H3C SecPath F1000[F5000][VFW] Firewalls Series Command Reference(V7)-6W600-book_CHM.rar(10.37 MB)
H3C SecPath F1000[F5000][VFW] Firewalls Series Command Reference(V7)-6W600-book.pdf(61.29 MB)
- Released At: 16-04-2024
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
About the H3C SecPath firewall series command references
Applicable hardware and software versions
To obtain software version information for a device, use the display version command in any view on the device. The command references use the XXXXP20 versions as examples to illustrate feature commands. For information about feature changes in other software versions, see the release notes for your device.
The following matrix shows the hardware and software versions to which the command references are applicable:
F1000 Series |
Device model |
Software version |
F5000 series |
F5030、F5030-6GW、F5060、F5080、F5000-M、F5000-A |
R9660 |
F5010、F5020-GM、F5020、F5040、F5000-C、F5000-S |
R9360 |
|
F5000-AI-15 |
R8660 |
|
F5000-AI series |
F5000-AI-20、F5000-AI-40 |
R9660 |
F5000-CN series |
F5000-CN30、F5000-CN60 |
E8160 |
FX000-V series |
F5000-V30 |
R9660 |
F1000-V50、F1000-V60 |
R8660 |
|
F1000-V70 |
R9360 |
|
F1000-V90 |
R8660 |
|
F10X0 series |
F1005、F1010 |
R9560 |
F1020、F1020-GM、F1030、F1030-GM、F1050、F1060、F1070、F1070-GM、F1070-GM-L、F1080 |
R9360 |
|
F1090 |
R8660 |
|
F1000-AK series |
F1000-AK108、F1000-AK109、F1000-AK110、F1000-AK115、F1000-AK120、F1000-AK125、F1000-AK710、F1000-AK1010、F1000-AK1020、F1000-AK1030、F1000-AK1110、F1000-AK1120、F1000-AK1130、F1000-AK1140 |
R9560 |
F1000-AK1150、F1000-AK1160、F1000-AK1170、F1000-AK1180 |
R8860 |
|
F1000-AK130、F1000-AK135、F1000-AK140、F1000-AK145、F1000-AK150、F1000-AK155、F1000-AK160、F1000-AK165、F1000-AK170、F1000-AK175、F1000-AK180、F1000-AK185、F1000-AK711、F1000-GM-AK370、F1000-GM-AK380、F1000-AK1212、F1000-AK1222、F1000-AK1232、F1000-AK1312、F1000-AK1322、F1000-AK1332 |
R9360 |
|
F1000-AK1242、F1000-AK1252、F1000-AK1262、F1000-AK1272、F1000-AK1342、F1000-AK1352、F1000-AK1362、F1000-AK1414、F1000-AK1424、F1000-AK1434、F1000-AK1514、F1000-AK1524、F1000-AK1534、F1000-AK1614 |
R8660 |
|
F1000-AK9110、F1000-AK9220 |
E9560 |
|
F1000-AI-X0 series |
F1000-AI-05 |
E8860 |
F1000-AI-10 |
R8860 |
|
F1000-AI-15 |
E8860 |
|
F1000-AI-20、F1000-AI-30、F1000-AI-50 |
R9360 |
|
F1000-AI-60、F1000-AI-70、F1000-AI-80、F1000-AI-90 |
R8660 |
|
F1000-AI-X5 series |
F1000-AI-25、F1000-AI-35、F1000-AI-55、F1000-AI-65、F1000-AI-75 |
R8860 |
F1000-SASE series |
F1000-SASE100、F1000-SASE200 |
E8860 |
F1000-L series |
F1003-L、F1005-L、F1010-L |
R9560 |
SecBlade III |
LSU3FWCEA0、LSUM1FWCEAB0、LSX1FWCEA1 |
R8260 |
SecBlade IV |
LSXM1FWDF1、LSUM1FWDEC0、IM-NGFWX-IV、LSQM1FWDSC0、LSWM1FWD0、LSQM2FWDSC0、LSPM6FWD、LSPM6FWDB |
R8560 |
Vfw series |
vFW1000、vFW2000 |
E1185 |
Contents
Table 1 lists features included in each command reference. Support for the features depends on the device model.
Table 1 Command reference content
Command reference |
Content |
Fundamentals Command Reference |
Covers the commands for using the CLI and logging in to and setting up a firewall. This command reference includes: · CLI (command privilege settings and CLI management commands) · RBAC · Login management (including login methods and login user access control) · License management · Device management · FTP and TFTP · File system management · Configuration file management · Software upgrade · ISSU · Automatic configuration · Tcl · Python |
Virtual Technologies Command Reference |
Covers the commands for configuring virtual technologies features. .This command reference includes: · IRF · Context · Reth interface and redundancy group |
Security Command Reference |
Covers security feature commands. Available security features include identity authentication (AAA and PKI), access security (portal), secure management (SSH), and attack protection (ARP attack protection, uRPF, and attack detection and prevention). This command reference includes: · Security zone · Security policy · ASPF · Session management · Object group · IP source guard · AAA · 802.1X · User identification · Password control · Portal · MAC authentication · IPoE · PKI · SSH · SSL · Connection limit · Attack detection and prevention · Server connection detection · ARP attack protection · ND attack defense · uRPF · IP-MAC binding · APR · Keychain · Crypto engine · MAC learning through a Layer 3 device · SMS |
DPI Command Reference |
Covers the commands for configuring deep packet inspection (DPI). This command reference includes: · DPI engine · IPS · URL filtering · Data filtering · File filtering · Anti-virus · Data analysis center · Proxy policy · WAF · IP reputation · APT defense · Domain reputation |
NAT Command Reference |
Covers the commands for configuring NAT features. This command reference includes: · NAT · NAT66 · AFT |
VPN Command Reference |
Covers the commands of multiple VPN technologies. This command reference includes: · SSL VPN · IPsec, · ADVPN · Tunneling · GRE · L2TP |
Internet Access Behavior Management Command Reference |
Covers the Internet access behavior management commands. This command reference includes: · Bandwidth management · Application audit and management · NetShare control |
Load Balancing Command Reference |
Covers the commands for configuring load balancing. |
High Availability Command Reference |
Covers high availability commands for managing failure detection and failover. |
Interface Command Reference |
Covers the interface management commands. This command reference includes: · Bulk interface · Ethernet interface · Loopback, null, and inloopback interfaces |
Layer 2—LAN Switching Command Reference |
Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes: · MAC address table · Ethernet link aggregation · VLAN · VLAN termination · Spanning tree · LLDP · Layer 2 forwarding |
Layer 2—WAN Access Command Reference |
Covers the Layer 2 WAN access commands. This command reference includes: · PPP · Mobile communication modem |
Layer 3—IP Services Command Reference |
Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes: · IP addressing · IP forwarding basics · Fast forwarding · ARP (including proxy ARP) · IPv6 basics · IPv6 fast forwarding · DHCP · DHCPv6 · DNS · IP performance optimization · Multi-CPU packet distribution · Adjacency table · Web caching |
Layer 3—IP Routing Command Reference |
Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes: · Basic IP routing · Static routing · IPv6 static routing · RIP · RIPng · OSPF · OSPFv3 · IS-IS · BGP · Policy-based routing · IPv6 policy-based routing · Routing policy · Guard route · RIR |
ACL and QoS Command Reference |
Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes: · ACL · QoS (including QoS policy and traffic policing) · Time range |
IP Multicast Command Reference |
Covers the commands for Layer 3 multicast protocols. This command reference includes: · Multicast routing and forwarding · IGMP · PIM · IPv6 multicast routing and forwarding · MLD |
Network Management and Monitoring Command Reference |
Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes: · Flow log · Fast log output · NetStream · Cloud connection · Mirroring · Packet capture · NQA · Track · BFD · Monitor Link · Smart Link · Interface backup · Interface collaboration · System maintenance and debugging · NTP · EAA · Process monitoring and maintenance · NETCONF · SNMP · RMON · Event MIB · CWMP · Process placement |
VPN Instance Command Reference |
Covers the commands for configuring VPN instances. |
VXLAN Command Reference |
Covers the commands for configuring VXLANs. |
Service Chain Command Reference |
Covers the commands for configuring Service Chain. |