About the H3C S5150-EI command references

Fundamentals Command Reference

Covers the commands for logging in to and setting up an S5150-EI switch.

This command reference includes:

·     CLI (command privilege settings and CLI management commands).

·     RBAC.

·     Logging in to the switch.

·     FTP and TFTP.

·     File system management.

·     Configuration file management.

·     Software upgrade.

·     Emergency shell.

·     Device management.

·     Tcl.

·     Python.

IRF Command Reference

Covers the commands for configuring the H3C proprietary Intelligent Resilient Framework (IRF) technology features. It covers planning the switch roles in the IRF fabric, connecting the IRF links, and detecting and maintaining the IRF fabric.

Layer 2—LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network.

This command reference includes:

·     Ethernet interface.

·     Loopback, null, and inloopback interfaces.

·     Bulk interface configuration.

·     MAC address table and MAC Information.

·     Ethernet link aggregation.

·     Port isolation.

·     Spanning tree.

·     Loop detection.

·     VLAN (including VLAN, super VLAN, private VLAN, and voice VLAN).

·     MVRP.

·     QinQ.

·     VLAN mapping.

·     LLDP.

Layer 3—IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, and ARP.

This command reference includes:

·     ARP (including gratuitous ARP, proxy ARP, and ARP snooping).

·     IP addressing.

·     DHCP.

·     DNS.

·     Basic IP forwarding.

·     IDRP.

·     IP performance optimization.

·     UDP helper.

·     IPv6 basics.

·     DHCPv6.

Layer 3—IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy-based routing.

This command reference includes:

·     Basic IP routing.

·     Static routing.

·     RIP.

·     OSPF.

·     Policy-based routing.

·     IPv6 static routing.

·     RIPng.

·     OSPFv3.

·     IPv6 policy-based routing.

·     Routing policy.

IP Multicast Command Reference

Covers the commands for Layer 2 IPv4 multicast protocols (including IGMP snooping, PIM snooping, and multicast VLAN) and Layer 2 IPv6 multicast protocols (including MLD snooping, IPv6 PIM snooping, and IPv6 multicast VLAN).

This command reference includes:

·     IGMP snooping.

·     PIM snooping.

·     Multicast VLAN.

·     MLD snooping.

·     IPv6 PIM snooping.

·     IPv6 multicast VLAN.

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency.

This command reference includes:

·     ACL.

·     QoS (including QoS policy, priority mapping, GTS and rate limit, congestion management, congestion avoidance, and aggregate CAR).

·     Time range.

·     Data buffer.

Security Command Reference

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, and MFF).

This command reference includes:

·     AAA.

·     802.1X.

·     MAC authentication.

·     Portal.

·     Port security.

·     User profile.

·     Password control.

·     Keychain.

·     Public key management.

·     PKI.

·     IPsec and IKE.

·     SSH.

·     SSL.

·     Attack detection and prevention.

·     TCP attack prevention.

·     IP source guard.

·     ARP attack protection.

·     ND attack defense.

·     MFF.

·     Crypto engine.

·     FIPS.

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery.

This command reference includes:

·     Ethernet OAM.

·     CFD.

·     DLDP.

·     Smart Link.

·     Monitor Link.

·     BFD.

·     Track.

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity.

This command reference includes:

·     System maintenance and debugging (ping, tracert, and system debugging).

·     NQA.

·     NTP and SNTP.

·     PoE.

·     SNMP.

·     RMON.

·     NETCONF.

·     CWMP.

·     EAA.

·     Process monitoring and maintenance.

·     Mirroring (including both port and traffic mirroring).

·     sFlow.

·     Information center.

·     Packet capture.

OpenFlow Command Reference

Covers the commands for configuring OpenFlow.