Fundamentals Command Reference

Covers the commands for logging in to and setting up an SR6600/SR6600-X Router. This command reference includes:

·     CLI

·     RBAC

·      Login management

·      FTP and TFTP

·      File Management

·      Configuration File Management

·      Software Upgrade

·     ISSU

·     Emergency shell

·     Automatic configuration

·      Device Management

·     Tcl

·     Python

·     License

Virtual Technologies Command Reference

Describes the commands of Virtual Technologies. This guide includes:

·     IRF

Interface Command Reference

Covers the interface configuration commands. This command reference includes:

·     Bulk interface

·     Ethernet Interface

·     POS Interface

·      CPOS Interface

·     Loopback, null, and inloopback interface

·     WAN Interface

·     ATM Interface

Layer 2 – LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC Address Table

·      Ethernet Link Aggregation

·     VLAN

·     VLAN Termination

·     LLDP

Layer 2 – WAN Access Command Reference

Covers WAN access technologies. This command reference includes:

·     PPP

·      L2TP

·      HDLC

·      Frame Relay

·      ATM

Layer 3 – IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP

·     IP Addressing

·      DHCP

·      DNS

·      NAT

·      IP Forwarding Basics

·     Fast forwarding

·      Flow Classification

·      Adjacency Table

·     IRDP

·     IP Performance Optimization

·      UDP Helper

·      IPv6 Basics

·      DHCPv6

·     IPv6 fast forwarding

·     Tunneling

·     GRE

·     ADVPN

Layer 3 – IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     Basic IP routing

·      Static Routing

·      RIP

·      OSPF

·      IS-IS

·      BGP

·      Policy-based routing

·      IPv6 Static Routing

·      RIPng

·      OSPFv3

·      IPv6 IS-IS

·     IPv6 Policy-based routing

·      Routing Policy

·     MTR

·     DCN

IP Multicast Command Reference

Covers the commands for Layer 3 multicast protocols. This command reference includes:

·     Multicast Routing and Forwarding

·      IGMP

·      PIM

·      MSDP

·     Multicast VPN

·      IPv6 Multicast Routing and Forwarding

·      MLD

·      IPv6 PIM

MPLS Command Reference

Describes the commands to configure MPLS and MPLS VPN, This command reference includes:

·     MPLS Basics

·     Static LSP

·     LDP

·      MPLS TE

·     Static CRLSP

·     RSVP

·     Tunnel policy

·      MPLS L2VPN

·      VPLS

·      MPLS L3VPN

·     L2VPN access to L3VPN or IP backbone

·     MPLS OAM

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·      QoS

·      MPLS QoS

·      Time range

Security Command Reference

Covers security feature commands. This command reference includes:

·     AAA

·      Portal

·     Password Control

·     Public Key

·      PKI

·      IPsec

·      SSH

·     SSL

·     ASPF

·     APR

·      Session Management

·      Connection Limit

·      Attack Detection and Protection

·     ARP Attack Protection

·      URPF

·     Crypto engine

·     FIPS

·     SMA

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Interface backup

·      Ethernet OAM

·      VRRP

·     BFD

·      Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes:

·     System Maintenance and Debugging

·      NQA

·      NTP

·     PTP

·     Network synchronization

·     SNMP

·      RMON

·     EAA

·     Process monitoring and maintenance

·      Sampler

·      Mirroring

·      NetStream

·      IPv6 NetStream

·      Information Center

·      Flow Logg

EVI Command Reference

Describes the commands of EVI. This guide includes:

·     EVI