Contents

Microsegmentation commands· 1

display microsegment 1

extcommunity-type microsegment-id· 2

member 2

microsegment 3

microsegment enable· 4

microsegment subnet-match· 5

 

Microsegmentation commands

display microsegment

Use display microsegment to display the configuration and status of microsegments.

Syntax

display microsegment [ microsegment-id | name microsegment-name ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

microsegment-id: Specifies a microsegment by its ID in the range of 1 to 65535.

name microsegment-name: Specifies a microsegment by its name, a case-insensitive string of 1 to 32 characters.

Usage guidelines

If you do not specify any parameters, this command displays summary information and status information about all microsegments.

Examples

# Display the configuration of microsegment 1.

<Sysname> display microsegment 1

Microsegment ID    : 1

Microsegment name  : micseg1

  IPv4 member:

    192.168.56.0/24

  IPv6 member:

    10:10::/64

# Display summary information and status information about all microsegments.

<Sysname> display microsegment

Microsegment status   : Enabled

Subnet matching method: Longest

Total microsegments   : 2

Microsegment list     :

  Microsegment ID  Members  Microsegment name

  12345            3        abc

  32789            5        xyz

Table 1 Command output

Field	Description
Subnet matching method	Subnet matching method.

‌

extcommunity-type microsegment-id

Use extcommunity-type microsegment-id to set the microsegment extended community attribute.

Use undo extcommunity-type microsegment-id to restore the default.

Syntax

extcommunity-type microsegment-id microsegment-type-value

undo extcommunity-type microsegment-id

Default

The microsegment extended community value is 83ff (hexadecimal).

Views

BGP instance view

Predefined user roles

network-admin

Parameters

microsegment-type-value: Specifies the microsegment extended community value in the range of 0 to ffff (hexadecimal).

Usage guidelines

BGP carries microsegment IDs in an extended community attribute and advertises microsegment settings to a peer through the extended community attribute.

To avoid attribute conflicts, you can execute this command to modify the microsegment extended community attribute value.

Examples

# In BGP instance view, set the microsegment extended community value to 0x5688.

<Sysname> system-view

[Sysname] bgp 200

[Sysname-bgp-default] extcommunity-type microsegment-id 5688

member

Use member to add a member to a microsegment.

Use undo member to remove a member from a microsegment.

Syntax

member { ipv4 ipv4-address { mask | mask-length } | ipv6 ipv6-address prefix-length } [ vpn-instance vpn-instance-name ]

undo member { ipv4 ipv4-address { mask | mask-length } | ipv6 ipv6-address prefix-length } [ vpn-instance vpn-instance-name ]

Default

A microsegment does not contain members.

Views

Microsegment view

Predefined user roles

network-admin

Parameters

ipv4 ipv4-address { mask | mask-length }: Specifies a range of IPv4 addresses. The mask argument specifies a subnet mask. The mask-length argument specifies a subnet mask length in the range of 0 to 32. The endpoints that use the IPv4 addresses are added to the microsegment.

ipv6 ipv6-address prefix-length: Specifies a range of IPv6 addresses. The prefix-length argument specifies a prefix length in the range of 0 to 128. The endpoints that use the IPv6 addresses are added to the microsegment.

vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command adds IP addresses in the public network to the microsegment.

 

Usage guidelines

A member can belong to multiple microsegments.

You can execute this command multiple times to add multiple IP addresses or IP address ranges to a microsegment.

Examples

# Add IPv4 address 192.168.56.3 to microsegment 1 as a member.

<Sysname> system-view

[Sysname] microsegment 1

[Sysname-microsegment-1]  member ip 192.168.56.3 32

Related commands

display microsegment

microsegment

microsegment

Use microsegment to create a microsegment and enter its view, or enter the view of an existing microsegment.

Use undo microsegment to delete a microsegment.

Syntax

microsegment microsegment-id [ name microsegment-name ]

undo microsegment microsegment-id

Default

No microsegments exist.

Views

System view

Predefined user roles

network-admin

Parameters

microsegment-id: Specifies a microsegment ID in the range of 1 to 65535.

name microsegment-name: Specifies a microsegment name, a case-insensitive string of 1 to 32 characters. The microsegment name must be globally unique. If you do not specify a microsegment name, this command creates the microsegment without a name.

 

Usage guidelines

To modify the name of an existing microsegment, you must delete the microsegment and then re-create it with a new name.

If the amount of the free memory space reaches an alarm threshold, the system does not support creating a segment or entering the view of an existing segment. However, existing microsegments can be used.

Examples

# Create microsegment 1 with name micseg1 and enter its view.

<Sysname> system-view

[Sysname] microsegment 1 name micseg1

[Sysname-microsegment-1]

Related commands

member

microsegment enable

Use microsegment enable to enable microsegmentation.

Use undo microsegment enable to disable microsegmentation.

Syntax

microsegment enable

undo microsegment enable

Default

Microsegmentation is disabled.

Views

System view

Predefined user roles

network-admin

Usage guidelines

After you enable microsegmentation, member IP addresses and microsegment IDs are sent to the FIB. When you disable microsegmentation, the information is deleted from the FIB. The device forwards or drops an incoming packet according to the microsegment IDs of its source and destination IP addresses and the ACL and GBP configurations.

In an EVPN network, the synchronized microsegment settings directly take effect on the remote end and are not subject to this command.

 

Examples

# Enable microsegmentation.

<Sysname> system-view

[Sysname] microsegment enable

Related commands

display microsegment

member

microsegment

microsegment subnet-match

Use microsegment subnet-match to configure network address match method for microsegments.

Use undo microsegment subnet-match to restore the default.

Syntax

microsegment subnet-match longest

undo microsegment subnet-match

Default

Exact match is used for network addresses.

Views

System view

Predefined user roles

network-admin

Parameters

longest: Specifies longest match.

Usage guidelines

The device determines the segment membership of packets by matching the source and destination IP addresses of packets. The following match methods are available:

·     Exact match—The mask lengths of the source and destination IP addresses must be equal to those of members in microsegments. For example, a packet sourced from 10.10.10.1/24 matches member 10.10.10.0/24 instead of 10.10.10.0/23.

·     Longest match—The mask lengths of the source and destination IP addresses can be greater than or equal to those of members in microsegments. For example, a packet sourced from 10.10.10.1/24 matches member 10.10.10.0/16.

The device uses different match methods for different member types of microsegments:

·     Host addresses (IPv4 addresses with a 32-bit mask and IPv6 addresses with a 128-bit prefix) use the longest match method, which cannot be modified.

·     The default route (0.0.0.0/0 or 0::0/0) uses the exact match method, which cannot be modified.

·     Network addresses (IPv4 addresses with a 1-bit to 31-bit mask and IPv6 addresses with a 1-bit to 127-bit prefix) use the exact match method by default. You can configure the longest match method for this member type.

The longest match method helps you simplify configuration when you need to add a large number of network addresses to a microsegment. For example, to match network addresses 10.10.10.0/24, 10.10.20.0/24, and 10.10.30.0/24 to microsegment 1, you need to execute only the member ipv4 10.10.10.0/16 command if you use longest match.

Examples

# Configure the network address match method as longest match.

<Sysname> system-view

[Sysname] microsegment subnet-match longest

Related commands

display microsegment

member