Country / Region
- Products and Solutions
- Industry Solutions
- Services
- Support
- Training & Certification
- Partners
- About Us
- Contact Sales
- Become a Partner
-
Login
Country / Region
Products and SolutionsSMB ProductsWirelessProductsWireless ProductsWireless Peripheral ProductsPOEPoE Injector EWPAM1HPOEPoE Injector EWPAM1HPOE
Model | EWPAM1HPOE |
Dimensions(L,W,H) | 107.3mm X 56.0mm X 34.5mm |
Weight | 157g |
AC Power Cord | 80cm, deliver according to country or area |
Input | 100-240Vac, 1.0A, 50/60Hz |
POE Output | 30.25W, 55V±2% @0.55A |
Power Pins | 4, 5 (+) and 7, 8 (-) |
Connectors | Shielded RJ-45, EIA 568A and 568B |
Data Rates | 100/1000/2500Mbps |
Operating Temperature | -10℃ to 45℃ |
Operating Humidity | 10% to 90%, non-condensation |
Storage Temperature | -40℃ to 85℃ |
Reliability | MTBF: 200,000 hrs @ 25ºC |
Operating Altitude | Up to 5000 meters |
Surge Protection (both PoE port and Power port) | EN61000-4-5 Perfomance B Common Mode 4KV Difference Mode 2KV |
Weather Rating | IP41 |
Inrush Current | 30A MAX, at 115Vac, Cold Start 60A MAX, at 230Vac, Cold Start |
Average active efficiency | ≥85% （230Vac） |
No-load power consumption | 0.5W |
Output Ripple | <200mV |
AC Connector | IEC-320 C6 |
Certifications | CE, CB, FCC, CCC |
The following contents are complex, and it is recommended to browse on PC.
Enter c.h3c.com.cn on the PC browser and operate according to the page to synchronize to the PC and continue browsing.
Continue by mobile
