- Table of Contents
-
- 01-Fundamentals Command Reference
- 00-Preface
- 01-CLI commands
- 02-RBAC commands
- 03-Login management commands
- 04-FTP and TFTP commands
- 05-File system management commands
- 06-Configuration file management commands
- 07-Software upgrade commands
- 08-Preprovisioning commands
- 09-Device management commands
- 10-Tcl commands
- 11-Python commands
- 12-GIR commands
- Related Documents
-
Title | Size | Download |
---|---|---|
08-Preprovisioning commands | 50.25 KB |
Preprovisioning commands
display provision failed-config
Use display provision failed-config to display preprovisioned-commands application failure records.
Syntax
display provision failed-config
Views
Any view
Predefined user roles
network-admin
network-operator
A preprovisioned command cannot be applied if it conflicts with the running configuration.
Use this command to verify the application result of preprovisioned commands except for the following commands:
· duplex
· speed
· sflow
To verify the application result of the listed commands, use the display current-configuration command. The display provision failed-config command might display incorrect application results for the listed commands.
Examples
# Display preprovisioned-commands application failure records.
<Sysname> display provision failed-config
Configuration applied at: Sat Jun 14 06:06:00 2014
Slot information: slot 1
Commands that failed to be applied:
#
interface HundredGigE 1/1/1
speed 100000
#
Related commands
provision
reset provision failed-config
provision
Use provision to enable preprovisioning.
Use undo provision to disable preprovisioning.
Syntax
provision subslot subslot-number model model
undo provision subslot subslot-number model
Default
Preprovisioning is disabled.
Views
Slot view
Predefined user roles
network-admin
Parameters
subslot subslot-number: Specifies a subslot by its subslot number.
model model: Specifies the subcard model to be preprovisioned. To obtain available models, enter a question mark (?) for the model argument.
Usage guidelines
CAUTION: When you disable preprovisioning on a subslot, the device removes preconfigured settings for the subslot. |
This command allows you to enable preprovisioning on offline modules, including subcards.
The device automatically creates interfaces when preprovisioning is enabled for a module. The display interface command will not display these interfaces until the module comes online.
Examples
# Enable preprovisioning for the LSW1D16H subcard on a slot.
<Sysname> system-view
[Sysname] slot 1
[Sysname-slot-1] provision subslot 1 model LSW1D16H
Related commands
display provision failed-config
reset provision failed-config
slot
reset provision failed-config
Use reset provision failed-config to clear preprovisioned-commands application failure records.
Syntax
reset provision failed-config
Views
User view
Predefined user roles
network-admin
Usage guidelines
Preprovisioned modules that repeatedly come online and go offline might leave in memory a large number of commands that were not applied. To release the occupied memory space, execute the reset provision failed-config command.
Examples
# Clear preprovisioned-commands application failure records.
<Sysname> reset provision failed-config
Related commands
display provision failed-config
provision
slot
Use slot to select a slot to provision and enter slot view.
Syntax
slot slot-number
Views
System view
Predefined user roles
network-admin
Parameters
slot-number: Specifies the slot number of the device, which is fixed at 1.
Examples
# Enter the view of a slot.
<Sysname> system-view
[Sysname] slot 1
[Sysname-slot-1]
Related commands
provision