip routing-table command to filter out direct routes and display only the non-direct routes.

<Sysname> display ip routing-table | exclude Direct

 

         Destinations : 12       Routes : 12

 

Destination/Mask    Proto  Pre  Cost         NextHop         Interface

2.2.2.0/24          OSPF   10   2            1.1.2.2         FGE1/0/2

# Use | include snmp in the display current-configuration command to filter in entries that contain snmp.

<Sysname> display current-configuration | include snmp

snmp-agent

 snmp-agent community write private

 snmp-agent community read public

 snmp-agent sys-info version all

 snmp-agent target-host trap address udp-domain 192.168.1.26 params securityname public

Saving the output from a display command to a file

A display command shows certain configuration and operation information of the device. Its output might vary over time or with user configuration or operation. You can save the output to a file for future retrieval or troubleshooting.

Use one of the following methods to save the output from a display command:

·          Save the output to a separate file. Use this method if you want to use one file for a single display command.

·          Append the output to the end of a file. Use this method if you want to use one file for multiple display commands.

To save the output from a display command to a file, use one of the following commands in any view:

 

Task	Command
Save the output from a display command to a separate file.	display command > filename
Append the output from a display command to the end of a file.	display command >> filename

 

For example:

# Save the VLAN 1 settings to a separate file named vlan.txt.

<Sysname> display vlan 1 > vlan.txt

# Verify whether the VLAN 1 settings are saved to file vlan.txt.

<Sysname> more vlan.txt

VLAN ID: 1

 VLAN type: Static

 Route interface: Not configured

 Description: VLAN 0001

 Name: VLAN 0001

 Tagged ports:   None

 Untagged ports:

    FortyGigE1/0/2

# Append the VLAN 999 settings to the end of file vlan.txt.

<Sysname> display vlan 999 >> vlan.txt

# Verify whether the VLAN 999 settings are appended to the end of file vlan.txt.

<Sysname> more vlan.txt

VLAN ID: 1

 VLAN type: Static

 Route interface: Not configured

 Description: VLAN 0001

 Name: VLAN 0001

 Tagged ports:   None

 Untagged ports:

    FortyGigE1/0/2

 

 VLAN ID: 999

 VLAN type: Static

 Route interface: Configured

 IP address: 192.168.2.1

 Subnet mask: 255.255.255.0

 Description: For LAN Access

 Name: VLAN 0999

 Tagged ports:   None

 Untagged ports:

    FortyGigE1/0/1

Viewing and managing the output from a display command effectively

You can use the following measures in combination to filter and manage the output from a display command:

·          Numbering each output line from a display command

·          Filtering the output from a display command

·          Saving the output from a display command to a file

To use multiple measures to view and manage the output from a display command effectively, execute the following command in any view:

 

Task	Command
View and manage the output from a display command effectively.	display command [ | [ by-linenum ] { begin | exclude | include } regular-expression ] [ > filename | >> filename ]

 

For example:

# Save the running configuration to a separate file named test.txt, with each line numbered.

<Sysname> display current-configuration | by-linenum > test.txt

# Append lines including "snmp" in the running configuration to the file test.txt.

<Sysname> display current-configuration | include snmp >> test.txt

# Display the first line that begins with "user-group" in the running configuration and all the following lines.

<Sysname> display current-configuration | by-linenum begin user-group

  114:  user-group system

  115-  #

  116-  return

Saving the running configuration

To make your configuration take effect after a reboot, save the running configuration to a configuration file by using the save command in any view. This command saves all commands that have been successfully executed, except for the one-time commands. Typical one-time commands include display commands used for displaying information and reset commands used for clearing information.

For more information about the save command, see Fundamentals Command Reference.