Login
H3C SECPATHL5000AD540G-SECPATHL5000AD190G-CMW710-R9900P34 Release Notes
Contents
Version compatibility matrix· 1
Upgrade restrictions and guidelines· 3
Software feature and command updates· 3
Registering and installing licenses· 4
Open problems and workarounds· 5
Resolved problems in R9900P34· 5
Resolved problems in R9900P31· 5
Resolved problems in R9900P30· 5
Resolved problems in R9900P2701· 6
Resolved problems in R9900P24· 6
Appendix B Fixed vulnerabilities· 12
Appendix C Upgrading software· 13
Upgrading system software from the CLI 14
Upgrading system software from the Web interface· 22
Upgrading the BootWare from the CLI 24
Upgrading the BootWare from an Ethernet interface through TFTP/FTP· 24
Performing file management from the BootWare menu· 28
Handling software upgrade failures· 32
List of tables
Table 2 Version compatibility matrix. 1
Table 6 Default login information. 22
Table 11 File control submenu. 29
This document introduces the features, usage restrictions, issues, and workarounds of version R9900P34. Before loading R9900P34, back up the configuration file and perform internal verification to avoid potential risks as a best practice.
Use this document in conjunction with H3C SECPATHL5000AD540G-SECPATHL5000AD190G-CMW710-R9900P34 Release Notes (Software Feature Changes) and the documents listed in "Related documentation."
Version information
Version number
Version number: H3C Comware Software, Version 7.1.064, Release 9900P34
You can see the version number with the display version command in any view.
Version number | Last version | Release date | Version type | Remarks |
R9900P34 | R9900P31 | 2025-12-29 | Release | Annual version |
R9900P31 | R9900P30 | 2025-10-31 | Release | Fixed bugs |
R9900P30 | R9900P2701 | 2025-09-23 | Release | Released for Technical Support. |
R9900P2701 | R9900P24 | 2025-06-30 | Release | Released for Technical Support. |
R9900P24 | N/A | 2025-3-17 | Release | Fixed bugs. |
Supported browsers
As a best practice, use the following browsers:
· IE 10 or higher
· Firefox 19 or higher
· Chrome 31 and later versions
· Safari 5 and later versions
Version compatibility matrix
CAUTION: To avoid an upgrade failure, use the following table to verify the hardware and software compatibility before performing an upgrade. |
Table 2 Version compatibility matrix
Product model | |||
Model | L5000-AD540-G | L5000-AD520-G | L5000-AD190-G[AD170-G][AD150-G] |
Memory | 64 GB | 32 GB | 16 GB |
Flash | 8 GB EMMC flash | ||
Boot ROM version | 1.19 (You can see the version number with the display version command in any view.) | ||
Software image file and MD5 checksum | SECPATHL5000AD540G-CMW710-R9900P34.ipe:17731793fea7d0969b31b8b4857b4c00 l5000cn3ade-cmw710-boot-R9900P34.bin:8369df2f03dfe01e49686a13ca4c5eba l5000cn3ade-cmw710-system-R9900P34.bin:790e3d42a0fa9c3996da26e01ad4c334 l5000cn3ade-cmw710-system-R9900P34.xsd.tar.bz2:699b77da9a7438643c9083035df8a4c9 | ||
IMC version | iMC-ACLM 7.3 (E0710P06) iMC-DM 7.3 (E0710P06) iMC EIA 7.3 (TAM) (E0633H03) iMC-iCC 7.3 (E0710P06) iMC PLAT 7.3 (E0710P06) iMC SHM 7.3 (E0707L06) iMC SSM 7.3 (LBM) (E0505P03) iMC SSM 7.3 (SSM) (E0506H01) iMC-VLAN 7.3 (E0710P06) | ||
iNode version | iNode PC 7.3 (E0644) | ||
ADDC version | ADDC 7.1 | ||
ADNET-FCAPS version | E0709 | ||
AOM version | E0706P01 | ||
Remarks | N/A | ||
Example: To display the host software and BootWare version of L5000-AD540-G, perform the following:
<H3C>dis version
H3C Comware Software, Version 7.1.064, Release 9900P34
Copyright (c) 2004-2024 New H3C Technologies Co., Ltd. All rights reserved.
H3C SecPath L5000-AD540-G uptime is 0 weeks, 0 days, 0 hours, 3 minutes
Last reboot reason: UserReboot
Boot image: flash:/l5000cn3ade-cmw710-boot-R9900P34.bin
Boot image version: 7.1.064, Release 9900P34
Compiled Aug 15 2024 15:00:00
System image: flash:/l5000cn3ade-cmw710-system-R9900P34.bin
System image version: 7.1.064, Release 9900P34
Compiled Aug 15 2024 15:00:00
SLOT 1 CPU 0
CPU type : Multi-core CPU
DDR4 SDRAM Memory : 65536M bytes
FLASH : 7312M bytes
Board PCB Version: Ver. A
CPLD Version: 5.0
Basic BootWare Version: 1.14
Extend BootWare Version: 1.14
[SubSlot 0] (Hardware)Ver.A, (Driver)1.0, (Cpld)5.0
[SUBCARD 1] NS-HPIM-TG4A (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0
[SUBCARD 2] NS-HPIM-TG4A (Hardware)Ver.A, (Driver)1.0, (Cpld)4.0
[SUBCARD 3] NS-HPIM-TG4A (Hardware)Ver.A, (Driver)1.0, (Cpld)4.0
[SUBCARD 4] NS-HPIM-TG4A (Hardware)Ver.A, (Driver)1.0, (Cpld)4.0
Upgrade restrictions and guidelines
Hardware feature updates
Software feature and command updates
For more information about the software feature and command update history, see H3C SECPATHL5000AD540G-SECPATHL5000AD190G-CMW710-R9900P34 Release Notes (Software Feature Changes).
MIB updates
Version number | Item | MIB file | Module name | Remarks |
R9900P34 | New | / | / | N/A |
Modified | / | / | N/A | |
R9900P31 | New | / | / | N/A |
Modified | / | / | N/A | |
R9900P30 | New | / | / | N/A |
Modified | / | / | N/A | |
New | / | / | N/A | |
Modified | / | / | N/A | |
R9900P24 | New | / | / | N/A |
Modified | / | / | N/A |
Operation changes
Restrictions and cautions
Before performing an upgrade, see H3C SECPATHL5000AD540G-SECPATHL5000AD190G-CMW710-R9900P34 Release Notes (Software Feature Changes) and related documentation to see the software feature changes and evaluate the influence on the service.
Restrictions
· You cannot configure the same feature module both at the CLI and in the Web interface.
· The number of contexts used must strictly follow the specifications.
· The 4SFP+/8SFP+/8SFP/8GE network cards do not support per-packet processing.
· The 4SFP+/8SFP+ interface cards do not support Gigabit autosensing or 1G fiber-to-copper modules. 10G fiber-to-copper modules are supported.
· Interface cards do not support hot swapping.
Cautions
· As a best practice, do not perform operations such as restarting, starting, or stopping contexts when memory is insufficient.
· If multiple virtual servers use the same LB policy, the different real server groups corresponding to the load balancing actions of each virtual server must either all perform source address translation or all not perform source address translation.
· SNAT addresses must not overlap with health check source addresses. You can use an interface secondary address as the SNAT address, or bind the health check to a local IP different from the SNAT address.
Licensing
About licensing
H3C offers licensing options for you to deploy features and expand resource capacity on an as needed basis. To use license-based features, purchase licenses from H3C and install the licenses.
Registering and installing licenses
H3C License Management Platform provides product licensing services for H3C customers. You can access this system to obtain an activation file or transfer licenses.
H3C License Management Platform is accessible at http://www.h3c.com/en/License/.
For more information about license registration, activation file installation, and license transfer, see H3C Security Products Licensing Configuration Demonstration Video, H3C Security Products Licensing Configuration Demonstration, H3C Security Products Licensing Configuration Examples, and H3C Security Products Licensing Guide.
H3C provides license-related FAQ. For more information, see H3C Security Products Licensing FAQ.
On the virtual server page, when both iShell script and VRF need to be configured simultaneously, configure the VRF after the IP address of the virtual server.
In an N+M cluster scenario, virtual servers of different traffic groups must use different SNAT address pools.
Open problems and workarounds
202504221214
· Symptom: When there is traffic on the VS, editing the IP or VRF of the VS will cause VS flag change, leading to VS packet loss.
· Condition: This symptom might occur if you edit the IP or VRF of the VS while traffic is present.
· Workaround: Do not edit the IP or VRF of the VS while traffic is present.
List of resolved problems
Resolved problems in R9900P34
202512090999
· Symptom: When you construct IPv6 packets of mixed lengths and protocol value of 60 and send them to the device ingress interface for link service processing, all service ports of the device cannot be pinged, and all services fail.
· Condition: This symptom might occur when IPv6 packets of mixed lengths and protocol value of 60 are sent.
Resolved problems in R9900P31
202509120457
· Symptom: In SSL bidirectional or load traffic scenarios, when you enable per-request load sharing, the first two requests or the last two requests do not fail when traffic is sent. However, when all four requests are sent together and distributed to two SFs, failures occur. The client captures a packet where one request does not receive a 200 OK, and the server discards this request. This is related to asynchronous encryption.
· Condition: This symptom might occur in SSL bidirectional or load traffic scenarios when per-request load sharing is enabled and one connection has multiple requests.
Resolved problems in R9900P30
202508210656
· Symptom: The card reboots if you execute the undo loadbalance ssl performance-optimize cache-value command use the AES128-SHA cipher suite when SSL traffic is present.
· Condition: This symptom occurs if you execute the undo loadbalance ssl performance-optimize cache-value command use the AES128-SHA cipher suite when SSL traffic is present.
Resolved problems in R9900P2701
202503040268
· Symptom: The returned values are null when a MIB browser is used to read nodes of the virtual server name, server farm name, and real server name through SNMP.
· Condition: This symptom occurs if nodes of the virtual server name, server farm name, and real server name are read through SNMP
Resolved problems in R9900P24
N/A
Related documentation
Documentation set
· H3C SecPath L5000-AD5X0[AD1X0] Series Configuration Guides(V7)(R9900)
· H3C SecPath L5000-AD5X0[AD1X0] Series Command Reference(V7)(R9900)
Obtaining documentation
To obtain the latest documents, go to the H3C website at www.h3c.com/en
· To obtain the most recent drive and firmware, access http://www.h3c.com/en/Technical_Documents
· Select the product category and product model. Then, you can search for and download documents related to the product.
Technical support
Email: [email protected]
Website: http://www.h3c.com/en
Item | Specifications | |||
Product model | L5000-AD540-G | L5000-AD520-G | L5000-AD190-G[AD170-G][AD150-G] | |
Ports | 1 × console port 1 × management Ethernet port 2 × USB 2.0 ports | |||
Memory | 64 GB | 32 GB | 16 GB | |
Flash | 8 GB | |||
Expansion slots | 4 expansion slots that support the following interface modules: · 8-port SFP interface module · 4-port SFP+ interface module · 8-port GE interface module · NS-FPIM-CQG4TG16GT16AL high-density interface module | |||
Hard disk slots | 2 × M.2 hard disk slots | |||
Power modules | 2 power expansion slots, supporting AC or DC power supply modules. In dual power mode, the power supply modules must have the same specifications. Supported power supply specifications are 250W AC, 450W AC, 450W DC, and 450W HVDC. | |||
Dimensions (H × W × D) | 44 × 560 × 440 mm (1.73 × 22.05 ×17.32 in) | |||
Temperature | · Operating: ¡ Without disks: 0°C to 40°C (32°F to 104°F) ¡ With disks: 5°C to 40°C (41°F to 104°F) · Storage: –40°C to 70°C (–40°F to 158°F) | |||
Humidity | · Operating: ¡ Without disks: 5% RH to 95% RH ¡ With disks: 10% RH to 90% RH · Storage: 5% RH to 95% RH | |||
Category | Features | |
Server load balancing | Scheduling algorithms | Weighted round-robin algorithm Random Real server-based weighted least connections Dynamic feedback Minimum time Bandwidth Maximum bandwidth Source IP address hash Source IP address CARP hash Source IP address and port hash Source IP address and port CARP hash Destination IP address hash Destination IP address CARP hash HTTP hash HTTP CARP hash Member-based weighted least connections Priority-based scheduling algorithm URL-based hash |
Session persistence | Source IP address-based session persistence Destination IP address-based session persistence Source IP and source port-based session persistence Destination IP and destination port-based session persistence Source IP, source port, destination IP, destination port-based session persistence Source IP and destination IP-based session persistence HTTP packet header-based session persistence HTTP cookie-based session persistence HTTP content-based session persistence HTTP URL-based session persistence SIP-based session persistence RADIUS attribute-based session persistence DHCP attribute-based session persistence SSL ID-based session persistence | |
Health check | ICMP TCP TcpHalfOpen FTP HTTP HTTPS SSL DNS Radius UDP POP3 RTSP IMAP4 SNMP SIP ARP SMTP snmp-dca WAP Custom Combined health check algorithm | |
HTTP policy | Policy matching elements: · HTTP cookie · HTTP header · HTTP URL · HTTP content · HTTP method · HTTP class: Nested invocation of HTTP classes · generic-class: Using generic classes as matching conditions Actions: · HTTP Header insert · HTTP Header rewrite · HTTP Header delete · SSL URL location rewrite · SSL Client policy set · Real server farm selection | |
Generic policy | Policy matching elements: · Source IP · generic-class: Nested invocation of generic classes Actions: · SSL client policy setting · IP ToS setting · Real server farm selection | |
Protection policy | HTTP protection policy | |
WebSocket | WebSocket | |
HTTP parameter profile | Case sensitivity Maximum HTTP header resolve length Maximum HTTP content resolve length Server connection multiplexing HTTP message modification per request HTTP request distribution Secondary cookie separator Secondary cookie start bit character Handling method for URL or cookie exceeding maximum length | |
TCP parameter profile | Setting the processing method for data segments exceeding MSS: allow or discard Setting the size of the send and receive buffers | |
IP parameter profile | Setting the ToS field of IP packets responded by the real server through the device | |
SSL offloading | SSL offloading: offload SSL-based traffic All SSL server features, including certificate management, and authentication SSL client features, SSL encrypted transmission with backend servers | |
Inbound link load balancing | Inbound link load balancing | DNS listener DNS query type Bandwidth busy protection Link health inspection Load sharing algorithms, including least connections, random, and round-robin. |
Outbound link load balancing | Outbound link load balancing | Load sharing algorithms, including least connections, random, round-robin, address HASH, bandwidth, and link quality. Traffic classification based on source IP, ISP, and ACL. Dynamic proximity Link health inspection ALG Bandwidth busy protection |
Management | Management mode | CLI (Telnet/SSH) Serial port SNMPv3, compatible with SNMP v2c and SNMP v1 IMC |
Networking | Networking schemes | L4/L7 server load balancing Bypass mode |
CAUTION: Do not power off or reboot the device during the upgrade process. |
The software upgrade procedure is the same for all security devices. This chapter describes how to upgrade software from the CLI and Web interface. The default storage medium varies by device model. This chapter uses the flash memory as the default storage medium.
The following software types are available:
· BootWare image—A .btw file that contains a basic segment and an extended segment. The basic segment is the minimum code that bootstraps the system. The extended segment enables hardware initialization and provides system management menus. You can use these menus to load software and the startup configuration file or manage files when the device cannot start up correctly.
· System software image—Includes the following image subcategories:
¡ Boot image—A .bin file that contains the Linux operating system kernel. It provides process management, memory management, file system management, and the emergency shell.
¡ System image—A .bin file that contains the Comware kernel and standard features, including device management, interface management, configuration management, and routing.
¡ Patch image—A .bin file that is released for fixing bugs without rebooting the device. A patch image does not add or remove features.
You can assign the following attributes to a system software image:
¡ Main—The image is the primary image. The system always attempts to load the main image at startup in preference to the backup image.
¡ Backup—The image is the backup image. It is used only if the primary image is corrupt or not available.
Software images are released in one of the following forms:
· Separate .bin files. You must verify compatibility between software images.
· As a whole in one .ipe package file. The images in an .ipe package file are compatible. The system decompresses the file automatically, loads the .bin images and sets them as startup software images.
You can save settings you made to a configuration file so they can survive a reboot.
The device supports .cfg configuration files. The default .cfg configuration file is named startup.cfg.
To upgrade system software, use one of the following methods:
· Upgrading system software from the CLI
· Upgrading system software from the Web interface
To upgrade the BootWare, use either of the following methods:
· Upgrading the BootWare from the CLI
· Upgrading the BootWare from an Ethernet interface through TFTP/FTP
You must reboot the device after a system software or BootWare upgrade. A device reboot interrupts services.
Before a software upgrade, read the release notes to identify the command changes. Some commands in the configuration file might not be supported after a software upgrade.
The device can function as the TFTP client, FTP client, or FTP server. In the following examples that use TFTP or FTP, the device functions as the TFTP or FTP client.
To use a PC as the TFTP or FTP server, prepare the TFTP or FTP server software by yourself. The device is not shipped with the software.
Before you upgrade system software, complete the following tasks:
· Run a TFTP or FTP server on the file server. (Skip this task if you upgrade software from the Web interface.)
· Assign an IP address to the file server. Make sure the management Ethernet port on the device and the file server can reach each other.
By default, the IP address of the management Ethernet port GigabitEthernet 1/0/0 is 186.23.0.15/16 and the management Ethernet port belongs to the Management security zone. The Management security zone and the Local security zone can communicate with each other.
You can also change the IP address of the management Ethernet port from its default and add it to a security zone other than Management. Then, you configure a zone pair to make sure the security zone and the Local security zone can communicate with each other. For more information about security zones and zone pairs, see the security zone configuration in the fundamentals configuration guide.
· Transfer the software upgrade file to the file server and set the working directory on the TFTP or FTP server.
· Log in to the CLI of the device through the console port. (Skip this task if you upgrade software from the Web interface.)
· Make sure the upgrade has minimal impact on the network services. During the upgrade, the device cannot provide any services.
Upgrading system software from the CLI
You can use TFTP or FTP on the device to access the TFTP or FTP server to back up or download software files.
Using TFTP to upgrade system software
2. Back up the running system software image and configuration file:
a. Display current software images and startup software images.
<Sysname> display boot-loader
Software images on slot 1:
Current software images:
cfa0:/main-cmw710-boot-R8513.bin
cfa0:/main-cmw710-system-R8513.bin
Main startup software images:
cfa0:/main-cmw710-boot-R8513.bin
cfa0:/main-cmw710-system-R8513.bin
Backup startup software images:
None
b. Back up the current software images.
<Sysname> copy main-cmw710-boot-R8513.bin boot_backup.bin
<Sysname> copy main-cmw710-system-R8513.bin system_backup.bin
c. Specify boot_backup.bin and system_backup.bin as the backup startup image files.
<Sysname> boot-loader file boot cfa0:/boot_backup.bin system cfa0:/system_backup.bin backup
d. Execute the save command in any view to save the running configuration.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
<Sysname>
e. Execute the dir command in user view to identify the system software image and configuration file names and verify that the flash memory has sufficient space for the new system software image.
<Sysname> dir
Directory of flash: (VFAT)
0 drw- - Nov 15 2022 10:35:02 WEB
1 -rw- 855 Nov 14 2022 17:56:08 cacert.crt
2 drw- - Nov 15 2022 15:06:50 context
3 -rw- 512539 Oct 25 2022 20:11:38 defaultfile.zip
4 drw- - Nov 15 2022 15:12:58 diagfile
5 drw- - Mar 29 2022 09:28:26 dpi
6 -rw- 10394091 Nov 10 2022 13:52:00 dq1.mdb
7 -rw- 735 Nov 07 2022 11:17:40 hostkey
8 -rw- 207949824 Nov 18 2022 14:14:20 l5000cn.ipe
9 -rw- 34035712 Nov 16 2022 11:29:46 l5000cnade-cmw710-boot-E1160P29.bin
10 -rw- 173906944 Nov 16 2022 11:29:48 l5000cnade-cmw710-system-E1160P29.bin
11 drw- - Mar 29 2022 19:48:06 lb
12 -rw- 111720 Nov 18 2022 14:26:45 lbispinfo_v1.5.tp
13 drw- - Nov 14 2022 11:30:20 license
14 -rw- 1645 Nov 14 2022 17:56:30 local.pfx
15 drw- - Mar 29 2022 09:41:20 logfile
16 drw- - Apr 02 2022 09:02:36 pcap
17 drw- - Apr 01 2022 16:11:10 pkey
18 drw- - Nov 14 2022 17:56:30 pki
19 -rw- 800 Nov 18 2022 14:26:39 rbmSwitchInfoFile.dat
20 drw- - Sep 30 2021 03:57:36 seclog
21 -rw- 591 Nov 07 2022 11:17:40 serverkey
22 -rw- 271151 Nov 14 2022 15:45:16 startup.cfg
23 -rw- 2144097 Nov 14 2022 15:45:16 startup.mdb
24 -rw- 587148 Nov 09 2022 10:58:44 test.mdb
25 drw- - Nov 07 2022 11:37:44 versionInfo
26 drw- - Jun 30 2022 17:42:08 webtmp
27 -rw- 8202 Nov 18 2022 14:17:42 zhu.cfg
28 -rw- 557271 Nov 18 2022 14:17:42 zhu.mdb
7455012 KB total (6224148 KB free)
<Sysname>
f. Execute the tftp put command in user view to upload the startup.cfg file to the TFTP server.
<Sysname> tftp 186.23.0.15 put startup.cfg vpn-instance management
Press CTRL+C to abort.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 3950 0 0 100 3950 0 204k --:--:-- --:--:-- --:--:-- 642k
<Sysname>
3. Upgrade the system software:
a. Execute the tftp get command in user view to download the system software image file to the flash memory on the device.
<Sysname>tftp 186.23.0.15 get l5000cn.ipe
Press CTRL+C to abort.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 198M 100 198M 0 0 2231k 0 0:01:30 0:01:30 --:--:-- 2395k
Writing file...Done.
<Sysname>
b. Execute the boot-loader file command in user view to load the l5000cn.ipe file and specify it as the main image file at the next reboot.
<Sysname> boot-loader file flash:/l5000cn.ipe all main
Verifying the file flash:/l5000cn.ipe on slot 1...Done.
H3C SecPath L5060-G images in IPE:
l5000cnade-cmw710-boot-E1160P29.bin
l5000cnade-cmw710-system-E1160P29.bin
This command will set the main startup software images. Please do not reboot any MPU during the upgrade. Continue? [Y/N]:y
Add images to slot 1.
File flash:/l5000cnade-cmw710-boot-E1160P29.bin already exists on slot 1.
File flash:/l5000cnade-cmw710-system-E1160P29.bin already exists on slot 1.
Overwrite the existing files?[Y/N]:y
Decompressing file l5000cnade-cmw710-boot-E1160P29.bin to flash:/l5000cnade-cmw710-boot-E1160P29.bin...Done.
Decompressing file l5000cnade-cmw710-system-E1160P29.bin to flash:/l5000cnade-cmw710-system-E1160P29.bin...Done.
Verifying the file flash:/l5000cnade-cmw710-boot-E1160P29.bin on slot 1...Done.
Verifying the file flash:/l5000cnade-cmw710-system-E1160P29.bin on slot 1...Done.
The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.
Decompression completed.
Do you want to delete flash:/l5000cn.ipe now? [Y/N]:n
<Sysname>
c. Execute the display boot-loader command in user view to verify that the file has been loaded.
<Sysname>display boot-loader
Software images on slot 1:
Current software images:
flash:/l5000cnade-cmw710-boot-E1160P29.bin
flash:/l5000cnade-cmw710-system-E1160P29.bin
Main startup software images:
flash:/l5000cnade-cmw710-boot-E1160P29.bin
flash:/l5000cnade-cmw710-system-E1160P29.bin
Backup startup software images:
flash:/l5000cnade-cmw710-boot-E1160P29.bin
flash:/l5000cnade-cmw710-system-E1160P29.bin
<Sysname>
d. Execute the reboot command in user view to reboot the device.
<Sysname>reboot
Start to check configuration with next startup configuration file, please wait..
.......DONE!
Start to check configuration with next startup configuration file in Context con
text1, please wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
…omitted…
e. After the reboot is complete, execute the display version command to verify that the system software image is correct.
<Sysname> dis version
H3C Comware Software, Version 7.1.064, Ess 1160P29
Copyright (c) 2004-2022 New H3C Technologies Co., Ltd. All rights reserved.
H3C SecPath L5060-G uptime is 0 weeks, 0 days, 21 hours, 35 minutes
Last reboot reason: User reboot
Boot image: flash:/l5000cnade-cmw710-boot-E1160P29.bin
Boot image version: 7.1.064, Ess 1160P29
Compiled Oct 31 2022 14:00:00
System image: flash:/l5000cnade-cmw710-system-E1160P29.bin
System image version: 7.1.064, Ess 1160P29
Compiled Oct 31 2022 14:00:00
SLOT 1
CPU type: Multi-core CPU
DDR4 SDRAM Memory 32768M bytes
NSQ1F5MSPUFTA(CPU) PCB Version:Ver.A
NSQ1F5ASPUA10A(Base) PCB Version:Ver.A
NSQ1F5SWUCTCA(Front) PCB Version:Ver.B
NSQ1F5MSPUFTA(CPU) CPLD Version: 3.0
NSQ1F5ASPUA10A(Base) CPLD Version: 3.0
NSQ1F5SWUCTCA(Front) CPLD Version: 2.0
PowChip Version:2.0
Basic BootWare Version: 1.04
Extend BootWare Version: 1.04
HD PCB Version:Ver.A
[SubSlot 0]12GE+4FGE+16XGE (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0
<Sysname>
Using FTP to upgrade system software
4. Back up the running system software image and configuration file:
a. Display current software images and startup software images.
<Sysname> display boot-loader
Software images on slot 1:
Current software images:
cfa0:/main-cmw710-boot-R8513.bin
cfa0:/main-cmw710-system-R8513.bin
Main startup software images:
cfa0:/main-cmw710-boot-R8513.bin
cfa0:/main-cmw710-system-R8513.bin
Backup startup software images:
None
<Sysname>
b. Back up the current software images.
<Sysname> copy main-cmw710-boot-R8513.bin boot_backup.bin
<Sysname> copy main-cmw710-system-R8513.bin system_backup.bin
c. Specify boot_backup.bin and system_backup.bin as the backup startup image files.
<Sysname> boot-loader file boot cfa0:/boot_backup.bin system cfa0:/system_backup.bin backup
d. Execute the save command in any view to save the running configuration.
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
<Sysname>
e. Execute the dir command in user view to identify the system software image and configuration file names and verify that the flash memory has sufficient space for the new system software image.
<Sysname> dir
Directory of flash: (VFAT)
0 drw- - Nov 15 2022 10:35:02 WEB
1 -rw- 855 Nov 14 2022 17:56:08 cacert.crt
2 drw- - Nov 15 2022 15:06:50 context
3 -rw- 512539 Oct 25 2022 20:11:38 defaultfile.zip
4 drw- - Nov 15 2022 15:12:58 diagfile
5 drw- - Mar 29 2022 09:28:26 dpi
6 -rw- 10394091 Nov 10 2022 13:52:00 dq1.mdb
7 -rw- 735 Nov 07 2022 11:17:40 hostkey
8 -rw- 207949824 Nov 18 2022 14:14:20 l5000cn.ipe
9 -rw- 34035712 Nov 16 2022 11:29:46 l5000cnade-cmw710-boot-E1160P29.bin
10 -rw- 173906944 Nov 16 2022 11:29:48 l5000cnade-cmw710-system-E1160P29.bin
11 drw- - Mar 29 2022 19:48:06 lb
12 -rw- 111720 Nov 18 2022 14:26:45 lbispinfo_v1.5.tp
13 drw- - Nov 14 2022 11:30:20 license
14 -rw- 1645 Nov 14 2022 17:56:30 local.pfx
15 drw- - Mar 29 2022 09:41:20 logfile
16 drw- - Apr 02 2022 09:02:36 pcap
17 drw- - Apr 01 2022 16:11:10 pkey
18 drw- - Nov 14 2022 17:56:30 pki
19 -rw- 800 Nov 18 2022 14:26:39 rbmSwitchInfoFile.dat
20 drw- - Sep 30 2021 03:57:36 seclog
21 -rw- 591 Nov 07 2022 11:17:40 serverkey
22 -rw- 271151 Nov 14 2022 15:45:16 startup.cfg
23 -rw- 2144097 Nov 14 2022 15:45:16 startup.mdb
24 -rw- 587148 Nov 09 2022 10:58:44 test.mdb
25 drw- - Nov 07 2022 11:37:44 versionInfo
26 drw- - Jun 30 2022 17:42:08 webtmp
27 -rw- 8202 Nov 18 2022 14:17:42 zhu.cfg
28 -rw- 557271 Nov 18 2022 14:17:42 zhu.mdb
7455012 KB total (6224148 KB free)
<Sysname>
f. Execute the ftp command in user view to access the FTP server.
<Sysname> ftp 186.23.0.15
Press CTRL+C to abort.
Connected to 186.23.0.15 (186.23.0.15).
220 3Com 3CDaemon FTP Server Version 2.0
User (186.23.0.15:(none)): admin
331 User name ok, need password
Password:
230 User logged in
Remote system type is UNIX.
Using binary mode to transfer files.
ftp>
g. Execute the put command in FTP client view to upload the startup.cfg file to the FTP server.
ftp> put startup.cfg
227 Entering passive mode (186,23,0,15,26,3)
125 Using existing data connection
.
226 Closing data connection; File transfer successful.
3950 bytes sent in 0.001 seconds (4.13 Mbytes/s)
ftp>
5. Upgrade the system software:
a. Execute the get command in FTP client view to download the system software image file to the flash memory on the device.
ftp> get l5000cn.ipe
l5000cn.ipe already exists. Overwrite it? [Y/N]:y
227 Entering passive mode (186,23,0,15,220,177)
125 Using existing data connection
................................................................................................................................................................................................................................................................................................................................................................226 Closing data connection; File transfer successful.
207949824 bytes received in 22.808 seconds (8.69 Mbytes/s)
ftp>
b. Execute the quit command in FTP client view to return to user view.
ftp> quit
221 Service closing control connection
<Sysname>
c. Execute the boot-loader file command in user view to load the l5000cn.ipe file and specify it as the main image file at the next reboot.
<Sysname> boot-loader file flash:/l5000cn.ipe all main
Verifying the file flash:/l5000cn.ipe on slot 1...Done.
H3C SecPath L5060-G images in IPE:
l5000cnade-cmw710-boot-E1160P29.bin
l5000cnade-cmw710-system-E1160P29.bin
This command will set the main startup software images. Please do not reboot any MPU during the upgrade. Continue? [Y/N]:y
Add images to slot 1.
File flash:/l5000cnade-cmw710-boot-E1160P29.bin already exists on slot 1.
File flash:/l5000cnade-cmw710-system-E1160P29.bin already exists on slot 1.
Overwrite the existing files?[Y/N]:y
Decompressing file l5000cnade-cmw710-boot-E1160P29.bin to flash:/l5000cnade-cmw710-boot-E1160P29.bin...Done.
Decompressing file l5000cnade-cmw710-system-E1160P29.bin to flash:/l5000cnade-cmw710-system-E1160P29.bin...Done.
Verifying the file flash:/l5000cnade-cmw710-boot-E1160P29.bin on slot 1...Done.
Verifying the file flash:/l5000cnade-cmw710-system-E1160P29.bin on slot 1...Done.
The images that have passed all examinations will be used as the main startup software images at the next reboot on slot 1.
Decompression completed.
Do you want to delete flash:/l5000cn.ipe now? [Y/N]:n
<Sysname>
d. Execute the display boot-loader command in user view to verify that the file has been loaded.
<Sysname>display boot-loader
S Software images on slot 1:
Current software images:
flash:/l5000cnade-cmw710-boot-E1160P29.bin
flash:/l5000cnade-cmw710-system-E1160P29.bin
Main startup software images:
flash:/l5000cnade-cmw710-boot-E1160P29.bin
flash:/l5000cnade-cmw710-system-E1160P29.bin
Backup startup software images:
flash:/l5000cnade-cmw710-boot-E1160P29.bin
flash:/l5000cnade-cmw710-system-E1160P29.bin
<Sysname>
e. Execute the reboot command in user view to reboot the device.
<Sysname>reboot
Start to check configuration with next startup configuration file, please wait..
.......DONE!
Start to check configuration with next startup configuration file in Context con
text1, please wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
…omitted…
f. After the reboot is complete, execute the display version command to verify that the system software image is correct.
<Sysname> dis version
H3C Comware Software, Version 7.1.064, Ess 1160P29
Copyright (c) 2004-2022 New H3C Technologies Co., Ltd. All rights reserved.
H3C SecPath L5060-G uptime is 0 weeks, 0 days, 21 hours, 35 minutes
Last reboot reason: User reboot
Boot image: flash:/l5000cnade-cmw710-boot-E1160P29.bin
Boot image version: 7.1.064, Ess 1160P29
Compiled Oct 31 2022 14:00:00
System image: flash:/l5000cnade-cmw710-system-E1160P29.bin
System image version: 7.1.064, Ess 1160P29
Compiled Oct 31 2022 14:00:00
SLOT 1
CPU type: Multi-core CPU
DDR4 SDRAM Memory 32768M bytes
NSQ1F5MSPUFTA(CPU) PCB Version:Ver.A
NSQ1F5ASPUA10A(Base) PCB Version:Ver.A
NSQ1F5SWUCTCA(Front) PCB Version:Ver.B
NSQ1F5MSPUFTA(CPU) CPLD Version: 3.0
NSQ1F5ASPUA10A(Base) CPLD Version: 3.0
NSQ1F5SWUCTCA(Front) CPLD Version: 2.0
PowChip Version:2.0
Basic BootWare Version: 1.04
Extend BootWare Version: 1.04
HD PCB Version:Ver.A
[SubSlot 0]12GE+4FGE+16XGE (Hardware)Ver.A, (Driver)1.0, (Cpld)3.0
<Sysname>
Upgrading system software from the Web interface
CAUTION: · You can use the default account settings or create a new account to log in to the Web interface for the first time. This section uses the default account settings. For security purposes, if you use the default account settings, modify the default password or create a new account and delete the default account after the first login. · Do not perform any operation on the Web interface while the system is upgrading software. |
Table 6 describes the default settings for you to log in to the Web interface.
Table 6 Default login information
Login information | Default setting |
Username | admin |
Password | admin |
IP address of GigabitEthernet 1/0/0 | 186.23. 0.15/16 |
| NOTE: The default management Ethernet port varies by device model. In this example, the default management Ethernet port is GigabitEthernet 1/0/0. |
To upgrade the system software from the Web interface:
6. Use an Ethernet cable to connect the PC to an Ethernet port on the device. As a best practice, connect the PC to the management Ethernet port on the device.
7. Assign an IP address on the same subnet as the management port GigabitEthernet 1/0/0 to the PC.
In this example, assign 186.23.0.15 to the PC.
8. Launch the Web browser, and enter 186.23.0.15 in the address bar.
The Web login page appears.
9. Type the default username and password, and click Login.
10. Select System > Upgrade Center > Software Upgrade from the navigation tree.
Figure 1 Software upgrade page
11. Click Upgrade immediately on the Software Upgrade page.
12. Select the startup file to be used, and click OK.
Figure 2 Upgrade Immediately page
You can upgrade the BootWare from the CLI or BootWare menus.
Upgrading the BootWare from the CLI
Whether a .btw file is compressed together with an .ipe file depends on the device model and software release. Please check it with H3C technical support. This section describes only how to upgrade the BootWare from the CLI.
To upgrade the BootWare from the CLI:
13. Use FTP or TFTP to download or upload the new BootWare image file to the root directory of the storage medium on the device.
14. Execute the bootrom update command to upgrade the BootWare.
<System> bootrom update flash:/ 8042f109039122_v1.01.btw slot 1
This command will update bootrom file, Continue? [Y/N]:y
Now updating bootrom, please wait...
Updating basic bootrom!
Update basic bootrom success!
Updating extended bootrom!
Update extended bootrom success!
Update bootrom success!
<System>
15. Execute the reboot command to reboot the device.
Upgrading the BootWare from an Ethernet interface through TFTP/FTP
| NOTE: · To upgrade the BootWare from an Ethernet interface through TFTP/FTP, make sure the password recovery capability is enabled. · To enable the password recovery capability, execute the password-recovery enable command. To disable the password recovery capability, execute the undo password-recovery enable command. |
When the device starts up or reboots, the configuration terminal displays the following information:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start heavy memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing................................
Done.
****************************************************************************
* *
* H3C SecPath BootWare, Version 1.04 *
* *
****************************************************************************
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.
Compiled Date : Mar 4 2021
Memory Type : DDR4 SDRAM
Memory Size : 32768MB
Flash Size : 16MB
flash Size : 7296MB
CPLD0 Version : 3.0
CPLD1 Version : 3.0
CPLD2 Version : 2.0
PCB0 Version : Ver.A
PCB1 Version : Ver.A
PCB2 Version : Ver.B
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Press Ctrl + B immediately when the Press Ctrl+B to access EXTENDED-BOOTWARE MENU... message is displayed.
You can identify whether the password recovery capability is enabled in the output information.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
==========================<EXTENDED-BOOTWARE MENU>==========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Ctrl+C: Display Copyright
Enter your choice(0-9):
The menu description is as follows:
Option | Description |
<1> Boot System | Access the boot file. |
<2> Enter Serial SubMenu | Access the serial port submenu. |
<3> Enter Ethernet SubMenu | Access the Ethernet interface submenu. |
<4> File Control | Access the file control submenu. |
<5> Restore to Factory Default Configuration | Restore factory defaults. CAUTION: · For this operation to take effect, make sure the password recovery capability is disabled. · After you restore factory defaults, the system will delete the current configuration file and start with initial configuration. Use this feature with caution. |
<6> Skip Current System Configuration | Start the system with the current configuration skipped. This is a one-off operation and is typically used when a user forgets the password. NOTE: For this operation to take effect, make sure the password recovery capability is enabled. |
<7> BootWare Operation Menu | Access the BootWare operations submenu. |
<8> Skip Authentication for Console Login | Start the system without console port authentication. This is a one-off operation and is typically used when a user forgets the console password. NOTE: For this operation to take effect, make sure the password recovery capability is enabled. |
<9> Storage Device Operation | Access the storage control menu. |
<0> Reboot | Reboot the device. |
17. Press 7 in the BootWare menu to access the BootWare operations menu.
=========================<BootWare Operation Menu>==========================
|Note:the operating device is flash |
|<1> Backup Full BootWare |
|<2> Restore Full BootWare |
|<3> Update BootWare By Serial |
|<4> Update BootWare By Ethernet |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Table 8 BootWare operations menu
Option | Description |
<1> Backup Full BootWare | Back up complete BootWare. |
<2> Restore Full BootWare | Restore complete BootWare. |
<3> Update BootWare By Serial | Upgrade BootWare through the serial port. |
<4> Update BootWare By Ethernet | Upgrade BootWare through the Ethernet port. |
<0> Exit To Main Menu | Return to the BootWare main menu. |
18. Press 4 to access the BootWare operations Ethernet interface submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
Table 9 BootWare operations Ethernet submenu
Option | Description |
<1> Update Full BootWare | Upgrade complete BootWare. |
<2> Update Extend BootWare | Upgrade extended BootWare. |
<3> Update Basic BootWare | Upgrade basic BootWare. |
<4> Modify Ethernet Parameter | Edit Ethernet interface parameters. |
<0> Exit To Main Menu | Return to the BootWare main menu. |
19. Press 4 to enter the Ethernet interface configuration menu.
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :ftp
Load File Name :l5000cn.ipe
:
Target File Name :l5000cn.ipe
:
Server IP Address :186.23.0.15
Local IP Address :186.23.15.116
Subnet Mask :255.255.0.0
Gateway IP Address :186.23.0.1
FTP User Name :admin
FTP User Password :******
Field | Description |
'.' = Clear field | Press the dot (.) to clear the setting for a field. |
'-' = Go to previous field | Press the hyphen (-) to return to the previous field. |
Ctrl+D = Quit | Press Ctrl and D to exit the parameter configuration interface. |
Protocol (FTP or TFTP) | Transfer protocol, which can be FTP or TFTP. |
Load File Name | Name of the file to be downloaded. |
Target File Name | Name of the software image file. By default, the name is consistent with the downloaded file name. |
Server IP Address | IP address of the TFTP or FTP server. |
Local IP Address | Local IP address, which is the IP address of the Ethernet interface used for upgrade. |
Gateway IP Address | Gateway IP address. Configure the gateway IP address if the device and the FTP server do not belong to the same subnet. |
For example, to upgrade complete BootWare, press 1 in the BootWare operations Ethernet submenu.
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4): 1
Loading............Done!
418156 bytes downloaded!
Updating Basic BootWare? [Y/N]Y
Updating Basic BootWare...........Done!
Updating Extend BootWare? [Y/N]Y
Updating Extend BootWare...........Done!
===================<BOOTWARE OPERATION ETHERNET SUB-MENU>===================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-4):
After the upgrade completes, return to the BootWare main menu, and then press 0 to reboot the system.
Performing file management from the BootWare menu
Press 4 in the BootWare main menu to access the file control submenu. From this submenu, you can view all files in the flash memory, configure the startup file type, and delete files.
===============================<File CONTROL>===============================
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Image File type |
|<3> Set Bin File type |
|<4> Set Configuration File type |
|<5> Delete File |
|<6> Copy File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-6):
Option | Description |
<1> Display All File(s) | Displaying all files |
<2> Set Image File type | Configure the .ipe file type |
<3> Set Bin File type | Configure the .bin file type NOTE: The .bin file is decompressed from the .ipe file. |
<4> Set Configuration File type | Configure the configuration file type |
<5> Delete File | Delete files |
<6> Copy File | Copy file |
<0> Exit To Main Menu | Return to the BootWare main menu |
Displaying all files
Press 1 in the file control submenu to display all files
Display all file(s) in flash:
'M' = MAIN 'B' = BACKUP 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 642 Nov/18/2022 14:28:38 N/A flash:/.trash/.trashinfo |
|2 267 Apr/02/2022 09:48:26 N/A flash:/.trash/lb.lua_0001 |
|3 248 Apr/02/2022 09:50:54 N/A flash:/.trash/lb1.lua_0001 |
|4 207534080 Nov/09/2022 10:56:56 N/A flash:/.trash/l1000gcn.ipe_0001 |
|5 179872768 Oct/26/2022 11:13:38 N/A flash:/.trash/l1000gcn_ade.ipe_0|
|001 |
|6 17787904 Oct/26/2022 13:51:32 N/A flash:/.trash/l1000gcnade-unw710|
|-boot-f1160p1615.bin_0001 |
|7 162077696 Oct/26/2022 13:52:08 N/A flash:/.trash/l1000gcnade-unw710|
|-system-f1160p1615.bin_0001 |
|8 207145984 Oct/26/2022 14:05:28 N/A flash:/.trash/l5000gcn.ipe_0001 |
|9 747665 Nov/10/2022 13:52:00 N/A flash:/.trash/dq1.cfg_0001 |
|10 11851 Nov/09/2022 10:58:44 N/A flash:/.trash/test.cfg_0001 |
|11 120346 Nov/15/2022 15:21:26 N/A flash:/.trash/diag_sysname_20221|
|115-152025.tar.gz_0001 |
|12 800 Nov/18/2022 14:29:16 N/A flash:/rbmswitchinfofile.dat |
|13 111720 Nov/18/2022 14:26:44 N/A flash:/lbispinfo_v1.5.tp |
|14 271151 Nov/14/2022 15:45:16 N/A flash:/startup.cfg |
|15 2144097 Nov/14/2022 15:45:16 N/A flash:/startup.mdb |
|16 941 Jun/30/2022 17:41:56 N/A flash:/license/history/deviceid_|
|20220630174157.did |
|17 978 Oct/25/2022 20:11:54 N/A flash:/license/history/deviceid_|
|20221025201155.did |
|18 941 Sep/30/2021 03:57:36 N/A flash:/license/210235a2jnb20c000|
|008.did |
|19 941 Oct/25/2022 20:11:54 N/A flash:/license/210235a43rb20c000|
|008.did |
|20 965 Oct/27/2022 16:28:06 N/A flash:/license/210235a4g5b20c000|
…omitted…
============================================================================
===============================<File CONTROL>===============================
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Image File type |
|<3> Set Bin File type |
|<4> Set Configuration File type |
|<5> Delete File |
|<6> Copy File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-6):
Configuring the .ipe startup file type
20. Press 2 in the file control submenu to configure the startup file type:
'M' = MAIN 'B' = BACKUP 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 207949824 Nov/18/2022 14:14:20 N/A flash:/l5000cn.ipe |
|0 Exit |
============================================================================
21. Enter the number of the file to be edited, and then press Enter. Then, you can edit the file type.
Modify the file attribute:
============================================================================
|<1> +Main |
|<2> +Backup |
|<0> Exit |
============================================================================
Enter your choice(0-2):
22. Enter the number of the target file type. For example, to set the file type to main, enter 1.
Enter your choice(0-2):1
This operation may take several minutes. Please wait....
The file is exist,will you overwrite it? [Y/N]Y
Image file l5000cnade-cmw710-boot-E1160P29.bin is self-decompressing...
Saving file flash:/l5000cnade-cmw710-boot-E1160P29.bin .....................
......Done.
Image file l5000cnade-cmw710-system-E1160P29.bin is self-decompressing...
Saving file flash:/l5000cnade-cmw710-system-E1160P29.bin ...................
............................................................................
.........................................Done.
Set the file attribute success!
Configuring the .bin startup file type
Press 3 in the file control submenu to configure the startup file type:
'M' = MAIN 'B' = BACKUP 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 34035712 Nov/18/2022 14:35:02 M+B flash:/l5000cnade-cmw710-boot-e1|
|160p29.bin |
|2 173906944 Nov/18/2022 14:35:10 M+B flash:/l5000cnade-cmw710-system-|
|e1160p29.bin |
|0 Exit |
============================================================================
Note:Select .bin files. One but only one boot image and system image must
be included.
Enter file No.(Allows multiple selection):1
Enter another file No.(0-Finish choice):2
Enter another file No.(0-Finish choice):0 //0 indicates stopping file selection
You have selected:
flash:/l5000cnade-cmw710-boot-e1160p29.bin
flash:/l5000cnade-cmw710-system-e1160p29.bin
Modify the file attribute:
============================================================================
|<1>+Main |
|<2>+Backup |
|<0> Exit |
============================================================================
Enter your choice(0-2):1
This operation may take several minutes. Please wait....
Set the file attribute success!
Deleting files
23. Press 5 in the file control submenu to delete file:
Deleting the file in flash:
'M' = MAIN 'B' = BACKUP 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 642 Nov/18/2022 14:28:38 N/A flash:/.trash/.trashinfo |
|2 267 Apr/02/2022 09:48:26 N/A flash:/.trash/lb.lua_0001 |
|3 248 Apr/02/2022 09:50:54 N/A flash:/.trash/lb1.lua_0001 |
|4 207534080 Nov/09/2022 10:56:56 N/A flash:/.trash/l1000gcn.ipe_0001 |
|5 179872768 Oct/26/2022 11:13:38 N/A flash:/.trash/l1000gcn_ade.ipe_0|
|001 |
|6 17787904 Oct/26/2022 13:51:32 N/A flash:/.trash/l1000gcnade-unw710|
|-boot-f1160p1615.bin_0001 |
|7 162077696 Oct/26/2022 13:52:08 N/A flash:/.trash/l1000gcnade-unw710|
|-system-f1160p1615.bin_0001 |
|8 207145984 Oct/26/2022 14:05:28 N/A flash:/.trash/l5000gcn.ipe_0001 |
|9 747665 Nov/10/2022 13:52:00 N/A flash:/.trash/dq1.cfg_0001 |
|10 11851 Nov/09/2022 10:58:44 N/A flash:/.trash/test.cfg_0001 |
|11 120346 Nov/15/2022 15:21:26 N/A flash:/.trash/diag_sysname_20221|
|115-152025.tar.gz_0001 |
|12 800 Nov/18/2022 14:29:16 N/A flash:/rbmswitchinfofile.dat |
|13 111720 Nov/18/2022 14:26:44 N/A flash:/lbispinfo_v1.5.tp |
|14 271151 Nov/14/2022 15:45:16 N/A flash:/startup.cfg |
|15 2144097 Nov/14/2022 15:45:16 N/A flash:/startup.mdb |
|16 941 Jun/30/2022 17:41:56 N/A flash:/license/history/deviceid_|
|20220630174157.did |
|17 978 Oct/25/2022 20:11:54 N/A flash:/license/history/deviceid_|
|20221025201155.did |
|18 941 Sep/30/2021 03:57:36 N/A flash:/license/210235a2jnb20c000|
|008.did |
|19 941 Oct/25/2022 20:11:54 N/A flash:/license/210235a43rb20c000|
|008.did |
|20 965 Oct/27/2022 16:28:06 N/A flash:/license/210235a4g5b20c000|
|008.did |
…omitted…
|0 Exit |
============================================================================
Enter file No.:
24. Enter the number of the file to be deleted, and then press Enter. The system displays the following information if the file is deleted successfully:
Enter file No.:3
The file you selected is flash:/.trash/lb1.lua_0001,Delete it? [Y/N]Y
Deleting...Done.
Handling software upgrade failures
If a software upgrade fails, the system runs the old software version. To handle a software failure:
1. Check the physical ports for a loose or incorrect connection, and verify that the LEDs are reflecting the correct port status.
2. If you are using the console port for file transfer, check the HyperTerminal settings (including the baud rate and data bits) for any wrong setting.
3. Check the file transfer settings:
¡ If Xmodem is used, make sure the HyperTerminal and the console port are consistent in baud rate.
¡ If TFTP is used, you must enter the same TFTP server IP address, file name, and working directory as set on the TFTP server.
¡ If FTP is used, you must enter the same FTP server IP address, file name, working directory, and FTP username and password as set on the FTP server.
4. Check the FTP or TFTP server for incorrect settings.
5. Check that the flash memory has sufficient space for the upgrade file.
6. If the message "Something is wrong with the file" appears, check the file for file corruption.