16-Security

HomeSupportReference GuidesMIB CompanionH3C S6800 & S6860 Switch Series MIB Companion-Release 671x-6W10016-Security
01-HH3C-IKE-MONITOR-MIB
Title Size Download
01-HH3C-IKE-MONITOR-MIB 291.02 KB

Contents

HH3C-IKE-MONITOR-MIB· 3

About this MIB· 3

MIB file name· 3

Root object 3

Scalar objects· 3

hh3cIKEGlobalActiveTunnels· 3

hh3cIKEGlobalInOctets· 3

hh3cIKEGlobalInPkts· 3

hh3cIKEGlobalInDropPkts· 4

hh3cIKEGlobalInP2Exchgs· 4

hh3cIKEGlobalInP2ExchgRejects· 4

hh3cIKEGlobalInP2SaDelRequests· 4

hh3cIKEGlobalInNotifys· 5

hh3cIKEGlobalOutOctets· 5

hh3cIKEGlobalOutPkts· 5

hh3cIKEGlobalOutDropPkts· 5

hh3cIKEGlobalOutP2Exchgs· 6

hh3cIKEGlobalOutP2ExchgRejects· 6

hh3cIKEGlobalOutP2SaDelRequests· 6

hh3cIKEGlobalOutNotifys· 6

hh3cIKEGlobalInitTunnels· 7

hh3cIKEGlobalInitTunnelFails· 7

hh3cIKEGlobalRespTunnels· 7

hh3cIKEGlobalRespTunnelFails· 7

hh3cIKEGlobalAuthFails· 7

hh3cIKEGlobalNoSaFails· 8

hh3cIKEGlobalInvalidCookieFails· 8

hh3cIKEGlobalAttrNotSuppFails· 8

hh3cIKEGlobalNoProposalChosenFails· 8

hh3cIKEGlobalUnsportExchTypeFails· 8

hh3cIKEGlobalInvalidIdFails· 9

hh3cIKEGlobalInvalidProFails· 9

hh3cIKEGlobalCertTypeUnsuppFails· 9

hh3cIKEGlobalInvalidCertAuthFails· 9

hh3cIKEGlobalInvalidSignFails· 10

hh3cIKEGlobalCertUnavailableFails· 10

hh3cIKETrapGlobalCntl 10

hh3cIKETunnelStartTrapCntl 10

hh3cIKETunnelStopTrapCntl 11

hh3cIKENoSaTrapCntl 11

hh3cIKEEncryFailureTrapCntl 11

hh3cIKEDecryFailureTrapCntl 11

hh3cIKEInvalidProposalTrapCntl 11

hh3cIKEAuthFailTrapCntl 12

hh3cIKEInvalidCookieTrapCntl 12

hh3cIKEInvalidSpiTrapCntl 12

hh3cIKEAttrNotSuppTrapCntl 12

hh3cIKEUnsportExchTypeTrapCntl 12

hh3cIKEInvalidIdTrapCntl 13

hh3cIKEInvalidProtocolTrapCntl 13

hh3cIKECertTypeUnsuppTrapCntl 13

hh3cIKEInvalidCertAuthTrapCntl 13

hh3cIKEInvalidSignTrapCntl 13

hh3cIKECertUnavailableTrapCntl 14

hh3cIKEProposalAddTrapCntl 14

hh3cIKEProposalDelTrapCntl 14

hh3cIKEProposalNumber 14

hh3cIKEProposalSize· 14

hh3cIKEIdInformation· 15

hh3cIKEProtocolNum·· 15

hh3cIKECertInformation· 15

hh3cIKEMIBVersion· 15

Tabular objects· 16

hh3cIKETunnelTable· 16

hh3cIKETunnelStatTable· 18

Notifications· 20

hh3cIKETunnelStart 20

 


 

HH3C-IKE-MONITOR-MIB

About this MIB

Use this MIB to obtain IKE monitor information, including IKE tunnel, IKE trap, and IKE MIB version information.

MIB file name

hh3c-ike-monitor.mib

Root object

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).hh3c(25506).hh3cCommon(2).hh3cIKEMonitor(30)

Scalar objects

hh3cIKEGlobalActiveTunnels

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalActiveTunnels (1.3.6.1.4.1.25506.2.30.1.3.1)

read-only

Gauge32

Gauge32 (0..4294967295)

Number of currently active Phase-1 IKE Tunnels.

As per the MIB.

 

hh3cIKEGlobalInOctets

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInOctets (1.3.6.1.4.1.25506.2.30.1.3.2)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of octets received by all currently and previously active Phase-1 IKE Tunnels.

As per the MIB.

 

hh3cIKEGlobalInPkts

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInPkts (1.3.6.1.4.1.25506.2.30.1.3.3)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of packets received by all currently and previously active Phase-1 IKE Tunnels.

As per the MIB.

 

hh3cIKEGlobalInDropPkts

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInDropPkts (1.3.6.1.4.1.25506.2.30.1.3.4)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of inbound packets dropped by all currently and previously active Phase-1 IKE Tunnels.

As per the MIB.

 

hh3cIKEGlobalInP2Exchgs

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInP2Exchgs (1.3.6.1.4.1.25506.2.30.1.3.5)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 exchanges received by all currently and previously active Phase-1 IKE Tunnels.

As per the MIB.

 

hh3cIKEGlobalInP2ExchgRejects

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInP2ExchgRejects (1.3.6.1.4.1.25506.2.30.1.3.6)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 exchanges received and rejected by all currently and previously active Phase-1 IKE Tunnels.

As per the MIB.

 

hh3cIKEGlobalInP2SaDelRequests

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInP2SaDelRequests (1.3.6.1.4.1.25506.2.30.1.3.7)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 SA deletion requests received by all currently and previously active Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalInNotifys

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInNotifys (1.3.6.1.4.1.25506.2.30.1.3.8)

read-only

Counter32

Counter32 (0..4294967295)

Total number of notifications received by all Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalOutOctets

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalOutOctets (1.3.6.1.4.1.25506.2.30.1.3.9)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of octets sent by all currently and previously active Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalOutPkts

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalOutPkts (1.3.6.1.4.1.25506.2.30.1.3.10)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of packets sent by all currently and previously active Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalOutDropPkts

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalOutDropPkts (1.3.6.1.4.1.25506.2.30.1.3.11)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of outbound packets dropped by all currently and previously active Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalOutP2Exchgs

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalOutP2Exchgs (1.3.6.1.4.1.25506.2.30.1.3.12)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 exchanges sent by all currently and previously active Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalOutP2ExchgRejects

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalOutP2ExchgRejects (1.3.6.1.4.1.25506.2.30.1.3.13)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 exchanges sent and rejected by all currently and previously active Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalOutP2SaDelRequests

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalOutP2SaDelRequests (1.3.6.1.4.1.25506.2.30.1.3.14)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 SA deletion requests sent by all currently and previously active Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalOutNotifys

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalOutNotifys (1.3.6.1.4.1.25506.2.30.1.3.15)

read-only

Counter32

Counter32 (0..4294967295)

Total number of notifications sent by all Phase-1 IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalInitTunnels

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInitTunnels (1.3.6.1.4.1.25506.2.30.1.3.16)

read-only

Counter32

Counter32 (0..4294967295)

Total number of locally initiated IKE tunnels.

As per the MIB.

 

hh3cIKEGlobalInitTunnelFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInitTunnelFails (1.3.6.1.4.1.25506.2.30.1.3.17)

read-only

Counter32

Counter32 (0..4294967295)

Total number of IKE tunnels that were locally initiated but failed to activate.

As per the MIB.

 

hh3cIKEGlobalRespTunnels

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalRespTunnels (1.3.6.1.4.1.25506.2.30.1.3.18)

read-only

Counter32

Counter32 (0..4294967295)

Total number of IKE tunnels that were remotely initiated.

As per the MIB.

 

hh3cIKEGlobalRespTunnelFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalRespTunnelFails (1.3.6.1.4.1.25506.2.30.1.3.19)

read-only

Counter32

Counter32 (0..4294967295)

Total number of IKE tunnels that were remotely initiated but failed to activate.

As per the MIB.

 

hh3cIKEGlobalAuthFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalAuthFails (1.3.6.1.4.1.25506.2.30.1.3.20)

read-only

Counter32

Counter32 (0..4294967295)

Number of IKE authentication failures.

As per the MIB.

 

hh3cIKEGlobalNoSaFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalNoSaFails (1.3.6.1.4.1.25506.2.30.1.3.21)

read-only

Counter32

Counter32 (0..4294967295)

Number of Phase-2 SA deletion failures because of nonexistent Phase-1 SAs.

As per the MIB.

 

hh3cIKEGlobalInvalidCookieFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInvalidCookieFails (1.3.6.1.4.1.25506.2.30.1.3.22)

read-only

Counter32

Counter32 (0..4294967295)

Number of invalid cookie failures occurred during packet header checking.

As per the MIB.

 

hh3cIKEGlobalAttrNotSuppFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalAttrNotSuppFails (1.3.6.1.4.1.25506.2.30.1.3.23)

read-only

Counter32

Counter32 (0..4294967295)

Number of attributes-not-supported failures occurred during packet Transform payload checking.

Not supported

 

hh3cIKEGlobalNoProposalChosenFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalNoProposalChosenFails (1.3.6.1.4.1.25506.2.30.1.3.24)

read-only

Counter32

Counter32 (0..4294967295)

Number of no proposal chosen failures occurred during the packet Proposal payload checking.

As per the MIB.

 

hh3cIKEGlobalUnsportExchTypeFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalUnsportExchTypeFails (1.3.6.1.4.1.25506.2.30.1.3.25)

read-only

Counter32

Counter32 (0..4294967295)

Number of packet drops caused by unsupported exchange type.

As per the MIB.

 

hh3cIKEGlobalInvalidIdFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInvalidIdFails (1.3.6.1.4.1.25506.2.30.1.3.26)

read-only

Counter32

Counter32 (0..4294967295)

Number of invalid ID failures occurred during the packet ID payload checking.

As per the MIB.

 

hh3cIKEGlobalInvalidProFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInvalidProFails (1.3.6.1.4.1.25506.2.30.1.3.27)

read-only

Counter32

Counter32 (0..4294967295)

Number of invalid Protocol ID failures occurred during the packet Proposal payload checking.

As per the MIB.

 

hh3cIKEGlobalCertTypeUnsuppFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalCertTypeUnsuppFails (1.3.6.1.4.1.25506.2.30.1.3.28)

read-only

Counter32

Counter32 (0..4294967295)

Number of certificate type unsupported failures occurred during the packet ID payload checking.

As per the MIB.

 

hh3cIKEGlobalInvalidCertAuthFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInvalidCertAuthFails (1.3.6.1.4.1.25506.2.30.1.3.29)

read-only

Counter32

Counter32 (0..4294967295)

Number of invalid CA failures occurred during the packet ID payload checking.

Not supported

 

hh3cIKEGlobalInvalidSignFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalInvalidSignFails (1.3.6.1.4.1.25506.2.30.1.3.30)

read-only

Counter32

Counter32 (0..4294967295)

Number of invalid signature failures occurred during the packet HASH payload checking.

Not supported

 

hh3cIKEGlobalCertUnavailableFails

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEGlobalCertUnavailableFails (1.3.6.1.4.1.25506.2.30.1.3.31)

read-only

Counter32

Counter32 (0..4294967295)

Number of certificate unavailable failures occurred during the packet ID payload checking.

As per the MIB.

 

hh3cIKETrapGlobalCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKETrapGlobalCntl (1.3.6.1.4.1.25506.2.30.1.5.1)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable trap notifications for IKE events globally.

As per the MIB.

 

hh3cIKETunnelStartTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKETunnelStartTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.2)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKETunnelStart trap notifications.

As per the MIB.

 

hh3cIKETunnelStopTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKETunnelStopTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.3)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKETunnelStop trap notifications.

As per the MIB.

 

hh3cIKENoSaTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKENoSaTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.4)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKENoSa trap notifications.

As per the MIB.

 

hh3cIKEEncryFailureTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEEncryFailureTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.5)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEEncryFailure trap notifications.

As per the MIB.

 

hh3cIKEDecryFailureTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEDecryFailureTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.6)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEDecryFailure trap notifications.

As per the MIB.

 

hh3cIKEInvalidProposalTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEInvalidProposalTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.7)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEInvalidProposal trap notifications.

As per the MIB.

 

hh3cIKEAuthFailTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEAuthFailTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.8)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEAuthFail trap notifications.

As per the MIB.

 

hh3cIKEInvalidCookieTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEInvalidCookieTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.9)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEInvalidCookie trap notifications.

As per the MIB.

 

hh3cIKEInvalidSpiTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEInvalidSpiTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.10)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEInvalidSpi trap notifications.

As per the MIB.

 

hh3cIKEAttrNotSuppTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEAttrNotSuppTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.11)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEAttrNotSupp trap notifications.

As per the MIB.

 

hh3cIKEUnsportExchTypeTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEUnsportExchTypeTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.12)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEUnsportExchTypeTrapCntl trap notifications.

As per the MIB.

 

hh3cIKEInvalidIdTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEInvalidIdTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.13)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEInvalidId trap notifications.

As per the MIB.

 

hh3cIKEInvalidProtocolTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEInvalidProtocolTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.14)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEInvalidProtocol trap notifications.

As per the MIB.

 

hh3cIKECertTypeUnsuppTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKECertTypeUnsuppTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.15)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKECertTypeUnsupp trap notifications.

As per the MIB.

 

hh3cIKEInvalidCertAuthTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEInvalidCertAuthTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.16)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEInvalidCertAuth trap notifications.

As per the MIB.

 

hh3cIKEInvalidSignTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEInvalidSignTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.17)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEInvalidSign trap notifications.

As per the MIB.

 

hh3cIKECertUnavailableTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKECertUnavailableTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.18)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKECertUnavailable trap notifications.

As per the MIB.

hh3cIKEProposalAddTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEProposalAddTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.19)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEProposalAdd trap notifications.

As per the MIB.

hh3cIKEProposalDelTrapCntl

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEProposalDelTrapCntl (1.3.6.1.4.1.25506.2.30.1.5.20)

read-write

Hh3cTrapStatus

Integer32 (1,2)

Whether to enable hh3cIKEProposalDel trap notifications.

As per the MIB.

 

hh3cIKEProposalNumber

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEProposalNumber (1.3.6.1.4.1.25506.2.30.1.4.1)

accessible-for-notify

Integer32

Integer32 (0..2147483647)

Number of an IKE proposal in a trap notification.

As per the MIB.

 

hh3cIKEProposalSize

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEProposalSize (1.3.6.1.4.1.25506.2.30.1.4.2)

accessible-for-notify

Integer32

Integer32 (0..2147483647)

Number of IKE proposals in a trap notification.

As per the MIB.

 

hh3cIKEIdInformation

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEIdInformation (1.3.6.1.4.1.25506.2.30.1.4.3)

accessible-for-notify

DisplayString

OCTET STRING (1..255)

ID information in a trap notification.

As per the MIB.

 

hh3cIKEProtocolNum

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEProtocolNum (1.3.6.1.4.1.25506.2.30.1.4.4)

accessible-for-notify

Integer32

Integer32 (0..2147483647)

Protocol number in a trap notification.

As per the MIB.

 

hh3cIKECertInformation

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKECertInformation (1.3.6.1.4.1.25506.2.30.1.4.5)

accessible-for-notify

DisplayString

OCTET STRING (1..255)

Certificate information in a trap notification.

As per the MIB.

 

hh3cIKEMIBVersion

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKEMIBVersion (1.3.6.1.4.1.25506.2.30.1.7.1)

read-only

DisplayString

OCTET STRING (1..255)

Version information of the IKE MIB.

As per the MIB.

 

Tabular objects

hh3cIKETunnelTable

About this table

This table contains IKE tunnel information.

Support for operations

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

Columns

The table index is hh3cIKETunIndex.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKETunIndex (1.3.6.1.4.1.25506.2.30.1.1.1.1)

accessible-for-notify

Integer32

Integer32 (1..2147483647)

Index of a tunnel.

As per the MIB.

hh3cIKETunLocalType (1.3.6.1.4.1.25506.2.30.1.1.1.2)

read-only

Hh3cIKEIDType

Integer32 (0..11)

Type of the local ID of the tunnel.

As per the MIB.

hh3cIKETunLocalValue1 (1.3.6.1.4.1.25506.2.30.1.1.1.3)

read-only

Display String

OCTET STRING (1..255)

Value of the local ID of the tunnel.

For a local ID that exceeds 255 bytes, this object displays only the first 255 bytes of information. The complete ID information is displayed by hh3cIKETunLocalValue3.

hh3cIKETunLocalValue2 (1.3.6.1.4.1.25506.2.30.1.1.1.4)

read-only

Display String

OCTET STRING (1..255)

The second specification of the local end's IP address.

Not supported

hh3cIKETunLocalAddr (1.3.6.1.4.1.25506.2.30.1.1.1.5)

read-only

IPad dress

IPad dress

IP address of the tunnel local end.

Replaced by hh3cIKETunLocalInetAddr.

hh3cIKETunRemoteType (1.3.6.1.4.1.25506.2.30.1.1.1.6)

read-only

Hh3cIKEIDType

Integer32 (0..11)

Type of the remote ID of the tunnel.

As per the MIB.

hh3cIKETunRemoteValue1 (1.3.6.1.4.1.25506.2.30.1.1.1.7)

read-only

DisplayString

OCTET STRING (1..255)

Value of the remote ID of the tunnel.

For a remote ID that exceeds 255 bytes, this object displays only the first 255 bytes of information. The complete ID information is displayed by hh3cIKETunRemoteValue3.

hh3cIKETunRemoteValue2 (1.3.6.1.4.1.25506.2.30.1.1.1.8)

read-only

DisplayString

OCTET STRING (1..255)

The second specification of the remote end's IP address.

Not supported

hh3cIKETunRemoteAddr (1.3.6.1.4.1.25506.2.30.1.1.1.9)

read-only

IpAddress

OCTET STRING (4)

IP address of the tunnel remote end.

Replaced by hh3cIKETunRemoteInetAddr.

hh3cIKETunInitiator (1.3.6.1.4.1.25506.2.30.1.1.1.10)

read-only

INTEGER

Integer32 (1,2)

Initiator of the tunnel.

As per the MIB.

hh3cIKETunNegoMode (1.3.6.1.4.1.25506.2.30.1.1.1.11)

read-only

Hh3cIKENegoMode

Integer32 (2,4,32,128)

Negotiation mode of the IKE tunnel.

As per the MIB.

hh3cIKETunDiffHellmanGrp (1.3.6.1.4.1.25506.2.30.1.1.1.12)

read-only

Hh3cDiffHellmanGrp

Integer32 (0,1,2,5,14,24,2147483647)

DH group used in IKE Phase-1 negotiations.

As per the MIB.

hh3cIKETunEncryptAlgo (1.3.6.1.4.1.25506.2.30.1.1.1.13)

read-only

Hh3cEncryptAlgo

Integer32(0..14,128..131,2147483647)

Encryption algorithm used in IKE Phase-1 negotiations.

As per the MIB.

hh3cIKETunHashAlgo (1.3.6.1.4.1.25506.2.30.1.1.1.14)

read-only

Hh3cAuthAlgo

Integer32(0..5,128,2147483647)

Hash algorithm used in IKE Phase-1 negotiations.

As per the MIB.

hh3cIKETunAuthMethod (1.3.6.1.4.1.25506.2.30.1.1.1.15)

read-only

Hh3cIKEAuthMethod

Integer32(0..3,5,6)

Authentication method used in IKE Phase-1 negotiations.

As per the MIB.

hh3cIKETunLifeTime (1.3.6.1.4.1.25506.2.30.1.1.1.16)

read-only

Integer32

Integer32(1..2147483647)

Negotiated lifetime of the IKE tunnel.

Range from 1 to 2147483647

hh3cIKETunActiveTime (1.3.6.1.4.1.25506.2.30.1.1.1.17)

read-only

Integer32

Integer32(1..2147483648)

Active period of time of the IKE tunnel.

Range from 1 to 2147483647

hh3cIKETunRemainTime (1.3.6.1.4.1.25506.2.30.1.1.1.18)

read-only

Integer32

Integer32(1..2147483649)

Remaining lifetime of the IKE tunnel.

Range from 1 to 2147483647

hh3cIKETunTotalRefreshes (1.3.6.1.4.1.25506.2.30.1.1.1.19)

read-only

Counter32

Counter32 (0..4294967295)

Total number of IKE SA refreshes.

As per the MIB.

hh3cIKETunState (1.3.6.1.4.1.25506.2.30.1.1.1.20)

read-only

Hh3cIKETunnelState

Integer32(1,2)

State of the IKE tunnel.

As per the MIB.

hh3cIKETunDpdIntervalTime (1.3.6.1.4.1.25506.2.30.1.1.1.21)

read-only

Integer32

Integer32(1..2147483647)

Interval for sending DPD requests.

Not supported

hh3cIKETunDpdTimeOut (1.3.6.1.4.1.25506.2.30.1.1.1.22)

read-only

Integer32

Integer32(1..2147483648)

Timeout time of a DPD request.

Not supported

hh3cIKETunLocalInetAddrType (1.3.6.1.4.1.25506.2.30.1.1.1.23)

read-only

InetAddressType

Integer32(1,2)

IP address type of the tunnel local end.

As per the MIB.

hh3cIKETunLocalInetAddr (1.3.6.1.4.1.25506.2.30.1.1.1.24)

read-only

InetAddress

OCTET STRING (4)

IP address of the tunnel local end.

As per the MIB.

hh3cIKETunRemoteInetAddrType (1.3.6.1.4.1.25506.2.30.1.1.1.25)

read-only

InetAddressType

Integer32(1,2)

IP address type of the tunnel remote end.

As per the MIB.

hh3cIKETunRemoteInetAddr (1.3.6.1.4.1.25506.2.30.1.1.1.26)

read-only

InetAddress

OCTET STRING (4)

IP address of the tunnel remote end.

As per the MIB.

hh3cIKETunnelStatTable

About this table

This table contains IKE tunnel packet statistics.

Support for operations

Create

Edit/Modify

Delete

Read

Not supported

Not supported

Not supported

Supported

Columns

The table index is hh3cIKETunIndex.

Object (OID)

Access

Syntax

Value range

Description

Implementation

hh3cIKETunInOctets (1.3.6.1.4.1.25506.2.30.1.2.1.1)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of octets received by the tunnel.

As per the MIB.

hh3cIKETunInPkts (1.3.6.1.4.1.25506.2.30.1.2.1.2)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of packets received by the tunnel.

As per the MIB.

hh3cIKETunInDropPkts (1.3.6.1.4.1.25506.2.30.1.2.1.3)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of inbound packets dropped by the tunnel.

As per the MIB.

hh3cIKETunInP2Exchgs (1.3.6.1.4.1.25506.2.30.1.2.1.4)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 exchanges received by the tunnel.

As per the MIB.

hh3cIKETunInP2ExchgRejets (1.3.6.1.4.1.25506.2.30.1.2.1.5)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of inbound Phase-2 exchanges dropped by the tunnel.

As per the MIB.

hh3cIKETunInP2SaDelRequests (1.3.6.1.4.1.25506.2.30.1.2.1.6)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of requests received by the tunnel for deleting Phase-2 exchanges.

As per the MIB.

hh3cIKETunInP1SaDelRequests (1.3.6.1.4.1.25506.2.30.1.2.1.7)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of requests received by the tunnel for deleting Phase-1 SAs.

As per the MIB.

hh3cIKETunInNotifys (1.3.6.1.4.1.25506.2.30.1.2.1.8)

read-only

Counter32

Counter32 (0..4294967295)

Total number of notifications received by the tunnel.

As per the MIB.

hh3cIKETunOutOctets (1.3.6.1.4.1.25506.2.30.1.2.1.9)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of octets sent by the tunnel.

As per the MIB.

hh3cIKETunOutPkts (1.3.6.1.4.1.25506.2.30.1.2.1.10)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of packets sent by the tunnel.

As per the MIB.

hh3cIKETunOutDropPkts (1.3.6.1.4.1.25506.2.30.1.2.1.11)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of outbound packets dropped by the tunnel.

As per the MIB.

hh3cIKETunOutP2Exchgs (1.3.6.1.4.1.25506.2.30.1.2.1.12)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 exchanges sent by the tunnel.

As per the MIB.

hh3cIKETunOutP2ExchgRejects (1.3.6.1.4.1.25506.2.30.1.2.1.13)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of Phase-2 exchanges sent and rejected by the tunnel.

As per the MIB.

hh3cIKETunOutP2SaDelRequests (1.3.6.1.4.1.25506.2.30.1.2.1.14)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of requests sent by the tunnel for deleting Phase-2 SAs.

As per the MIB.

hh3cIKETunOutP1SaDelRequests (1.3.6.1.4.1.25506.2.30.1.2.1.15)

read-only

Counter64

Counter64 (0..18446744073709551615)

Total number of requests sent by the tunnel for deleting Phase-1 SAs.

As per the MIB.

hh3cIKETunOutNotifys (1.3.6.1.4.1.25506.2.30.1.2.1.16)

read-only

Counter32

Counter32 (0..4294967295)

Total number of notifications sent by the tunnel.

As per the MIB.

 

Notifications

The following information describes the notifications generated by HH3C-IKE-MONITOR-MIB.

hh3cIKETunnelStart

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.1

IKE tunnel created.

Informational

-

-

OFF

 

Description

This notification is generated when an IKE tunnel is created.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike tunnel-start command.

·     MIB: Set hh3cIKETunnelStartTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike tunnel-start command

·     MIB: Set hh3cIKETunnelStartTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.16 (hh3cIKETunLifeTime)

Lifetime of the IKE tunnel.

No

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKETunnelStop

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.2

IKE tunnel deleted.

Informational

-

-

OFF

 

Description

This notification is generated when an IKE tunnel is deleted.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike tunnel-stop command

·     MIB: Set hh3cIKETunnelStopTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike tunnel-stop command

·     MIB: Set hh3cIKETunnelStopTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.17 (hh3cIKETunActiveTime)

Active period of time of the tunnel.

No

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKENoSaFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.3

IKE tunnel received nonexistent SA.

Informational

-

-

OFF

 

Description

This notification is generated when an IKE tunnel receives a nonexistent SA.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike no-sa-failure command.

·     MIB: Set hh3cIKENoSaTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike no-sa-failure command.

·     MIB: Set hh3cIKENoSaTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEEncryFailFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.4

IKE tunnel encryption failure.

Informational

-

-

OFF

 

Description

This notification is generated when an IKE tunnel has an encryption failure.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike encrypt-failure command.

·     MIB: Set hh3cIKEEncryFailureTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike encrypt-failure command.

·     MIB: Set hh3cIKEEncryFailureTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEDecryFailFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.5

IKE tunnel decryption failure.

Informational

-

-

OFF

 

Description

This notification is generated when an IKE tunnel has a decryption failure.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike decrypt-failure command.

·     MIB: Set hh3cIKEDecryFailureTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike decrypt-failure command.

·     MIB: Set hh3cIKEDecryFailureTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEInvalidProposalFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.6

Invalid proposal received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an invalid proposal is received during an IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike invalid-proposal command.

·     MIB: SET hh3cIKEInvalidProposalTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike invalid-proposal command.

·     MIB: SET hh3cIKEInvalidProposalTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEAuthFailFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.7

IKE Phase-1 authentication failure.

Informational

-

-

OFF

 

Description

This notification is generated when the IKE Phase-1 authentication fails.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike auth-failure command.

·     MIB: Set hh3cIKEAuthFailTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike auth-failure command.

·     MIB: Set hh3cIKEAuthFailTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEInvalidCookieFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.8

Invalid cookie received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an invalid cookie is received during an IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike invalid-cookie command.

·     MIB: Set hh3cIKEInvalidCookieTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike invalid-cookie command.

·     MIB: Set hh3cIKEInvalidCookieTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEAttrNotSuppFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.9

Attributes not supported received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an unsupported attribute is received during IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike attr-not-support command.

·     MIB: Set hh3cIKEAttrNotSuppTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike attr-not-support command.

·     MIB: Set hh3cIKEAttrNotSuppTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEUnsportExchTypeFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.10

Unsupported exchange type received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an unsupported exchange type is received during the IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike unsupport-exch-type command.

·     MIB: Set hh3cIKEUnsportExchTypeTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike unsupport-exch-type command.

·     MIB: Set hh3cIKEUnsportExchTypeTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEInvalidIdFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.11

Invalid ID received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an invalid ID is received during an IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike invalid-id command.

·     MIB: Set hh3cIKEInvalidIdTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike invalid-id command.

·     MIB: Set hh3cIKEInvalidIdTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.3 (hh3cIKEIdInformation)

ID of the IKE negotiation.

No

DisplayString

OCTET STRING (SIZE (0..255))

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEInvalidProtocolFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.12

IKE tunnel protocol error.

Informational

-

-

OFF

 

Description

This notification is generated when a protocol related error occurs during the processing for an IKE tunnel.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike invalid-protocol command.

·     MIB: Set hh3cIKEInvalidProtocolTrapCntl to enabled(1)

OFF

·     CLI: Use the undo snmp-agent trap enable ike invalid-protocol command.

·     MIB: Set hh3cIKEInvalidProtocolTrapCntl to disabled(2)

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.4 (hh3cIKEProtocolNum)

IKE protocol number

No

Integer32

-2147483648..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKECertTypeUnsuppFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.13

Unsupported certificate type received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an unsupported certificate type is received during an IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike cert-type-unsupport command.

·     MIB: Set hh3cIKECertTypeUnsuppTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike cert-type-unsupport command.

·     MIB: Set hh3cIKECertTypeUnsuppTrapCntl to disabled(2).

 

Objects

OID (object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.5 (hh3cIKECertInformation)

Certificate information

No

DisplayString

OCTET STRING (SIZE (0..255))

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEInvalidCertAuthFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.14

Invalid certificate received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an invalid certificate is received during an IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike invalid-cert-auth command.

·     MIB: Set hh3cIKEInvalidCertAuthTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike invalid-cert-auth command.

·     MIB: Set hh3cIKEInvalidCertAuthTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.5 (hh3cIKECertInformation)

Certificate information.

No

DisplayString

OCTET STRING (SIZE (0..255))

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEInvalidSignFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.15

Invalid signature received in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when an invalid signature is received during an IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike invalid-sign command.

·     MIB: Set hh3cIKEInvalidSignTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike invalid-sign command.

·     MIB: Set hh3cIKEInvalidSignTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.5 (hh3cIKECertInformation)

Certificate information.

No

DisplayString

OCTET STRING (SIZE (0..255))

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKECertUnavailableFailure

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.16

Certificate unavailable in IKE Phase-1 negotiation.

Informational

-

-

OFF

 

Description

This notification is generated when a certificate is unavailable during an IKE Phase-1 SA negotiation.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike cert-unavailable command.

·     MIB: Set hh3cIKECertUnavailableTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike cert-unavailable command.

·     MIB: Set hh3cIKECertUnavailableTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.1.1.5 (hh3cIKETunLocalAddr)

IP address of the tunnel local end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.9 (hh3cIKETunRemoteAddr)

IP address of the tunnel remote end.

No

IpAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.5 (hh3cIKECertInformation)

Certificate information.

No

DisplayString

OCTET STRING (SIZE (0..255))

1.3.6.1.4.1.25506.2.30.1.1.1.1 (hh3cIKETunIndex)

Index of a tunnel.

Yes

Integer32

1..2147483647

1.3.6.1.4.1.25506.2.30.1.1.1.23 (hh3cIKETunLocalInetAddrType)

IP address type of the tunnel local end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.24 (hh3cIKETunLocalInetAddr)

IP address of the tunnel local end.

No

InetAddress

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.25 (hh3cIKETunRemoteInetAddrType)

IP address type of the tunnel remote end.

No

InetAddressType

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.1.1.26 (hh3cIKETunRemoteInetAddr)

IP address of the tunnel remote end.

No

InetAddress

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEProposalAdd

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.17

IKE proposal added.

Informational

-

-

OFF

 

Description

This notification is generated when an IKE proposal is added.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike proposal-add command.

·     MIB: Set hh3cIKEProposalAddTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike proposal-add command.

·     MIB: Set hh3cIKEProposalAddTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.4.1 (hh3cIKEProposalNumber)

IKE proposal number.

No

Integer32

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.2 (hh3cIKEProposalSize)

Number of IKE proposals.

No

Integer32

Standard MIB values.

 

Recommended action

No action is required.

hh3cIKEProposalDel

Basic information

OID

Event

Type

Severity

Recovery notification

Default status

1.3.6.1.4.1.25506. 2.30.1.6.1.18

IKE proposal deleted.

Informational

-

-

OFF

 

Description

This notification is generated when an IKE proposal is deleted.

Status control

ON

·     CLI: Use the snmp-agent trap enable ike proposal-delete command.

·     MIB: Set hh3cIKEProposalDelTrapCntl to enabled(1).

OFF

·     CLI: Use the undo snmp-agent trap enable ike proposal-delete command.

·     MIB: Set hh3cIKEProposalDelTrapCntl to disabled(2).

 

Objects

OID(object name)

Description

Index

Type

Value range

1.3.6.1.4.1.25506.2.30.1.4.1 (hh3cIKEProposalNumber)

IKE proposal number.

No

Integer32

Standard MIB values.

1.3.6.1.4.1.25506.2.30.1.4.2 (hh3cIKEProposalSize)

Number of IKE proposals.

No

Integer32

Standard MIB values.

 

Recommended action

No action is required.

 

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网