Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 01-Harware Information and Specifications | 1.19 MB |
1 Product models and technical specifications
10/100BASE-T autosensing Ethernet port
10/100/1000BASE-T autosensing Ethernet port
10/100BASE-T and 10/100/1000BASE-T autosensing Ethernet port LEDs
1 Product models and technical specifications
Product models
This document is applicable to the S3100V3-EI switch series. Table1-1 describes the S3100V3-EI switch series models.
Table1-1 S3100V3-EI switch series models
|
Switch model |
Product code (PID) |
|
S3100V3-10TP-EI |
LS-3100V3-10TP-EI LS-3100V3-10TP-EI-GL LS-3100V3-10TP-EI-H1 |
|
S3100V3-18TP-EI |
LS-3100V3-18TP-EI LS-3100V3-18TP-EI-GL LS-3100V3-18TP-EI-H1 |
|
S3100V3-18TP-EI-DC |
LS-S3100V3-18TP-EI-DC |
|
S3100V3-28TP-EI |
LS-3100V3-28TP-EI LS-3100V3-28TP-EI-GL LS-3100V3-28TP-EI-H1 LS-3100V3-28TP-EI-T |
|
S3100V3-28TP-EI-DC |
LS-S3100V3-28TP-EI-DC |
|
S3100V3-52TP-EI |
LS-3100V3-52TP-EI LS-3100V3-52TP-EI-GL LS-3100V3-52TP-EI-H1 |
|
S3100V3-10TP-PWR-EI |
LS-3100V3-10TP-PWR-EI LS-3100V3-10TP-PWR-EI-GL LS-3100V3-10TP-PWR-EI-H1 |
|
S3100V3-20TP-PWR-EI |
LS-3100V3-20TP-PWR-EI LS-3100V3-20TP-PWR-EI-GL LS-3100V3-20TP-PWR-EI-H1 |
|
S3100V3-20TP-PWR-EI-DC |
LS-S3100V3-20TP-PWR-EI-DC |
|
S3100V3-28TP-PWR-EI |
LS-3100V3-28TP-PWR-EI LS-3100V3-28TP-PWR-EI-GL |
|
S3100V3-28TP-PWR-EI-AC |
LS-3100V3-28TP-PWR-EI-AC |
|
|
NOTE: Switches of the same model but different PIDs might differ in hardware and software features. You can view the PID of a switch on the label located on its rear panel or top panel. |
Technical specifications
Non-PoE switch models
Table1-2 Technical specifications for non-PoE switch models (1)
|
Item |
S3100V3-10TP-EI |
S3100V3-18TP-EI |
S3100V3-18TP-EI-DC |
|
Dimensions (H × W × D) |
43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in) |
43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in) |
43.6 × 266 × 161 mm (1.72 × 10.47 × 6.34 in) |
|
Weight |
≤ 1.5 kg (3.31 lb) |
≤ 1.5 kg (3.31 lb) |
≤ 1.5 kg (3.31 lb) |
|
Console port |
1 × serial console port |
1 × serial console port |
1 × serial console port |
|
10/100BASE-T autosensing Ethernet port |
4 |
8 |
8 |
|
10/100/1000BASE-T autosensing Ethernet port |
4 |
8 |
8 |
|
SFP port |
2 |
2 |
2 |
|
Input voltage |
· AC input (not supported by the S3100V3-18TP-EI-DC switch) ¡ Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz ¡ Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz · DC input from a –48 VDC power source in the equipment room or an H3C RPS1600-A (supported only by the S3100V3-18TP-EI-DC switch) ¡ Rated voltage: –48 VDC to –60 VDC ¡ Max voltage: –36 VDC to –72 VDC |
||
|
Minimum power consumption |
Models with product code LS-3100V3-10TP-EI: 6.5 W Models with product code S3100V3-10TP-EI-H1: 8 W |
7 W |
19 W |
|
Maximum power consumption |
Models with product code LS-3100V3-10TP-EI: 11 W Models with product code S3100V3-10TP-EI-H1: 14 W |
15 W |
25 W |
|
Chassis leakage current compliance |
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1 |
||
|
Melting current of power module fuse |
2 A/250 V |
2 A/250 V |
3.15 A/250 V |
|
Cooling system |
Natural cooling without fan trays |
Natural cooling without fan trays |
Natural cooling without fan trays |
|
Operating temperature |
–5°C to +45°C (23°F to 113°F) |
||
|
Operating humidity |
5% to 95%, noncondensing |
||
|
Fire resistance compliance |
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1 |
||
Table1-3 Technical specifications for non-PoE switch models (2)
|
Item |
S3100V3-28TP-EI |
S3100V3-28TP-EI-DC |
S3100V3-52TP-EI |
|
|
Dimensions (H × W × D) |
43.6 × 440 × 160 mm (1.72 × 17.32 × 6.30 in) |
43.6 × 440 × 160 mm (1.72 × 17.32 × 6.30 in) |
43.6 × 440 × 230 mm (1.72 × 17.32 × 9.06 in) |
|
|
Weight |
≤ 2.5 kg (5.51 lb) |
≤ 2.5 kg (5.51 lb) |
≤ 3.5 kg (7.72 lb) |
|
|
Console port |
1 × serial console port |
1 × serial console port |
1 × serial console port |
|
|
10/100BASE-T autosensing Ethernet port |
16 |
16 |
32 |
|
|
10/100/1000BASE-T autosensing Ethernet port |
8 |
8 |
16 |
|
|
SFP port |
4 |
4 |
4 |
|
|
Input voltage |
· AC input (not supported by the S3100V3-28TP-EI-DC switch) · Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz · Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz · DC input from a –48 VDC power source in the equipment room or an H3C RPS1600-A (supported only by the S3100V3-28TP-EI-DC switch) ¡ Rated voltage: –48 VDC to –60 VDC ¡ Max voltage: –36 VDC to –72 VDC |
|||
|
Minimum power consumption |
9 W |
20 W |
18 W |
|
|
Maximum power consumption |
19 W |
27 W |
33 W |
|
|
Chassis leakage current compliance |
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1 |
|||
|
Melting current of power module fuse |
2 A/250 V |
3.15 A/125 V |
3.15 A/250 V |
|
|
Cooling system |
Natural cooling without fan trays |
Natural cooling without fan trays |
Using fixed fan trays to draw ambient air in from the left side and right side and exhaust heated air from the power module side |
|
|
Operating temperature |
–5°C to +45°C (23°F to 113°F) |
|||
|
Operating humidity |
5% to 95%, noncondensing |
|||
|
Fire resistance compliance |
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1 |
|||
PoE switch models
Table1-4 Technical specifications for PoE switch models
|
Item |
S3100V3-10TP-PWR-EI |
S3100V3-20TP-PWR-EI |
S3100V3-20TP-PWR-EI-DC |
S3100V3-28TP-PWR-EI |
S3100V3-28TP-PWR-EI-AC |
|||
|
Dimensions (H × W × D) |
43.6 × 330 × 230 mm (1.72 × 12.99 × 9.06 in) |
43.6 × 330 × 230 mm (1.72 × 12.99 × 9.06 in) |
43.6 × 330 × 230 mm (1.72 × 12.99 × 9.06 in) |
43.6 × 440 × 260 mm (1.72 × 17.32 × 10.24 in) |
43.6 × 440 × 260 mm (1.72 × 17.32 × 10.24 in) |
|||
|
Weight |
≤ 3 kg (6.61 lb) |
≤ 3 kg (6.61 lb) |
≤ 2.5 kg (5.51 lb) |
≤ 4.5 kg (9.92 lb) |
≤ 4.5 kg (9.92 lb) |
|||
|
Console port |
1 × serial console port |
1 × serial console port |
1 × serial console port |
1 × serial console port |
1 × serial console port |
|||
|
10/100BASE-T autosensing Ethernet port |
4 |
8 |
8 |
16 |
16 |
|||
|
10/100/1000BASE-T autosensing Ethernet port |
4 |
8 |
8 |
12 (The rightmost four 10/100/1000BASE-T autosensing Ethernet ports each form a combo interface with its corresponding SFP port.) |
12 (The rightmost four 10/100/1000BASE-T autosensing Ethernet ports each form a combo interface with its corresponding SFP port.) |
|||
|
SFP port |
2 |
4 |
4 |
4 (Each and its corresponding 10/100/1000BASE-T autosensing Ethernet port form a combo interface.) |
4 (Each and its corresponding 10/100/1000BASE-T autosensing Ethernet port form a combo interface.) |
|||
|
Input voltage |
· AC input (not supported by an S3100V3-20TP-PWR-EI-DC switch): ¡ Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz ¡ Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz · H3C RPS1600-A input (supported only by an S3100V3-28TP-PWR-EI switch) ¡ Rated voltage: –54 VDC to –57 VDC ¡ Max voltage: · DC input from a DC power supply system or an H3C RPS1600-A (supported only by an S3100V3-20TP-PWR-EI-DC switch): ¡ Rated voltage: –52 VDC to –57 VDC ¡ Max voltage: –44 VDC to –60 VDC |
|||||||
|
Maximum PoE power per port |
30 W |
30 W |
30 W |
30 W The combo copper ports do not support PoE power output. |
30 W |
|||
|
Total PoE power |
125 W |
185 W |
185 W |
AC: 370 W DC: 740 W |
370 W |
|||
|
Minimum power consumption |
13 W |
Models with product code LS-3100V3-20TP-PWR-EI: 18 W Models with product code LS-3100V3-20TP-PWR-EI-H1: 15 W |
21 W |
AC: 23 W DC: 16 W |
15 W |
|||
|
Maximum power consumption (including PoE power consumption) |
150 W |
Models with product code LS-3100V3-20TP-PWR-EI: 220 W Models with product code LS-3100V3-20TP-PWR-EI-H1: 235 W |
220 W |
AC: 439 W DC: 788 W |
443 W |
|||
|
Chassis leakage current compliance |
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1 |
|||||||
|
Melting current of power module fuse |
6.3 A/250 V |
6.3 A/250 V |
3.15 A/125 V |
15 A/250 V |
15 A/250 V |
|||
|
Cooling system |
Natural cooling without fan trays |
Using fixed fan trays to draw ambient air in from the left side and exhaust heated air from the right side |
Using fixed fan trays to draw ambient air in from the left side and exhaust heated air from the right side |
Using fixed fan trays to draw ambient air in from the left side and the port side and exhaust heated air from the right side |
Using fixed fan trays to draw ambient air in from the left side and the port side and exhaust heated air from the right side |
|||
|
Operating temperature |
–5°C to +45°C (23°F to 113°F) |
|||||||
|
Operating humidity |
5% to 95%, noncondensing |
|||||||
|
Fire resistance compliance |
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1 |
|||||||
2 Chassis views
S3100V3-10TP-EI
Figure2-1 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
(4) SFP port LED |
|
(5) System status LED (SYS) |
|
|
(6) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(7) Console port |
(8) SFP port |
Figure2-2 Rear panel
|
(1) Grounding screw |
(2) AC-input power receptacle |
S3100V3-18TP-EI
Figure2-3 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
|
|
(4) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(5) SFP port LED |
(6) System status LED (SYS) |
|
(7) Console port |
(8) SFP port |
Figure2-4 Rear panel
|
(1) Grounding screw |
(2) AC-input power receptacle |
S3100V3-18TP-EI-DC
Figure2-5 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
|
|
(4) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(5) SFP port LED |
(6) System status LED (SYS) |
|
(7) Console port |
(8) SFP port |
Figure2-6 Rear panel
|
(1) DC-input power receptacle |
(2) Grounding screw |
S3100V3-28TP-EI
Figure2-7 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
|
|
(4) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(5) SFP port LED |
(6) System status LED (SYS) |
|
(7) Console port |
(8) SFP port |
Figure2-8 Rear panel
|
(1) Grounding screw |
(2) AC-input power receptacle |
S3100V3-28TP-EI-DC
Figure2-9 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
|
|
(4) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(5) SFP port LED |
(6) System status LED (SYS) |
|
(7) Console port |
(8) SFP port |
Figure2-10 Rear panel
|
(1) Grounding screw |
(2) DC-input power receptacle |
S3100V3-52TP-EI
Figure2-11 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100BASE-T autosensing Ethernet port LED |
|
(3) 10/100/1000BASE-T autosensing Ethernet port |
|
|
(4) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(5) Console port |
(6) System status LED (SYS) |
|
(7) SFP port |
(8) SFP port LED |
Figure2-12 Rear panel
|
(1) Grounding screw |
(2) AC-input power receptacle |
S3100V3-10TP-PWR-EI
Figure2-13 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
(4) SFP port LED |
|
(5) System status LED (SYS) |
(6) Mode LED (MODE) |
|
(7) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(8) Port LED mode switching button |
|
|
(9) Console port |
(10) SFP port |
Figure2-14 Rear panel
|
(1) AC-input power receptacle |
(2) Grounding screw |
S3100V3-20TP-PWR-EI
Figure2-15 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
|
|
(4) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(5) SFP port LED |
(6) System status LED (SYS) |
|
(7) Mode LED (MODE) |
(8) Port LED mode switching button |
|
(9) Console port |
(10) SFP port |
Figure2-16 Rear panel
|
(1) AC-input power receptacle |
(2) Grounding screw |
S3100V3-20TP-PWR-EI-DC
Figure2-17 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
|
|
(4) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(5) SFP port LED |
(6) System status LED (SYS) |
|
(7) Mode LED (MODE) |
(8) Port LED mode switching button |
|
(9) Console port |
(10) SFP port |
Figure2-18 Rear panel
|
(1) DC-input power receptacle |
(2) Grounding screw |
S3100V3-28TP-PWR-EI
Figure2-19 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
(3) 10/100BASE-T autosensing Ethernet port LED |
(4) System status LED (SYS) |
|
(5) RPS status LED (RPS) |
(6) Mode LED (MODE) |
|
(7) SFP port LED |
|
|
(8) 10/100/1000BASE-T autosensing Ethernet port LED |
|
|
(9) Port LED mode switching button |
(10) Console port |
|
(11) SFP port |
|
Figure2-20 Rear panel
|
(1) Grounding screw |
(2) AC-input power receptacle |
|
(3) DC-input power receptacle |
|
S3100V3-28TP-PWR-EI-AC
Figure2-21 Front panel
|
(1) 10/100BASE-T autosensing Ethernet port |
(2) 10/100/1000BASE-T autosensing Ethernet port |
|
|
(3) 10/100BASE-T autosensing Ethernet port LED |
(4) System status LED (SYS) |
|
|
(5) Mode LED (MODE) |
(6) SFP port LED |
|
|
(7) 10/100/1000BASE-T autosensing Ethernet port LED |
||
|
(8) Port LED mode switching button |
(9) Console port |
|
|
(10) SFP port |
||
Figure2-22 Rear panel
|
(1) Grounding screw |
(2) AC-input power receptacle |
3 Ports and LEDs
Ports
Console port
Table3-1 Console port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Compliant standard |
EIA/TIA-232 |
|
Transmission baud rate |
9600 bps (default) to 115200 bps |
|
Services |
· Provides connection to an ASCII terminal. · Provides connection to the serial port of a local PC running terminal emulation program. |
10/100BASE-T autosensing Ethernet port
Table3-2 10/100BASE-T autosensing Ethernet port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Interface attributes |
· 10 Mbps, half/full duplex · 100 Mbps, half/full duplex · MDI/MDI-X autosensing |
|
Max transmission distance |
100 m (328.08 ft) |
|
Transmission medium |
Category-5 (or above) twisted pair cable |
|
Compatible standards |
· IEEE 802.3i · 802.3u · 802.3ab |
10/100/1000BASE-T autosensing Ethernet port
Table3-3 10/100/1000BASE-T autosensing Ethernet port specifications
|
Item |
Specification |
|
Connector type |
RJ-45 |
|
Interface attributes |
· 10 Mbps, half/full duplex · 100 Mbps, half/full duplex · 1000 Mbps, full duplex · MDI/MDI-X autosensing |
|
Max transmission distance |
100 m (328.08 ft) |
|
Transmission medium |
Category-5 (or above) twisted pair cable |
|
Compatible standards |
· IEEE 802.3i · 802.3u · 802.3ab |
SFP port
The S3100V3-EI switches provide SFP ports. SFP transceiver modules and cables available for the SFP ports vary by switch model, as shown in Table3-4.
Table3-4 SFP transceiver modules and cables available for the switches
|
Switch model |
Available SFP transceiver modules and cables |
Restrictions |
|
S3100V3-10TP-EI S3100V3-18TP-EI S3100V3-18TP-EI-DC S3100V3-10TP-PWR-EI S3100V3-28TP-EI S3100V3-28TP-EI-DC |
GE SFP transceiver modules and cables in Table3-5 |
To use transceiver modules with the maximum transmission distance greater than or equal to 80 km (49.71 miles), make sure the operating temperature is lower than or equal to 40°C (104°F). |
|
S3100V3-52TP-EI S3100V3-20TP-PWR-EI S3100V3-20TP-PWR-EI-DC |
N/A |
|
|
S3100V3-28TP-PWR-EI S3100V3-28TP-PWR-EI-AC |
GE SFP transceiver modules and cables in Table3-5 and FE SFP transceiver modules in Table3-6 |
N/A |
Table3-5 GE SFP transceiver modules and cables available for the SFP ports
|
GE SFP transceiver module and cable |
Central wavelength (nm) |
Connector |
Cable/Fiber type and diameter (µm) |
Modal bandwidth (MHz × km) |
Max transmission distance |
|
SFP copper transceiver module |
|||||
|
SFP-GE-T |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP-GE-T-D |
N/A |
RJ-45 |
Twisted pair cable |
N/A |
100 m (328.08 ft) |
|
SFP fiber transceiver module |
|||||
|
SFP-GE-SX-MM850-A |
850 |
LC |
Multi-mode, 50/125 |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
||||
|
Multi-mode, 62.5/125 |
200 |
275 m (902.23 ft) |
|||
|
160 |
220 m (721.78 ft) |
||||
|
SFP-GE-SX-MM850-D |
850 |
LC |
Multi-mode, 50/125 |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
||||
|
Multi-mode, 62.5/125 |
200 |
275 m (902.23 ft) |
|||
|
160 |
220 m (721.78 ft) |
||||
|
SFP-GE-SX-MM850-S |
850 |
LC |
Multi-mode, 50/125 |
500 |
550 m (1804.46 ft) |
|
400 |
500 m (1640.42 ft) |
||||
|
Multi-mode, 62.5/125 |
200 |
275 m (902.23 ft) |
|||
|
160 |
220 m (721.78 ft) |
||||
|
SFP-GE-LX-SM1310-A |
1310 |
LC |
Single-mode, 9/125 |
N/A |
10 km (6.21 miles) |
|
Multi-mode, 50/125 |
500 or 400 |
550 m (1804.46 ft) |
|||
|
Multi-mode, 62.5/125 |
500 |
550 m (1804.46 ft) |
|||
|
SFP-GE-LX-SM1310-D |
1310 |
LC |
Single-mode, 9/125 |
N/A |
10 km (6.21 miles) |
|
SFP-GE-LX-SM1310-S |
1310 |
LC |
Single-mode, 9/125 |
N/A |
10 km (6.21 miles) |
|
SFP-GE-LH40-SM1310 |
1310 |
LC |
Single-mode, 9/125 |
N/A |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1310-D |
1310 |
LC |
Single-mode, 9/125 |
N/A |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1550 |
1550 |
LC |
Single-mode, 9/125 |
N/A |
40 km (24.86 miles) |
|
SFP-GE-LH80-SM1550 |
1550 |
LC |
Single-mode, 9/125 |
N/A |
80 km (49.71 miles) |
|
SFP-GE-LH80-SM1550-D |
1550 |
LC |
Single-mode, 9/125 |
N/A |
80 km (49.71 miles) |
|
SFP-GE-LH100-SM1550 |
1550 |
LC |
Single-mode, 9/125 |
N/A |
100 km (62.14 miles) |
|
SFP-GE-LX-SM1310-BIDI |
TX: 1310 RX: 1490 |
LC |
Single-mode, 9/125 |
N/A |
10 km (6.21 miles) |
|
SFP-GE-LX-SM1490-BIDI |
TX: 1490 RX: 1310 |
LC |
Single-mode, 9/125 |
N/A |
10 km (6.21 miles) |
|
SFP-GE-LH40-SM1310-BIDI |
TX: 1310 RX: 1550 |
LC |
Single-mode, 9/125 |
N/A |
40 km (24.86 miles) |
|
SFP-GE-LH40-SM1550-BIDI |
TX: 1550 RX: 1310 |
LC |
Single-mode, 9/125 |
N/A |
40 km (24.86 miles) |
|
SFP-GE-LH70-SM1490-BIDI |
TX: 1490 RX: 1550 |
LC |
Single-mode, 9/125 |
N/A |
70 mm (2.76 in) |
|
SFP-GE-LH70-SM1550-BIDI |
TX: 1550 RX: 1490 |
LC |
Single-mode, 9/125 |
N/A |
70 mm (2.76 in) |
|
SFP cable |
|||||
|
SFP-STACK-Kit |
N/A |
1.5 m (4.92 ft) |
|||
|
|
IMPORTANT: The SFP-GE-LX-SM1310-BIDI and SFP-GE-LX-SM1490-BIDI transceiver modules, the SFP-GE-LH40-SM1310-BIDI and SFP-GE-LH40-SM1550-BIDI transceiver modules, and the SFP-GE-LH70-SM1490-BIDI and SFP-GE-LH70-SM1550-BIDI transceiver modules must be used in pairs. For example, if one end uses an SFP-GE-LX-SM1310-BIDI transceiver module, the other end must use an SFP-GE-LX-SM1490-BIDI transceiver module. |
Table3-6 FE SFP transceiver modules
|
FE SFP transceiver module |
Central wavelength |
Connector |
Fiber |
Max transmission distance |
|
|
SFP-FE-SX-MM1310-A |
1310 nm |
LC |
· 50/125 µm, multimode · 62.5/125 µm, multimode |
2 km (1.24 miles) |
|
|
SFP-FE-LX-SM1310-A |
1310 nm |
LC |
9/125 µm, single mode |
15 km (9.32 miles) |
|
|
SFP-FE-LX-SM1310-D |
1310 nm |
LC |
9/125 µm, single mode |
15 km (9.32 miles) |
|
|
SFP-FE-LH40-SM1310 |
1310 nm |
LC |
9/125 µm, single mode |
40 km (24.86 miles) |
|
|
SFP-FE-LH80-SM1550 |
1550 nm |
LC |
9/125 µm, single mode |
80 km (49.71 miles) |
|
|
SFP-FE-LX-SM1310-BIDI |
You must use these two transceiver modules in pairs. |
· TX: 1310 nm · RX: 1550 nm |
LC |
9/125 µm, single mode |
15 km (9.32 miles) |
|
SFP-FE-LX-SM1550-BIDI |
· TX: 1550 nm · RX: 1310 nm |
LC |
|||
|
|
NOTE: · As a best practice, use H3C SFP transceiver modules and cables for the SFP ports. · The H3C SFP transceiver modules and cables available for the SFP ports are subject to change over time. For the most up-to-date list of H3C SFP transceiver modules and cables available for the SFP ports, contact your H3C sales representative or technical support engineer. · For the specifications for the H3C SFP transceiver modules and cables, see H3C Transceiver Modules User Guide. |
Combo interface
The S3100V3-28TP-PWR-EI and S3100V3-28TP-PWR-EI-AC switches each provide four combo interfaces. Each combo interface contains an SFP port and a 10/100/1000BASE-T autosensing Ethernet port. Only one of these two ports can operate at a time.
LEDs
System status LED
The system status LED shows the operating status of the switch.
Table3-7 System status LED description
|
LED mark |
Status |
Description |
|
SYS |
Steady yellow |
Boot ROM booting stage. |
|
Steady green |
Linux kernel booting stage, or the switch has started up correctly. |
|
|
Flashing green (1 Hz) |
Software image loading and decompressing stage, or software booting stage. |
|
|
Steady red |
The switch has failed POST or the switch is faulty. |
|
|
Off |
The switch is powered off or has not started up correctly. |
RPS status LED
The S3100V3-28TP-PWR-EI switch supports RPS input and provides an RPS status LED on the front panel to indicate the RPS operating status.
Table3-8 RPS status LED description
|
LED mark |
Status |
Description |
|
RPS |
Steady green |
Both the RPS DC input and the AC input are normal. |
|
Steady yellow |
The RPS DC input is normal, but the AC input is disconnected or has failed. |
|
|
Off |
The RPS DC input has failed, or no RPS is connected. |
Mode LED (MODE)
The S3100V3-EI PoE switches each provide a mode LED (MODE). The mode LED works in conjunction with the 10/100BASE-T or 10/100/1000BASE-T autosensing Ethernet port LEDs to indicate the operating state of the autosensing Ethernet ports and the switch.
You can use the LED mode switching button to change the indication of the mode LED.
Table3-9 Description for the mode LED
|
LED mark |
Status |
Description |
|
Mode LED (MODE) |
Steady green |
The autosensing Ethernet port LEDs are showing link state of the ports. |
|
Flashing green (available only for PoE switches) |
The autosensing Ethernet port LEDs are showing the PoE status of the ports. |
|
|
Flashing yellow |
The autosensing Ethernet port LEDs work in conjunction to indicate the IRF member ID of the switch. For example, if the LED for port 5 is steady green, the IRF member ID of the switch is 5. |
SFP port LED
Table3-10 SFP port LED description
|
Status |
Description |
|
Steady green |
A link is present on the port. |
|
Flashing green |
The port is sending or receiving data. |
|
Off |
· No link is present on the port. · The mode LED is operating in PoE mode (available only for PoE switch models) |
10/100BASE-T and 10/100/1000BASE-T autosensing Ethernet port LEDs
· On the S3100V3-EI PoE switches, the 10/100BASE-T and 10/100/1000BASE-T autosensing Ethernet port LEDs work in conjunction with the mode LED to indicate the operating state of the autosensing Ethernet ports and the switch from different aspects.
Table3-11 10/100BASE-T and 10/100/1000BASE-T autosensing Ethernet port LED description
|
Mode LED status |
Ethernet port LED status |
Description |
|
Steady green (Link/Active mode) |
Steady green |
A link is present on the port. |
|
Flashing green |
The port is sending or receiving data. |
|
|
Off |
No link is present on the port. |
|
|
Flashing green (PoE mode, available only for PoE switches) |
Steady green |
PoE power supply is normal. |
|
Flashing green (1 Hz) |
· The maximum PoE power provided by the port fails to meet the power requirement of the PD. · PoE power supply overcurrent, overvoltage, or short-circuit occurs. · The remaining power of the switch fails to meet the power supply requirement of the port. |
|
|
Off |
The port is not connected to a PD or PoE is not enabled on the port. |
|
|
Flashing yellow (IRF mode) |
Steady green |
The autosensing Ethernet port LEDs on the switch work in conjunction to indicate the IRF member ID of the switch. For example, if the LED for port 5 is steady green and the other port LEDs are off, the IRF member ID of the switch is 5. |
· The S3100V3-EI non-PoE switches do not have a mode LED. Table3-12 describes the 10/100BASE-T and 10/100/1000BASE-T autosensing Ethernet ports LEDs on these switches.
Table3-12 10/100BASE-T and 10/100/1000BASE-T autosensing Ethernet port LED description
|
LED status |
Description |
|
Steady green |
A link is present on the port. |
|
Flashing green |
The port is sending or receiving data. |
|
Off |
No link is present on the port. |
