Login
- Table of Contents
- Related Documents
-
| Title | Size | Download |
|---|---|---|
| 03-HH3C-ENTITY-EXT-MIB | 287.01 KB |
Contents
hh3cEntityExtECCParityAlarmStatus
hh3cEntityExtTemperatureThresholdNotification
hh3cEntityExtCpuUsageThresholdNotfication
hh3cEntityExtMemUsageThresholdNotification
hh3cEntityExtCriticalTemperatureThresholdNotification
hh3cEntityExtTemperatureNormal
hh3cEntityExternalAlarmRecover
hh3cEntityExtCpuUsageThresholdRecover
hh3cEntityExtMemUsageThresholdRecover
hh3cEntityExtMemAllocatedFailed
hh3cEntityExtMemUsageThresholdOverTrap
hh3cEntityExtMemUsageThresholdRecoverTrap
HH3C-ENTITY-EXT-MIB
About this MIB
Use this MIB to obtain entity extended information. Access this MIB to monitor specific entity data, which facilitates management and monitoring on the product through network management.
Products supporting this MIB must first support the ENTITY-MIB MIB.
The following tables show the relationship between the entity extended properties and device entities. Implementation varies by product.
|
Entity |
hh3cEntityExtAdminStatus (R/W) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
No |
|
port |
Yes |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtOperStatus (R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
power Supply |
Yes |
|
fan |
Yes |
|
sensor |
No |
|
module |
Yes |
|
port |
Yes |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtStandbyStatus (R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
Yes |
|
sensor |
No |
|
module |
Yes |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtAlarmLight (R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
No |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtCpuUsage (R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes(Only support the Module Level1) |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtCpuUsageThreshold (R/W) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes(Only support the Module Level1) |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtMemUsage (R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes(Only support the Module Level1) |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtMemUsageThreshold(R/W) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes(Only support the Module Level1) |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtMemSize (R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes(Only support the Module Level1) |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtUpTime (R) |
|
chassis |
Yes |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
No |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtTemperature (R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
Yes |
|
fan |
Yes |
|
sensor |
Yes |
|
module |
Yes |
|
port |
No |
|
stack |
No |
|
other |
Yes |
|
unknown |
No |
|
Entity |
hh3cEntityExtTemperatureThreshold(R/W) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
Yes |
|
fan |
Yes |
|
sensor |
Yes |
|
module |
Yes |
|
port |
No |
|
stack |
No |
|
other |
Yes |
|
unknown |
No |
|
Entity |
hh3cEntityExtVoltage(R) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
No |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtVoltageLowThreshold(R/W) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
No |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtVoltageHighThreshold(R/W) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
No |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtCriticalTemperatureThreshold(R/W) |
|
chassis |
No |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
Yes |
|
module |
No |
|
port |
No |
|
stack |
No |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtMacAddress (R) |
|
chassis |
Yes |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
No |
|
port |
No |
|
stack |
Yes |
|
other |
No |
|
unknown |
No |
|
Entity |
hh3cEntityExtErrorStatus (R) |
|
chassis |
No |
|
backplane |
Yes |
|
container |
Yes |
|
powerSupply |
Yes |
|
fan |
Yes |
|
sensor |
Yes |
|
module |
No |
|
port |
Yes |
|
stack |
No |
|
other |
Yes |
|
unknown |
Yes |
|
Entity |
hh3cEntityExtManuSerialNum (R) |
|
chassis |
Yes |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes |
|
port |
No |
|
cpu |
No |
|
Entity |
hh3cEntityExtManuBuildInfo (R) |
|
chassis |
Yes |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes |
|
port |
No |
|
cpu |
No |
|
Entity |
hh3cEntityExtMacAddressCount (R) |
|
chassis |
Yes |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes |
|
port |
Yes |
|
cpu |
No |
|
Entity |
hh3cEntityExtManuBOM (R) |
|
chassis |
Yes |
|
backplane |
No |
|
container |
No |
|
powerSupply |
No |
|
fan |
No |
|
sensor |
No |
|
module |
Yes |
|
port |
No |
|
cpu |
No |
|
Entity (R/W: Read/Write) |
POWERSUPPLY |
FAN |
CHASSIS |
CONTAINER |
MODULE |
PORT |
CPU |
|
hh3cEntityExtAdminStatus (R/W) |
|
|
|
|
|
Yes |
|
|
hh3cEntityExtOperStatus (R) |
Yes |
Yes |
|
|
Yes |
Yes |
|
|
hh3cEntityExtStandbyStatus (R) |
|
Yes |
|
|
Yes |
|
|
|
hh3cEntityExtAlarmLight (R) |
|
|
|
|
|
|
|
|
hh3cEntityExtCpuUsage (R) |
|
|
|
|
Yes |
|
|
|
hh3cEntityExtCpuUsageThreshold (R/W) |
|
|
|
|
Yes |
|
|
|
hh3cEntityExtMemUsage (R) |
|
|
|
|
Yes |
|
|
|
hh3cEntityExtMemUsageThreshold(R/W) |
|
|
|
|
Yes |
|
|
|
hh3cEntityExtMemSize (R) |
|
|
|
|
Yes |
|
|
|
hh3cEntityExtUpTime (R) |
|
|
Yes |
|
|
|
|
|
hh3cEntityExtTemperature (R) |
|
|
|
|
|
|
|
|
hh3cEntityExtTemperatureThreshold (R/W) |
|
|
|
|
|
|
|
|
hh3cEntityExtVoltage (R) |
|
|
|
|
|
|
|
|
hh3cEntityExtVoltageLowThreshold (R/W) |
|
|
|
|
|
|
|
|
hh3cEntityExtVoltageHighThreshold (R/W) |
|
|
|
|
|
|
|
|
hh3cEntityExtCriticalTemperatureThreshold |
|
|
|
|
|
|
|
|
hh3cEntityExtMacAddress |
|
|
Yes |
|
|
|
|
|
hh3cEntityExtErrorStatus |
|
|
|
|
|
|
|
|
|
NOTE: · Yes indicates that the extended property is supported. · If the read operation returns no such name/instance, the object is not supported in the current entity instance. |
MIB file name
hh3c-entity-ext.mib
Root object
iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).hh3c(25506).hh3cCommon(2).hh3cEntityExtend(6)
Scalar objects
hh3cEntityExtTrapDescription
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtTrapDescription (1.3.6.1.4.1.25506.2.6.2.1.1) |
accessible-for-notify |
SnmpAdminString |
OCTET STRING(0..255) |
Detailed information of the trap. |
As per the MIB. |
hh3cEntityExtECCParityAlarmStatus
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtECCParityAlarmStatus (1.3.6.1.4.1.25506.2.6.2.1.2) |
accessible-for-notify |
INTEGER |
other(1), l1cache(2), l2cache(3), sdram(4), mac(5), tcam(6), ingressbuffer(7), egressbuffer(8), lpm(9), controlmemory(10) |
Resource type of the chip on which an ECC error or parity check error occurs. |
As per the MIB. |
hh3cEntityExtSFPInvalidInDays
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtSFPInvalidInDays (1.3.6.1.4.1.25506.2.6.2.1.3) |
accessible-for-notify |
Integer32 |
Standard MIB values. |
Remaining valid days of a transceiver module. |
As per the MIB. |
hh3cEntityExtFirstTrapTime
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtFirstTrapTime (1.3.6.1.4.1.25506.2.6.2.1.4) |
accessible-for-notify |
TimeTicks |
Standard MIB values. |
Time when a trap is sent for the first time. |
As per the MIB. |
Tabular objects
hh3cEntityExtStateTable
About this table
This table contains information about entity extended properties, including administrative status, operation status, CPU usage, CPU usage threshold, memory usage, and memory usage threshold.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Supported |
Not supported |
Supported |
Columns
The table index is hh3cEntityExtPhysicalIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.1.1.1.1) |
accessible-for-notify |
Integer32 |
Integer32 (1..2147483647) |
The index for this entry, which is the same with the value of entPhysicalIndex in ENTITY-MIB. |
As per the MIB. |
|
hh3cEntityExtAdminStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.2) |
read-write |
Hh3cAdminState |
notSupported(1), locked(2), shuttingDown(3), unlocked(4) |
Administrative status for this object. |
Does not support notSupported(1) or shuttingDown(3). · locked—The resource is disabled. · shuttingDown—The resource is available only the current entity. · unlocked—The resource is not disabled. |
|
hh3cEntityExtOperStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.3) |
read-only |
Hh3cOperState |
notSupported(1), disabled(2), enabled(3), dangerous(4) |
Operation status |
· disabled—The resource is not operable. · enabled—The resource or part of the resource is operable. |
|
hh3cEntityExtStandbyStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.4) |
read-only |
Hh3cStandbyStatus |
notSupported(1), hotStandby(2), coldStandby(3), providingService(4) |
Standby status. |
· notStandby—The resource is not providing services, but it can provide services without being initialized. The resource in this status also contains information about the resources being backed up. · coldStandby—The resource is not providing services, but it can operate. · providingService—The resource is providing services. |
|
hh3cEntityExtAlarmLight (1.3.6.1.4.1.25506.2.6.1.1.1.1.5) |
read-only |
Hh3cAlarmStatus |
BITS { notSupported(0), underRepair(1), critical(2), major(3), minor(4), alarmOutstanding(5), warning(6), indeterminate(7) } |
Alarm status for this entity. |
Not supported. An integer indicates an alarm status as follows: ¡ 0—notSupported. This indicates that none of the subsequent statuses is present. ¡ 1—underRepair. This indicates that the resource is being repaired. ¡ 2—critical. This indicates that one or multiple critical faults occurred on the resource. ¡ 3—major. This indicates that one or multiple major faults occurred on the resource. ¡ 4—minor. This indicates that one or multiple minor faults occurred on the resource. ¡ 5—alarmOutstanding. This indicates that one or multiple alarms occurred on the resource and might cause system interruption. ¡ 6—warning. This indicates that one or multiple warning faults occurred on the resource. ¡ 7—indeterminate. This indicates that one or multiple indeterminate faults occurred on the resource. |
|
hh3cEntityExtCpuUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.6) |
read-only |
Integer32 |
Integer32 (0..100) |
CPU usage for this entity. The statistics interval for CPU usage is 5 seconds. |
As per the MIB. |
|
hh3cEntityExtCpuUsageThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.7) |
read-write |
Integer32 |
Integer32 (0..100) |
CPU usage alarm threshold in percentage. Value range: 1 to 100. |
As per the MIB. |
|
hh3cEntityExtMemUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.8) |
read-only |
Integer32 |
Integer32 (0..100) |
Memory usage for this entity in percentage. |
As per the MIB. |
|
hh3cEntityExtMemUsageThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.9) |
read-write |
Integer32 |
Integer32 (0..100) |
Memory usage alarm threshold in percentage. |
As per the MIB. |
|
hh3cEntityExtMemSize (1.3.6.1.4.1.25506.2.6.1.1.1.1.10) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Memory size for this entity, in bytes. The memory is a 32-bit wide memory. |
As per the MIB. |
|
hh3cEntityExtUpTime (1.3.6.1.4.1.25506.2.6.1.1.1.1.11) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
Uptime for the entity., in seconds. |
As per the MIB. |
|
hh3cEntityExtTemperature (1.3.6.1.4.1.25506.2.6.1.1.1.1.12) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
Temperature of the entity. |
Implementation varies by product. The value 65535 indicates that the object is not supported. |
|
hh3cEntityExtTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.13) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Temperature of the entity. |
Implementation varies by product. The value 65535 indicates that the object is not supported. |
|
hh3cEntityExtVoltage (1.3.6.1.4.1.25506.2.6.1.1.1.1.14) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
Voltage for the entity. |
Implementation varies by product. |
|
hh3cEntityExtVoltageLowThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.15) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Low-voltage threshold for the entity. |
Implementation varies by product. |
|
hh3cEntityExtVoltageHighThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.16) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
High-voltage threshold for the entity. |
Implementation varies by product. |
|
hh3cEntityExtCriticalTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.17) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Critical high-temperature threshold for the entity. |
Implementation varies by product. The value 65535 indicates that the object is not supported. |
|
hh3cEntityExtMacAddress (1.3.6.1.4.1.25506.2.6.1.1.1.1.18) |
read-only |
MacAddress |
OCTET STRING (6) |
MAC address of the entity. |
If the type of the entity is stack, the value of this object is bridge MAC address of the current device. If this object is not supported in the current entity instance, the value of this object is fixed at 00.00.00.00.00.00. |
|
hh3cEntityExtErrorStatus (1.3.6.1.4.1.25506.2.6.1.1.1.1.19) |
read-only |
INTEGER |
notSupported(1), |
Alarm status for the entity, which is a supplement to hh3cEntityExtOperStatus. |
· notSupported(1)—The entity does not support this object. · normal(2)—The entity is normal. For ports, the object does not differentiate 10 Mbps, 100 Mbps, 1000 Mbps, duplex or half duplex ports. For fans, power supplies, cards, SFP ports, and stack ports, the object indicates they are normal. · postFailure(3)—The entity fails during POST. · entityAbsent(4)—The entity is absent. · poeError(11)—A power supply fault occurs on the PoE port. · stackError(21)—An issue occurs on the stack port during the stacking process. · stackPortBlocked(22)—The stack port is in standby status in the resilient daisy chain. · stackPortFailed(23)—The stacking process fails on a stack port after the stacking is enabled on the stack port. · sfpRecvError(31)—A fault occurs in the inbound direction of an SFP port. · sfpSendError(32)—A fault occurs in the outbound direction of an SFP port. · sfpBothError(33)—A fault occurs in both the inbound and outbound directions of an SFP port. · fanError(41)—A fan fault is present. · psuError(51)—A power supply fault is present. · rpsError(61)—An RPS fault is present. · moduleFaulty(71)— A card fault is present. · sensorError(81)—A sensor fault is present. · hardwareFaulty(91)—A hardware fault occurs on the entity. |
|
hh3cEntityExtCpuMaxUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.20) |
read-only |
Integer32 |
Integer32 (0..100) |
Peak CPU usage during the most recent 1-minute interval. |
As per the MIB. |
|
hh3cEntityExtLowerTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.21) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Low-temperature threshold for the entity. |
Implementation varies by product. The value 65535 indicates that the object is not supported. |
|
hh3cEntityExtShutdownTemperatureThreshold (1.3.6.1.4.1.25506.2.6.1.1.1.1.22) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Shutdown temperature threshold. Notifies and shuts down the device when the threshold is reached. |
Implementation varies by product. The value 65535 indicates that the object is not supported. |
|
hh3cEntityExtPhyMemSize (1.3.6.1.4.1.25506.2.6.1.1.1.1.23) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Memory size for this entity, in bytes. The memory is a 32-bit wide memory. |
As per the MIB. |
|
hh3cEntityExtPhyCpuFrequency (1.3.6.1.4.1.25506.2.6.1.1.1.1.24) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
CPU frequency of the entity, in MHz. |
Implementation varies by product. |
|
hh3cEntityExtFirstUsedDate (1.3.6.1.4.1.25506.2.6.1.1.1.1.25) |
read-only |
DateAndTime |
OCTET STRING (8) |
The date used for the first on the entity. |
Implementation varies by product. |
|
hh3cEntityExtCpuAvgUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.26) |
read-only |
Integer32 |
Integer32 (0..100) |
Average CPU usage for the entity during a time period. |
As per the MIB. |
|
hh3cEntityExtMemAvgUsage (1.3.6.1.4.1.25506.2.6.1.1.1.1.27) |
read-only |
Integer32 |
Integer32 (0..100) |
Average memory usage for the entity during a time period. |
As per the MIB. |
|
hh3cEntityExtMemType (1.3.6.1.4.1.25506.2.6.1.1.1.1.28) |
read-only |
OCTET STRING |
OCTET STRING (0..64) |
Memory type for the entity. |
As per the MIB. |
|
hh3cEntityExtCriticalLowerTemperatureThreshold(1.3.6.1.4.1.25506.2.6.1.1.1.1.29) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Critical high-temperature threshold for the entity. Notifies and shuts down the device when the threshold is reached. |
Implementation varies by product. |
|
hh3cEntityExtShutdownLowerTemperatureThreshold(1.3.6.1.4.1.25506.2.6.1.1.1.1.30) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Low-temperature shutdown temperature threshold. Notifies and shuts down the device when the threshold is reached. |
Implementation varies by product. |
|
hh3cEntityExtCpuUsageRecoverThreshold(1.3.6.1.4.1.25506.2.6.1.1.1.1.31) |
read-write |
Integer32 |
Integer32 (0..100) |
CPU usage recovery threshold for the entity. |
Not supported |
|
hh3cEntityExtMemSizeRev (1.3.6.1.4.1.25506.2.6.1.1.1.1.32) |
read-only |
Counter64 |
Counter64 (0..18446744073709551615) |
Memory size for this entity, in bytes. The memory is a 64-bit wide memory. |
As per the MIB. |
|
hh3cEntityExtCpuUsageIn1Minute(1.3.6.1.4.1.25506.2.6.1.1.1.1.33) |
read-only |
Integer32 |
Integer32 (0..100) |
Average CPU usage for the entity during the most recent 1-minute interval. |
As per the MIB. |
|
hh3cEntityExtCpuUsageIn5Minutes(1.3.6.1.4.1.25506.2.6.1.1.1.1.34) |
read-only |
Integer32 |
Integer32 (0..100) |
Average CPU usage for the entity during the most recent 5-minute interval. |
As per the MIB. |
hh3cEntityExtManuTable
About this table
This table contains manufacturing information about device entities.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cEntityExtManuPhysicalIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtManuPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.2.1.1.1) |
accessible-for-notify |
PhysicalIndex |
Integer32 (1..2147483647) |
Entity index. |
As per the MIB. |
|
hh3cEntityExtManuSerialNum (1.3.6.1.4.1.25506.2.6.1.2.1.1.2) |
read-only |
SnmpAdminString |
OCTET STRING (0..255) |
Serial number of the entity. |
As per the MIB. |
|
hh3cEntityExtManuBuildInfo (1.3.6.1.4.1.25506.2.6.1.2.1.1.3) |
read-only |
SnmpAdminString |
OCTET STRING (0..255) |
Version of the entity. |
As per the MIB. |
|
hh3cEntityExtManuBOM (1.3.6.1.4.1.25506.2.6.1.2.1.1.4) |
read-only |
SnmpAdminString |
OCTET STRING (0..255) |
BOM number of the entity. |
As per the MIB. |
|
hh3cEntityExtMacAddressCount (1.3.6.1.4.1.25506.2.6.1.2.1.1.5) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
MAC address count for the entity. |
As per the MIB. |
hh3cEntityExtPowerTable
About this table
This table contains power information about all entities on the device.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Supported |
Not supported |
Supported |
Columns
The table index is hh3cEntityExtPowerPhysicalIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtPowerPhysicalIndex (1.3.6.1.4.1.25506.2.6.1.3.1.1.1) |
accessible-for-notify |
PhysicalIndex |
Integer32 (1..2147483647) |
Entity index for the power supply. |
As per the MIB. |
|
hh3cEntityExtNominalPower (1.3.6.1.4.1.25506.2.6.1.3.1.1.2) |
read-only |
Gauge32 |
Gauge32 (0..4294967295) |
Rated power for the entity, in milliwatts. |
As per the MIB. |
|
hh3cEntityExtCurrentPower (1.3.6.1.4.1.25506.2.6.1.3.1.1.3) |
read-only |
Gauge32 |
Gauge32 (0..4294967295) |
Current power for the entity, in milliwatts. |
As per the MIB. |
|
hh3cEntityExtAveragePower (1.3.6.1.4.1.25506.2.6.1.3.1.1.4) |
read-write |
Gauge32 |
Gauge32 (0..4294967295) |
Average power consumed by the entity, in milliwatts. The value 0 is the only valid value, indicating that the system clears the existing records and restarts the power statistics. The other values for this object will not take effect. |
As per the MIB. |
|
hh3cEntityExtPeakPower (1.3.6.1.4.1.25506.2.6.1.3.1.1.5) |
read-write |
Integer32 |
Integer32 (-2147483648..2147483647) |
Maximum power for the entity, in milliwatts. The value 0 is the only valid value, indicating that the system clears the existing records and restarts the power statistics. The other values for this object will not take effect. |
As per the MIB. |
hh3cProcessTable
About this table
This table contains process information.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cProcessID.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cProcessID (1.3.6.1.4.1.25506.2.6.1.4.1.1.1) |
read-only |
Unsigned32 |
Unsigned32 (0..4294967295) |
Process ID. |
As per the MIB. |
|
hh3cProcessName (1.3.6.1.4.1.25506.2.6.1.4.1.1.2) |
read-only |
DisplayString |
OCTET STRING (1..32) |
Process name. |
As per the MIB. |
|
hh3cProcessUtil5Min (1.3.6.1.4.1.25506.2.6.1.4.1.1.3) |
read-only |
Unsigned32 |
Unsigned32 (0..100) |
CPU usage of the process during a 5-minute interval. |
As per the MIB. |
hh3cEntityExtVoltageTable
About this table
This table contains information about voltage sensors.
Support for operations
|
Create |
Edit/Modify |
Delete |
Read |
|
Not supported |
Not supported |
Not supported |
Supported |
Columns
The table index is hh3cEntityExtPhysicalIndex.
|
Object (OID) |
Access |
Syntax |
Value range |
Description |
Implementation |
|
hh3cEntityExtCurrentVoltage (1.3.6.1.4.1.25506.2.6.1.5.1.1.1) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
Current voltage for the entity, in milliwatts. |
Implementation varies by product. |
|
hh3cEntityExtNominalVoltage (1.3.6.1.4.1.25506.2.6.1.5.1.1.2) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
Rated voltage for the entity, in milliwatts. |
Implementation varies by product. |
|
hh3cEntityExtVoltageState (1.3.6.1.4.1.25506.2.6.1.5.1.1.3) |
read-only |
INTEGER |
normal(0), |
Voltage status of the entity. |
Implementation varies by product. |
|
hh3cEntityExtVoltageMajorLowThreshold (1.3.6.1.4.1.25506.2.6.1.5.1.1.4) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
Low-temperature warning threshold. |
Implementation varies by product. |
|
hh3cEntityExtVoltageFatalLowThreshold (1.3.6.1.4.1.25506.2.6.1.5.1.1.5) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
Low-temperature fatal threshold. |
Implementation varies by product. |
|
hh3cEntityExtVoltageMajorHighThreshold (1.3.6.1.4.1.25506.2.6.1.5.1.1.6) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
High-temperature warning threshold. |
Implementation varies by product. |
|
hh3cEntityExtVoltageFatalHighThreshold (1.3.6.1.4.1.25506.2.6.1.5.1.1.7) |
read-only |
Integer32 |
Integer32 (-2147483648..2147483647) |
High-temperature fatal threshold. |
Implementation varies by product. |
Notifications
The following information describes the notifications included in the HH3C-ENTITY-EXT-MIB module.
hh3cEntityExtTemperatureThresholdNotification
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.1 |
Temperature of the entity higher than the threshold. |
Error |
Major |
N/A |
ON |
Description
This notification is generated when the temperature of the entity exceeds the upper limit.
Status control
This notification cannot be disabled.
Objects
|
OID (object) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature) |
Temperature of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.13 (hh3cEntityExtTemperatureThreshold) |
Temperature threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
Recommended action
To resolve the issue:
1. Verify that the temperature of the environment is normal. Execute the display environment command to obtain temperature information, including the current temperature and the temperature thresholds.
2. Identify the reason why the temperature exceeded the upper limit.
3. Verify that the temperature has dropped back to the normal.
4. If the issue persists, contact H3C Support.
hh3cEntityExtCpuUsageThresholdNotfication
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.4 |
CPU usage of the entity higher than the threshold. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.25(hh3cEntityExtCpuUsageThresholdRecover) |
ON |
Description
This notification is generated when the CPU usage of the entity exceeds the threshold. The notification is sent every 60 seconds till the alarm is cleared.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.6 (hh3cEntityExtCpuUsage) |
CPU usage of the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.7 (hh3cEntityExtCpuUsageThreshold) |
CPU usage threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.31 (hh3cEntityExtCpuUsageRecoverThreshold) |
CPU usage recovery threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime) |
Timestamp at which the notification is sent for the first time. |
N |
TimeTicks |
Standard MIB values. |
Recommended action
To resolve the issue:
1. If the alarm is automatically cleared, no action is required.
2. If the alarm cannot be automatically cleared, contact H3C Support.
hh3cEntityExtMemUsageThresholdNotification
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.5 |
Memory usage of the entity higher than the threshold. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.26(hh3cEntityExtMemUsageThresholdRecover) |
ON |
Description
This notification is generated when the total memory size is less than 4 GB and the memory usage of the entity exceeds hh3cEntityExtMemUsageThreshold (memory usage threshold). The notification is sent every 60 seconds till the alarm is cleared.
If the total memory size is equal to or greater than 4 GB, an hh3cEntityExtMemUsageThresholdOverTrap notification is generated when the memory usage exceeds hh3cEntityExtMemUsageThreshold.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage) |
Memory usage of the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold) |
Memory usage threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.10 (hh3cEntityExtMemSize) |
Memory size of the entity. |
N |
Unsigned32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
|
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime) |
Timestamp at which the notification is sent for the first time. |
N |
TimeTicks |
Standard MIB values. |
Recommended action
To resolve the issue:
1. If the alarm is automatically cleared, no action is required.
2. If the alarm cannot be automatically cleared, contact H3C Support.
hh3cEntityExtCriticalTemperatureThresholdNotification
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.8 |
Temperature of the entity higher than the critical high-temperature threshold. |
Error |
Critical |
N/A |
ON |
Description
This notification is generated when the temperature of the entity exceeded the critical high-temperature threshold. The notification is sent every 80 seconds till the alarm is cleared.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature) |
Temperature of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.17 (hh3cEntityExtCriticalTemperatureThreshold) |
Critical high-temperature threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
Recommended action
To resolve the issue:
1. Verify that the temperature of the environment is normal. Execute the display environment command to obtain temperature information, including the current temperature and the temperature thresholds.
2. Identify the reason why the temperature exceeded the critical high-temperature threshold.
3. Verify that the temperature has dropped back to the normal.
4. If the issue persists, contact H3C Support.
hh3cEntityInsert
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.12 |
Entity installation. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the entity is installed to the device.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.47.1.1.1.1.2 (entPhysicalDescr) |
Description of the entity. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.3 (hh3cEntityExtOperStatus) |
Operation status of the entity. |
N |
Hh3cOperState |
notSupported(1) disabled(2) enabled(3) dangerous(4) |
This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.
Recommended action
No action is required.
hh3cEntityRemove
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.13 |
Entity removal. |
Error |
Minor |
1.3.6.1.4.1.25506.2.6.2.0.12(hh3cEntityInsert) |
ON |
Description
This notification is generated when the entity is removed from the device.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.2.1.47.1.1.1.1.2 (entPhysicalDescr) |
Description of the entity. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.3 (hh3cEntityExtOperStatus) |
Operation status of the entity. |
N |
Hh3cOperState |
notSupported(1) disabled(2) enabled(3) dangerous(4) |
This table does not contain indexes. For information about the index or indexes of a MIB object instance in an SNMP variable binding, see the section for that MIB object.
Recommended action
To resolve the issue:
1. If the entity was removed from the device, no action is required.
2. If the entity was not removed, verify that the entity is installed correctly.
3. If the issue persists, contact H3C Support.
hh3cEntityExtFaultAlarmOn
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.16 |
Error occurrence on the entity. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.16(hh3cEntityExtFaultAlarmOff) |
ON |
Description
This notification is generate when an error occurs on the entity.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName) |
Entity name. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus) |
Alarm status for the entity. |
N |
INTEGER |
notSupported(1) normal(2) postFailure(3) entityAbsent(4) poeError(11) stackError(21) stackPortBlocked(22) stackPortFailed(23) sfpRecvError(31) sfpSendError(32) sfpBothError(33 fanError(41) psuError(51) rpsError(61) moduleFaulty(71) sensorError(81) hardwareFaulty(91) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
Recommended action
To resolve the issue:
1. Verify that the entity is installed correctly.
2. If the issue persists, contact H3C Support.
hh3cEntityExtFaultAlarmOff
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.17 |
Error clearance. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the entity recovers from the faulty state.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName) |
Entity name. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.19 (hh3cEntityExtErrorStatus) |
Alarm status for the entity. |
N |
INTEGER |
notSupported(1) normal(2) postFailure(3) entityAbsent(4) poeError(11) stackError(21) stackPortBlocked(22) stackPortFailed(23) sfpRecvError(31) sfpSendError(32) sfpBothError(33 fanError(41) psuError(51) rpsError(61) moduleFaulty(71) sensorError(81) hardwareFaulty(91) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
Recommended action
No action is required.
hh3cEntityExtTemperatureLower
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.20 |
Temperature of the entity lower than the low-temperature threshold. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.22(hh3cEntityExtTemperatureNormal) |
ON |
Description
This notification is generated when the temperature of the entity decreases below the low-temperature threshold.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName) |
Entity name. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature) |
Temperature of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.21 (hh3cEntityExtLowerTemperatureThreshold) |
Low-temperature threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
Recommended action
To resolve the issue:
1. Verify that the temperature of the environment is normal. Execute the display environment command to obtain temperature information, including the current temperature and the temperature thresholds.
2. Identify the reason why the temperature dropped below the lower limit.
3. Verify that the temperature has increased to the normal.
4. If the issue persists, contact H3C Support.
hh3cEntityExtTemperatureTooUp
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.21 |
Temperature of the entity higher than the shutdown temperature threshold. |
Error |
Critical |
1.3.6.1.4.1.25506.2.6.2.0.22(hh3cEntityExtTemperatureNormal) |
ON |
Description
This notification is generated when the temperature of the entity exceeds the shutdown temperature threshold. The notification is sent every 80 seconds till the alarm is cleared.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName) |
Entity name. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature) |
Temperature of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.22 (hh3cEntityExtShutdownTemperatureThreshold) |
Shutdown temperature threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
Recommended action
To resolve the issue:
1. Verify that the temperature of the environment is normal. Execute the display environment command to obtain temperature information, including the current temperature and the temperature thresholds.
2. Identify the reason why the temperature exceeded the shutdown temperature threshold.
3. Verify that the temperature has dropped back to the normal.
4. If the issue persists, contact H3C Support.
hh3cEntityExtTemperatureNormal
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.22 |
Temperature of the entity back to normal. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the temperature of the entity recovers from the abnormal status.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName) |
Entity name. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.12 (hh3cEntityExtTemperature) |
Temperature of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.21 (hh3cEntityExtLowerTemperatureThreshold) |
Low-temperature threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.13 (hh3cEntityExtTemperatureThreshold) |
Temperature threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
Recommended action
No action is required.
hh3cEntityExternalAlarmOccur
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.23 |
Error on a peripheral of the entity. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.24(hh3cEntityExternalAlarmRecover) |
ON |
Description
This notification is generated when an error occurs on the peripheral of the entity.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName) |
Entity name. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
Recommended action
To resolve the issue:
1. Verify that the entity is installed correctly.
2. If the issue persists, contact H3C Support.
hh3cEntityExternalAlarmRecover
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.24 |
A peripheral of the entity back to normal. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the peripheral of the entity recovers from the faulty state.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.2.1.47.1.1.1.1.7 (entPhysicalName) |
Entity name. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
Recommended action
No action is required.
hh3cEntityExtCpuUsageThresholdRecover
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.25 |
Recovery of the CPU usage from an alarm threshold. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the CPU usage of the entity recovers from the abnormal state.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.6 (hh3cEntityExtCpuUsage) |
CPU usage of the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.7 (hh3cEntityExtCpuUsageThreshold) |
CPU usage threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.31 (hh3cEntityExtCpuUsageRecoverThreshold) |
CPU usage recovery threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime) |
Timestamp at which the notification is sent for the first time. |
N |
TimeTicks |
Standard MIB values. |
Recommended action
No action is required.
hh3cEntityExtMemUsageThresholdRecover
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.26 |
Recovery of the memory usage from an alarm threshold. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the memory usage of the entity recovers from the abnormal state.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage) |
Memory usage of the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold) |
Memory usage threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.10 (hh3cEntityExtMemSize) |
Memory size of the entity. |
N |
Unsigned32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
|
1.3.6.1.4.1.25506.2.6.2.1.4 (hh3cEntityExtFirstTrapTime) |
Timestamp at which the notification is sent for the first time. |
N |
TimeTicks |
Standard MIB values. |
Recommended action
No action is required.
hh3cEntityExtMemAllocatedFailed
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.27 |
Memory allocation request failure. |
Informational |
Major |
N/A |
ON |
Description
This notification is generated when memory allocation for the entity failed.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.2.1.1 (hh3cEntityExtTrapDescription) |
Description of the notification. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
Recommended action
To resolve the issue, contact H3C Support.
hh3cEntityExtECCParityAlarm
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.28 |
ECC parity check error. |
Informational |
Major |
N/A |
ON |
Description
This notification is generated when an ECC parity check error occurs on the entity.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.2.1.2 (hh3cEntityExtECCParityAlarmStatus) |
Status of ECC parity check for the entity |
N |
INTEGER |
other(1) l1cache(2) l2cache(3) sdram(4) mac(5) tcam(6) ingressbuffer(7) egressbuffer(8) lpm(9) controlmemory(10) |
|
1.3.6.1.4.1.25506.2.6.2.1.1 (hh3cEntityExtTrapDescription) |
Description of the entity. |
N |
SnmpAdminString |
OCTET STRING (SIZE (0..255)) |
Recommended action
To resolve the issue, contact H3C Support.
hh3cEntityExtMemUsageThresholdOverTrap
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.35 |
Continuous notifications of memory usage exceeding the threshold. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.36(hh3cEntityExtMemUsageThresholdRecoverTrap) |
ON |
Description
This notification is generated when the total memory size of the entity is equal to or greater than 4 GB and the memory usage of the entity exceeds hh3cEntityExtMemUsageThreshold (memory usage threshold). The notification is sent every 60 seconds till the alarm is cleared.
If the total memory size is less than 4 GB, an hh3cEntityExtMemUsageThresholdNotification notification is generated when the memory usage exceeds hh3cEntityExtMemUsageThreshold.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage) |
Memory usage of the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold) |
Memory usage threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.32 (hh3cEntityExtMemSizeRev) |
Memory size of the entity. |
N |
Counter64 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
Recommended action
To resolve the issue:
1. If the alarm is automatically cleared, no action is required.
2. If the alarm cannot be automatically cleared, contact H3C Support.
hh3cEntityExtMemUsageThresholdRecoverTrap
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.36 |
Recovery of the memory usage from an alarm threshold. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the memory usage of the entity recovers from the abnormal state.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.8 (hh3cEntityExtMemUsage) |
Memory usage of the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.9 (hh3cEntityExtMemUsageThreshold) |
Memory usage threshold for the entity. |
N |
Integer32 |
0..100 |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.32 (hh3cEntityExtMemSizeRev) |
Memory size of the entity. |
N |
Counter64 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.2 (hh3cEntityExtAdminStatus) |
Administrative status of the entity. |
N |
Hh3cAdminState |
notSupported(1) locked(2) shuttingDown(3) unlocked(4)} |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.5 (hh3cEntityExtAlarmLight) |
Alarm status of the entity. |
N |
Hh3cAlarmStatus |
BITS { notSupported(0) underRepair(1) critical(2) major(3) minor(4) alarmOutstanding(5) warning(6) indeterminate(7) } |
Recommended action
No action is required.
hh3cEntityExtVoltageNormal
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.37 |
Recovery of the voltage from an alarm threshold. |
Recovery |
N/A |
N/A |
ON |
Description
This notification is generated when the voltage of the entity recovers from the abnormal state.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage) |
Voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage) |
Rated voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.4 (hh3cEntityExtVoltageMajorLowThreshold) |
Low-voltage threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.6 (hh3cEntityExtVoltageMajorHighThreshold) |
High-voltage threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
Recommended action
hh3cEntityExtVoltageLower
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.38 |
Voltage of the entity lower than the low-voltage threshold. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.37(hh3cEntityExtVoltageNormal) |
ON |
Description
This notification is generated when the voltage of the entity drops below the low-voltage threshold.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage) |
Voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage) |
Rated voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.4 (hh3cEntityExtVoltageMajorLowThreshold) |
Low-voltage threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
Recommended action
To resolve the issue:
1. Verify that the power system of the device is normal.
2. If the issue persists, contact H3C Support.
hh3cEntityExtVoltageTooLow
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.39 |
Voltage of the threshold lower than critical low-voltage threshold. |
Error |
Critical |
1.3.6.1.4.1.25506.2.6.2.0.37(hh3cEntityExtVoltageNormal) |
ON |
Description
This notification is generated when the voltage of the entity drops below the critical low-voltage threshold. The notification is sent every 80 seconds till the alarm is cleared.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage) |
Voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage) |
Rated voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.5 (hh3cEntityExtVoltageFatalLowThreshold) |
Critical low-voltage threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
Recommended action
To resolve the issue:
1. Verify that the power system of the device is normal.
2. If the issue persists, contact H3C Support.
hh3cEntityExtVoltageHigher
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.40 |
Voltage of the entity higher than the high-voltage threshold. |
Error |
Major |
1.3.6.1.4.1.25506.2.6.2.0.37(hh3cEntityExtVoltageNormal) |
ON |
Description
This notification is generated when the voltage of the entity increases above the high-voltage threshold.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage) |
Voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage) |
Rated voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.6 (hh3cEntityExtVoltageMajorHighThreshold) |
High-voltage threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
Recommended action
To resolve the issue:
1. Verify that the power system of the device is normal.
2. If the issue persists, contact H3C Support.
hh3cEntityExtVoltageTooHigh
Basic information
|
OID |
Event |
Type |
Severity |
Recovery notification |
Default status |
|
1.3.6.1.4.1.25506.2.6.2.0.41 |
Voltage of the entity higher than the critical high-voltage threshold. |
Error |
Critical |
1.3.6.1.4.1.25506.2.6.2.0.37(hh3cEntityExtVoltageNormal) |
ON |
Description
This notification is generated when the voltage of the entity increases over the critical high-voltage threshold. The notification is sent every 80 seconds till the alarm is cleared.
Status control
This notification cannot be disabled.
Objects
|
OID (object name) |
Description |
Index |
Type |
Value range |
|
1.3.6.1.4.1.25506.2.6.1.1.1.1.1 (hh3cEntityExtPhysicalIndex) |
Entity index. |
Y |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.1 (hh3cEntityExtCurrentVoltage) |
Voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.2 (hh3cEntityExtNominalVoltage) |
Rated voltage of the entity. |
N |
Integer32 |
Standard MIB values. |
|
1.3.6.1.4.1.25506.2.6.1.5.1.1.7 (hh3cEntityExtVoltageFatalHighThreshold) |
Critical high-voltage threshold for the entity. |
N |
Integer32 |
Standard MIB values. |
Recommended action
To resolve the issue:
1. Verify that the power system of the device is normal.
2. If the issue persists, contact H3C Support.
