vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. To display dynamic IPv4SG bindings for the public network, do not specify a VPN instance.

arp-snooping-vlan: Specifies IPv4SG bindings generated based on ARP snooping for VLANs.

arp-snooping-vsi: Specifies IPv4SG bindings generated based on ARP snooping for VSIs.

dhcp-relay: Specifies IPv4SG bindings generated based on DHCP relay agent.

dhcp-server: Specifies IPv4SG bindings generated based on DHCP server.

dhcp-snooping: Specifies IPv4SG bindings generated based on DHCP snooping.

dot1x: Specifies IPv4SG bindings generated based on 802.1X. To display dynamic IPv4SG bindings generated based on the 802.1X module, you must also specify the slot through which 802.1X users access the network.

remote: Specifies remote IPv4SG bindings synchronized by routing protocols.

ip-address ip-address: Specifies an IPv4 address.

mac-address mac-address: Specifies a MAC address in H-H-H format.

vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094.

interface interface-type interface-number: Specifies an interface by its type and number.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays IPv4SG bindings for the master device.

Examples

# Display all IPSG bindings on the public network.

<Sysname> display ip source binding

Total entries found: 5

IP Address MAC Address Interface VLAN Type

10.1.0.5 040a-0000-4000 WGE1/0/1 1 DHCP snooping

10.1.0.6 040a-0000-3000 WGE1/0/1 1 DHCP snooping

10.1.0.7 040a-0000-2000 WGE1/0/1 1 DHCP snooping

10.1.0.8 040a-0000-1000 WGE1/0/2 N/A DHCP relay

10.1.0.9 040a-0000-2000 WGE1/0/2 N/A Static

Table 1 Command output

Field	Description
Total entries found	Total number of IPv4SG bindings.
IP Address	IPv4 address in the IPv4SG binding. If no IP address is bound in the binding, this field displays N/A.
MAC Address	MAC address in the IPv4SG binding. If no MAC address is bound in the binding, this field displays N/A.
Interface	Interface of the binding. This field displays N/A for a global IPv4SG binding.
VLAN	VLAN information in the IPv4SG binding. If the binding contains no VLAN information, this field displays N/A.
Type	IPSG binding type: · Static—Manually configured by using the ip source binding command. Static bindings are for packet filtering in IPSG or used by other modules to provide security services. · ARP snooping vlan—Dynamically generated based on ARP snooping for the VLAN. The binding is for packet filtering in IPSG. · ARP snooping vsi—Dynamically generated based on ARP snooping for the VSI. The binding is for packet filtering in IPSG. · 802.1X—Dynamically generated based on 802.1X. The binding is for packet filtering in IPSG. · DHCP relay—Dynamically generated based on DHCP relay agent. The binding is for packet filtering in IPSG. · DHCP server—Dynamically generated based on DHCP server. The binding is used by other modules to provide security services. · DHCP snooping—Dynamically generated based on DHCP snooping. The binding is for packet filtering in IPSG. · Remote—Synchronized by routing protocols from a remote device. The binding is used by ARP attack protection to provide security services.

Related commands

ip source binding

ip verify source

display ip source binding-local

Use display ip source binding-local to display local IPv4SG bindings that can be synchronized by routing protocols.

Syntax

display ip source binding-local [ interface interface-type interface-number ] [ dhcp-relay ] [ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number.

dhcp-relay: Specifies dynamic IPv4SG bindings generated based on the DHCP relay module.

ip-address ip-address: Specifies an IP address.

mac-address mac-address: Specifies a MAC address, in the H-H-H format.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays local IPv4SG bindings that can be synchronized by routing protocols on the master device.

Usage guidelines

If you do not specify any parameters, this command displays all local IPv4SG bindings that can be synchronized by routing protocols.

Examples

# Display local IPv4SG bindings that can be synchronized by routing protocols.

<Sysname> display ip source binding-local

Total entries found: 1

IP address MAC address Interface VLAN Type

10.1.0.5 040a-0000-4000 Vlan1 1 DHCP relay

Table 2 Command output

Field	Description
Total entries found	Number of matching local IPv4SG bindings that can be synchronized by routing protocols.
IP address	IPv4 address in the IPv4SG binding. If no IP address is bound in the binding, this field displays N/A.
MAC address	MAC address in the IPv4SG binding. If no MAC address is bound in the binding, this field displays N/A.
Interface	Interface in the binding. This field displays N/A for a global IPv4SG binding.
VLAN	VLAN information in the IPv4SG binding. If the binding contains no VLAN information, this field displays N/A.
Type	Type of the IPv4SG binding. DHCP relay indicates that this binding was dynamically generated based on DHCP relay agent. This binding can be for packet filtering in IPSG.

display ip source binding-remote

Use display ip source binding-remote to display remote IPv4SG bindings synchronized by routing protocols.

Syntax

display ip source binding-remote [ router-id router-id ] [ dhcp-relay ] [ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

router-id router-id: Specifies a remote device from which the device synchronizes IPv4SG bindings. The argument represents the router ID of the remote device, in IP address format.

dhcp-relay: Specifies dynamic IPv4SG bindings generated based on the DHCP relay module.

ip-address ip-address: Specifies an IP address.

mac-address mac-address: Specifies a MAC address, in the H-H-H format.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays remote IPv4SG bindings synchronized by routing protocols on the master device.

Usage guidelines

If you do not specify any parameters, this command displays all remote IPv4SG bindings synchronized by routing protocols.

Examples

# Display remote IPv4SG bindings synchronized by routing protocols.

<Sysname> display ip source binding-remote

Total entries found: 1

IP address MAC address Router ID VLAN Type

10.1.0.5 040a-0000-4000 1.1.1.1 1 DHCP relay

Table 3 Command output

Field	Description
Total entries found	Number of matching remote IPv4SG bindings that were synchronized by routing protocols.
IP address	IPv4 address in the IPv4SG binding. If no IP address is bound in the binding, this field displays N/A.
MAC address	MAC address in the IPv4SG binding. If no MAC address is bound in the binding, this field displays N/A.
Router ID	Interface in the binding. This field displays N/A for a global IPv4SG binding.
VLAN	VLAN information in the IPv4SG binding. If the binding contains no VLAN information, this field displays N/A.
Type	Type of the IPv4SG binding. DHCP relay indicates that this binding was dynamically generated based on DHCP relay agent.

display ip source binding statistics

Use display ip source binding statistics to display statistics about local and remote IPv4SG bindings that routing protocols synchronize.

Syntax

display ip source binding statistics

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

You can use this command to monitor the numbers of local and remote IPv4SG bindings that routing protocols synchronize in realtime. Based on the statistics, you can determine whether the maximum number of IPSG bindings is reached and whether attackers exist on the network.

This command displays the statistics only in the most recent hour.

Examples

# Display statistics about local and remote IPv4SG bindings that routing protocols synchronize.

<Sysname> display ip source binding statistics

Time Local entry count Remote entry count

Current 2000 5200

1 min ago 1351 5135

2 min ago 711 5071

3 min ago 708 4774

...

59 min ago 656 1365

60 min ago 607 1300

Table 4 Command output

Field	Description
Time	Time when the statistics were collected.
Local entry count	Total number of local IPv4SG bindings that can be synchronized by routing protocols.
Remote entry count	Total number of remote IPv4SG bindings that were synchronized by routing protocols.

display ipv6 source binding

Use display ipv6 source binding to display IPv6SG address bindings.

Syntax

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

static: Displays static IPv6SG address bindings.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. To display dynamic IPv6SG address bindings for the public network, do not specify a VPN instance.

dhcpv6-relay: Specifies IPv6SG bindings generated based on DHCPv6 relay agent.

dhcpv6-server: Specifies IPv6SG bindings generated based on DHCPv6 server.

dhcpv6-snooping: Specifies IPv6SG bindings generated based on DHCPv6 snooping.

dot1x: Specifies IPv6SG bindings generated based on 802.1X. To display dynamic IPv6SG address bindings generated based on the 802.1X module, you must also specify the slot through which 802.1X users access the network.

nd-snooping-vlan: Specifies IPv6SG bindings generated based on ND snooping for VLANs.

remote: Specifies remote IPv6SG bindings synchronized by routing protocols.

ip-address ipv6-address: Specifies an IPv6 address.

mac-address mac-address: Specifies a MAC address in H-H-H format.

vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094.

interface interface-type interface-number: Specifies an interface by its type and number.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays IPv6SG address bindings for the master device.

Examples

# Display all IPv6SG address bindings on the public network.

<Sysname> display ipv6 source binding

Total entries found: 2

IPv6 Address MAC Address Interface VLAN Type

2012:1222:2012:1222: 000f-2202-0435 WGE1/0/1 1 DHCPv6 snooping

2012:1222:2012:1222

2012:1222:2012:1222: 000f-2202-0436 WGE1/0/1 N/A Static

2012:1222:2012:1223

Table 5 Command output

Field	Description
Total entries found	Total number of IPv6SG address bindings.
IPv6 Address	IPv6 address in the IPv6SG address binding. If no IPv6 address is bound in the binding, this field displays N/A.
MAC Address	MAC address in the IPv6SG address binding. If no MAC address is bound in the binding, this field displays N/A.
Interface	Interface of the IPv6SG address binding. This field displays N/A for a global IPv6SG binding.
VLAN	VLAN information in the IPv6SG address binding. If the binding contains no VLAN information, this field displays N/A.
Type	Type of the IPv6SG address binding: · Static—Manually configured by using the ipv6 source binding command. Static bindings are for packet filtering in IPv6SG or used by other modules to provide security services. · DHCPv6 relay—Dynamically generated based on DHCPv6 relay agent. The binding is for packet filtering in IPv6SG. · DHCPv6 sever—Dynamically generated based on DHCPv6 server. The binding is reported to the controller for the controller to understand the information about online and offline users. The binding is not for packet filtering. · DHCPv6 snooping—Dynamically generated based on DHCPv6 snooping. The binding is for packet filtering in IPv6SG. · 802.1X—Dynamically generated based on 802.1X. The binding is for packet filtering in IPv6SG. · ND snooping vlan—Dynamically generated based on ND snooping for the VLAN. The binding is for packet filtering in IPv6SG. · Remote—Synchronized by routing protocols from a remote device. The binding is used by ND attack defense to provide security services.

Related commands

ipv6 source binding

ipv6 verify source

display ipv6 source binding-local

Use ipv6 source binding-local to display local IPv6SG bindings that can be synchronized by routing protocols.

Syntax

display ipv6 source binding-local [ interface interface-type interface-number ] [ dhcpv6-relay | nd-snooping-vlan ] [ ip-address ipv6-address ] [ mac-address mac-address ] [ vlan vlan-id ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

interface interface-type interface-number: Specifies an interface by its type and number.

dhcpv6-relay: Specifies dynamic IPv6SG bindings generated based on the DHCPv6 relay module.

nd-snooping-vlan: Specifies dynamic IPv6SG bindings generated based on the ND snooping module for VLANs.

ip-address ipv6-address: Specifies an IPv6 address.

mac-address mac-address: Specifies a MAC address, in the H-H-H format.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays local IPv6SG bindings that can be synchronized by routing protocols on the master device.

Usage guidelines

If you do not specify any parameters, this command displays all local IPv6SG bindings that can be synchronized by routing protocols.

Examples

# Display local IPv6SG bindings that can be synchronized by routing protocols.

<Sysname> display ipv6 source binding-local

Total entries found: 2

IPv6 address MAC address Interface VLAN Type

10::1 040a-0000-1000 WGE1/0/1 2 ND snooping vlan

100::1 04ef-7010-1000 Vlan10 10 DHCPv6 relay

Table 6 Command output

Field	Description
Total entries found	Number of matching local IPv6SG bindings that can be synchronized by routing protocols.
IPv6 address	IPv6 address in the IPv6SG binding. If no IP address is bound in the binding, this field displays N/A.
MAC address	MAC address in the IPv6SG binding. If no MAC address is bound in the binding, this field displays N/A.
Interface	Interface in the binding. This field displays N/A for a global IPv6SG binding.
VLAN	VLAN information in the IPv6SG binding. If the binding contains no VLAN information, this field displays N/A.
Type	Type of the IPv6SG binding. · ND snooping vlan—Dynamically generated based on the ND snooping module for the VLAN. This binding is for packet filtering in IPSG. · DHCP relay—Dynamically generated based on DHCP relay agent. This binding is for packet filtering in IPSG.

display ipv6 source binding-remote

Use display ipv6 source binding-remote to display remote IPv6SG bindings synchronized by routing protocols.

Syntax

display ipv6 source binding-remote [ router-id router-id ] [ dhcpv6-relay | nd-snooping-vlan] [ ip-address ipv6-address ] [ mac-address mac-address ] [ vlan vlan-id ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

router-id router-id: Specifies a remote device from which the device synchronizes IPv6SG bindings. The router-id argument represents the router ID of the remote device, in IP address format.

dhcpv6-relay: Specifies dynamic IPv6SG bindings generated based on the DHCPv6 relay module.

nd-snooping-vlan: Specifies dynamic IPv6SG bindings generated based on the ND snooping module for VLANs.

ip-address ipv6-address: Specifies an IPv6 address.

mac-address mac-address: Specifies a MAC address, in the H-H-H format.

vlan vlan-id: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays remote IPv6SG bindings synchronized by routing protocols on the master device.

Usage guidelines

If you do not specify any parameters, this command displays all remote IPv6SG bindings synchronized by routing protocols.

Examples

# Display remote IPv6SG bindings synchronized by routing protocols.

<Sysname> display ipv6 source binding-remote

Total entries found: 2

IPv6 address MAC address Router ID VLAN Type

10::1 040a-0000-1000 4.4.4.4 2 ND snooping vlan

100::1 04ef-7010-1000 5.5.5.5 10 DHCPv6 relay

Table 7 Command output

Field	Description
Total entries found	Number of matching remote IPv6SG bindings that were synchronized by routing protocols.
IPv6 address	IPv6 address in the IPv6SG binding. If no IP address is bound in the binding, this field displays N/A.
MAC address	MAC address in the IPv6SG binding. If no MAC address is bound in the binding, this field displays N/A.
Router ID	Interface in the binding. This field displays N/A for a global IPv6SG binding.
VLAN	VLAN information in the IPv6SG binding. If the binding contains no VLAN information, this field displays N/A.
Type	Type of the IPv6SG binding. · ND snooping vlan—Dynamically generated based on the ND snooping module for the VLAN. · DHCP relay—Dynamically generated based on DHCP relay agent.

display ipv6 source binding pd

Use display ipv6 source binding pd to display IPv6SG prefix bindings.

Syntax

display ipv6 source binding pd [ vpn-instance vpn-instance-name ] [ prefix prefix/prefix-length ] [ mac-address mac-address ] [ vlan vlan-id ] [ interface interface-type interface-number ] [ slot slot-number ]

Views

Any views

Predefined user roles

network-admin

network-operator

Parameters

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. To display IPv6SG prefix bindings for the public network, do not specify a VPN instance.

prefix prefix/prefix-length: Specifies an IPv6 prefix. The value range for the prefix-length argument is 1 to 128. If you do not specify an IPv6 prefix, this command displays all IPv6SG prefix bindings.

mac-address mac-address: Specifies a MAC address in H-H-H format. If you do not specify a MAC address, this command displays IPv6SG prefix bindings for all MAC addresses.

vlan vlan-id: Specifies a VLAN ID in the range of 1 to 4094. If you do not specify a VLAN, this command displays IPv6SG prefix bindings for all VLANs.

interface interface-type interface-number: Specifies an interface by its type and number. If you do not specify an interface, this command displays IPv6SG prefix bindings for all interfaces.

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member device, this command displays IPv6SG prefix bindings for the master device.

Usage guidelines

IPv6SG prefix bindings are dynamically obtained from the DHCPv6 snooping module.

Examples

# Display all IPv6SG prefix bindings.

<Sysname> display ipv6 source binding pd

Total entries found: 3

IPv6 prefix MAC address Interface VLAN Type

2012:1111::/64 000f-2202-0435 WGE1/0/1 1 DHCPv6 snooping

2012:2222::/64 000f-2202-0436 WGE1/0/2 2 DHCPv6 snooping

Table 8 Command output

Field	Description
Total entries found	Total number of IPv6SG prefix bindings.
IPv6 prefix	IPv6 prefix and prefix length in the IPv6SG prefix binding.
MAC address	MAC address in the IPv6SG prefix binding. This field displays N/A if the MAC address is invalid.
Interface	Interface to which the IPv6SG prefix binding belongs. This field displays N/A for a global IPv6SG prefix binding.
VLAN	VLAN information in the IPv6SG prefix binding. This field displays N/A if the IPv6SG prefix binding does not contain the VLAN information.
Type	Type of the IPv6SG prefix binding: DHCPv6 snooping—The binding is generated based on a DHCPv6 snooping entry.

Related commands

ipv6 source binding

ipv6 verify source

display ipv6 source binding statistics

Use display ipv6 source binding statistics to display statistics about local and remote IPv6SG bindings that routing protocols synchronize.

Syntax

display ipv6 source binding statistics

Views

Any view

Predefined user roles

network-admin

network-operator

Usage guidelines

You can use this command to monitor the numbers of local and remote IPv6SG bindings that routing protocols synchronize in realtime. Based on these statistics, you can determine whether the maximum number of IPSG bindings is reached and whether attackers exist on the network.

This command displays the statistics only in the most recent hour.

Examples

# Display statistics about local and remote IPv6SG bindings that routing protocols synchronize.

<Sysname> display ipv6 source binding statistics

Time Local entry count Remote entry count

Current 2000 5200

1 min ago 1351 5135

2 min ago 711 5071

3 min ago 708 4774

…

59 min ago 656 1365

60 min ago 607 1300

Table 9 Command output

Field	Description
Time	Time when the statistics were collected.
Local entry count	Total number of local IPv6SG bindings that can be synchronized by routing protocols.
Remote entry count	Total number of remote IPv6SG bindings that were synchronized by routing protocols.

ip source binding (interface view)

Use ip source binding to configure a static IPv4SG binding on an interface.

Use undo ip source binding to delete the static IPv4SG bindings configured on an interface.

Syntax

ip source binding { ip-address ip-address | ip-address ip-address mac-address mac-address | mac-address mac-address } [ vlan vlan-id ]

undo ip source binding { all | ip-address ip-address | ip-address ip-address mac-address mac-address | mac-address mac-address } [ vlan vlan-id ]

Default

No static IPv4SG bindings exist on an interface.

Views

Layer 2 Ethernet interface view

Layer 3 Ethernet interface view

Layer 3 Ethernet subinterface view

VLAN interface view

Predefined user roles

network-admin

Parameters

ip-address ip-address: Specifies an IPv4 address for the static binding. The IPv4 address must be a class A, B, or C address, and cannot be 127.x.x.x or 0.0.0.0.

mac-address mac-address: Specifies a MAC address for the static binding. The MAC address must be in H-H-H format, and cannot be all 0s, all Fs (a broadcast MAC address), or a multicast MAC address.

vlan vlan-id: Specifies a VLAN ID for the static binding. The value range is 1 to 4094. This option is supported only in Layer 2 Ethernet interface view.

all: Removes all static IPv4SG bindings on the interface.

Usage guidelines

Static IPv4SG bindings on an interface implement the following functions:

· Filter incoming IPv4 packets on the interface.

· Check user validity by cooperating with the ARP attack detection feature.

You cannot configure static IPv4SG bindings on a service loopback interface.

Examples

# Configure a static IPv4SG binding on Twenty-FiveGigE 1/0/1.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/1

[Sysname-Twenty-FiveGigE1/0/1] ip source binding ip-address 192.168.0.1 mac-address 0001-0001-0001

Related commands

display ip source binding

ip source binding (system view)

Use ip source binding to configure a global static IPv4SG binding.

Use undo ip source binding to delete one or all global static IPv4SG bindings.

Syntax

ip source binding ip-address ip-address mac-address mac-address

undo ip source binding { all | ip-address ip-address mac-address mac-address }

Default

No global static IPv4SG bindings exist.

Views

System view

Predefined user roles

network-admin

Parameters

ip-address ip-address: Specifies the IPv4 address for the static binding. The IPv4 address must be a class A, B, or C address, and cannot be 127.x.x.x or 0.0.0.0.

mac-address mac-address: Specifies the MAC address for the static binding. The MAC address is in the format H-H-H but cannot be all 0s, all Fs (a broadcast MAC address), or a multicast MAC address.

all: Removes all global static IPv4SG bindings.

Usage guidelines

A global static IPv4SG binding takes effect on all interfaces.

Examples

# Configure a global static IPv4SG binding.

<Sysname> system-view

[Sysname] ip source binding ip-address 192.168.0.1 mac-address 0001-0001-0001

Related commands

display ip source binding

ip source binding (interface view)

ip verify source

Use ip verify source to enable IPv4SG on an interface.

Use undo ip verify source to disable IPv4SG on an interface.

Syntax

ip verify source { ip-address | ip-address mac-address | mac-address }

undo ip verify source

Default

The IPv4SG feature is disabled on an interface.

Views

Layer 2 Ethernet interface view

Layer 3 Ethernet interface view

Layer 3 Ethernet subinterface view

VLAN interface view

Predefined user roles

network-admin

Parameters

ip-address: Filters incoming packets by source IPv4 addresses.

ip-address mac-address: Filters incoming packets by source IPv4 addresses and source MAC addresses.

mac-address: Filters incoming packets by source MAC addresses.

Usage guidelines

After you enable IPv4SG on an interface, this feature uses static and dynamic IPv4SG bindings to match incoming packets on the interface. Packets that match an IPv4SG binding are forwarded and packets that do not match any IPv4SG binding are discarded.

The matching criterion specified by this command applies only to dynamic IPSG. Static IPv4SG uses static bindings configured by using the ip source binding command.

You cannot enable dynamic IPv4SG on a service loopback interface.

If you execute this command multiple times on an interface, the most recent configuration takes effect.

The newly specified matching criterion takes effect only on users that come online from the interface after the criteriaon is specified. For existing online users, the new criterion takes effect only when the users come online again from the interface.

Examples

# Enable IPv4SG on Layer 2 Ethernet interface Twenty-FiveGigE 1/0/1 and verify the source IPv4 address and MAC address for dynamic IPSG.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/1

[Sysname-Twenty-FiveGigE1/0/1] ip verify source ip-address mac-address

# Enable IPv4SG on VLAN-interface 100 and verify the source IPv4 address and MAC address for dynamic IPSG.

<Sysname> system-view

[Sysname] interface vlan-interface 100

[Sysname-Vlan-interface100] ip verify source ip-address mac-address

# Enable IPv4SG on Layer 3 Ethernet interface Twenty-FiveGigE 1/0/2 and verify the source IPv4 address and MAC address for dynamic IPSG.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/2

[Sysname-Twenty-FiveGigE1/0/2] ip verify source ip-address mac-address

# Enable IPv4SG on Layer 3 Ethernet interface Twenty-FiveGigE 1/0/2 and verify the source MAC address for dynamic IPSG.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/2

[Sysname-Twenty-FiveGigE1/0/2] ip verify source mac-address

Related commands

display ip source binding

ipv6 source binding (interface view)

Use ipv6 source binding to configure a static IPv6SG binding.

Use undo ipv6 source binding to delete the static IPv6SG bindings configured on an interface.

Syntax

ipv6 source binding { ip-address ipv6-address | ip-address ipv6-address mac-address mac-address | mac-address mac-address } [ vlan vlan-id ]

undo ipv6 source binding { all | ip-address ipv6-address | ip-address ipv6-address mac-address mac-address | mac-address mac-address } [ vlan vlan-id ]

Default

No static IPv6SG bindings exist on an interface.

Views

Layer 2 Ethernet interface view

Layer 3 Ethernet interface view

Layer 3 Ethernet subinterface view

VLAN interface view

Predefined user roles

network-admin

Parameters

ip-address ipv6-address: Specifies an IPv6 address for the static binding. The IPv6 address cannot be an all-zero address, a multicast address, or a loopback address.

mac-address mac-address: Specifies a MAC address for the static binding. The MAC address must be in H-H-H format, and cannot be all 0s, all Fs (a broadcast MAC address), or a multicast MAC address.

vlan vlan-id: Specifies a VLAN ID for the static binding. The value range is 1 to 4094. This option is supported only in Layer 2 Ethernet interface view.

all: Removes all the static IPv6SG bindings on the interface.

Usage guidelines

Static IPv6SG bindings on an interface filter incoming IPv6 packets, and check user validity by cooperating with the ND attack detection feature.

You cannot configure static IPv6SG bindings on a service loopback interface.

Examples

# Configure a static IPv6SG binding on Twenty-FiveGigE 1/0/1.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/1

[Sysname-Twenty-FiveGigE1/0/1] ipv6 source binding ip-address 2001::1 mac-address 0002-0002-0002

Related commands

display ipv6 source binding

display ipv6 source binding pd

ipv6 source binding (system view)

Use ipv6 source binding to configure a global static IPv6SG binding.

Use undo ipv6 source binding to delete one or all global static IPv6SG bindings.

Syntax

ipv6 source binding ip-address ipv6-address mac-address mac-address

undo ipv6 source binding { all | ip-address ipv6-address mac-address mac-address }

Default

No global static IPv6SG bindings exist.

Views

System view

Predefined user roles

network-admin

Parameters

ipv6-address ipv6-address: Specifies the IPv6 address for the static binding. The IPv6 address cannot be an all-zero address, a multicast address, or a loopback address.

mac-address mac-address: Specifies the MAC address for the static binding. The MAC address must be in H-H-H format, and cannot be all 0s, all Fs (a broadcast MAC address), or a multicast MAC address.

all: Removes all global static IPv6SG bindings.

Usage guidelines

A global static IPv6SG binding takes effect on all interfaces.

Examples

# Configure a global static IPv6SG binding.

<Sysname> system-view

[Sysname] ipv6 source binding ipv6-address 2001::1 mac-address 0002-0002-0002

Related commands

display ipv6 source binding

display ipv6 source binding pd

ipv6 source binding (interface view)

ipv6 verify source

Use ipv6 verify source to enable IPv6SG on an interface.

Use undo ipv6 verify source to disable IPv6SG on an interface.

Syntax

ipv6 verify source { ip-address | ip-address mac-address | mac-address }

undo ipv6 verify source

Default

The IPv6SG feature is disabled on an interface.

Views

Layer 2 Ethernet interface view

Layer 3 Ethernet interface view

Layer 3 Ethernet subinterface view

VLAN interface view

Predefined user roles

network-admin

Parameters

ip-address: Filters incoming packets by source IPv6 addresses.

ip-address mac-address: Filters incoming packets by source IPv6 addresses and source MAC addresses.

mac-address: Filters incoming packets by source MAC addresses.

Usage guidelines

After you enable IPv6SG on an interface, this feature uses static and dynamic IPv6SG bindings to match incoming packets on the interface. Packets that match an IPv6SG binding are forwarded and packets that do not match any IPv6SG binding are discarded.

The matching criterion specified by this command applies only to dynamic IPv6SG. Static IPv6SG uses static bindings configured by using the ipv6 source binding command.

You cannot enable dynamic IPv6SG on a service loopback interface.

If you execute this command multiple times on an interface, the most recent configuration takes effect.

Examples

# Enable IPv6SG on Layer 2 Ethernet interface Twenty-FiveGigE 1/0/1 and verify the source IPv6 address and MAC address for dynamic IPv6SG.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/1

[Sysname-Twenty-FiveGigE1/0/1] ipv6 verify source ip-address mac-address

Related commands

display ipv6 source binding

display ipv6 source binding pd

ipv6 verify source max-entries

Use ipv6 verify source max-entries to set the maximum number of IPv6SG bindings on an interface.

Use undo ipv6 verify source max-entries to restore the default.

Syntax

ipv6 verify source max-entries number

undo ipv6 verify source max-entries

Default

The maximum number of IPv6SG bindings is not limited on an interface.

Views

Layer 2 Ethernet interface view

Predefined user roles

network-admin

Parameters

number: Specifies the maximum number of IPv6SG bindings, in the range of 0 to 4294967294.

Usage guidelines

This feature is supported only in Release 6635 and later.

This command limits the total number of static and dynamic IPv6SG bindings on an interface.

If the maximum number of IPv6SG bindings is reached on an interface, no more IPv6SG bindings can be added on the interface.

If you set the maximum number of IPv6SG bindings to be smaller than the number of existing IPv6SG bindings, the configuration can be successful. The existing IPv6SG bindings are not affected. The interface does not learn IPv6SG bindings until the number of existing IPv6SG bindings is smaller than the maximum number.

The number of effective IPv6SG bindings on an interface is limited by hardware resources.

Examples

# Set the maximum number of IPv6SG bindings to 200 on Twenty-FiveGigE 1/0/1.

<Sysname> system-view

[Sysname] interface twenty-fivegige 1/0/1

[Sysname-Twenty-FiveGigE1/0/1] ipv6 verify source max-entries 200

Related commands

ipv6 source binding (interface view)

09-Security Command Reference

IP source guard commands

display ip source binding

display ip source binding-local

display ip source binding-remote

display ip source binding statistics

display ipv6 source binding

display ipv6 source binding-local

display ipv6 source binding-remote

display ipv6 source binding pd

display ipv6 source binding statistics

ip source binding (interface view)

ip source binding (system view)

ip verify source

ipv6 source binding (interface view)

ipv6 source binding (system view)

ipv6 verify source

ipv6 verify source max-entries

Cloud & AI

InterConnect

Intelligent Computing

Security

SMB Products

Intelligent Terminal Products

Industry Solutions

Product Support Services

Technical Service Solutions

Resource Center

Policy

Online Help

Training & Certification

Become a Partner

Partner Resources

Partner Business Management

Company Information

News & Events

Online Exhibition Center

Contact Us