ACSEI configuration commands 1

acsei client reboot 1

acsei server 1

acsei server enable· 2

acsei timer clock-sync· 2

acsei timer monitor 3

display acsei client info· 3

display acsei client summary· 5

 

acsei client reboot

Syntax

acsei client reboot client-id

View

ACSEI server view

Default level

2: System level

Parameters

client-id: ID of the ACSEI client to be restarted.

Description

Use acsei client reboot to restart the specified ACSEI client.

Examples

# Restart ACSEI client 1.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei client reboot 1

acsei server

Syntax

acsei server

View

System view

Default level

2: System level

Parameters

None

Description

Use acsei server to enter ACSEI server view.

You can use this command to enter ACSEI server view only when you enable the ACSEI server function with the acsei server enable command.

Examples

# Enter ACSEI server view.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server]

acsei server enable

Syntax

acsei server enable

undo acsei server enable

View

System view

Default level

2: System level

Parameters

None

Description

Use acsei server enable to enable ACSEI server.

Use undo acsei server enable to disable ACSEI server.

By default, ACSEI server is disabled.

Examples

# Enable ACSEI server.

<Sysname> system-view

[Sysname] acsei server enable

acsei timer clock-sync

Syntax

acsei timer clock-sync minutes

undo acsei timer clock-sync

View

ACSEI server view

Default level

2: System level

Parameters

minutes: Value of the synchronization timer that is used for clock synchronization from ACSEI server to ACSEI client. It is in the range of 0 to 1440 (in minutes), where value 0 disables the clock synchronization from ACSEI server to ACSEI client.

Description

Use acsei timer clock-sync to set the synchronization timer that is used for clock synchronization from ACSEI server to ACSEI client.

Use undo acsei timer clock-sync to restore the default.

By default, the clock sychronization timer is set to 5 minutes.

Examples

# Set the clock synchronization timer from ACSEI server to ACSEI client to 20 minutes.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei timer clock-sync 20

acsei timer monitor

Syntax

acsei timer monitor seconds

undo acsei timer monitor

View

ACSEI server view

Default level

2: System level

Parameters

seconds: Value of the monitoring timer that is used for ACSEI server to monitor ACSEI clients. It in the range of 0 to 10 (in seconds), where 0 disables ACSEI server from monitoring ACSEI client.

Description

Use acsei timer monitor to set the monitoring timer for ACSEI server to monitor ACSEI client.

Use undo acsei timer monitor to restore the default.

By default, the monitoring timer is set to 5 seconds.

Examples

# Set the monitor timer for ACSEI server to monitor ACSEI client to 6 seconds.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei timer monitor 6

display acsei client info

Syntax

display acsei client info [ client-id ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

client-id: ID of an ACSEI client.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display acsei client info to display the ACSEI client information. The client information is retrieved from the advertisement packet sent by the ACSEI client, so that when there is no ACSEI client information, the command displays the information keywords only.

If executed without the client-id argument, the command displays information about all the ACSEI clients in order of registration time.

Examples

# Display information about ACSEI client 1.

<Sysname> display acsei client info 1

 Total Client Number: 1

 client ID: 1

 client Description: SecBlade FW

 Hardware: A.0

 System Software: COMWAREV500R002B83D203

 Application Software: V300R001B01D303

 CPU: RMI XLR732 1000MHz

 PCB Version: A.0

 CPLD Version: 3.0

 Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.29

 CF card: 247M Bytes Compact Flash Storage Device

 Memory: 2048M Bytes DDR2 SDRAM Memory

 Harddisk:

# Display information about all ACSEI clients.

<Sysname> display acsei client info

Total client Number: 2

 client ID: 1

 client Description: SecBlade FW

 Hardware: A.0

 System Software: COMWAREV500R002B83D203

 Application Software: V300R001B01D303

 CPU: RMI XLR732 1000MHz

 PCB Version: A.0

 CPLD Version: 3.0

 Bootrom Version: Basic BootRom Version:1.28,Extend BootRom Version:1.29

 CF card: 247M Bytes Compact Flash Storage Device

 Memory: 2048M Bytes DDR2 SDRAM Memory

 Harddisk:

 client ID: 2

 client Description: Intrusion Prevention System

 Hardware: 2.0

 System Software: i-Ware software, Version 1.10

 Application Software: Ess 2110P01

 CPU: RMI XLR732

 PCB Version: Ver.A

 CPLD Version: 2.0

 Bootrom Version: 1.19

 Storage card: 247MB

 Memory: 1993MB

 Harddisk: 0MB

Table 1 Command output

Field	Description
client ID	ID of the ACSEI client.
client Description	ACSEI client description.
Hardware	Hardware version of the ACSEI client.
System Software	System software name and version of the ACSEI client.
Application Software	Application name and version of the ACSEI client.
CPU	CPU information of the ACSEI client.
PCB Version	PCB version of the ACSEI client.
CPLD Version	CPLD version of the ACSEI client.
Bootrom Version	BootWare version of the ACSEI client.
Storage card	Storage card information of the ACSEI client.
Memory	Memory information of the ACSEI client.
Harddisk	Harddisk information of the ACSEI client.

 

display acsei client summary

Syntax

display acsei client summary [ client-id ] [ | { begin | exclude | include } regular-expression ]

View

Any view

Default level

1: Monitor level

Parameters

client-id: ID of an ACSEI client whose summary is to be displayed.

|: Filters command output by specifying a regular expression. For more information about regular expressions, see Fundamentals Configuration Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use display acsei client summary to display ACSEI client summary information. Summary information of multiple ACSEI clients is displayed in order of registration time.

If executed without the client-id argument, the command displays summary information about all the ACSEI clients.

Examples

# Display the summary of all ACSEI clients.

<Sysname> display acsei client summary

Total client Number: 1

 client ID: 1

 Status: Open

 MAC Address: 0023-8992-020a

 Interface: Ten-GigabitEthernet6/0/1

 Last registered:  07/22/2010 15:53:13

Table 2 Command output

Field	Description
client ID	ID of the ACSEI client.
Status	ACSEI client status.
MAC Address	MAC address of the ACSEI client.
Interface	Interface carrying the ACSEI client.
Last registered	Last registration time of the ACSEI client.