Login
- Table of Contents
-
- 06-Layer 3-IP Services Command Reference
- 00-Preface
- 01-ARP commands
- 02-IP addressing commands
- 03-DHCP commands
- 04-DNS commands
- 05-NAT commands
- 06-IP forwarding basics commands
- 07-Fast forwarding commands
- 08-Multi-CPU packet distribution commands
- 09-Adjacency table commands
- 10-IRDP commands
- 11-IP performance optimization commands
- 12-UDP helper commands
- 13-IPv6 basics commands
- 14-DHCPv6 commands
- 15-IPv6 fast forwarding commands
- 16-AFT commands
- 17-Tunneling commands
- 18-GRE commands
- 19-ADVPN commands
- 20-WAAS commands
- Related Documents
-
08-Multi-CPU packet distribution commands
| Title | Size | Download |
|---|---|---|
| 08-Multi-CPU packet distribution commands | 27.99 KB |
Multi-CPU packet distribution commands
forwarding policy
Use forwarding policy to specify a multi-CPU packet distribution policy.
Use undo forwarding policy to restore the default.
Syntax
forwarding policy { per-flow | per-packet }
undo forwarding policy
Default
The flow-based policy is used.
Views
System view
Predefined user roles
network-admin
Parameters
per-flow: Specifies the flow-based forwarding. The CPU processing follows the first-in first-out rule.
per-packet: Specifies the packet-based forwarding. The device forwards packets in sequence to different CPUs, even though they are the same flow. This policy does not ensure packet order.
Examples
# Specify the flow-based policy.
<Sysname> system-view
[Sysname] forwarding policy per-flow
