Title | Size | Downloads |
---|---|---|
00-Command_Index-book.pdf | 151.28 KB |
- Table of Contents
The command index includes all the commands in the Command Manual, which are arranged alphabetically.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
|
|
|
abr-summary (OSPF area view) |
OSPF Commands |
1-1 |
abr-summary (OSPFv3 area view) |
OSPFv3 Commands |
1-1 |
accept-label |
MPLS Basics Commands |
1-1 |
access-limit |
AAA Commands |
1-1 |
access-limit enable |
AAA Commands |
1-1 |
access-user detect |
Portal Commands |
1-1 |
accounting default |
AAA Commands |
1-2 |
accounting login |
AAA Commands |
1-3 |
accounting optional |
AAA Commands |
1-4 |
accounting portal |
AAA Commands |
1-5 |
accounting ppp |
AAA Commands |
1-6 |
accounting-on enable |
AAA Commands |
2-1 |
accounting-on enable interval |
AAA Commands |
2-2 |
accounting-on enable send |
AAA Commands |
2-2 |
acfp server enable |
ACFP Commands |
1-1 |
acl |
ACL Commands |
1-3 |
acl (in user interface view) |
User Interface Commands |
1-1 |
acl accelerate |
ACL Commands |
1-5 |
acl copy |
ACL Commands |
1-5 |
acl ipv6 |
ACL Commands |
1-18 |
acl ipv6 copy |
ACL Commands |
1-19 |
acl ipv6 name |
ACL Commands |
1-20 |
acl name |
ACL Commands |
1-6 |
acsei client close |
ACSEI Commands |
1-1 |
acsei client reboot |
ACSEI Commands |
1-1 |
acsei server |
ACSEI Commands |
1-2 |
acsei server enable |
ACSEI Commands |
1-2 |
acsei timer clock-sync |
ACSEI Commands |
1-3 |
acsei timer monitor |
ACSEI Commands |
1-4 |
activation-key |
User Interface Commands |
1-2 |
add hop |
MPLS TE Commands |
1-1 |
advantage-factor |
NQA Commands |
1-1 |
advertise-label |
MPLS Basics Commands |
1-2 |
aggregate |
BGP Commands |
1-1 |
aggregate (IPv6 address family view) |
IPv6 BGP Commands |
1-1 |
aggregate (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-1 |
aggregate (MBGP family view) |
MBGP Commands |
1-1 |
ah authentication-algorithm |
IPsec Commands |
1-1 |
alarm |
WAN Interface Commands |
1-15 |
alarm (CT1 interface) |
WAN Interface Commands |
1-28 |
alarm (CT3 interface) |
WAN Interface Commands |
1-81 |
alarm-threshold |
WAN Interface Commands |
1-29 |
alg |
ALG Commands |
1-1 |
allow l2tp |
L2TP Commands |
1-1 |
application aging-time |
Session Management Commands |
1-1 |
apply access-vpn vpn-instance |
IP Unicast Policy Routing Commands |
1-1 |
apply as-path |
Route Policy Commands |
1-1 |
apply comm-list delete |
Route Policy Commands |
1-2 |
apply community |
Route Policy Commands |
1-2 |
apply cost |
Route Policy Commands |
1-3 |
apply cost-type |
Route Policy Commands |
1-4 |
apply default output-interface |
IP Unicast Policy Routing Commands |
1-2 |
apply default output-interface |
IPv6 Unicast Policy Routing Commands |
1-1 |
apply destination-based-forwarding |
IPv6 Unicast Policy Routing Commands |
1-2 |
apply extcommunity |
Route Policy Commands |
1-5 |
apply ip-address default next-hop |
IP Unicast Policy Routing Commands |
1-2 |
apply ip-address next-hop |
IP Unicast Policy Routing Commands |
1-3 |
apply ip-address next-hop |
Route Policy Commands |
1-22 |
apply ip-precedence |
IP Unicast Policy Routing Commands |
1-4 |
apply ipv6 next-hop |
Route Policy Commands |
1-27 |
apply ipv6-address default next-hop |
IPv6 Unicast Policy Routing Commands |
1-2 |
apply ipv6-address next-hop |
IPv6 Unicast Policy Routing Commands |
1-3 |
apply ipv6-precedence |
IPv6 Unicast Policy Routing Commands |
1-4 |
apply isis |
Route Policy Commands |
1-6 |
apply local-preference |
Route Policy Commands |
1-6 |
apply mpls-label |
Route Policy Commands |
1-7 |
apply origin |
Route Policy Commands |
1-8 |
apply output-interface |
IP Unicast Policy Routing Commands |
1-5 |
apply output-interface |
IPv6 Unicast Policy Routing Commands |
1-5 |
apply preference |
Route Policy Commands |
1-8 |
apply preferred-value |
Route Policy Commands |
1-9 |
apply tag |
Route Policy Commands |
1-10 |
area (OSPF view) |
OSPF Commands |
1-2 |
area (OSPFv3 view) |
OSPFv3 Commands |
1-2 |
area-authentication-mode |
IS-IS Commands |
1-1 |
arp anti-attack active-ack enable |
ARP Commands |
3-1 |
arp anti-attack valid-ack enable |
ARP Commands |
3-2 |
arp authorized enable |
ARP Commands |
3-3 |
arp authorized time-out |
ARP Commands |
3-4 |
arp check enable |
ARP Commands |
1-1 |
arp max-learning-num |
ARP Commands |
1-1 |
arp rate-limit |
ARP Commands |
3-2 |
arp resolving-route enable |
ARP Commands |
1-12 |
arp source-suppression enable |
ARP Commands |
1-10 |
arp source-suppression limit |
ARP Commands |
1-10 |
arp static |
ARP Commands |
1-2 |
arp timer aging |
ARP Commands |
1-3 |
asbr-summary |
OSPF Commands |
1-2 |
ascii |
File System Management Commands |
2-6 |
aspf-policy |
Firewall Commands |
1-8 |
atm class |
ATM Commands |
1-1 |
atm-class |
ATM Commands |
1-1 |
atm-link check |
ATM Commands |
1-2 |
attribute |
PKI Commands |
1-1 |
authentication default |
AAA Commands |
1-7 |
authentication login |
AAA Commands |
1-8 |
authentication portal |
AAA Commands |
1-9 |
authentication ppp |
AAA Commands |
1-9 |
authentication-algorithm |
IPsec Commands |
2-1 |
authentication-method |
IPsec Commands |
2-1 |
authentication-mode |
OSPF Commands |
1-4 |
authentication-mode |
User Interface Commands |
1-5 |
authorization command |
AAA Commands |
1-10 |
authorization default |
AAA Commands |
1-11 |
authorization login |
AAA Commands |
1-12 |
authorization portal |
AAA Commands |
1-13 |
authorization ppp |
AAA Commands |
1-15 |
authorization-attribute |
AAA Commands |
1-16 |
auto cost enable |
IS-IS Commands |
1-2 |
auto-execute command |
User Interface Commands |
1-3 |
auto-rp enable |
PIM Commands |
1-1 |
|
|
|
backup startup-configuration |
File System Management Commands |
1-15 |
balance (BGP/BGP-VPN instance view) |
BGP Commands |
1-2 |
balance (IPv6 address family view) |
IPv6 BGP Commands |
1-2 |
balance (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-2 |
balance (MBGP family view) |
MBGP Commands |
1-2 |
bandwidth-reference |
OSPFv3 Commands |
1-2 |
bandwidth-reference (IS-IS view) |
IS-IS Commands |
1-3 |
bandwidth-reference (OSPF view) |
OSPF Commands |
1-4 |
baudrate |
WAN Interface Commands |
1-1 |
bert (CE3 interface) |
WAN Interface Commands |
1-68 |
bert (CT1 interface) |
WAN Interface Commands |
1-30 |
bert (CT3 interface) |
WAN Interface Commands |
1-82 |
bestroute as-path-neglect (BGP/BGP-VPN instance view) |
BGP Commands |
1-3 |
bestroute as-path-neglect (IPv6 address family view) |
IPv6 BGP Commands |
1-3 |
bestroute as-path-neglect (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-3 |
bestroute as-path-neglect (MBGP family view) |
MBGP Commands |
1-3 |
bestroute compare-med (BGP/BGP-VPN instance view) |
BGP Commands |
1-4 |
bestroute compare-med (IPv6 address family view) |
IPv6 BGP Commands |
1-3 |
bestroute compare-med (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-3 |
bestroute compare-med (MBGP family view) |
MBGP Commands |
1-4 |
bestroute med-confederation (BGP/BGP-VPN instance view) |
BGP Commands |
1-5 |
bestroute med-confederation (IPv6 address family view) |
IPv6 BGP Commands |
1-4 |
bestroute med-confederation (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-4 |
bestroute med-confederation (MBGP family view) |
MBGP Commands |
1-4 |
bfd detect-multiplier |
BFD Commands |
1-1 |
bfd echo-source-ip |
BFD Commands |
1-1 |
bfd min-echo-receive-interval |
BFD Commands |
1-2 |
bfd min-receive-interval |
BFD Commands |
1-3 |
bfd min-transmit-interval |
BFD Commands |
1-3 |
bfd session init-mode |
BFD Commands |
1-4 |
bgp |
BGP Commands |
1-5 |
bims-server |
DHCP Commands |
1-1 |
binary |
File System Management Commands |
2-7 |
bind-attribute |
AAA Commands |
1-17 |
bootfile-name |
DHCP Commands |
1-2 |
boot-loader |
Device Management Commands |
1-1 |
boot-loader update slot |
Device Management Commands |
1-2 |
bootrom |
Device Management Commands |
1-3 |
broadcast-limit link |
PPP Commands |
1-1 |
bsr-policy (IPv6 PIM view) |
IPv6 PIM Commands |
1-1 |
bsr-policy (PIM view) |
PIM Commands |
1-2 |
bye |
SSH2.0 Commands |
1-16 |
bye |
File System Management Commands |
2-7 |
|
|
|
ca identifier |
PKI Commands |
1-2 |
cable |
WAN Interface Commands |
1-15 |
cable (CT1 interface) |
WAN Interface Commands |
1-31 |
cable (CT3 interface) |
WAN Interface Commands |
1-83 |
cache-sa-enable |
MSDP Commands |
1-1 |
car |
QoS Commands |
1-7 |
card-mode |
Device Management Commands |
1-6 |
cbs |
FR QoS Commands |
1-1 |
c-bsr (IPv6 PIM view) |
IPv6 PIM Commands |
1-1 |
c-bsr (PIM view) |
PIM Commands |
1-2 |
c-bsr admin-scope |
PIM Commands |
1-3 |
c-bsr global |
PIM Commands |
1-4 |
c-bsr group |
PIM Commands |
1-4 |
c-bsr hash-length (IPv6 PIM view) |
IPv6 PIM Commands |
1-2 |
c-bsr hash-length (PIM view) |
PIM Commands |
1-5 |
c-bsr holdtime (IPv6 PIM view) |
IPv6 PIM Commands |
1-3 |
c-bsr holdtime (PIM view) |
PIM Commands |
1-6 |
c-bsr interval (IPv6 PIM view) |
IPv6 PIM Commands |
1-4 |
c-bsr interval (PIM view) |
PIM Commands |
1-6 |
c-bsr priority (IPv6 PIM view) |
IPv6 PIM Commands |
1-4 |
c-bsr priority (PIM view) |
PIM Commands |
1-7 |
ccc interface in-label out-label |
MPLS L2VPN Commands |
1-1 |
ccc interface out-interface |
MPLS L2VPN Commands |
1-2 |
cd |
SSH2.0 Commands |
1-16 |
cd |
File System Management Commands |
1-1 |
cd |
File System Management Commands |
2-8 |
cdup |
SSH2.0 Commands |
1-17 |
cdup |
File System Management Commands |
2-9 |
ce |
MPLS L2VPN Commands |
1-3 |
certificate domain |
IPsec Commands |
2-2 |
certificate request entity |
PKI Commands |
1-3 |
certificate request from |
PKI Commands |
1-3 |
certificate request mode |
PKI Commands |
1-4 |
certificate request polling |
PKI Commands |
1-5 |
certificate request url |
PKI Commands |
1-5 |
channel-set (CE1 interface) |
WAN Interface Commands |
1-16 |
channel-set (CT1 interface) |
WAN Interface Commands |
1-32 |
checkzero |
RIP Commands |
1-1 |
checkzero |
RIPng Commands |
1-1 |
cir |
FR QoS Commands |
1-2 |
cir allow |
FR QoS Commands |
1-3 |
circuit-cost |
IS-IS Commands |
1-3 |
classifier behavior |
QoS Commands |
1-15 |
clock |
CPOS Interface Commands |
1-1 |
clock |
POS Interface Commands |
1-1 |
clock |
WAN Interface Commands |
1-2 |
clock |
ATM Interface Commands |
1-4 |
clock |
ATM Commands |
1-3 |
clock |
E-CPOS Interface Commands |
1-1 |
clock (CE1 interface) |
WAN Interface Commands |
1-17 |
clock (CE3 interface) |
WAN Interface Commands |
1-69 |
clock (CT1 interface) |
WAN Interface Commands |
1-32 |
clock (CT3 interface) |
WAN Interface Commands |
1-84 |
clock datetime |
Basic System Configuration Commands |
1-1 |
clock summer-time one-off |
Basic System Configuration Commands |
1-1 |
clock summer-time repeating |
Basic System Configuration Commands |
1-2 |
clock timezone |
Basic System Configuration Commands |
1-4 |
clock-change auto |
WAN Interface Commands |
1-17 |
close |
File System Management Commands |
2-9 |
code |
WAN Interface Commands |
1-3 |
code (CEI interface) |
WAN Interface Commands |
1-18 |
code (CT1 interface) |
WAN Interface Commands |
1-33 |
codec-type |
NQA Commands |
1-1 |
combo enable |
Ethernet Interface Commands |
1-1 |
command-privilege level |
Basic System Configuration Commands |
1-4 |
common-name |
PKI Commands |
1-6 |
compare-different-as-med (BGP/BGP-VPN instance view) |
BGP Commands |
1-6 |
compare-different-as-med (IPv6 address family view) |
IPv6 BGP Commands |
1-5 |
compare-different-as-med (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-5 |
compare-different-as-med (MBGP family view) |
MBGP Commands |
1-5 |
confederation id |
BGP Commands |
1-7 |
confederation nonstandard |
BGP Commands |
1-8 |
confederation peer-as |
BGP Commands |
1-8 |
configure-user count |
Basic System Configuration Commands |
1-6 |
congestion-threshold |
FR QoS Commands |
1-3 |
connection |
MPLS L2VPN Commands |
1-3 |
connection-limit apply policy (system view) |
Connection Limit Commands |
1-1 |
connection-limit policy |
Connection Limit Commands |
1-1 |
controller cpos |
CPOS Interface Commands |
1-1 |
controller e1 |
WAN Interface Commands |
1-18 |
controller e3 |
WAN Interface Commands |
1-69 |
controller e-cpos |
E-CPOS Interface Commands |
1-1 |
controller t1 |
WAN Interface Commands |
1-34 |
controller t3 |
WAN Interface Commands |
1-84 |
copy |
File System Management Commands |
1-2 |
copyright-info enable |
Basic System Configuration Commands |
1-7 |
cost-style |
IS-IS Commands |
1-4 |
country |
PKI Commands |
1-7 |
crc |
CPOS Interface Commands |
1-2 |
crc |
POS Interface Commands |
1-1 |
crc |
WAN Interface Commands |
1-3 |
crc |
WAN Interface Commands |
1-19 |
crc |
WAN Interface Commands |
1-34 |
crc |
WAN Interface Commands |
1-44 |
crc |
WAN Interface Commands |
1-54 |
crc |
WAN Interface Commands |
1-70 |
crc |
WAN Interface Commands |
1-85 |
crl check |
PKI Commands |
1-7 |
crl update-period |
PKI Commands |
1-8 |
crl url |
PKI Commands |
1-8 |
c-rp (IPv6 PIM view) |
IPv6 PIM Commands |
1-5 |
c-rp (PIM view) |
PIM Commands |
1-8 |
c-rp advertisement-interval (IPv6 PIM view) |
IPv6 PIM Commands |
1-6 |
c-rp advertisement-interval (PIM view) |
PIM Commands |
1-9 |
c-rp holdtime (IPv6 PIM view) |
IPv6 PIM Commands |
1-7 |
c-rp holdtime (PIM view) |
PIM Commands |
1-10 |
crp-policy (IPv6 PIM view) |
IPv6 PIM Commands |
1-7 |
crp-policy (PIM view) |
PIM Commands |
1-10 |
cryptoengine enable |
IPsec Commands |
1-1 |
cut connection |
AAA Commands |
1-18 |
|
|
|
dampening (BGP/BGP-VPN instance view) |
BGP Commands |
1-9 |
dampening (IPv6 address family view) |
IPv6 BGP Commands |
1-6 |
dampening (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-6 |
dampening (MBGP family view) |
MBGP Commands |
1-6 |
dar enable |
QoS Commands |
6-1 |
dar p2p signature-file |
QoS Commands |
6-1 |
dar protocol-group |
QoS Commands |
6-2 |
dar protocol-statistic |
QoS Commands |
6-3 |
databits |
User Interface Commands |
1-6 |
data-coding |
WAN Interface Commands |
1-20 |
data-coding (CT1 interface) |
WAN Interface Commands |
1-35 |
data-fill |
NQA Commands |
1-2 |
data-flow-format (HWTACACS scheme view) |
AAA Commands |
3-1 |
data-flow-format (RADIUS scheme view) |
AAA Commands |
2-3 |
data-size |
NQA Commands |
1-3 |
debugging |
File System Management Commands |
2-10 |
debugging |
System Maintenance and Debugging Commands |
1-8 |
default |
OSPF Commands |
1-5 |
default cost |
OSPFv3 Commands |
1-3 |
default cost (RIP view) |
RIP Commands |
1-1 |
default cost (RIPng view) |
RIPng Commands |
1-1 |
default ipv4-unicast |
BGP Commands |
1-10 |
default local-preference (BGP/BGP-VPN instance view) |
BGP Commands |
1-11 |
default local-preference (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-1 |
default local-preference (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-7 |
default local-preference (MBGP family view) |
MBGP Commands |
1-6 |
default local-preference(IPv6 address family view) |
IPv6 BGP Commands |
1-7 |
default med (BGP/BGP-VPN instance view) |
BGP Commands |
1-12 |
default med (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-2 |
default med (IPv6 address family view) |
IPv6 BGP Commands |
1-7 |
default med (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-7 |
default med (MBGP family view) |
MBGP Commands |
1-7 |
default-cost (OSPF area view) |
OSPF Commands |
1-6 |
default-cost (OSPFv3 area view) |
OSPFv3 Commands |
1-4 |
default-route |
RIP Commands |
1-2 |
default-route imported (BGP/BGP-VPN instance view) |
BGP Commands |
1-13 |
default-route imported (IPv6 address family view) |
IPv6 BGP Commands |
1-8 |
default-route imported (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-8 |
default-route imported (MBGP family view) |
MBGP Commands |
1-8 |
default-route-advertise |
OSPFv3 Commands |
1-4 |
default-route-advertise (IS-IS view) |
IS-IS Commands |
1-5 |
default-route-advertise (OSPF view) |
OSPF Commands |
1-6 |
delete |
SSH2.0 Commands |
1-17 |
delete |
File System Management Commands |
1-2 |
delete |
File System Management Commands |
2-11 |
delete hop |
MPLS TE Commands |
1-2 |
delete ipv6 static-routes all |
IPv6 Static Routing Commands |
1-1 |
delete static-routes all |
Static Routing Commands |
1-1 |
description |
Ethernet Interface Commands |
1-1 |
description |
WAN Interface Commands |
1-4 |
description |
WAN Interface Commands |
1-20 |
description |
Logical Interface Commands |
1-1 |
description (any NQA test type view) |
NQA Commands |
1-4 |
description (CE3 interface) |
WAN Interface Commands |
1-70 |
description (CT1 interface) |
WAN Interface Commands |
1-35 |
description (CT3 interface) |
WAN Interface Commands |
1-85 |
description (for IPv4) |
ACL Commands |
1-7 |
description (for IPv6) |
ACL Commands |
1-20 |
description (OSPF/OSPF area view) |
OSPF Commands |
1-7 |
description (VPN instance view) |
MPLS L3VPN Commands |
1-2 |
destination |
Tunneling Commands |
1-1 |
destination ip |
NQA Commands |
1-4 |
destination port |
NQA Commands |
1-5 |
detect |
WAN Interface Commands |
1-5 |
detect-ais |
WAN Interface Commands |
1-21 |
dh |
IPsec Commands |
2-3 |
dhcp enable |
DHCP Commands |
1-2 |
dhcp relay address-check |
DHCP Commands |
2-1 |
dhcp relay information circuit-id format-type |
DHCP Commands |
2-2 |
dhcp relay information circuit-id string |
DHCP Commands |
2-2 |
dhcp relay information enable |
DHCP Commands |
2-3 |
dhcp relay information format |
DHCP Commands |
2-4 |
dhcp relay information remote-id format-type |
DHCP Commands |
2-5 |
dhcp relay information remote-id string |
DHCP Commands |
2-6 |
dhcp relay information strategy |
DHCP Commands |
2-7 |
dhcp relay release ip |
DHCP Commands |
2-7 |
dhcp relay security static |
DHCP Commands |
2-8 |
dhcp relay security tracker |
DHCP Commands |
2-9 |
dhcp relay server-detect |
DHCP Commands |
2-10 |
dhcp relay server-group |
DHCP Commands |
2-10 |
dhcp relay server-select |
DHCP Commands |
2-11 |
dhcp select relay |
DHCP Commands |
2-12 |
dhcp select server global-pool |
DHCP Commands |
1-3 |
dhcp server detect |
DHCP Commands |
1-4 |
dhcp server forbidden-ip |
DHCP Commands |
1-4 |
dhcp server ip-pool |
DHCP Commands |
1-5 |
dhcp server ping packets |
DHCP Commands |
1-6 |
dhcp server ping timeout |
DHCP Commands |
1-6 |
dhcp server relay information enable |
DHCP Commands |
1-7 |
dir |
SSH2.0 Commands |
1-18 |
dir |
File System Management Commands |
1-3 |
dir |
File System Management Commands |
2-12 |
disconnect |
File System Management Commands |
2-13 |
display acfp client-info |
ACFP Commands |
1-2 |
display acfp policy-info |
ACFP Commands |
1-3 |
display acfp rule-cache |
ACFP Commands |
1-5 |
display acfp rule-info |
ACFP Commands |
1-7 |
display acfp server-info |
ACFP Commands |
1-9 |
display acl |
ACL Commands |
1-7 |
display acl accelerate |
ACL Commands |
1-8 |
display acl ipv6 |
ACL Commands |
1-21 |
display acsei client info |
ACSEI Commands |
1-4 |
display acsei client summary |
ACSEI Commands |
1-6 |
display adjacent-table |
Adjacency Table Commands |
1-1 |
display arp |
ARP Commands |
1-3 |
display arp ip-address |
ARP Commands |
1-5 |
display arp source-suppression |
ARP Commands |
1-11 |
display arp timer aging |
ARP Commands |
1-6 |
display arp vpn-instance |
ARP Commands |
1-6 |
display aspf all |
Firewall Commands |
1-8 |
display aspf interface |
Firewall Commands |
1-9 |
display aspf policy |
Firewall Commands |
1-10 |
display atm class |
ATM Commands |
1-3 |
display atm interface |
ATM Commands |
1-4 |
display atm map-info |
ATM Commands |
1-5 |
display atm pvc-group |
ATM Commands |
1-6 |
display atm pvc-info |
ATM Commands |
1-7 |
display bfd debugging-switches |
BFD Commands |
1-5 |
display bfd interface |
BFD Commands |
1-5 |
display bfd session |
BFD Commands |
1-7 |
display bgp group |
BGP Commands |
1-13 |
display bgp ipv6 group |
IPv6 BGP Commands |
1-9 |
display bgp ipv6 multicast group |
IPv6 MBGP Commands |
1-12 |
display bgp ipv6 multicast network |
IPv6 MBGP Commands |
1-13 |
display bgp ipv6 multicast paths |
IPv6 MBGP Commands |
1-14 |
display bgp ipv6 multicast peer |
IPv6 MBGP Commands |
1-15 |
display bgp ipv6 multicast routing-table |
IPv6 MBGP Commands |
1-16 |
display bgp ipv6 multicast routing-table as-path-acl |
IPv6 MBGP Commands |
1-18 |
display bgp ipv6 multicast routing-table community |
IPv6 MBGP Commands |
1-19 |
display bgp ipv6 multicast routing-table community-list |
IPv6 MBGP Commands |
1-20 |
display bgp ipv6 multicast routing-table dampened |
IPv6 MBGP Commands |
1-20 |
display bgp ipv6 multicast routing-table dampening parameter |
IPv6 MBGP Commands |
1-21 |
display bgp ipv6 multicast routing-table different-origin-as |
IPv6 MBGP Commands |
1-22 |
display bgp ipv6 multicast routing-table flap-info |
IPv6 MBGP Commands |
1-23 |
display bgp ipv6 multicast routing-table peer |
IPv6 MBGP Commands |
1-24 |
display bgp ipv6 multicast routing-table regular-expression |
IPv6 MBGP Commands |
1-25 |
display bgp ipv6 multicast routing-table statistic |
IPv6 MBGP Commands |
1-26 |
display bgp ipv6 network |
IPv6 BGP Commands |
1-10 |
display bgp ipv6 paths |
IPv6 BGP Commands |
1-11 |
display bgp ipv6 peer |
IPv6 BGP Commands |
1-12 |
display bgp ipv6 routing-table |
IPv6 BGP Commands |
1-14 |
display bgp ipv6 routing-table as-path-acl |
IPv6 BGP Commands |
1-16 |
display bgp ipv6 routing-table community |
IPv6 BGP Commands |
1-16 |
display bgp ipv6 routing-table community-list |
IPv6 BGP Commands |
1-17 |
display bgp ipv6 routing-table dampened |
IPv6 BGP Commands |
1-18 |
display bgp ipv6 routing-table dampening parameter |
IPv6 BGP Commands |
1-19 |
display bgp ipv6 routing-table different-origin-as |
IPv6 BGP Commands |
1-20 |
display bgp ipv6 routing-table flap-info |
IPv6 BGP Commands |
1-20 |
display bgp ipv6 routing-table label |
IPv6 BGP Commands |
1-21 |
display bgp ipv6 routing-table peer |
IPv6 BGP Commands |
1-22 |
display bgp ipv6 routing-table regular-expression |
IPv6 BGP Commands |
1-23 |
display bgp ipv6 routing-table statistic |
IPv6 BGP Commands |
1-24 |
display bgp l2vpn |
MPLS L2VPN Commands |
1-4 |
display bgp mdt group |
Multicast VPN Commands |
1-1 |
display bgp mdt peer |
Multicast VPN Commands |
1-3 |
display bgp mdt routing-table |
Multicast VPN Commands |
1-6 |
display bgp multicast group |
MBGP Commands |
1-12 |
display bgp multicast network |
MBGP Commands |
1-14 |
display bgp multicast paths |
MBGP Commands |
1-15 |
display bgp multicast peer |
MBGP Commands |
1-16 |
display bgp multicast routing-table |
MBGP Commands |
1-18 |
display bgp multicast routing-table as-path-acl |
MBGP Commands |
1-19 |
display bgp multicast routing-table cidr |
MBGP Commands |
1-20 |
display bgp multicast routing-table community |
MBGP Commands |
1-21 |
display bgp multicast routing-table community-list |
MBGP Commands |
1-22 |
display bgp multicast routing-table dampened |
MBGP Commands |
1-23 |
display bgp multicast routing-table dampening parameter |
MBGP Commands |
1-23 |
display bgp multicast routing-table different-origin-as |
MBGP Commands |
1-24 |
display bgp multicast routing-table flap-info |
MBGP Commands |
1-25 |
display bgp multicast routing-table peer |
MBGP Commands |
1-26 |
display bgp multicast routing-table regular-expression |
MBGP Commands |
1-27 |
display bgp multicast routing-table statistic |
MBGP Commands |
1-28 |
display bgp network |
BGP Commands |
1-15 |
display bgp paths |
BGP Commands |
1-16 |
display bgp peer |
BGP Commands |
1-17 |
display bgp routing-table |
BGP Commands |
1-19 |
display bgp routing-table as-path-acl |
BGP Commands |
1-21 |
display bgp routing-table cidr |
BGP Commands |
1-22 |
display bgp routing-table community |
BGP Commands |
1-22 |
display bgp routing-table community-list |
BGP Commands |
1-23 |
display bgp routing-table dampened |
BGP Commands |
1-24 |
display bgp routing-table dampening parameter |
BGP Commands |
1-25 |
display bgp routing-table different-origin-as |
BGP Commands |
1-26 |
display bgp routing-table flap-info |
BGP Commands |
1-26 |
display bgp routing-table label |
BGP Commands |
1-27 |
display bgp routing-table peer |
BGP Commands |
1-28 |
display bgp routing-table regular-expression |
BGP Commands |
1-29 |
display bgp routing-table statistic |
BGP Commands |
1-30 |
display bgp vpnv4 all routing-table |
MPLS L3VPN Commands |
1-3 |
display bgp vpnv4 group |
MPLS L3VPN Commands |
1-6 |
display bgp vpnv4 network |
MPLS L3VPN Commands |
1-8 |
display bgp vpnv4 paths |
MPLS L3VPN Commands |
1-9 |
display bgp vpnv4 peer |
MPLS L3VPN Commands |
1-10 |
display bgp vpnv4 route-distinguisher routing-table |
MPLS L3VPN Commands |
1-15 |
display bgp vpnv4 routing-table label |
MPLS L3VPN Commands |
1-19 |
display bgp vpnv4 vpn-instance routing-table |
MPLS L3VPN Commands |
1-21 |
display boot-loader |
Device Management Commands |
1-7 |
display brief interface |
Ethernet Interface Commands |
1-2 |
display ccc |
MPLS L2VPN Commands |
1-10 |
display channel |
Information Center Commands |
1-1 |
display clipboard |
Basic System Configuration Commands |
1-8 |
display clock |
Basic System Configuration Commands |
1-8 |
display configure-user |
Basic System Configuration Commands |
1-9 |
display connection |
AAA Commands |
1-19 |
display connection-limit policy |
Connection Limit Commands |
1-2 |
display controller cpos |
CPOS Interface Commands |
1-3 |
display controller cpos e1 |
CPOS Interface Commands |
1-7 |
display controller cpos e3 |
CPOS Interface Commands |
1-8 |
display controller cpos t1 |
CPOS Interface Commands |
1-10 |
display controller cpos t3 |
CPOS Interface Commands |
1-11 |
display controller e1 |
WAN Interface Commands |
1-21 |
display controller e3 |
WAN Interface Commands |
1-71 |
display controller e-cpos |
E-CPOS Interface Commands |
1-2 |
display controller t1 |
WAN Interface Commands |
1-36 |
display controller t3 |
WAN Interface Commands |
1-86 |
display cpu-usage |
Device Management Commands |
1-8 |
display cpu-usage history |
Device Management Commands |
1-11 |
display current-configuration |
Basic System Configuration Commands |
1-10 |
display dar protocol-statistic |
QoS Commands |
6-3 |
display debugging |
System Maintenance and Debugging Commands |
1-9 |
display device |
Device Management Commands |
1-13 |
display device manuinfo |
Device Management Commands |
1-15 |
display dhcp client |
DHCP Commands |
3-1 |
display dhcp relay |
DHCP Commands |
2-13 |
display dhcp relay information |
DHCP Commands |
2-13 |
display dhcp relay security |
DHCP Commands |
2-14 |
display dhcp relay security statistics |
DHCP Commands |
2-15 |
display dhcp relay security tracker |
DHCP Commands |
2-16 |
display dhcp relay server-group |
DHCP Commands |
2-16 |
display dhcp relay statistics |
DHCP Commands |
2-17 |
display dhcp server conflict |
DHCP Commands |
1-8 |
display dhcp server expired |
DHCP Commands |
1-8 |
display dhcp server forbidden-ip |
DHCP Commands |
1-10 |
display dhcp server free-ip |
DHCP Commands |
1-9 |
display dhcp server ip-in-use |
DHCP Commands |
1-11 |
display dhcp server statistics |
DHCP Commands |
1-12 |
display dhcp server tree |
DHCP Commands |
1-13 |
display diagnostic-information |
Basic System Configuration Commands |
1-11 |
display dns domain |
DNS Commands |
1-1 |
display dns dynamic-host |
DNS Commands |
1-2 |
display dns ipv6 dynamic-host |
IPv6 Basics Commands |
1-1 |
display dns ipv6 server |
IPv6 Basics Commands |
1-2 |
display dns server |
DNS Commands |
1-3 |
display domain |
AAA Commands |
1-20 |
display environment |
Device Management Commands |
1-16 |
display explicit-path |
MPLS TE Commands |
1-2 |
display fan |
Device Management Commands |
1-17 |
display fe1 |
WAN Interface Commands |
1-45 |
display fib |
IP Performance Optimization Commands |
1-1 |
display fib ip-address |
IP Performance Optimization Commands |
1-3 |
display fib statistics |
IP Performance Optimization Commands |
1-4 |
display fib vpn-instance |
MPLS L3VPN Commands |
1-23 |
display fib vpn-instance ip-address |
MPLS L3VPN Commands |
1-25 |
display firewall http activex-blocking |
WEB Filtering Commands |
1-1 |
display firewall http java-blocking |
WEB Filtering Commands |
1-2 |
display firewall http url-filter host |
WEB Filtering Commands |
1-3 |
display firewall http url-filter parameter |
WEB Filtering Commands |
1-4 |
display firewall ipv6 statistics |
Firewall Commands |
1-1 |
display firewall-statistics |
Firewall Commands |
1-2 |
display forwarding policy |
Flow Classification Commands |
1-1 |
display fr class-map |
FR QoS Commands |
1-4 |
display fr dlci-switch |
Frame Relay Commands |
1-1 |
display fr fragment-info |
FR QoS Commands |
1-6 |
display fr inarp-info |
Frame Relay Commands |
1-2 |
display fr interface |
Frame Relay Commands |
1-2 |
display fr lmi-info |
Frame Relay Commands |
1-3 |
display fr map-info |
Frame Relay Commands |
1-4 |
display fr pvc-info |
Frame Relay Commands |
1-6 |
display fr statistics |
Frame Relay Commands |
1-7 |
display fr switch-table |
FR QoS Commands |
1-7 |
display ft1 |
WAN Interface Commands |
1-55 |
display ftp client configuration |
File System Management Commands |
2-13 |
display ftp-server |
File System Management Commands |
2-1 |
display ftp-user |
File System Management Commands |
2-2 |
display history-command |
Basic System Configuration Commands |
1-12 |
display history-command |
User Interface Commands |
1-7 |
display hotkey |
Basic System Configuration Commands |
1-13 |
display hwtacacs |
AAA Commands |
3-1 |
display icmp statistics |
IP Performance Optimization Commands |
1-5 |
display igmp group |
IGMP Commands |
1-1 |
display igmp interface |
IGMP Commands |
1-3 |
display igmp proxying group |
IGMP Commands |
1-5 |
display igmp routing-table |
IGMP Commands |
1-6 |
display igmp ssm-mapping |
IGMP Commands |
1-8 |
display igmp ssm-mapping group |
IGMP Commands |
1-9 |
display ike dpd |
IPsec Commands |
2-4 |
display ike peer |
IPsec Commands |
2-4 |
display ike proposal |
IPsec Commands |
2-5 |
display ike sa |
IPsec Commands |
2-6 |
display info-center |
Information Center Commands |
1-2 |
display interface |
Ethernet Interface Commands |
1-4 |
display interface atm |
ATM Interface Commands |
1-1 |
display interface loopback |
Logical Interface Commands |
1-2 |
display interface mfr |
Frame Relay Commands |
1-8 |
display interface mp-group |
PPP Commands |
1-1 |
display interface null |
Logical Interface Commands |
1-3 |
display interface pos |
POS Interface Commands |
1-2 |
display interface serial |
WAN Interface Commands |
1-5 |
display interface tunnel |
Logical Interface Commands |
1-4 |
display interface virtual-ethernet |
Ethernet Interface Commands |
1-18 |
display interface virtual-template |
PPP Commands |
1-3 |
display ip as-path |
Route Policy Commands |
1-10 |
display ip community-list |
Route Policy Commands |
1-11 |
display ip extcommunity-list |
Route Policy Commands |
1-12 |
display ip host |
DNS Commands |
1-4 |
display ip interface |
IP Addressing Commands |
1-1 |
display ip interface brief |
IP Addressing Commands |
1-3 |
display ip interface pos |
POS Interface Commands |
1-4 |
display ip ip-prefix |
Route Policy Commands |
1-23 |
display ip ipv6-prefix |
Route Policy Commands |
1-28 |
display ip multicast routing-table |
MBGP Commands |
1-9 |
display ip multicast routing-table ip-address |
MBGP Commands |
1-11 |
display ip netstream cache |
NetStream Commands |
1-1 |
display ip netstream export |
NetStream Commands |
1-3 |
display ip netstream template |
NetStream Commands |
1-4 |
display ip policy-based-route |
IP Unicast Policy Routing Commands |
1-5 |
display ip policy-based-route setup |
IP Unicast Policy Routing Commands |
1-6 |
display ip policy-based-route statistics |
IP Unicast Policy Routing Commands |
1-7 |
display ip routing-table |
IP Routing Table Display Commands |
1-1 |
display ip routing-table acl |
IP Routing Table Display Commands |
1-5 |
display ip routing-table ip-address |
IP Routing Table Display Commands |
1-8 |
display ip routing-table ip-prefix |
IP Routing Table Display Commands |
1-10 |
display ip routing-table protocol |
IP Routing Table Display Commands |
1-11 |
display ip routing-table statistics |
IP Routing Table Display Commands |
1-13 |
display ip socket |
IP Performance Optimization Commands |
1-6 |
display ip statistics |
IP Performance Optimization Commands |
1-9 |
display ip virtual-reassembly |
IP Virtual Fragment Reassembly Commands |
1-1 |
display ip vpn-instance |
MPLS L3VPN Commands |
1-26 |
display ipsec policy |
IPsec Commands |
1-2 |
display ipsec policy-template |
IPsec Commands |
1-5 |
display ipsec proposal |
IPsec Commands |
1-6 |
display ipsec sa |
IPsec Commands |
1-7 |
display ipsec statistics |
IPsec Commands |
1-10 |
display ipsec tunnel |
IPsec Commands |
1-11 |
display ipv6 adjacent-table |
Adjacency Table Commands |
1-2 |
display ipv6 config policy-based-route |
IPv6 Unicast Policy Routing Commands |
1-5 |
display ipv6 dhcp duid |
DHCPv6 Commands |
1-1 |
display ipv6 dhcp relay server-address |
DHCPv6 Commands |
1-1 |
display ipv6 dhcp relay statistics |
DHCPv6 Commands |
1-2 |
display ipv6 fib |
IPv6 Basics Commands |
1-3 |
display ipv6 fibcache |
IPv6 Basics Commands |
1-4 |
display ipv6 host |
IPv6 Basics Commands |
1-4 |
display ipv6 interface |
IPv6 Basics Commands |
1-5 |
display ipv6 interface pos |
POS Interface Commands |
1-5 |
display ipv6 interface tunnel |
Logical Interface Commands |
1-6 |
display ipv6 multicast routing-table |
IPv6 MBGP Commands |
1-9 |
display ipv6 multicast routing-table ipv6-address prefix-length |
IPv6 MBGP Commands |
1-11 |
display ipv6 neighbors |
IPv6 Basics Commands |
1-9 |
display ipv6 neighbors count |
IPv6 Basics Commands |
1-10 |
display ipv6 netstream cache |
IPv6 NetStream Commands |
1-1 |
display ipv6 netstream export |
IPv6 NetStream Commands |
1-5 |
display ipv6 netstream template |
IPv6 NetStream Commands |
1-6 |
display ipv6 pathmtu |
IPv6 Basics Commands |
1-11 |
display ipv6 policy-based-route |
IPv6 Unicast Policy Routing Commands |
1-6 |
display ipv6 policy-based-route setup |
IPv6 Unicast Policy Routing Commands |
1-7 |
display ipv6 policy-based-route statistics |
IPv6 Unicast Policy Routing Commands |
1-8 |
display ipv6 routing-table |
IP Routing Table Display Commands |
1-14 |
display ipv6 routing-table acl |
IP Routing Table Display Commands |
1-14 |
display ipv6 routing-table ipv6-address |
IP Routing Table Display Commands |
1-15 |
display ipv6 routing-table ipv6-address1 ipv6-address2 |
IP Routing Table Display Commands |
1-17 |
display ipv6 routing-table ipv6-prefix |
IP Routing Table Display Commands |
1-18 |
display ipv6 routing-table protocol |
IP Routing Table Display Commands |
1-18 |
display ipv6 routing-table statistics |
IP Routing Table Display Commands |
1-19 |
display ipv6 routing-table verbose |
IP Routing Table Display Commands |
1-20 |
display ipv6 socket |
IPv6 Basics Commands |
1-12 |
display isis brief |
IS-IS Commands |
1-6 |
display isis debug-switches |
IS-IS Commands |
1-7 |
display isis graceful-restart status |
IS-IS Commands |
1-7 |
display isis interface |
IS-IS Commands |
1-9 |
display isis lsdb |
IS-IS Commands |
1-12 |
display isis mesh-group |
IS-IS Commands |
1-15 |
display isis name-table |
IS-IS Commands |
1-16 |
display isis peer |
IS-IS Commands |
1-17 |
display isis route |
IS-IS Commands |
1-19 |
display isis route ipv6 |
IPv6 IS-IS Commands |
1-1 |
display isis spf-log |
IS-IS Commands |
1-22 |
display isis statistics |
IS-IS Commands |
1-23 |
display isis traffic-eng advertisements |
MPLS TE Commands |
1-3 |
display isis traffic-eng link |
MPLS TE Commands |
1-6 |
display isis traffic-eng network |
MPLS TE Commands |
1-7 |
display isis traffic-eng statistics |
MPLS TE Commands |
1-9 |
display isis traffic-eng sub-tlvs |
MPLS TE Commands |
1-10 |
display l2tp session |
L2TP Commands |
1-2 |
display l2tp tunnel |
L2TP Commands |
1-3 |
display l2vpn ccc-interface vc-type |
MPLS L2VPN Commands |
1-11 |
display local-user |
AAA Commands |
1-22 |
display logbuffer |
Information Center Commands |
1-4 |
display logbuffer summary |
Information Center Commands |
1-6 |
display logfile buffer |
Information Center Commands |
1-7 |
display logfile summary |
Information Center Commands |
1-8 |
display memory |
Device Management Commands |
1-18 |
display mfr |
Frame Relay Commands |
1-10 |
display mib-style |
SNMP Commands |
2-1 |
display mirroring-group |
Port Mirroring Commands |
1-1 |
display mld group |
MLD Commands |
1-1 |
display mld interface |
MLD Commands |
1-2 |
display mld proxying group |
MLD Commands |
1-4 |
display mld routing-table |
MLD Commands |
1-5 |
display mld ssm-mapping |
MLD Commands |
1-7 |
display mld ssm-mapping group |
MLD Commands |
1-8 |
display mpls ilm |
MPLS Basics Commands |
1-3 |
display mpls interface |
MPLS Basics Commands |
1-4 |
display mpls l2vc |
MPLS L2VPN Commands |
1-13 |
display mpls l2vpn |
MPLS L2VPN Commands |
1-15 |
display mpls l2vpn connection |
MPLS L2VPN Commands |
1-17 |
display mpls l2vpn forwarding-info |
MPLS L2VPN Commands |
1-20 |
display mpls label |
MPLS Basics Commands |
1-5 |
display mpls ldp |
MPLS Basics Commands |
1-7 |
display mpls ldp cr-lsp |
MPLS Basics Commands |
1-8 |
display mpls ldp fec |
MPLS Basics Commands |
1-9 |
display mpls ldp interface |
MPLS Basics Commands |
1-11 |
display mpls ldp lsp |
MPLS Basics Commands |
1-13 |
display mpls ldp peer |
MPLS Basics Commands |
1-14 |
display mpls ldp remote-peer |
MPLS Basics Commands |
1-16 |
display mpls ldp session |
MPLS Basics Commands |
1-18 |
display mpls ldp vpn-instance |
MPLS Basics Commands |
1-21 |
display mpls lsp |
MPLS Basics Commands |
1-22 |
display mpls lsp statistics |
MPLS Basics Commands |
1-25 |
display mpls nhlfe |
MPLS Basics Commands |
1-26 |
display mpls nhlfe reflist |
MPLS Basics Commands |
1-27 |
display mpls route-state |
MPLS Basics Commands |
1-28 |
display mpls rsvp-te |
MPLS TE Commands |
1-11 |
display mpls rsvp-te established |
MPLS TE Commands |
1-13 |
display mpls rsvp-te peer |
MPLS TE Commands |
1-14 |
display mpls rsvp-te psb-content |
MPLS TE Commands |
1-15 |
display mpls rsvp-te request |
MPLS TE Commands |
1-18 |
display mpls rsvp-te reservation |
MPLS TE Commands |
1-19 |
display mpls rsvp-te rsb-content |
MPLS TE Commands |
1-20 |
display mpls rsvp-te sender |
MPLS TE Commands |
1-22 |
display mpls rsvp-te statistics |
MPLS TE Commands |
1-24 |
display mpls static-cr-lsp |
MPLS TE Commands |
1-26 |
display mpls static-l2vc |
MPLS L2VPN Commands |
1-21 |
display mpls static-lsp |
MPLS Basics Commands |
1-29 |
display mpls statistics interface |
MPLS Basics Commands |
1-31 |
display mpls statistics lsp |
MPLS Basics Commands |
1-33 |
display mpls statistics lsp in-label |
MPLS Basics Commands |
1-35 |
display mpls statistics tunnel |
MPLS Basics Commands |
1-36 |
display mpls te cspf tedb |
MPLS TE Commands |
1-28 |
display mpls te link-administration admission-control |
MPLS TE Commands |
1-33 |
display mpls te link-administration bandwidth-allocation |
MPLS TE Commands |
1-34 |
display mpls te tunnel |
MPLS TE Commands |
1-36 |
display mpls te tunnel path |
MPLS TE Commands |
1-38 |
display mpls te tunnel statistics |
MPLS TE Commands |
1-39 |
display mpls te tunnel-interface |
MPLS TE Commands |
1-40 |
display msdp brief |
MSDP Commands |
1-2 |
display msdp peer-status |
MSDP Commands |
1-3 |
display msdp sa-cache |
MSDP Commands |
1-5 |
display msdp sa-count |
MSDP Commands |
1-7 |
display multicast boundary |
Multicast Routing and Forwarding Commands |
1-1 |
display multicast forwarding-table |
Multicast Routing and Forwarding Commands |
1-2 |
display multicast ipv6 boundary |
IPv6 Multicast Routing and Forwarding Commands |
1-1 |
display multicast ipv6 forwarding-table |
IPv6 Multicast Routing and Forwarding Commands |
1-2 |
display multicast ipv6 routing-table |
IPv6 Multicast Routing and Forwarding Commands |
1-4 |
display multicast ipv6 rpf-info |
IPv6 Multicast Routing and Forwarding Commands |
1-6 |
display multicast routing-table |
Multicast Routing and Forwarding Commands |
1-5 |
display multicast routing-table static |
Multicast Routing and Forwarding Commands |
1-6 |
display multicast rpf-info |
Multicast Routing and Forwarding Commands |
1-8 |
display multicast-domain vpn-instance share-group |
Multicast VPN Commands |
1-7 |
display multicast-domain vpn-instance switch-group receive |
Multicast VPN Commands |
1-8 |
display multicast-domain vpn-instance switch-group send |
Multicast VPN Commands |
1-10 |
display nat address-group |
NAT Commands |
1-1 |
display nat all |
NAT Commands |
1-2 |
display nat bound |
NAT Commands |
1-3 |
display nat dns-map |
NAT Commands |
1-4 |
display nat server |
NAT Commands |
1-5 |
display nat session |
NAT Commands |
1-9 |
display nat static |
NAT Commands |
1-6 |
display nat statistics |
NAT Commands |
1-7 |
display natpt address-group |
NAT-PT Commands |
1-1 |
display natpt address-mapping |
NAT-PT Commands |
1-1 |
display natpt all |
NAT-PT Commands |
1-2 |
display natpt statistics |
NAT-PT Commands |
1-4 |
display nqa history |
NQA Commands |
1-6 |
display nqa result |
NQA Commands |
1-7 |
display nqa server status |
NQA Commands |
1-38 |
display nqa statistics |
NQA Commands |
1-11 |
display ntp-service sessions |
NTP Commands |
1-1 |
display ntp-service status |
NTP Commands |
1-2 |
display ntp-service trace |
NTP Commands |
1-4 |
display ospf abr-asbr |
OSPF Commands |
1-8 |
display ospf asbr-summary |
OSPF Commands |
1-9 |
display ospf brief |
OSPF Commands |
1-11 |
display ospf cumulative |
OSPF Commands |
1-13 |
display ospf error |
OSPF Commands |
1-15 |
display ospf interface |
OSPF Commands |
1-17 |
display ospf lsdb |
OSPF Commands |
1-18 |
display ospf mpls-te |
MPLS TE Commands |
1-42 |
display ospf nexthop |
OSPF Commands |
1-21 |
display ospf peer |
OSPF Commands |
1-22 |
display ospf peer statistics |
OSPF Commands |
1-24 |
display ospf request-queue |
OSPF Commands |
1-25 |
display ospf retrans-queue |
OSPF Commands |
1-26 |
display ospf routing |
OSPF Commands |
1-27 |
display ospf sham-link |
MPLS L3VPN Commands |
1-27 |
display ospf traffic-adjustment |
MPLS TE Commands |
1-45 |
display ospf vlink |
OSPF Commands |
1-28 |
display ospfv3 |
OSPFv3 Commands |
1-6 |
display ospfv3 graceful-restart status |
OSPFv3 Commands |
1-7 |
display ospfv3 interface |
OSPFv3 Commands |
1-8 |
display ospfv3 lsdb |
OSPFv3 Commands |
1-10 |
display ospfv3 lsdb statistic |
OSPFv3 Commands |
1-14 |
display ospfv3 next-hop |
OSPFv3 Commands |
1-15 |
display ospfv3 peer |
OSPFv3 Commands |
1-15 |
display ospfv3 peer statistic |
OSPFv3 Commands |
1-17 |
display ospfv3 request-list |
OSPFv3 Commands |
1-18 |
display ospfv3 retrans-list |
OSPFv3 Commands |
1-20 |
display ospfv3 routing |
OSPFv3 Commands |
1-21 |
display ospfv3 statistic |
OSPFv3 Commands |
1-23 |
display ospfv3 topology |
OSPFv3 Commands |
1-24 |
display ospfv3 vlink |
OSPFv3 Commands |
1-25 |
display patch information |
Hotfix Commands |
1-1 |
display pim bsr-info |
PIM Commands |
1-11 |
display pim claimed-route |
PIM Commands |
1-13 |
display pim control-message counters |
PIM Commands |
1-14 |
display pim grafts |
PIM Commands |
1-16 |
display pim interface |
PIM Commands |
1-17 |
display pim ipv6 bsr-info |
IPv6 PIM Commands |
1-8 |
display pim ipv6 claimed-route |
IPv6 PIM Commands |
1-10 |
display pim ipv6 control-message counters |
IPv6 PIM Commands |
1-11 |
display pim ipv6 grafts |
IPv6 PIM Commands |
1-13 |
display pim ipv6 interface |
IPv6 PIM Commands |
1-13 |
display pim ipv6 join-prune |
IPv6 PIM Commands |
1-15 |
display pim ipv6 neighbor |
IPv6 PIM Commands |
1-16 |
display pim ipv6 routing-table |
IPv6 PIM Commands |
1-18 |
display pim ipv6 rp-info |
IPv6 PIM Commands |
1-20 |
display pim join-prune |
PIM Commands |
1-19 |
display pim neighbor |
PIM Commands |
1-21 |
display pim routing-table |
PIM Commands |
1-22 |
display pim rp-info |
PIM Commands |
1-25 |
display pki certificate |
PKI Commands |
1-9 |
display pki certificate access-control-policy |
PKI Commands |
1-11 |
display pki certificate attribute-group |
PKI Commands |
1-11 |
display pki crl domain |
PKI Commands |
1-12 |
display policy-based-route |
IP Unicast Policy Routing Commands |
1-8 |
display portal acl |
Portal Commands |
1-1 |
display portal connection statistics |
Portal Commands |
1-4 |
display portal free-rule |
Portal Commands |
1-7 |
display portal interface |
Portal Commands |
1-8 |
display portal server |
Portal Commands |
1-9 |
display portal server statistics |
Portal Commands |
1-10 |
display portal tcp-cheat statistics |
Portal Commands |
1-11 |
display portal user |
Portal Commands |
1-13 |
display port-mapping |
Firewall Commands |
1-11 |
display power |
Device Management Commands |
1-18 |
display power-supply |
Device Management Commands |
1-19 |
display ppp mp |
PPP Commands |
1-5 |
display pppoe-server session |
PPP Commands |
2-1 |
display proxy-arp |
ARP Commands |
2-1 |
display public-key local |
Public Key Commands |
1-1 |
display public-key peer |
Public Key Commands |
1-2 |
display qos car interface |
QoS Commands |
2-1 |
display qos carl |
QoS Commands |
2-2 |
display qos cbq interface |
QoS Commands |
3-15 |
display qos cq interface |
QoS Commands |
3-7 |
display qos cql |
QoS Commands |
3-8 |
display qos gts interface |
QoS Commands |
2-7 |
display qos lr interface |
QoS Commands |
2-9 |
display qos policy |
QoS Commands |
1-16 |
display qos policy interface |
QoS Commands |
1-17 |
display qos policy interface |
FR QoS Commands |
1-8 |
display qos pq interface |
QoS Commands |
3-2 |
display qos pql |
QoS Commands |
3-3 |
display qos rtpq interface |
QoS Commands |
3-25 |
display qos wfq interface |
QoS Commands |
3-13 |
display qos wred interface |
QoS Commands |
4-1 |
display radius scheme |
AAA Commands |
2-4 |
display radius statistics |
AAA Commands |
2-6 |
display reboot-type |
Device Management Commands |
1-20 |
display rip |
RIP Commands |
1-3 |
display rip database |
RIP Commands |
1-5 |
display rip interface |
RIP Commands |
1-6 |
display rip route |
RIP Commands |
1-7 |
display ripng |
RIPng Commands |
1-2 |
display ripng database |
RIPng Commands |
1-3 |
display ripng interface |
RIPng Commands |
1-4 |
display ripng route |
RIPng Commands |
1-5 |
display rmon alarm |
RMON Commands |
1-1 |
display rmon event |
RMON Commands |
1-2 |
display rmon eventlog |
RMON Commands |
1-3 |
display rmon history |
RMON Commands |
1-4 |
display rmon prialarm |
RMON Commands |
1-6 |
display rmon statistics |
RMON Commands |
1-8 |
display route-policy |
Route Policy Commands |
1-12 |
display router id |
IP Routing Table Display Commands |
1-21 |
display rps |
Device Management Commands |
1-21 |
display sampler |
Sampler Commands |
1-1 |
display saved-configuration |
File System Management Commands |
1-16 |
display schedule job |
Device Management Commands |
1-21 |
display schedule reboot |
Device Management Commands |
1-22 |
display session relation-table |
Session Management Commands |
1-2 |
display session statistics |
Session Management Commands |
1-3 |
display session table |
Session Management Commands |
1-5 |
display sftp client source |
SSH2.0 Commands |
1-19 |
display snmp-agent community |
SNMP Commands |
1-1 |
display snmp-agent group |
SNMP Commands |
1-2 |
display snmp-agent local-engineid |
SNMP Commands |
1-3 |
display snmp-agent mib-view |
SNMP Commands |
1-3 |
display snmp-agent statistics |
SNMP Commands |
1-5 |
display snmp-agent sys-info |
SNMP Commands |
1-7 |
display snmp-agent trap queue |
SNMP Commands |
1-7 |
display snmp-agent trap-list |
SNMP Commands |
1-8 |
display snmp-agent usm-user |
SNMP Commands |
1-9 |
display ssh client source |
SSH2.0 Commands |
1-8 |
display ssh server |
SSH2.0 Commands |
1-1 |
display ssh server-info |
SSH2.0 Commands |
1-9 |
display ssh user-information |
SSH2.0 Commands |
1-2 |
display startup |
File System Management Commands |
1-17 |
display stop-accounting-buffer |
AAA Commands |
2-12 |
display stop-accounting-buffer |
AAA Commands |
3-4 |
display switchover state |
HA Commands |
1-1 |
display system-failure |
Device Management Commands |
1-22 |
display tcp ipv6 statistics |
IPv6 Basics Commands |
1-14 |
display tcp ipv6 status |
IPv6 Basics Commands |
1-16 |
display tcp statistics |
IP Performance Optimization Commands |
1-10 |
display tcp status |
IP Performance Optimization Commands |
1-13 |
display telnet client configuration |
Telnet Configuration Commands |
1-1 |
display tftp client configuration |
File System Management Commands |
3-1 |
display this |
Basic System Configuration Commands |
1-14 |
display time-range |
ACL Commands |
1-1 |
display track |
Track Commands |
1-1 |
display traffic behavior |
QoS Commands |
1-8 |
display traffic classifier |
QoS Commands |
1-1 |
display transceiver |
Device Management Commands |
1-27 |
display transceiver alarm |
Device Management Commands |
1-23 |
display transceiver diagnosis |
Device Management Commands |
1-26 |
display transceiver manuinfo |
Device Management Commands |
1-29 |
display trapbuffer |
Information Center Commands |
1-9 |
display tunnel-info |
MPLS TE Commands |
1-46 |
display tunnel-policy |
MPLS L3VPN Commands |
1-29 |
display udp ipv6 statistics |
IPv6 Basics Commands |
1-16 |
display udp statistics |
IP Performance Optimization Commands |
1-14 |
display udp-helper server |
UDP Helper Commands |
1-1 |
display user-group |
AAA Commands |
1-25 |
display user-interface |
User Interface Commands |
1-7 |
display userlog export |
NAT Commands |
1-8 |
display userlog export |
Flow Log Commands |
1-1 |
display user-profile |
User Profile Commands |
1-1 |
display users |
User Interface Commands |
1-9 |
display version |
Basic System Configuration Commands |
1-15 |
display virtual-access |
PPP Commands |
1-4 |
display vpn label operation |
MPLS L3VPN Commands |
1-29 |
display vrrp |
VRRP Commands |
1-1 |
display vrrp ipv6 |
VRRP Commands |
1-13 |
display vrrp ipv6 statistics |
VRRP Commands |
1-16 |
display vrrp statistics |
VRRP Commands |
1-3 |
dns domain |
DNS Commands |
1-4 |
dns proxy enable |
DNS Commands |
1-5 |
dns resolve |
DNS Commands |
1-6 |
dns server |
DNS Commands |
1-6 |
dns server ipv6 |
IPv6 Basics Commands |
1-17 |
dns-list |
DHCP Commands |
1-14 |
domain |
AAA Commands |
1-25 |
domain default enable |
AAA Commands |
1-26 |
domain-authentication-mode |
IS-IS Commands |
1-25 |
domain-id |
MPLS L3VPN Commands |
1-30 |
domain-name |
DHCP Commands |
1-15 |
dot1q ethernet-type |
VLAN Termination Commands |
1-1 |
dpd |
IPsec Commands |
2-10 |
duplex |
Ethernet Interface Commands |
1-9 |
du-readvertise |
MPLS Basics Commands |
1-37 |
du-readvertise timer |
MPLS Basics Commands |
1-38 |
|
|
|
e1 bert |
WAN Interface Commands |
1-72 |
e1 channel-set |
CPOS Interface Commands |
1-12 |
e1 channel-set |
WAN Interface Commands |
1-73 |
e1 set clock |
CPOS Interface Commands |
1-13 |
e1 set clock |
WAN Interface Commands |
1-74 |
e1 set flag |
CPOS Interface Commands |
1-14 |
e1 set frame-format |
CPOS Interface Commands |
1-15 |
e1 set frame-format |
WAN Interface Commands |
1-75 |
e1 set loopback |
CPOS Interface Commands |
1-15 |
e1 set loopback |
WAN Interface Commands |
1-75 |
e1 shutdown |
CPOS Interface Commands |
1-16 |
e1 shutdown |
WAN Interface Commands |
1-76 |
e1 unframed |
CPOS Interface Commands |
1-17 |
e1 unframed |
WAN Interface Commands |
1-76 |
e3 set clock |
CPOS Interface Commands |
1-17 |
e3 set loopback |
CPOS Interface Commands |
1-18 |
e3 set national-bit |
CPOS Interface Commands |
1-19 |
e3 shutdown |
CPOS Interface Commands |
1-20 |
ebgp-interface-sensitive |
BGP Commands |
1-30 |
ebs |
FR QoS Commands |
1-10 |
embedded-rp |
IPv6 PIM Commands |
1-21 |
enable |
NetStream Commands |
1-6 |
enable |
IPv6 NetStream Commands |
1-8 |
enable link-local-signaling |
OSPF Commands |
1-29 |
enable log |
OSPF Commands |
1-30 |
enable log updown |
Information Center Commands |
1-10 |
enable out-of-band-resynchronization |
OSPF Commands |
1-31 |
enable snmp trap updown |
SNMP Commands |
1-10 |
enable traffic-adjustment |
MPLS TE Commands |
1-47 |
enable traffic-adjustment advertise |
MPLS TE Commands |
1-48 |
encap-data-enable |
MSDP Commands |
1-8 |
encapsulation |
ATM Commands |
1-11 |
encapsulation-mode |
IPsec Commands |
1-13 |
encryption-algorithm |
IPsec Commands |
2-10 |
error-diffusion restraint config |
WAN Interface Commands |
1-23 |
error-diffusion restraint enable |
WAN Interface Commands |
1-24 |
escape-key |
User Interface Commands |
1-10 |
esp authentication-algorithm |
IPsec Commands |
1-13 |
esp encryption-algorithm |
IPsec Commands |
1-14 |
exchange-mode |
IPsec Commands |
2-11 |
execute |
File System Management Commands |
1-4 |
exit |
SSH2.0 Commands |
1-19 |
expiration-date |
AAA Commands |
1-27 |
expired |
DHCP Commands |
1-16 |
explicit-path |
MPLS TE Commands |
1-48 |
export route-policy |
MPLS L3VPN Commands |
1-31 |
ext-community-type |
MPLS L3VPN Commands |
1-31 |
|
|
|
fast-leave (IGMP view) |
IGMP Commands |
1-11 |
fast-leave (MLD view) |
MLD Commands |
1-9 |
fdl |
WAN Interface Commands |
1-39 |
fe1 alarm |
WAN Interface Commands |
1-46 |
fe1 cable |
WAN Interface Commands |
1-46 |
fe1 clock |
WAN Interface Commands |
1-47 |
fe1 code |
WAN Interface Commands |
1-48 |
fe1 data-coding |
WAN Interface Commands |
1-48 |
fe1 detect-ais |
WAN Interface Commands |
1-49 |
fe1 frame-format |
WAN Interface Commands |
1-49 |
fe1 idlecode |
WAN Interface Commands |
1-50 |
fe1 itf |
WAN Interface Commands |
1-50 |
fe1 loopback |
WAN Interface Commands |
1-51 |
fe1 timeslot-list |
WAN Interface Commands |
1-52 |
fe1 unframed |
WAN Interface Commands |
1-53 |
fe3 |
WAN Interface Commands |
1-77 |
fe3 dsu-mode |
CPOS Interface Commands |
1-20 |
feac |
WAN Interface Commands |
1-90 |
fifo queue-length |
FR QoS Commands |
1-11 |
file prompt |
File System Management Commands |
1-5 |
filename |
NQA Commands |
1-15 |
filter |
OSPF Commands |
1-31 |
filter |
QoS Commands |
1-9 |
filter-policy export |
RIPng Commands |
1-7 |
filter-policy export (BGP/BGP-VPN instance view) |
BGP Commands |
1-31 |
filter-policy export (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-32 |
filter-policy export (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-26 |
filter-policy export (IS-IS view) |
IS-IS Commands |
1-26 |
filter-policy export (MBGP family view) |
MBGP Commands |
1-28 |
filter-policy export (OSPF view) |
OSPF Commands |
1-32 |
filter-policy export (OSPFv3 view) |
OSPFv3 Commands |
1-26 |
filter-policy export (RIP view) |
RIP Commands |
1-9 |
filter-policy export(IPv6 address family view) |
IPv6 BGP Commands |
1-25 |
filter-policy import (BGP/BGP-VPN instance view) |
BGP Commands |
1-32 |
filter-policy import (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-33 |
filter-policy import (IPv6 address family view) |
IPv6 BGP Commands |
1-25 |
filter-policy import (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-27 |
filter-policy import (IS-IS view) |
IS-IS Commands |
1-27 |
filter-policy import (MBGP Family view) |
MBGP Commands |
1-29 |
filter-policy import (OSPF view) |
OSPF Commands |
1-33 |
filter-policy import (OSPFv3 view) |
OSPFv3 Commands |
1-27 |
filter-policy import (RIP view) |
RIP Commands |
1-10 |
filter-policy import (RIPng view) |
RIPng Commands |
1-7 |
firewall aspf |
Firewall Commands |
1-12 |
firewall default |
Firewall Commands |
1-3 |
firewall enable |
Firewall Commands |
1-3 |
firewall http activex-blocking acl |
WEB Filtering Commands |
1-5 |
firewall http activex-blocking enable |
WEB Filtering Commands |
1-6 |
firewall http activex-blocking suffix |
WEB Filtering Commands |
1-7 |
firewall http java-blocking acl |
WEB Filtering Commands |
1-7 |
firewall http java-blocking enable |
WEB Filtering Commands |
1-8 |
firewall http java-blocking suffix |
WEB Filtering Commands |
1-9 |
firewall http url-filter host acl |
WEB Filtering Commands |
1-9 |
firewall http url-filter host default |
WEB Filtering Commands |
1-10 |
firewall http url-filter host enable |
WEB Filtering Commands |
1-11 |
firewall http url-filter host ip-address |
WEB Filtering Commands |
1-11 |
firewall http url-filter host load |
WEB Filtering Commands |
1-12 |
firewall http url-filter host save |
WEB Filtering Commands |
1-12 |
firewall http url-filter host url-address |
WEB Filtering Commands |
1-13 |
firewall http url-filter parameter |
WEB Filtering Commands |
1-14 |
firewall http url-filter parameter enable |
WEB Filtering Commands |
1-15 |
firewall http url-filter parameter load |
WEB Filtering Commands |
1-16 |
firewall http url-filter parameter save |
WEB Filtering Commands |
1-16 |
firewall ipv6 default |
Firewall Commands |
1-4 |
firewall ipv6 enable |
Firewall Commands |
1-4 |
firewall packet-filter |
Firewall Commands |
1-5 |
firewall packet-filter ipv6 |
Firewall Commands |
1-6 |
fixdisk |
File System Management Commands |
1-6 |
flag |
CPOS Interface Commands |
1-21 |
flag |
POS Interface Commands |
1-6 |
flag j0 |
E-CPOS Interface Commands |
1-3 |
flag sdh |
Ethernet Interface Commands |
1-9 |
flag vc-3 |
CPOS Interface Commands |
1-23 |
flag vc-4 |
CPOS Interface Commands |
1-23 |
flash-flood |
IS-IS Commands |
1-28 |
flow-control |
Ethernet Interface Commands |
1-10 |
flow-control |
User Interface Commands |
1-12 |
format |
File System Management Commands |
1-6 |
forwarding policy |
Flow Classification Commands |
1-1 |
fqdn |
PKI Commands |
1-14 |
fr class |
FR QoS Commands |
1-11 |
fr congestion-threshold |
FR QoS Commands |
1-12 |
fr de del |
FR QoS Commands |
1-13 |
fr del inbound-interface |
FR QoS Commands |
1-14 |
fr del protocol |
FR QoS Commands |
1-15 |
fr dlci |
Frame Relay Commands |
1-12 |
fr inarp |
Frame Relay Commands |
1-13 |
fr interface-type |
Frame Relay Commands |
1-14 |
fr lmi n391dte |
Frame Relay Commands |
1-15 |
fr lmi n392dce |
Frame Relay Commands |
1-15 |
fr lmi n392dte |
Frame Relay Commands |
1-16 |
fr lmi n393dce |
Frame Relay Commands |
1-17 |
fr lmi n393dte |
Frame Relay Commands |
1-18 |
fr lmi t392dce |
Frame Relay Commands |
1-19 |
fr lmi type |
Frame Relay Commands |
1-20 |
fr map ip |
Frame Relay Commands |
1-20 |
fr switch |
Frame Relay Commands |
1-21 |
fr switching |
Frame Relay Commands |
1-22 |
fr traffic-policing |
FR QoS Commands |
1-16 |
fr traffic-shaping |
FR QoS Commands |
1-17 |
fragment |
FR QoS Commands |
1-17 |
frame-format |
CPOS Interface Commands |
1-24 |
frame-format |
POS Interface Commands |
1-7 |
frame-format |
ATM Interface Commands |
1-5 |
frame-format |
E-CPOS Interface Commands |
1-4 |
frame-format (CE1 interface) |
WAN Interface Commands |
1-24 |
frame-format (CT1 interface) |
WAN Interface Commands |
1-40 |
frame-format (CT3 interface) |
WAN Interface Commands |
1-91 |
fr-class |
FR QoS Commands |
1-18 |
free ftp user |
File System Management Commands |
2-3 |
free user-interface |
User Interface Commands |
1-13 |
frequency |
NQA Commands |
1-15 |
ft1 alarm |
WAN Interface Commands |
1-54 |
ft1 alarm-threshold |
WAN Interface Commands |
1-58 |
ft1 bert |
WAN Interface Commands |
1-59 |
ft1 cable |
WAN Interface Commands |
1-60 |
ft1 clock |
WAN Interface Commands |
1-60 |
ft1 code |
WAN Interface Commands |
1-61 |
ft1 data-coding |
WAN Interface Commands |
1-62 |
ft1 fdl |
WAN Interface Commands |
1-62 |
ft1 frame-format |
WAN Interface Commands |
1-63 |
ft1 idlecode |
WAN Interface Commands |
1-64 |
ft1 itf |
WAN Interface Commands |
1-64 |
ft1 loopback |
WAN Interface Commands |
1-65 |
ft1 sendloopcode |
WAN Interface Commands |
1-66 |
ft1 timeslot-list |
WAN Interface Commands |
1-67 |
ft3 |
WAN Interface Commands |
1-92 |
ft3 dsu-mode |
CPOS Interface Commands |
1-25 |
ftp |
File System Management Commands |
2-14 |
ftp client source |
File System Management Commands |
2-15 |
ftp ipv6 |
File System Management Commands |
2-16 |
ftp server acl |
File System Management Commands |
2-3 |
ftp server enable |
File System Management Commands |
2-4 |
ftp timeout |
File System Management Commands |
2-4 |
ftp update |
File System Management Commands |
2-5 |
|
|
|
gateway-list |
DHCP Commands |
1-16 |
get |
SSH2.0 Commands |
1-20 |
get |
File System Management Commands |
2-17 |
graceful-restart (BGP view) |
BGP Commands |
1-33 |
graceful-restart (IS-IS view) |
IS-IS Commands |
1-29 |
graceful-restart (MPLS LDP view) |
MPLS Basics Commands |
1-39 |
graceful-restart (OSPF view) |
OSPF Commands |
1-34 |
graceful-restart enable |
OSPFv3 Commands |
1-28 |
graceful-restart help |
OSPF Commands |
1-35 |
graceful-restart helper enable |
OSPFv3 Commands |
1-29 |
graceful-restart helper strict-lsa-checking |
OSPFv3 Commands |
1-29 |
graceful-restart interval |
OSPFv3 Commands |
1-30 |
graceful-restart interval (IS-IS view) |
IS-IS Commands |
1-29 |
graceful-restart interval (OSPF view) |
OSPF Commands |
1-36 |
graceful-restart mpls ldp |
MPLS Basics Commands |
1-39 |
graceful-restart suppress-sa |
IS-IS Commands |
1-30 |
graceful-restart timer neighbor-liveness |
MPLS Basics Commands |
1-40 |
graceful-restart timer reconnect |
MPLS Basics Commands |
1-41 |
graceful-restart timer recovery |
MPLS Basics Commands |
1-41 |
graceful-restart timer restart |
BGP Commands |
1-33 |
graceful-restart timer wait-for-rib |
BGP Commands |
1-34 |
gratuitous-arp-learning enable |
ARP Commands |
1-9 |
gratuitous-arp-sending enable |
ARP Commands |
1-8 |
gre checksum |
GRE Commands |
1-1 |
gre key |
GRE Commands |
1-1 |
group |
AAA Commands |
1-28 |
group (BGP/BGP-VPN instance view) |
BGP Commands |
1-35 |
group (IPv6 address family view) |
IPv6 BGP Commands |
1-26 |
gts |
QoS Commands |
1-10 |
|
|
|
ha slave-ignore-version-check |
HA Commands |
1-2 |
header |
Basic System Configuration Commands |
1-15 |
hello-option dr-priority (IPv6 PIM view) |
IPv6 PIM Commands |
1-22 |
hello-option dr-priority (PIM view) |
PIM Commands |
1-26 |
hello-option holdtime (IPv6 PIM view) |
IPv6 PIM Commands |
1-23 |
hello-option holdtime (PIM view) |
PIM Commands |
1-27 |
hello-option lan-delay (IPv6 PIM view) |
IPv6 PIM Commands |
1-23 |
hello-option lan-delay (PIM view) |
PIM Commands |
1-28 |
hello-option neighbor-tracking (IPv6 PIM view) |
IPv6 PIM Commands |
1-24 |
hello-option neighbor-tracking (PIM view) |
PIM Commands |
1-28 |
hello-option override-interval (IPv6 PIM view) |
IPv6 PIM Commands |
1-25 |
hello-option override-interval (PIM view) |
PIM Commands |
1-29 |
help |
SSH2.0 Commands |
1-20 |
history-command max-size |
User Interface Commands |
1-14 |
history-record enable |
NQA Commands |
1-16 |
history-record keep-time |
NQA Commands |
1-17 |
history-record number |
NQA Commands |
1-17 |
holdtime assert (IPv6 PIM view) |
IPv6 PIM Commands |
1-25 |
holdtime assert (PIM view) |
PIM Commands |
1-30 |
holdtime join-prune (IPv6 PIM view) |
IPv6 PIM Commands |
1-26 |
holdtime join-prune (PIM view) |
PIM Commands |
1-30 |
hops-count |
MPLS Basics Commands |
1-42 |
host-advertise |
OSPF Commands |
1-36 |
host-route |
RIP Commands |
1-11 |
hotkey |
Basic System Configuration Commands |
1-17 |
http-version |
NQA Commands |
1-18 |
hwtacacs nas-ip |
AAA Commands |
3-4 |
hwtacacs scheme |
AAA Commands |
3-5 |
|
|
|
icmp-error drop |
Firewall Commands |
1-12 |
idlecode (CE1 interface) |
WAN Interface Commands |
1-25 |
idlecode (CT1 interface) |
WAN Interface Commands |
1-40 |
idle-cut enable |
AAA Commands |
1-28 |
idle-mark |
WAN Interface Commands |
1-8 |
idle-timeout |
User Interface Commands |
1-15 |
id-type |
IPsec Commands |
2-12 |
if-match |
QoS Commands |
1-2 |
if-match acl |
IP Unicast Policy Routing Commands |
1-8 |
if-match acl |
Route Policy Commands |
1-24 |
if-match acl6 |
IPv6 Unicast Policy Routing Commands |
1-9 |
if-match as-path |
Route Policy Commands |
1-13 |
if-match community |
Route Policy Commands |
1-14 |
if-match cost |
Route Policy Commands |
1-14 |
if-match extcommunity |
Route Policy Commands |
1-15 |
if-match interface |
Route Policy Commands |
1-16 |
if-match ip |
Route Policy Commands |
1-24 |
if-match ip-prefix |
Route Policy Commands |
1-25 |
if-match ipv6 |
Route Policy Commands |
1-29 |
if-match mpls-exp |
QoS Commands |
5-1 |
if-match mpls-label |
Route Policy Commands |
1-17 |
if-match packet-length |
IP Unicast Policy Routing Commands |
1-9 |
if-match packet-length |
IPv6 Unicast Policy Routing Commands |
1-10 |
if-match reverse-input-interface |
IP Unicast Policy Routing Commands |
1-9 |
if-match route-type |
Route Policy Commands |
1-17 |
if-match tag |
Route Policy Commands |
1-18 |
igmp |
IGMP Commands |
1-12 |
igmp enable |
IGMP Commands |
1-12 |
igmp fast-leave |
IGMP Commands |
1-13 |
igmp group-limit |
IGMP Commands |
1-14 |
igmp group-policy |
IGMP Commands |
1-15 |
igmp last-member-query-interval |
IGMP Commands |
1-16 |
igmp max-response-time |
IGMP Commands |
1-17 |
igmp proxying enable |
IGMP Commands |
1-17 |
igmp proxying forwarding |
IGMP Commands |
1-18 |
igmp require-router-alert |
IGMP Commands |
1-19 |
igmp robust-count |
IGMP Commands |
1-19 |
igmp send-router-alert |
IGMP Commands |
1-20 |
igmp ssm-mapping enable |
IGMP Commands |
1-21 |
igmp startup-query-count |
IGMP Commands |
1-21 |
igmp startup-query-interval |
IGMP Commands |
1-22 |
igmp static-group |
IGMP Commands |
1-23 |
igmp timer other-querier-present |
IGMP Commands |
1-24 |
igmp timer query |
IGMP Commands |
1-25 |
igmp version |
IGMP Commands |
1-25 |
ike dpd |
IPsec Commands |
2-12 |
ike local-name |
IPsec Commands |
2-13 |
ike next-payload check disabled |
IPsec Commands |
2-14 |
ike peer (system view) |
IPsec Commands |
2-14 |
ike proposal |
IPsec Commands |
2-15 |
ike sa keepalive-timer interval |
IPsec Commands |
2-16 |
ike sa keepalive-timer timeout |
IPsec Commands |
2-16 |
ike sa nat-keepalive-timer interval |
IPsec Commands |
2-17 |
ike-peer (IPsec policy view, IPsec policy template view) |
IPsec Commands |
1-15 |
import route-policy |
MPLS L3VPN Commands |
1-34 |
import-route |
RIPng Commands |
1-8 |
import-route (BGP/BGP-VPN instance view) |
BGP Commands |
1-36 |
import-route (IPv6 address family view) |
IPv6 BGP Commands |
1-27 |
import-route (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-28 |
import-route (IS-IS view) |
IS-IS Commands |
1-30 |
import-route (MBGP family view) |
MBGP Commands |
1-30 |
import-route (OSPF view) |
OSPF Commands |
1-37 |
import-route (OSPFv3 view) |
OSPFv3 Commands |
1-30 |
import-route (RIP view) |
RIP Commands |
1-12 |
import-route isis level-2 into level-1 |
IS-IS Commands |
1-32 |
import-route limit (IS-IS view) |
IS-IS Commands |
1-33 |
import-source |
MSDP Commands |
1-9 |
info-center channel name |
Information Center Commands |
1-11 |
info-center console channel |
Information Center Commands |
1-11 |
info-center enable |
Information Center Commands |
1-12 |
info-center logbuffer |
Information Center Commands |
1-13 |
info-center logfile enable |
Information Center Commands |
1-13 |
info-center logfile frequency |
Information Center Commands |
1-14 |
info-center logfile size-quota |
Information Center Commands |
1-15 |
info-center logfile switch-directory |
Information Center Commands |
1-15 |
info-center loghost |
Information Center Commands |
1-16 |
info-center loghost source |
Information Center Commands |
1-17 |
info-center monitor channel |
Information Center Commands |
1-18 |
info-center snmp channel |
Information Center Commands |
1-19 |
info-center source |
Information Center Commands |
1-19 |
info-center synchronous |
Information Center Commands |
1-22 |
info-center timestamp |
Information Center Commands |
1-23 |
info-center timestamp loghost |
Information Center Commands |
1-24 |
info-center trapbuffer |
Information Center Commands |
1-25 |
interface |
Ethernet Interface Commands |
1-11 |
interface atm |
ATM Interface Commands |
1-2 |
interface atm |
ATM Commands |
1-12 |
interface loopback |
Logical Interface Commands |
1-9 |
interface mfr |
Frame Relay Commands |
1-23 |
interface mp-group |
PPP Commands |
1-6 |
interface null |
Logical Interface Commands |
1-11 |
interface serial |
Frame Relay Commands |
1-24 |
interface tunnel |
Logical Interface Commands |
1-10 |
interface virtual-ethernet |
Ethernet Interface Commands |
1-19 |
interface virtual-template |
PPP Commands |
1-7 |
interface virtual-template |
L2TP Commands |
1-4 |
interval-time |
IPsec Commands |
2-17 |
invert receive-clock |
WAN Interface Commands |
1-8 |
invert transmit-clock |
WAN Interface Commands |
1-9 |
ip (PKI entity view) |
PKI Commands |
1-14 |
ip address |
IP Addressing Commands |
1-4 |
ip address dhcp-alloc |
DHCP Commands |
3-3 |
ip address ppp-negotiate |
PPP Commands |
1-8 |
ip address unnumbered |
IP Addressing Commands |
1-5 |
ip as-path |
Route Policy Commands |
1-19 |
ip binding vpn-instance |
MPLS L3VPN Commands |
1-35 |
ip community-list |
Route Policy Commands |
1-19 |
ip extcommunity-list |
Route Policy Commands |
1-20 |
ip forward-broadcast |
IP Performance Optimization Commands |
1-15 |
ip host |
DNS Commands |
1-7 |
ip ip-prefix |
Route Policy Commands |
1-26 |
ip ipv6-prefix |
Route Policy Commands |
1-30 |
ip load-sharing mode per-flow |
IP Performance Optimization Commands |
1-24 |
ip local policy-based-route |
IP Unicast Policy Routing Commands |
1-10 |
ip netstream |
NetStream Commands |
1-6 |
ip netstream aggregation |
NetStream Commands |
1-7 |
ip netstream export host |
NetStream Commands |
1-8 |
ip netstream export rate |
NetStream Commands |
1-9 |
ip netstream export source |
NetStream Commands |
1-10 |
ip netstream export v9-template refresh-rate packet |
NetStream Commands |
1-10 |
ip netstream export v9-template refresh-rate time |
NetStream Commands |
1-11 |
ip netstream export version |
NetStream Commands |
1-12 |
ip netstream filter |
NetStream Commands |
1-13 |
ip netstream max-entry |
NetStream Commands |
1-13 |
ip netstream mpls |
NetStream Commands |
1-14 |
ip netstream sampler |
NetStream Commands |
1-15 |
ip netstream timeout active |
NetStream Commands |
1-15 |
ip netstream timeout inactive |
NetStream Commands |
1-16 |
ip policy-based-route |
IP Unicast Policy Routing Commands |
1-11 |
ip pool |
AAA Commands |
1-29 |
ip redirects enable |
IP Performance Optimization Commands |
1-15 |
ip route-static |
Static Routing Commands |
1-1 |
ip route-static default-preference |
Static Routing Commands |
1-4 |
ip rpf-route-static |
Multicast Routing and Forwarding Commands |
1-9 |
ip ttl-expires enable |
IP Performance Optimization Commands |
1-16 |
ip unreachables enable |
IP Performance Optimization Commands |
1-16 |
ip urpf |
URPF Commands |
1-1 |
ip virtual-reassembly |
IP Virtual Fragment Reassembly Commands |
1-2 |
ip vpn-instance |
MPLS L3VPN Commands |
1-35 |
ip-precedence |
ATM Commands |
1-13 |
ipsec anti-replay check |
IPsec Commands |
1-15 |
ipsec anti-replay window |
IPsec Commands |
1-16 |
ipsec decrypt check |
IPsec Commands |
1-17 |
ipsec policy (interface view) |
IPsec Commands |
1-17 |
ipsec policy (system view) |
IPsec Commands |
1-18 |
ipsec policy isakmp template |
IPsec Commands |
1-19 |
ipsec policy-template |
IPsec Commands |
1-20 |
ipsec proposal |
IPsec Commands |
1-21 |
ipsec sa global-duration |
IPsec Commands |
1-21 |
ipv4-family |
MPLS L3VPN Commands |
1-36 |
ipv4-family mdt |
Multicast VPN Commands |
1-12 |
ipv4-family multicast |
MBGP Commands |
1-31 |
ipv6 |
IPv6 Basics Commands |
1-18 |
ipv6 address |
IPv6 Basics Commands |
1-19 |
ipv6 address auto link-local |
IPv6 Basics Commands |
1-19 |
ipv6 address eui-64 |
IPv6 Basics Commands |
1-20 |
ipv6 address link-local |
IPv6 Basics Commands |
1-21 |
ipv6 default-route-advertise |
IPv6 IS-IS Commands |
1-3 |
ipv6 dhcp relay server-address |
DHCPv6 Commands |
1-4 |
ipv6 enable |
IPv6 IS-IS Commands |
1-4 |
ipv6 fibcache |
IPv6 Basics Commands |
1-22 |
ipv6 filter-policy export |
IPv6 IS-IS Commands |
1-5 |
ipv6 filter-policy import |
IPv6 IS-IS Commands |
1-6 |
ipv6 host |
IPv6 Basics Commands |
1-22 |
ipv6 icmp-error |
IPv6 Basics Commands |
1-23 |
ipv6 icmpv6 multicast-echo-reply enable |
IPv6 Basics Commands |
1-24 |
ipv6 import-route |
IPv6 IS-IS Commands |
1-7 |
ipv6 import-route isisv6 level-2 into level-1 |
IPv6 IS-IS Commands |
1-8 |
ipv6 import-route limit |
IPv6 IS-IS Commands |
1-9 |
ipv6 local policy-based-route |
IPv6 Unicast Policy Routing Commands |
1-10 |
ipv6 maximum load-balancing |
IPv6 IS-IS Commands |
1-9 |
ipv6 mtu |
IPv6 Basics Commands |
1-24 |
ipv6 nd autoconfig managed-address-flag |
IPv6 Basics Commands |
1-25 |
ipv6 nd autoconfig other-flag |
IPv6 Basics Commands |
1-25 |
ipv6 nd dad attempts |
IPv6 Basics Commands |
1-26 |
ipv6 nd hop-limit |
IPv6 Basics Commands |
1-26 |
ipv6 nd ns retrans-timer |
IPv6 Basics Commands |
1-27 |
ipv6 nd nud reachable-time |
IPv6 Basics Commands |
1-28 |
ipv6 nd ra halt |
IPv6 Basics Commands |
1-28 |
ipv6 nd ra interval |
IPv6 Basics Commands |
1-29 |
ipv6 nd ra no-advlinkmtu |
IPv6 Basics Commands |
1-30 |
ipv6 nd ra prefix |
IPv6 Basics Commands |
1-30 |
ipv6 nd ra router-lifetime |
IPv6 Basics Commands |
1-31 |
ipv6 neighbor |
IPv6 Basics Commands |
1-31 |
ipv6 neighbors max-learning-num |
IPv6 Basics Commands |
1-32 |
ipv6 netstream |
IPv6 NetStream Commands |
1-9 |
ipv6 netstream aggregation |
IPv6 NetStream Commands |
1-9 |
ipv6 netstream export host |
IPv6 NetStream Commands |
1-10 |
ipv6 netstream export rate |
IPv6 NetStream Commands |
1-11 |
ipv6 netstream export source |
IPv6 NetStream Commands |
1-12 |
ipv6 netstream export v9-template refresh-rate packet |
IPv6 NetStream Commands |
1-12 |
ipv6 netstream export v9-template refresh-rate time |
IPv6 NetStream Commands |
1-13 |
ipv6 netstream export version 9 |
IPv6 NetStream Commands |
1-14 |
ipv6 netstream max-entry |
IPv6 NetStream Commands |
1-15 |
ipv6 netstream timeout active |
IPv6 NetStream Commands |
1-15 |
ipv6 netstream timeout inactive |
IPv6 NetStream Commands |
1-16 |
ipv6 pathmtu |
IPv6 Basics Commands |
1-33 |
ipv6 pathmtu age |
IPv6 Basics Commands |
1-33 |
ipv6 policy-based-route (interface view) |
IPv6 Unicast Policy Routing Commands |
1-11 |
ipv6 policy-based-route (system view) |
IPv6 Unicast Policy Routing Commands |
1-11 |
ipv6 preference |
IPv6 IS-IS Commands |
1-10 |
ipv6 route-static |
IPv6 Static Routing Commands |
1-1 |
ipv6 summary |
IPv6 IS-IS Commands |
1-11 |
ipv6-family |
IPv6 BGP Commands |
1-28 |
ipv6-family multicast |
IPv6 MBGP Commands |
1-28 |
isis |
IS-IS Commands |
1-33 |
isis authentication-mode |
IS-IS Commands |
1-34 |
isis bfd enable |
BFD Commands |
1-10 |
isis circuit-level |
IS-IS Commands |
1-35 |
isis circuit-type p2p |
IS-IS Commands |
1-36 |
isis cost |
IS-IS Commands |
1-37 |
isis dis-name |
IS-IS Commands |
1-38 |
isis dis-priority |
IS-IS Commands |
1-39 |
isis enable |
IS-IS Commands |
1-40 |
isis ipv6 enable |
IPv6 IS-IS Commands |
1-12 |
isis mesh-group |
IS-IS Commands |
1-40 |
isis mib-binding |
IS-IS Commands |
1-41 |
isis peer-ip-ignore |
IS-IS Commands |
1-42 |
isis silent |
IS-IS Commands |
1-42 |
isis small-hello |
IS-IS Commands |
1-43 |
isis timer csnp |
IS-IS Commands |
1-44 |
isis timer hello |
IS-IS Commands |
1-45 |
isis timer holding-multiplier |
IS-IS Commands |
1-46 |
isis timer lsp |
IS-IS Commands |
1-47 |
isis timer retransmit |
IS-IS Commands |
1-48 |
is-level |
IS-IS Commands |
1-49 |
is-name |
IS-IS Commands |
1-49 |
is-name map |
IS-IS Commands |
1-50 |
is-snmp-traps enable |
IS-IS Commands |
1-51 |
itf (CE1 interface) |
WAN Interface Commands |
1-25 |
itf (CT1 interface) |
WAN Interface Commands |
1-41 |
|
|
|
jp-pkt-size (IPv6 PIM view) |
IPv6 PIM Commands |
1-27 |
jp-pkt-size (PIM view) |
PIM Commands |
1-31 |
jp-queue-size (IPv6 PIM view) |
IPv6 PIM Commands |
1-27 |
jp-queue-size (PIM view) |
PIM Commands |
1-31 |
|
|
|
keepalive |
GRE Commands |
1-2 |
key (HWTACACS scheme view) |
AAA Commands |
3-6 |
key (RADIUS scheme view) |
AAA Commands |
2-13 |
|
|
|
l2tp enable |
L2TP Commands |
1-4 |
l2tp sendaccm enable |
L2TP Commands |
1-5 |
l2tp-group |
L2TP Commands |
1-6 |
l2tpmoreexam enable |
L2TP Commands |
1-5 |
l2vpn-family |
MPLS L2VPN Commands |
1-23 |
label advertise |
MPLS Basics Commands |
1-43 |
label-distribution |
MPLS Basics Commands |
1-44 |
last-listener-query-interval (MLD view) |
MLD Commands |
1-10 |
last-member-query-interval (IGMP view) |
IGMP Commands |
1-26 |
lcd |
File System Management Commands |
2-18 |
ldap-server |
PKI Commands |
1-15 |
limit |
Connection Limit Commands |
1-3 |
link-protocol |
POS Interface Commands |
1-7 |
link-protocol fr |
Frame Relay Commands |
1-24 |
link-protocol fr mfr |
Frame Relay Commands |
1-25 |
link-protocol hdlc |
HDLC Commands |
1-1 |
link-protocol ppp |
PPP Commands |
1-9 |
list hop |
MPLS TE Commands |
1-49 |
local |
IPsec Commands |
2-18 |
local-address |
IPsec Commands |
2-19 |
locality |
PKI Commands |
1-16 |
local-user |
AAA Commands |
1-30 |
local-user password-display-mode |
AAA Commands |
1-31 |
lock |
User Interface Commands |
1-16 |
logfile save |
Information Center Commands |
1-26 |
log-peer-change |
BGP Commands |
1-37 |
log-peer-change |
OSPF Commands |
1-38 |
log-peer-change |
OSPFv3 Commands |
1-32 |
log-peer-change (IS-IS view) |
IS-IS Commands |
1-51 |
loopback |
CPOS Interface Commands |
1-26 |
loopback |
POS Interface Commands |
1-8 |
loopback |
Ethernet Interface Commands |
1-12 |
loopback |
WAN Interface Commands |
1-10 |
loopback |
ATM Interface Commands |
1-6 |
loopback |
E-CPOS Interface Commands |
1-5 |
loopback (CE1 interface) |
WAN Interface Commands |
1-26 |
loopback (CE3 interface) |
WAN Interface Commands |
1-78 |
loopback (CT1 interface) |
WAN Interface Commands |
1-42 |
loopback (CT3 interface) |
WAN Interface Commands |
1-93 |
loop-detect |
MPLS Basics Commands |
1-44 |
ls |
SSH2.0 Commands |
1-21 |
ls |
File System Management Commands |
2-18 |
lsa-arrival-interval |
OSPF Commands |
1-39 |
lsa-generation-interval |
OSPF Commands |
1-40 |
lsdb-overflow-limit |
OSPF Commands |
1-40 |
lsp-fragments-extend |
IS-IS Commands |
1-52 |
lsp-length originate |
IS-IS Commands |
1-53 |
lsp-length receive |
IS-IS Commands |
1-53 |
lsp-trigger |
MPLS Basics Commands |
1-45 |
lsr-id |
MPLS Basics Commands |
1-46 |
|
|
|
mac-address |
Ethernet Interface Commands |
1-20 |
mandatory-chap |
L2TP Commands |
1-7 |
mandatory-lcp |
L2TP Commands |
1-7 |
map bridge |
ATM Commands |
1-14 |
map ip |
ATM Commands |
1-15 |
map ppp |
ATM Commands |
1-16 |
maximum load-balancing (IS-IS view) |
IS-IS Commands |
1-54 |
maximum load-balancing (OSPF view) |
OSPF Commands |
1-41 |
maximum load-balancing (RIP view) |
RIP Commands |
1-13 |
maximum load-balancing (RIPng view) |
RIPng Commands |
1-9 |
maximum load-balancing(OSPFv3 view) |
OSPFv3 Commands |
1-32 |
maximum-routes |
OSPF Commands |
1-42 |
max-response-time (IGMP view) |
IGMP Commands |
1-26 |
max-response-time (MLD view) |
MLD Commands |
1-11 |
md5-password |
MPLS Basics Commands |
1-47 |
mdl (CT3 interface) |
WAN Interface Commands |
1-93 |
mfr bundle-name |
Frame Relay Commands |
1-26 |
mfr fragment |
Frame Relay Commands |
1-27 |
mfr fragment-size |
Frame Relay Commands |
1-27 |
mfr link-name |
Frame Relay Commands |
1-28 |
mfr retry |
Frame Relay Commands |
1-29 |
mfr timer ack |
Frame Relay Commands |
1-29 |
mfr timer hello |
Frame Relay Commands |
1-30 |
mfr window-size |
Frame Relay Commands |
1-31 |
mib-style |
SNMP Commands |
2-1 |
mirroring-group |
Port Mirroring Commands |
1-2 |
mirroring-group mirroring-port |
Port Mirroring Commands |
1-2 |
mirroring-group monitor-port |
Port Mirroring Commands |
1-3 |
mirroring-port |
Port Mirroring Commands |
1-4 |
mkdir |
SSH2.0 Commands |
1-22 |
mkdir |
File System Management Commands |
1-7 |
mkdir |
File System Management Commands |
2-20 |
mld |
MLD Commands |
1-11 |
mld enable |
MLD Commands |
1-12 |
mld fast-leave |
MLD Commands |
1-13 |
mld group-limit |
MLD Commands |
1-13 |
mld group-policy |
MLD Commands |
1-14 |
mld last-listener-query-interval |
MLD Commands |
1-15 |
mld max-response-time |
MLD Commands |
1-15 |
mld proxying enable |
MLD Commands |
1-17 |
mld proxying forwarding |
MLD Commands |
1-18 |
mld require-router-alert |
MLD Commands |
1-16 |
mld robust-count |
MLD Commands |
1-18 |
mld send-router-alert |
MLD Commands |
1-19 |
mld ssm-mapping enable |
MLD Commands |
1-20 |
mld startup-query-count |
MLD Commands |
1-20 |
mld startup-query-interval |
MLD Commands |
1-21 |
mld static-group |
MLD Commands |
1-22 |
mld timer other-querier-present |
MLD Commands |
1-23 |
mld timer query |
MLD Commands |
1-24 |
mld version |
MLD Commands |
1-24 |
modem |
Modem Management Commands |
1-1 |
modem auto-answer |
Modem Management Commands |
1-2 |
modem timer answer |
Modem Management Commands |
1-2 |
modify hop |
MPLS TE Commands |
1-49 |
monitor-port |
Port Mirroring Commands |
1-5 |
more |
File System Management Commands |
1-8 |
mount |
File System Management Commands |
1-9 |
move |
File System Management Commands |
1-10 |
mpls |
MPLS Basics Commands |
1-48 |
mpls l2vc |
MPLS L2VPN Commands |
1-23 |
mpls l2vpn |
MPLS L2VPN Commands |
1-24 |
mpls l2vpn vpn-name |
MPLS L2VPN Commands |
1-25 |
mpls ldp (interface view) |
MPLS Basics Commands |
1-49 |
mpls ldp (system view) |
MPLS Basics Commands |
1-49 |
mpls ldp remote-peer |
MPLS Basics Commands |
1-50 |
mpls ldp timer hello-hold |
MPLS Basics Commands |
1-51 |
mpls ldp timer keepalive-hold |
MPLS Basics Commands |
1-52 |
mpls ldp transport-address |
MPLS Basics Commands |
1-53 |
mpls lsr-id |
MPLS Basics Commands |
1-54 |
mpls mtu |
MPLS Basics Commands |
1-55 |
mpls rsvp-te |
MPLS TE Commands |
1-50 |
mpls rsvp-te authentication |
MPLS TE Commands |
1-51 |
mpls rsvp-te bfd enable |
BFD Commands |
1-11 |
mpls rsvp-te blockade-multiplier |
MPLS TE Commands |
1-52 |
mpls rsvp-te graceful-restart |
MPLS TE Commands |
1-53 |
mpls rsvp-te hello |
MPLS TE Commands |
1-53 |
mpls rsvp-te hello-lost |
MPLS TE Commands |
1-54 |
mpls rsvp-te keep-multiplier |
MPLS TE Commands |
1-55 |
mpls rsvp-te reliability |
MPLS TE Commands |
1-56 |
mpls rsvp-te resvconfirm |
MPLS TE Commands |
1-56 |
mpls rsvp-te srefresh |
MPLS TE Commands |
1-57 |
mpls rsvp-te timer graceful-restart recovery |
MPLS TE Commands |
1-57 |
mpls rsvp-te timer graceful-restart restart |
MPLS TE Commands |
1-58 |
mpls rsvp-te timer hello |
MPLS TE Commands |
1-59 |
mpls rsvp-te timer refresh |
MPLS TE Commands |
1-59 |
mpls rsvp-te timer retransmission |
MPLS TE Commands |
1-60 |
mpls static-l2vc destination |
MPLS L2VPN Commands |
1-26 |
mpls statistics enable |
MPLS Basics Commands |
1-55 |
mpls te |
MPLS TE Commands |
1-61 |
mpls te affinity property |
MPLS TE Commands |
1-62 |
mpls te auto-bandwidth |
MPLS TE Commands |
1-62 |
mpls te backup |
MPLS TE Commands |
1-63 |
mpls te backup bandwidth |
MPLS TE Commands |
1-64 |
mpls te bandwidth |
MPLS TE Commands |
1-65 |
mpls te bandwidth change thresholds |
MPLS TE Commands |
1-66 |
mpls te commit |
MPLS TE Commands |
1-67 |
mpls te cspf |
MPLS TE Commands |
1-68 |
mpls te cspf timer failed-link |
MPLS TE Commands |
1-68 |
mpls te fast-reroute |
MPLS TE Commands |
1-69 |
mpls te fast-reroute bypass-tunnel |
MPLS TE Commands |
1-70 |
mpls te igp advertise |
MPLS TE Commands |
1-70 |
mpls te igp metric |
MPLS TE Commands |
1-71 |
mpls te igp shortcut |
MPLS TE Commands |
1-72 |
mpls te link administrative group |
MPLS TE Commands |
1-73 |
mpls te loop-detection |
MPLS TE Commands |
1-73 |
mpls te max-link-bandwidth |
MPLS TE Commands |
1-74 |
mpls te max-reservable-bandwidth |
MPLS TE Commands |
1-75 |
mpls te metric |
MPLS TE Commands |
1-75 |
mpls te path |
MPLS TE Commands |
1-76 |
mpls te path metric-type |
MPLS TE Commands |
1-77 |
mpls te priority |
MPLS TE Commands |
1-78 |
mpls te record-route |
MPLS TE Commands |
1-78 |
mpls te reoptimization (tunnel interface view) |
MPLS TE Commands |
1-79 |
mpls te reoptimization (user view) |
MPLS TE Commands |
1-79 |
mpls te resv-style |
MPLS TE Commands |
1-80 |
mpls te retry |
MPLS TE Commands |
1-81 |
mpls te route-pinning |
MPLS TE Commands |
1-81 |
mpls te signal-protocol |
MPLS TE Commands |
1-82 |
mpls te tie-breaking |
MPLS TE Commands |
1-83 |
mpls te timer auto-bandwidth |
MPLS TE Commands |
1-84 |
mpls te timer fast-reroute |
MPLS TE Commands |
1-85 |
mpls te timer retry |
MPLS TE Commands |
1-86 |
mpls te tunnel-id |
MPLS TE Commands |
1-86 |
mpls te vpn-binding |
MPLS TE Commands |
1-87 |
mpls-te |
MPLS TE Commands |
1-88 |
msdp |
MSDP Commands |
1-10 |
mtracert |
Multicast Routing and Forwarding Commands |
1-11 |
mtu |
POS Interface Commands |
1-9 |
mtu |
Ethernet Interface Commands |
1-16 |
mtu |
WAN Interface Commands |
1-10 |
mtu |
PPP Commands |
1-9 |
mtu |
ATM Commands |
1-17 |
mtu (MPLS L2VPN view) |
MPLS L2VPN Commands |
1-27 |
mtu (tunnel interface view) |
Logical Interface Commands |
1-11 |
multicast boundary |
Multicast Routing and Forwarding Commands |
1-12 |
multicast forwarding-table downstream-limit |
Multicast Routing and Forwarding Commands |
1-13 |
multicast forwarding-table route-limit |
Multicast Routing and Forwarding Commands |
1-14 |
multicast ipv6 boundary |
IPv6 Multicast Routing and Forwarding Commands |
1-7 |
multicast ipv6 forwarding-table downstream-limit |
IPv6 Multicast Routing and Forwarding Commands |
1-8 |
multicast ipv6 forwarding-table route-limit |
IPv6 Multicast Routing and Forwarding Commands |
1-9 |
multicast ipv6 load-splitting |
IPv6 Multicast Routing and Forwarding Commands |
1-9 |
multicast ipv6 longest-match |
IPv6 Multicast Routing and Forwarding Commands |
1-10 |
multicast ipv6 routing-enable |
IPv6 Multicast Routing and Forwarding Commands |
1-10 |
multicast load-splitting |
Multicast Routing and Forwarding Commands |
1-15 |
multicast longest-match |
Multicast Routing and Forwarding Commands |
1-15 |
multicast routing-enable |
Multicast Routing and Forwarding Commands |
1-16 |
multicast-domain holddown-time |
Multicast VPN Commands |
1-12 |
multicast-domain log switch-group-reuse |
Multicast VPN Commands |
1-13 |
multicast-domain share-group |
Multicast VPN Commands |
1-14 |
multicast-domain switch-delay |
Multicast VPN Commands |
1-15 |
multicast-domain switch-group-pool |
Multicast VPN Commands |
1-15 |
multiplex mode |
CPOS Interface Commands |
1-27 |
|
|
|
nas-ip (HWTACACS scheme view) |
AAA Commands |
3-7 |
nas-ip (RADIUS scheme view) |
AAA Commands |
2-14 |
nat address-group |
NAT Commands |
1-10 |
nat dns-map |
NAT Commands |
1-11 |
nat outbound |
NAT Commands |
1-12 |
nat outbound static |
NAT Commands |
1-13 |
nat server (for normal nat server) |
NAT Commands |
1-13 |
nat static |
NAT Commands |
1-16 |
nat traversal |
IPsec Commands |
2-19 |
national-bit |
WAN Interface Commands |
1-79 |
natpt address-group |
NAT-PT Commands |
1-5 |
natpt enable |
NAT-PT Commands |
1-5 |
natpt prefix |
NAT-PT Commands |
1-6 |
natpt turn-off tos |
NAT-PT Commands |
1-7 |
natpt turn-off traffic-class |
NAT-PT Commands |
1-7 |
natpt v4bound dynamic |
NAT-PT Commands |
1-8 |
natpt v4bound static |
NAT-PT Commands |
1-9 |
natpt v6bound dynamic |
NAT-PT Commands |
1-10 |
natpt v6bound static |
NAT-PT Commands |
1-11 |
naturemask-arp enable |
ARP Commands |
1-7 |
nbns-list |
DHCP Commands |
1-17 |
nesting-vpn |
MPLS L3VPN Commands |
1-37 |
netbios-type |
DHCP Commands |
1-18 |
network |
DHCP Commands |
1-19 |
network |
RIP Commands |
1-13 |
network (BGP/BGP-VPN instance view) |
BGP Commands |
1-37 |
network (IPv6 address family view) |
IPv6 BGP Commands |
1-28 |
network (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-29 |
network (MBGP family view) |
MBGP Commands |
1-31 |
network (OSPF area view) |
OSPF Commands |
1-42 |
network-entity |
IS-IS Commands |
1-55 |
next hop |
MPLS TE Commands |
1-89 |
next-hop |
NQA Commands |
1-18 |
nqa |
NQA Commands |
1-19 |
nqa agent enable |
NQA Commands |
1-20 |
nqa agent max-concurrent |
NQA Commands |
1-20 |
nqa schedule |
NQA Commands |
1-21 |
nqa server enable |
NQA Commands |
1-39 |
nqa server tcp-connect |
NQA Commands |
1-39 |
nqa server udp-echo |
NQA Commands |
1-40 |
nssa |
OSPF Commands |
1-43 |
ntp-service access |
NTP Commands |
1-5 |
ntp-service authentication enable |
NTP Commands |
1-6 |
ntp-service authentication-keyid |
NTP Commands |
1-6 |
ntp-service broadcast-client |
NTP Commands |
1-7 |
ntp-service broadcast-server |
NTP Commands |
1-8 |
ntp-service in-interface disable |
NTP Commands |
1-9 |
ntp-service max-dynamic-sessions |
NTP Commands |
1-9 |
ntp-service multicast-client |
NTP Commands |
1-10 |
ntp-service multicast-server |
NTP Commands |
1-11 |
ntp-service refclock-master |
NTP Commands |
1-12 |
ntp-service reliable authentication-keyid |
NTP Commands |
1-12 |
ntp-service source-interface |
NTP Commands |
1-13 |
ntp-service unicast-peer |
NTP Commands |
1-14 |
ntp-service unicast-server |
NTP Commands |
1-15 |
|
|
|
oam ais-rdi |
ATM Commands |
1-18 |
oam cc end-to-end |
ATM Commands |
1-19 |
oam frequency |
ATM Commands |
1-20 |
oamping interface |
ATM Commands |
1-21 |
oap connect slot |
OAP Module Commands |
1-1 |
oap reboot |
OAP Module Commands |
1-1 |
oc-12 |
E-CPOS Interface Commands |
1-6 |
oc-3 |
E-CPOS Interface Commands |
1-6 |
opaque-capability |
MPLS TE Commands |
1-89 |
opaque-capability enable |
OSPF Commands |
1-44 |
open |
File System Management Commands |
2-20 |
open ipv6 |
File System Management Commands |
2-21 |
operation (FTP test type view) |
NQA Commands |
1-22 |
operation (HTTP test type view) |
NQA Commands |
1-22 |
operation interface |
NQA Commands |
1-23 |
option |
DHCP Commands |
1-19 |
organization |
PKI Commands |
1-16 |
organization-unit |
PKI Commands |
1-17 |
originating-rp |
MSDP Commands |
1-11 |
ospf |
OSPF Commands |
1-45 |
ospf authentication-mode |
OSPF Commands |
1-45 |
ospf bfd enable |
BFD Commands |
1-10 |
ospf cost |
OSPF Commands |
1-47 |
ospf dr-priority |
OSPF Commands |
1-48 |
ospf mib-binding |
OSPF Commands |
1-48 |
ospf mtu-enable |
OSPF Commands |
1-49 |
ospf network-type |
OSPF Commands |
1-50 |
ospf packet-process prioritized-treatment |
OSPF Commands |
1-51 |
ospf timer dead |
OSPF Commands |
1-52 |
ospf timer hello |
OSPF Commands |
1-53 |
ospf timer poll |
OSPF Commands |
1-53 |
ospf timer retransmit |
OSPF Commands |
1-54 |
ospf trans-delay |
OSPF Commands |
1-55 |
ospfv3 |
OSPFv3 Commands |
1-33 |
ospfv3 area |
OSPFv3 Commands |
1-34 |
ospfv3 cost |
OSPFv3 Commands |
1-34 |
ospfv3 dr-priority |
OSPFv3 Commands |
1-35 |
ospfv3 mtu-ignore |
OSPFv3 Commands |
1-36 |
ospfv3 network-type |
OSPFv3 Commands |
1-36 |
ospfv3 peer |
OSPFv3 Commands |
1-37 |
ospfv3 timer dead |
OSPFv3 Commands |
1-38 |
ospfv3 timer hello |
OSPFv3 Commands |
1-38 |
ospfv3 timer poll |
OSPFv3 Commands |
1-40 |
ospfv3 timer retransmit |
OSPFv3 Commands |
1-39 |
ospfv3 trans-delay |
OSPFv3 Commands |
1-40 |
output-delay |
RIP Commands |
1-14 |
|
|
|
parity |
User Interface Commands |
1-16 |
passive |
File System Management Commands |
2-22 |
password |
AAA Commands |
1-32 |
password (FTP test type view) |
NQA Commands |
1-23 |
patch active |
Hotfix Commands |
1-2 |
patch deactive |
Hotfix Commands |
1-3 |
patch delete |
Hotfix Commands |
1-4 |
patch install |
Hotfix Commands |
1-4 |
patch load |
Hotfix Commands |
1-5 |
patch location |
Hotfix Commands |
1-6 |
patch run |
Hotfix Commands |
1-7 |
path-vectors |
MPLS Basics Commands |
1-56 |
peer |
OSPF Commands |
1-56 |
peer |
RIP Commands |
1-15 |
peer |
IPsec Commands |
2-20 |
peer advertise-community (BGP/BGP-VPN instance view) |
BGP Commands |
1-38 |
peer advertise-community (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-37 |
peer advertise-community (IPv6 address family view) |
IPv6 BGP Commands |
1-29 |
peer advertise-community (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-30 |
peer advertise-community (MBGP family view) |
MBGP Commands |
1-32 |
peer advertise-ext-community (BGP/BGP-VPN instance view) |
BGP Commands |
1-39 |
peer advertise-ext-community (IPv6 address family view) |
IPv6 BGP Commands |
1-30 |
peer advertise-ext-community (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-31 |
peer advertise-ext-community (MBGP family view) |
MBGP Commands |
1-33 |
peer allow-as-loop |
MPLS L3VPN Commands |
1-38 |
peer allow-as-loop (BGP/BGP-VPN instance view) |
BGP Commands |
1-40 |
peer allow-as-loop (IPv6 address family view) |
IPv6 BGP Commands |
1-30 |
peer allow-as-loop (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-31 |
peer allow-as-loop (MBGP family view) |
MBGP Commands |
1-34 |
peer as-number (BGP/BGP-VPN instance view) |
BGP Commands |
1-41 |
peer as-number (IPv6 address family view) |
IPv6 BGP Commands |
1-31 |
peer as-path-acl (BGP/BGP-VPN instance view) |
BGP Commands |
1-42 |
peer as-path-acl (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-39 |
peer as-path-acl (IPv6 address family view) |
IPv6 BGP Commands |
1-32 |
peer as-path-acl (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-32 |
peer as-path-acl (MBGP family view) |
MBGP Commands |
1-34 |
peer capability-advertise conventional |
BGP Commands |
1-43 |
peer capability-advertise route-refresh |
BGP Commands |
1-43 |
peer capability-advertise route-refresh |
IPv6 BGP Commands |
1-33 |
peer connect-interface |
MSDP Commands |
1-11 |
peer connect-interface (BGP/BGP-VPN instance view) |
BGP Commands |
1-44 |
peer connect-interface (IPv6 address family view) |
IPv6 BGP Commands |
1-33 |
peer default-route-advertise |
IPv6 BGP Commands |
1-34 |
peer default-route-advertise (BGP/BGP-VPN instance view) |
BGP Commands |
1-45 |
peer default-route-advertise (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-33 |
peer default-route-advertise (MBGP family view) |
MBGP Commands |
1-35 |
peer default-route-advertise vpn-instance |
MPLS L3VPN Commands |
1-40 |
peer description |
MSDP Commands |
1-12 |
peer description (BGP/BGP-VPN instance view) |
BGP Commands |
1-46 |
peer description (IPv6 address family view) |
IPv6 BGP Commands |
1-35 |
peer ebgp-max-hop (BGP/BGP-VPN instance view) |
BGP Commands |
1-47 |
peer ebgp-max-hop (IPv6 address family view) |
IPv6 BGP Commands |
1-35 |
peer enable |
MPLS L3VPN Commands |
1-40 |
peer enable (BGP/BGP-VPN instance view) |
BGP Commands |
1-47 |
peer enable (BGP-MDT sub-address family view) |
Multicast VPN Commands |
1-16 |
peer enable (IPv6 address family view) |
IPv6 BGP Commands |
1-36 |
peer enable (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-34 |
peer enable (MBGP family view) |
MBGP Commands |
1-36 |
peer fake-as (BGP/BGP-VPN instance view) |
BGP Commands |
1-48 |
peer fake-as (IPv6 address family view) |
IPv6 BGP Commands |
1-37 |
peer filter-policy (BGP/BGP-VPN instance view) |
BGP Commands |
1-49 |
peer filter-policy (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-41 |
peer filter-policy (IPv6 address family view) |
IPv6 BGP Commands |
1-38 |
peer filter-policy (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-35 |
peer filter-policy (MBGP family view) |
MBGP Commands |
1-37 |
peer group |
MPLS L3VPN Commands |
1-42 |
peer group (BGP/BGP-VPN instance view) |
BGP Commands |
1-50 |
peer group (BGP-MDT sub-address family view) |
Multicast VPN Commands |
1-17 |
peer group (IPv6 address family view) |
IPv6 BGP Commands |
1-38 |
peer group (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-35 |
peer group (MBGP family view) |
MBGP Commands |
1-37 |
peer ignore (BGP/BGP-VPN instance view) |
BGP Commands |
1-51 |
peer ignore (IPv6 address family view) |
IPv6 BGP Commands |
1-39 |
peer ip-address bfd |
BFD Commands |
1-12 |
peer ip-prefix |
BGP Commands |
1-52 |
peer ip-prefix (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-43 |
peer ip-prefix (MBGP family view) |
MBGP Commands |
1-38 |
peer ipv6-prefix |
IPv6 BGP Commands |
1-40 |
peer ipv6-prefix (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-36 |
peer keep-all-routes (BGP/BGP-VPN instance view) |
BGP Commands |
1-52 |
peer keep-all-routes (IPv6 address family view) |
IPv6 BGP Commands |
1-41 |
peer keep-all-routes (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-37 |
peer keep-all-routes (MBGP family view) |
MBGP Commands |
1-39 |
peer label-route-capability (BGP view, BGP VPN instance view) |
MPLS L3VPN Commands |
1-43 |
peer label-route-capability (IPv6 address family view) |
IPv6 BGP Commands |
1-41 |
peer log-change (BGP/BGP-VPN instance view) |
BGP Commands |
1-53 |
peer log-change (IPv6 address family view) |
IPv6 BGP Commands |
1-42 |
peer mesh-group |
MSDP Commands |
1-13 |
peer minimum-ttl |
MSDP Commands |
1-13 |
peer next-hop-invariable (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-44 |
peer next-hop-local |
MPLS L3VPN Commands |
1-45 |
peer next-hop-local (BGP/BGP-VPN instance view) |
BGP Commands |
1-54 |
peer next-hop-local (IPv6 address family view) |
IPv6 BGP Commands |
1-43 |
peer next-hop-local (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-38 |
peer next-hop-local (MBGP family view) |
MBGP Commands |
1-40 |
peer password |
BGP Commands |
1-55 |
peer preferred-value (BGP/BGP-VPN instance view) |
BGP Commands |
1-56 |
peer preferred-value (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-46 |
peer preferred-value (IPv6 address family view) |
IPv6 BGP Commands |
1-43 |
peer preferred-value (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-39 |
peer preferred-value (MBGP family view) |
MBGP Commands |
1-40 |
peer public-as-only (BGP/BGP-VPN instance view) |
BGP Commands |
1-57 |
peer public-as-only (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-46 |
peer public-as-only (IPv6 address family view) |
IPv6 BGP Commands |
1-44 |
peer public-as-only (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-40 |
peer public-as-only (MBGP family view) |
MBGP Commands |
1-41 |
peer reflect-client |
MPLS L3VPN Commands |
1-47 |
peer reflect-client (BGP/BGP-VPN instance view) |
BGP Commands |
1-58 |
peer reflect-client (BGP-MDT sub-address family view) |
Multicast VPN Commands |
1-18 |
peer reflect-client (IPv6 address family view) |
IPv6 BGP Commands |
1-45 |
peer reflect-client (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-40 |
peer reflect-client (MBGP family view) |
MBGP Commands |
1-42 |
peer request-sa-enable |
MSDP Commands |
1-14 |
peer route-limit (BGP/BGP-VPN instance view) |
BGP Commands |
1-58 |
peer route-limit (IPv6 address family view) |
IPv6 BGP Commands |
1-46 |
peer route-limit (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-41 |
peer route-limit (MBGP family view) |
MBGP Commands |
1-43 |
peer route-policy (BGP/BGP-VPN instance view) |
BGP Commands |
1-59 |
peer route-policy (BGP-VPNv4 subaddress family view) |
MPLS L3VPN Commands |
1-48 |
peer route-policy (IPv6 address family view) |
IPv6 BGP Commands |
1-47 |
peer route-policy (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-42 |
peer route-policy (MBGP family view) |
MBGP Commands |
1-44 |
peer route-update-interval (BGP/BGP-VPN instance view) |
BGP Commands |
1-60 |
peer route-update-interval (IPv6 address family view) |
IPv6 BGP Commands |
1-47 |
peer sa-cache-maximum |
MSDP Commands |
1-15 |
peer sa-policy |
MSDP Commands |
1-15 |
peer sa-request-policy |
MSDP Commands |
1-16 |
peer substitute-as (BGP/BGP-VPN instance view) |
BGP Commands |
1-61 |
peer substitute-as (IPv6 address family view) |
IPv6 BGP Commands |
1-48 |
peer timer (BGP/BGP-VPN instance view) |
BGP Commands |
1-62 |
peer timer (IPv6 address family view) |
IPv6 BGP Commands |
1-49 |
peer upe |
MPLS L3VPN Commands |
1-48 |
peer upe route-policy |
MPLS L3VPN Commands |
1-49 |
peer vpn-instance enable |
MPLS L3VPN Commands |
1-50 |
peer vpn-instance group |
MPLS L3VPN Commands |
1-51 |
peer vpn-instance route-policy import |
MPLS L3VPN Commands |
1-52 |
peer-public-key end |
Public Key Commands |
1-3 |
pfs |
IPsec Commands |
1-22 |
phy-mru |
WAN Interface Commands |
1-11 |
pim |
PIM Commands |
1-32 |
pim bsr-boundary |
PIM Commands |
1-33 |
pim dm |
PIM Commands |
1-34 |
pim hello-option dr-priority |
PIM Commands |
1-34 |
pim hello-option holdtime |
PIM Commands |
1-35 |
pim hello-option lan-delay |
PIM Commands |
1-36 |
pim hello-option neighbor-tracking |
PIM Commands |
1-36 |
pim hello-option override-interval |
PIM Commands |
1-37 |
pim holdtime assert |
PIM Commands |
1-38 |
pim holdtime join-prune |
PIM Commands |
1-38 |
pim ipv6 |
IPv6 PIM Commands |
1-28 |
pim ipv6 bsr-boundary |
IPv6 PIM Commands |
1-29 |
pim ipv6 dm |
IPv6 PIM Commands |
1-29 |
pim ipv6 hello-option dr-priority |
IPv6 PIM Commands |
1-30 |
pim ipv6 hello-option holdtime |
IPv6 PIM Commands |
1-31 |
pim ipv6 hello-option lan-delay |
IPv6 PIM Commands |
1-31 |
pim ipv6 hello-option neighbor-tracking |
IPv6 PIM Commands |
1-32 |
pim ipv6 hello-option override-interval |
IPv6 PIM Commands |
1-33 |
pim ipv6 holdtime assert |
IPv6 PIM Commands |
1-33 |
pim ipv6 holdtime join-prune |
IPv6 PIM Commands |
1-34 |
pim ipv6 neighbor-policy |
IPv6 PIM Commands |
1-34 |
pim ipv6 require-genid |
IPv6 PIM Commands |
1-35 |
pim ipv6 sm |
IPv6 PIM Commands |
1-36 |
pim ipv6 state-refresh-capable |
IPv6 PIM Commands |
1-36 |
pim ipv6 timer graft-retry |
IPv6 PIM Commands |
1-37 |
pim ipv6 timer hello |
IPv6 PIM Commands |
1-38 |
pim ipv6 timer join-prune |
IPv6 PIM Commands |
1-38 |
pim ipv6 triggered-hello-delay |
IPv6 PIM Commands |
1-39 |
pim neighbor-policy |
PIM Commands |
1-39 |
pim require-genid |
PIM Commands |
1-40 |
pim sm |
PIM Commands |
1-40 |
pim state-refresh-capable |
PIM Commands |
1-41 |
pim timer graft-retry |
PIM Commands |
1-41 |
pim timer hello |
PIM Commands |
1-42 |
pim timer join-prune |
PIM Commands |
1-43 |
pim triggered-hello-delay |
PIM Commands |
1-43 |
ping |
System Maintenance and Debugging Commands |
1-1 |
ping ipv6 |
System Maintenance and Debugging Commands |
1-5 |
ping lsp |
MPLS Basics Commands |
1-57 |
pki certificate access-control-policy |
PKI Commands |
1-17 |
pki certificate attribute-group |
PKI Commands |
1-18 |
pki delete-certificate |
PKI Commands |
1-19 |
pki domain |
PKI Commands |
1-19 |
pki entity |
PKI Commands |
1-20 |
pki import-certificate |
PKI Commands |
1-21 |
pki request-certificate domain |
PKI Commands |
1-21 |
pki retrieval-certificate |
PKI Commands |
1-22 |
pki retrieval-crl domain |
PKI Commands |
1-23 |
pki validate-certificate |
PKI Commands |
1-23 |
policy vpn-target |
MPLS L3VPN Commands |
1-53 |
policy-based-route |
IP Unicast Policy Routing Commands |
1-11 |
portal auth-network |
Portal Commands |
1-14 |
portal delete-user |
Portal Commands |
1-14 |
portal domain |
Portal Commands |
1-15 |
portal free-rule |
Portal Commands |
1-16 |
portal server |
Portal Commands |
1-17 |
portal server method |
Portal Commands |
1-18 |
portal server server-detect |
Portal Commands |
1-18 |
portal server user-sync |
Portal Commands |
1-20 |
port-mapping |
Firewall Commands |
1-13 |
port-mode |
Ethernet Interface Commands |
1-13 |
power-supply policy priority |
Device Management Commands |
1-30 |
ppp account-statistics enable |
PPP Commands |
1-10 |
ppp authentication-mode |
PPP Commands |
1-10 |
ppp chap password |
PPP Commands |
1-12 |
ppp chap user |
PPP Commands |
1-12 |
ppp ipcp dns |
PPP Commands |
1-13 |
ppp ipcp dns admit-any |
PPP Commands |
1-14 |
ppp ipcp dns request |
PPP Commands |
1-15 |
ppp ipcp remote-address forced |
PPP Commands |
1-15 |
ppp mp |
PPP Commands |
1-16 |
ppp mp binding-mode |
PPP Commands |
1-17 |
ppp mp endpoint |
PPP Commands |
1-18 |
ppp mp lfi |
PPP Commands |
1-28 |
ppp mp lfi delay-per-frag |
PPP Commands |
1-28 |
ppp mp max-bind |
PPP Commands |
1-18 |
ppp mp min-fragment |
PPP Commands |
1-19 |
ppp mp mp-group |
PPP Commands |
1-20 |
ppp mp short-sequence |
PPP Commands |
1-21 |
ppp mp soft-binding |
CPOS Interface Commands |
1-28 |
ppp mp user |
PPP Commands |
1-22 |
ppp mp virtual-template |
PPP Commands |
1-23 |
ppp pap local-user |
PPP Commands |
1-24 |
ppp timer negotiate |
PPP Commands |
1-24 |
pppoe-server bind |
PPP Commands |
2-2 |
pppoe-server log-information off |
PPP Commands |
2-2 |
pppoe-server max-sessions local-mac |
PPP Commands |
2-3 |
pppoe-server max-sessions remote-mac |
PPP Commands |
2-3 |
pppoe-server max-sessions total |
PPP Commands |
2-4 |
preference |
OSPF Commands |
1-57 |
preference |
RIP Commands |
1-16 |
preference |
OSPFv3 Commands |
1-41 |
preference |
RIPng Commands |
1-10 |
preference (BGP/BGP-VPN instance view) |
BGP Commands |
1-63 |
preference (IPv6 address family view) |
IPv6 BGP Commands |
1-50 |
preference (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-43 |
preference (IS-IS view) |
IS-IS Commands |
1-55 |
preference (MBGP family view) |
MBGP Commands |
1-45 |
prefix-label advertise |
MPLS Basics Commands |
1-58 |
pre-shared-key |
IPsec Commands |
2-20 |
primary accounting (HWTACACS scheme view) |
AAA Commands |
3-7 |
primary accounting (RADIUS scheme view) |
AAA Commands |
2-15 |
primary authentication (HWTACACS scheme view) |
AAA Commands |
3-8 |
primary authentication (RADIUS scheme view) |
AAA Commands |
2-16 |
primary authorization |
AAA Commands |
3-9 |
probe count |
NQA Commands |
1-24 |
probe packet-interval |
NQA Commands |
1-25 |
probe packet-number |
NQA Commands |
1-25 |
probe packet-timeout |
NQA Commands |
1-26 |
probe timeout |
NQA Commands |
1-27 |
probe-interval (IPv6 PIM view) |
IPv6 PIM Commands |
1-39 |
probe-interval (PIM view) |
PIM Commands |
1-44 |
proposal |
IPsec Commands |
1-23 |
protocol |
QoS Commands |
6-4 |
protocol inbound |
User Interface Commands |
1-17 |
proxy-arp enable |
ARP Commands |
2-1 |
public-key local create |
Public Key Commands |
1-6 |
public-key local destroy |
Public Key Commands |
1-7 |
public-key local export dsa |
Public Key Commands |
1-8 |
public-key local export rsa |
Public Key Commands |
1-9 |
public-key peer |
Public Key Commands |
1-10 |
public-key peer import sshkey |
Public Key Commands |
1-10 |
public-key-code begin |
Public Key Commands |
1-4 |
public-key-code end |
Public Key Commands |
1-5 |
put |
SSH2.0 Commands |
1-22 |
put |
File System Management Commands |
2-22 |
pvc |
ATM Commands |
1-22 |
pvc max-number |
ATM Commands |
1-24 |
pvc-group |
ATM Commands |
1-23 |
pvp limit |
ATM Commands |
1-25 |
pwd |
SSH2.0 Commands |
1-23 |
pwd |
File System Management Commands |
1-11 |
pwd |
File System Management Commands |
2-23 |
|
|
|
qos apply policy (interface/PVC view) |
QoS Commands |
1-19 |
qos apply policy (user-profile view) |
QoS Commands |
1-20 |
qos car |
QoS Commands |
2-3 |
qos carl |
QoS Commands |
2-4 |
qos cq |
QoS Commands |
3-9 |
qos cql default-queue |
QoS Commands |
3-10 |
qos cql protocol |
QoS Commands |
3-10 |
qos cql protocol mpls exp |
QoS Commands |
5-1 |
qos cql queue |
QoS Commands |
3-12 |
qos cql queue serving |
QoS Commands |
3-12 |
qos fifo queue-length |
QoS Commands |
3-1 |
qos gts |
QoS Commands |
2-8 |
qos lr |
QoS Commands |
2-10 |
qos max-bandwidth |
QoS Commands |
3-16 |
qos policy |
QoS Commands |
1-21 |
qos pq |
QoS Commands |
3-3 |
qos pql default-queue |
QoS Commands |
3-4 |
qos pql protocol |
QoS Commands |
3-5 |
qos pql protocol mpls exp |
QoS Commands |
5-2 |
qos pql queue |
QoS Commands |
3-6 |
qos qmtoken |
QoS Commands |
3-28 |
qos reserved-bandwidth |
QoS Commands |
3-26 |
qos rtpq |
QoS Commands |
3-26 |
qos wfq |
QoS Commands |
3-14 |
qos wred dscp |
QoS Commands |
4-3 |
qos wred enable |
QoS Commands |
4-2 |
qos wred ip-precedence |
QoS Commands |
4-4 |
qos wred weighting-constant |
QoS Commands |
4-4 |
queue af |
QoS Commands |
3-18 |
queue ef |
QoS Commands |
3-18 |
queue wfq |
QoS Commands |
3-19 |
queue-length |
QoS Commands |
3-20 |
quit |
SSH2.0 Commands |
1-23 |
quit |
File System Management Commands |
2-24 |
quit |
Basic System Configuration Commands |
1-19 |
|
|
|
radius client |
AAA Commands |
2-17 |
radius nas-ip |
AAA Commands |
2-18 |
radius scheme |
AAA Commands |
2-19 |
radius trap |
AAA Commands |
2-19 |
reaction |
NQA Commands |
1-27 |
reaction trap |
NQA Commands |
1-28 |
reboot |
Device Management Commands |
1-30 |
redirect disconnect |
User Interface Commands |
1-18 |
redirect enable |
User Interface Commands |
1-19 |
redirect listen-port |
User Interface Commands |
1-20 |
redirect refuse-negotiation |
User Interface Commands |
1-21 |
redirect refuse-teltransfer |
User Interface Commands |
1-21 |
redirect return-deal from-telnet |
User Interface Commands |
1-22 |
redirect return-deal from-terminal |
User Interface Commands |
1-23 |
redirect timeout |
User Interface Commands |
1-24 |
reflect between-clients |
MPLS L3VPN Commands |
1-54 |
reflect between-clients (BGP view) |
BGP Commands |
1-64 |
reflect between-clients (BGP-MDT sub-address family view) |
Multicast VPN Commands |
1-19 |
reflect between-clients (IPv6 address family view) |
IPv6 BGP Commands |
1-51 |
reflect between-clients (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-44 |
reflect between-clients (MBGP family view) |
MBGP Commands |
1-45 |
reflector cluster-id |
MPLS L3VPN Commands |
1-54 |
reflector cluster-id (BGP view) |
BGP Commands |
1-65 |
reflector cluster-id (BGP-MDT sub-address family view) |
Multicast VPN Commands |
1-19 |
reflector cluster-id (IPv6 address family view) |
IPv6 BGP Commands |
1-51 |
reflector cluster-id (IPv6 MBGP address family view) |
IPv6 MBGP Commands |
1-45 |
reflector cluster-id (MBGP family view) |
MBGP Commands |
1-46 |
refresh bgp |
BGP Commands |
1-66 |
refresh bgp ipv4 multicast |
MBGP Commands |
1-47 |
refresh bgp ipv6 |
IPv6 BGP Commands |
1-52 |
refresh bgp ipv6 multicast |
IPv6 MBGP Commands |
1-45 |
refresh bgp vpn-instance |
MPLS L3VPN Commands |
1-55 |
refresh bgp vpnv4 |
MPLS L3VPN Commands |
1-56 |
register-policy (IPv6 PIM view) |
IPv6 PIM Commands |
1-40 |
register-policy (PIM view) |
PIM Commands |
1-44 |
register-suppression-timeout (IPv6 PIM view) |
IPv6 PIM Commands |
1-41 |
register-suppression-timeout (PIM view) |
PIM Commands |
1-45 |
register-whole-checksum (IPv6 PIM view) |
IPv6 PIM Commands |
1-41 |
register-whole-checksum (PIM view) |
PIM Commands |
1-46 |
remark dscp |
QoS Commands |
1-11 |
remark ip-precedence |
QoS Commands |
1-12 |
remark mpls-exp |
QoS Commands |
1-13 |
remark mpls-exp |
QoS Commands |
5-3 |
remark qos-local-id |
QoS Commands |
1-14 |
remote address |
PPP Commands |
1-25 |
remote-address |
IPsec Commands |
2-21 |
remotehelp |
File System Management Commands |
2-24 |
remote-ip |
MPLS Basics Commands |
1-59 |
remote-name |
IPsec Commands |
2-22 |
remove |
SSH2.0 Commands |
1-24 |
remove |
Device Management Commands |
1-32 |
rename |
SSH2.0 Commands |
1-24 |
rename |
File System Management Commands |
1-11 |
require-router-alert (IGMP view) |
IGMP Commands |
1-27 |
require-router-alert (MLD view) |
MLD Commands |
1-25 |
reset acl counter |
ACL Commands |
1-9 |
reset acl ipv6 counter |
ACL Commands |
1-22 |
reset arp |
ARP Commands |
1-8 |
reset atm interface |
ATM Interface Commands |
1-2 |
reset bfd session statistics |
BFD Commands |
1-12 |
reset bgp |
BGP Commands |
1-66 |
reset bgp dampening |
BGP Commands |
1-67 |
reset bgp flap-info |
BGP Commands |
1-67 |
reset bgp ipv4 all |
BGP Commands |
1-68 |
reset bgp ipv4 multicast |
MBGP Commands |
1-48 |
reset bgp ipv4 multicast dampening |
MBGP Commands |
1-48 |
reset bgp ipv4 multicast flap-info |
MBGP Commands |
1-49 |
reset bgp ipv6 |
IPv6 BGP Commands |
1-53 |
reset bgp ipv6 dampening |
IPv6 BGP Commands |
1-54 |
reset bgp ipv6 flap-info |
IPv6 BGP Commands |
1-54 |
reset bgp ipv6 multicast |
IPv6 MBGP Commands |
1-46 |
reset bgp ipv6 multicast dampening |
IPv6 MBGP Commands |
1-47 |
reset bgp ipv6 multicast flap-info |
IPv6 MBGP Commands |
1-47 |
reset bgp l2vpn |
MPLS L2VPN Commands |
1-27 |
reset bgp mdt |
Multicast VPN Commands |
1-20 |
reset bgp vpn-instance |
MPLS L3VPN Commands |
1-57 |
reset bgp vpn-instance dampening |
MPLS L3VPN Commands |
1-57 |
reset bgp vpn-instance flap-info |
MPLS L3VPN Commands |
1-58 |
reset bgp vpnv4 |
MPLS L3VPN Commands |
1-58 |
reset counters controller cpos |
CPOS Interface Commands |
1-28 |
reset counters controller e1 |
WAN Interface Commands |
1-27 |
reset counters controller e3 |
WAN Interface Commands |
1-79 |
reset counters controller t1 |
WAN Interface Commands |
1-42 |
reset counters controller t3 |
WAN Interface Commands |
1-95 |
reset counters interface |
POS Interface Commands |
1-10 |
reset counters interface |
Ethernet Interface Commands |
1-13 |
reset counters interface |
Frame Relay Commands |
1-32 |
reset counters interface |
PPP Commands |
1-26 |
reset counters interface |
Logical Interface Commands |
1-12 |
reset counters interface |
ATM Interface Commands |
1-3 |
reset dar protocol-statistic |
QoS Commands |
6-5 |
reset dhcp relay statistics |
DHCP Commands |
2-19 |
reset dhcp server conflict |
DHCP Commands |
1-20 |
reset dhcp server ip-in-use |
DHCP Commands |
1-21 |
reset dhcp server statistics |
DHCP Commands |
1-21 |
reset dns dynamic-host |
DNS Commands |
1-8 |
reset dns ipv6 dynamic-host |
IPv6 Basics Commands |
1-34 |
reset firewall http |
WEB Filtering Commands |
1-17 |
reset firewall ipv6 statistics |
Firewall Commands |
1-6 |
reset firewall-statistics |
Firewall Commands |
1-7 |
reset fr inarp |
Frame Relay Commands |
1-33 |
reset hwtacacs statistics |
AAA Commands |
3-10 |
reset igmp group |
IGMP Commands |
1-28 |
reset igmp ssm-mapping group |
IGMP Commands |
1-29 |
reset ike sa |
IPsec Commands |
2-22 |
reset ip ip-prefix |
Route Policy Commands |
1-27 |
reset ip ipv6-prefix |
Route Policy Commands |
1-31 |
reset ip netstream statistics |
NetStream Commands |
1-17 |
reset ip routing-table statistics protocol |
IP Routing Table Display Commands |
1-22 |
reset ip statistics |
IP Performance Optimization Commands |
1-17 |
reset ipsec sa |
IPsec Commands |
1-24 |
reset ipsec statistics |
IPsec Commands |
1-25 |
reset ipv6 dhcp relay statistics |
DHCPv6 Commands |
1-5 |
reset ipv6 fibcache |
IPv6 Basics Commands |
1-34 |
reset ipv6 neighbors |
IPv6 Basics Commands |
1-35 |
reset ipv6 netstream statistics |
IPv6 NetStream Commands |
1-17 |
reset ipv6 pathmtu |
IPv6 Basics Commands |
1-35 |
reset ipv6 policy-based-route statistics |
IPv6 Unicast Policy Routing Commands |
1-13 |
reset ipv6 routing-table statistics |
IP Routing Table Display Commands |
1-22 |
reset isis all |
IS-IS Commands |
1-56 |
reset isis peer |
IS-IS Commands |
1-57 |
reset l2tp tunnel |
L2TP Commands |
1-8 |
reset logbuffer |
Information Center Commands |
1-26 |
reset mld group |
MLD Commands |
1-26 |
reset mld ssm-mapping group |
MLD Commands |
1-26 |
reset mpls ldp |
MPLS Basics Commands |
1-59 |
reset mpls rsvp-te statistics |
MPLS TE Commands |
1-90 |
reset mpls statistics interface |
MPLS Basics Commands |
1-60 |
reset mpls statistics lsp |
MPLS Basics Commands |
1-61 |
reset mpls statistics lsp in-label |
MPLS Basics Commands |
1-61 |
reset mpls statistics tunnel |
MPLS Basics Commands |
1-62 |
reset mpls te auto-bandwidth adjustment timers |
MPLS TE Commands |
1-90 |
reset msdp peer |
MSDP Commands |
1-17 |
reset msdp sa-cache |
MSDP Commands |
1-18 |
reset msdp statistics |
MSDP Commands |
1-18 |
reset multicast forwarding-table |
Multicast Routing and Forwarding Commands |
1-17 |
reset multicast ipv6 forwarding-table |
IPv6 Multicast Routing and Forwarding Commands |
1-11 |
reset multicast ipv6 routing-table |
IPv6 Multicast Routing and Forwarding Commands |
1-12 |
reset multicast routing-table |
Multicast Routing and Forwarding Commands |
1-18 |
reset natpt statistics |
NAT-PT Commands |
1-11 |
reset ospf counters |
OSPF Commands |
1-57 |
reset ospf process |
OSPF Commands |
1-58 |
reset ospf redistribution |
OSPF Commands |
1-59 |
reset pim control-message counters |
PIM Commands |
1-46 |
reset pim ipv6 control-message counters |
IPv6 PIM Commands |
1-42 |
reset policy-based-route statistics |
IP Unicast Policy Routing Commands |
1-12 |
reset portal connection statistics |
Portal Commands |
1-22 |
reset portal server statistics |
Portal Commands |
1-22 |
reset portal tcp-cheat statistics |
Portal Commands |
1-23 |
reset pppoe-server |
PPP Commands |
2-5 |
reset radius statistics |
AAA Commands |
2-20 |
reset recycle-bin |
File System Management Commands |
1-12 |
reset rip process |
RIP Commands |
1-16 |
reset rip statistics |
RIP Commands |
1-17 |
reset ripng process |
RIPng Commands |
1-11 |
reset ripng statistics |
RIPng Commands |
1-11 |
reset sampler statistics |
Sampler Commands |
1-2 |
reset saved-configuration |
File System Management Commands |
1-18 |
reset session |
Session Management Commands |
1-6 |
reset session statistics |
Session Management Commands |
1-7 |
reset stop-accounting-buffer |
AAA Commands |
2-21 |
reset stop-accounting-buffer |
AAA Commands |
3-11 |
reset tcp ipv6 statistics |
IPv6 Basics Commands |
1-36 |
reset tcp statistics |
IP Performance Optimization Commands |
1-18 |
reset trapbuffer |
Information Center Commands |
1-27 |
reset udp ipv6 statistics |
IPv6 Basics Commands |
1-36 |
reset udp statistics |
IP Performance Optimization Commands |
1-18 |
reset udp-helper packet |
UDP Helper Commands |
1-1 |
reset unused porttag |
Device Management Commands |
1-33 |
reset userlog flow export |
Flow Log Commands |
1-2 |
reset userlog flow logbuffer |
Flow Log Commands |
1-3 |
reset vrrp ipv6 statistics |
VRRP Commands |
1-18 |
reset vrrp statistics |
VRRP Commands |
1-5 |
resolve-target |
NQA Commands |
1-29 |
restore startup-configuration |
File System Management Commands |
1-19 |
retry |
AAA Commands |
2-22 |
retry realtime-accounting |
AAA Commands |
2-23 |
retry stop-accounting (HWTACACS scheme view) |
AAA Commands |
3-11 |
retry stop-accounting (RADIUS scheme view) |
AAA Commands |
2-24 |
return |
Basic System Configuration Commands |
1-19 |
reverse-rts |
WAN Interface Commands |
1-11 |
rfc1583 compatible |
OSPF Commands |
1-59 |
rip |
RIP Commands |
1-17 |
rip authentication-mode |
RIP Commands |
1-18 |
rip bfd enable |
BFD Commands |
1-13 |
rip default-route |
RIP Commands |
1-19 |
rip input |
RIP Commands |
1-20 |
rip metricin |
RIP Commands |
1-20 |
rip metricout |
RIP Commands |
1-21 |
rip mib-binding |
RIP Commands |
1-22 |
rip output |
RIP Commands |
1-23 |
rip poison-reverse |
RIP Commands |
1-24 |
rip split-horizon |
RIP Commands |
1-24 |
rip summary-address |
RIP Commands |
1-25 |
rip version |
RIP Commands |
1-26 |
ripng |
RIPng Commands |
1-12 |
ripng default-route |
RIPng Commands |
1-12 |
ripng enable |
RIPng Commands |
1-13 |
ripng metricin |
RIPng Commands |
1-14 |
ripng metricout |
RIPng Commands |
1-14 |
ripng poison-reverse |
RIPng Commands |
1-15 |
ripng split-horizon |
RIPng Commands |
1-15 |
ripng summary-address |
RIPng Commands |
1-16 |
rmdir |
SSH2.0 Commands |
1-25 |
rmdir |
File System Management Commands |
1-13 |
rmdir |
File System Management Commands |
2-26 |
rmon alarm |
RMON Commands |
1-10 |
rmon event |
RMON Commands |
1-12 |
rmon history |
RMON Commands |
1-13 |
rmon prialarm |
RMON Commands |
1-14 |
rmon statistics |
RMON Commands |
1-16 |
robust-count (IGMP view) |
IGMP Commands |
1-30 |
robust-count (MLD view) |
MLD Commands |
1-27 |
root-certificate fingerprint |
PKI Commands |
1-24 |
route-distinguisher (MPLS L2VPN view) |
MPLS L2VPN Commands |
1-28 |
route-distinguisher (VPN instance view) |
MPLS L3VPN Commands |
1-59 |
route-option bypass-route |
NQA Commands |
1-30 |
route-policy |
Route Policy Commands |
1-21 |
router id |
IP Routing Table Display Commands |
1-23 |
router-id |
BGP Commands |
1-69 |
router-id |
IPv6 BGP Commands |
1-55 |
router-id |
OSPFv3 Commands |
1-42 |
route-tag |
MPLS L3VPN Commands |
1-60 |
routing-table limit |
MPLS L3VPN Commands |
1-61 |
rr-filter |
MPLS L3VPN Commands |
1-62 |
rsh |
RSH Commands |
1-1 |
rule (advanced IPv4 ACL view) |
ACL Commands |
1-11 |
rule (advanced IPv6 ACL view) |
ACL Commands |
1-24 |
rule (basic IPv4 ACL view) |
ACL Commands |
1-10 |
rule (basic IPv6 ACL view) |
ACL Commands |
1-22 |
rule (Ethernet frame header ACL view) |
ACL Commands |
1-15 |
rule (PKI CERT ACP view) |
PKI Commands |
1-25 |
rule comment (for IPv4) |
ACL Commands |
1-16 |
rule comment (for IPv6) |
ACL Commands |
1-26 |
|
|
|
sa authentication-hex |
IPsec Commands |
1-25 |
sa duration |
IPsec Commands |
1-26 |
sa duration |
IPsec Commands |
2-23 |
sa encryption-hex |
IPsec Commands |
1-27 |
sa spi |
IPsec Commands |
1-28 |
sa string-key |
IPsec Commands |
1-29 |
sampler |
Sampler Commands |
1-2 |
save |
File System Management Commands |
1-20 |
schedule job |
Device Management Commands |
1-33 |
schedule reboot at |
Device Management Commands |
1-35 |
schedule reboot delay |
Device Management Commands |
1-36 |
scramble |
POS Interface Commands |
1-10 |
scramble |
ATM Interface Commands |
1-6 |
screen-length |
User Interface Commands |
1-25 |
screen-length disable |
Basic System Configuration Commands |
1-20 |
secondary accounting (HWTACACS scheme view) |
AAA Commands |
3-12 |
secondary accounting (RADIUS scheme view) |
AAA Commands |
2-24 |
secondary authentication (HWTACACS scheme view) |
AAA Commands |
3-13 |
secondary authentication (RADIUS scheme view) |
AAA Commands |
2-26 |
secondary authorization |
AAA Commands |
3-14 |
security acl |
IPsec Commands |
1-30 |
security-policy-server |
AAA Commands |
2-27 |
self-service-url enable |
AAA Commands |
1-32 |
send |
User Interface Commands |
1-26 |
sendat |
Modem Management Commands |
1-3 |
sendloopcode |
WAN Interface Commands |
1-43 |
send-router-alert (IGMP view) |
IGMP Commands |
1-30 |
send-router-alert (MLD view) |
MLD Commands |
1-28 |
server-type |
AAA Commands |
2-28 |
service cbr |
ATM Commands |
1-26 |
service modem-callback |
Modem Management Commands |
1-6 |
service slot |
Logical Interface Commands |
1-13 |
service ubr |
ATM Commands |
1-27 |
service vbr-nrt |
ATM Commands |
1-27 |
service vbr-rt |
ATM Commands |
1-28 |
service-type |
AAA Commands |
1-33 |
service-type ftp |
AAA Commands |
1-34 |
service-type ppp |
AAA Commands |
1-35 |
session aging-time |
Session Management Commands |
1-8 |
session checksum |
Session Management Commands |
1-9 |
session log bytes-active |
Session Management Commands |
1-10 |
session log enable (interface view) |
Session Management Commands |
1-11 |
session log packets-active |
Session Management Commands |
1-10 |
session log time-active |
Session Management Commands |
1-12 |
session persist acl |
Session Management Commands |
1-12 |
set authentication password |
User Interface Commands |
1-27 |
set-overload |
IS-IS Commands |
1-57 |
sftp |
SSH2.0 Commands |
1-25 |
sftp client ipv6 source |
SSH2.0 Commands |
1-27 |
sftp client source |
SSH2.0 Commands |
1-27 |
sftp ipv6 |
SSH2.0 Commands |
1-28 |
sftp server enable |
SSH2.0 Commands |
1-14 |
sftp server idle-timeout |
SSH2.0 Commands |
1-15 |
sham-link |
MPLS L3VPN Commands |
1-63 |
shell |
User Interface Commands |
1-28 |
shutdown |
CPOS Interface Commands |
1-29 |
shutdown |
POS Interface Commands |
1-12 |
shutdown |
Ethernet Interface Commands |
1-14 |
shutdown |
WAN Interface Commands |
1-12 |
shutdown |
WAN Interface Commands |
1-27 |
shutdown |
Frame Relay Commands |
1-31 |
shutdown |
Logical Interface Commands |
1-12 |
shutdown |
ATM Commands |
1-29 |
shutdown |
E-CPOS Interface Commands |
1-7 |
shutdown (CE3 interface) |
WAN Interface Commands |
1-80 |
shutdown (CT1 interface) |
WAN Interface Commands |
1-44 |
shutdown (CT3 interface) |
WAN Interface Commands |
1-95 |
shutdown (MSDP view) |
MSDP Commands |
1-19 |
silent-interface (OSPF view) |
OSPF Commands |
1-60 |
silent-interface (RIP view) |
RIP Commands |
1-27 |
silent-interface(OSPFv3 view) |
OSPFv3 Commands |
1-43 |
slave auto-update config |
File System Management Commands |
1-22 |
slave restart |
HA Commands |
1-2 |
slave switchover |
HA Commands |
1-3 |
slave switchover { disable | enable } |
HA Commands |
1-3 |
snmp-agent |
SNMP Commands |
1-11 |
snmp-agent calculate-password |
SNMP Commands |
1-11 |
snmp-agent community |
SNMP Commands |
1-13 |
snmp-agent group |
SNMP Commands |
1-15 |
snmp-agent local-engineid |
SNMP Commands |
1-16 |
snmp-agent log |
SNMP Commands |
1-17 |
snmp-agent mib-view |
SNMP Commands |
1-17 |
snmp-agent packet max-size |
SNMP Commands |
1-18 |
snmp-agent sys-info |
SNMP Commands |
1-19 |
snmp-agent target-host |
SNMP Commands |
1-20 |
snmp-agent trap enable |
SNMP Commands |
1-22 |
snmp-agent trap enable bfd |
BFD Commands |
1-14 |
snmp-agent trap enable ospf |
OSPF Commands |
1-60 |
snmp-agent trap if-mib link extended |
SNMP Commands |
1-24 |
snmp-agent trap life |
SNMP Commands |
1-25 |
snmp-agent trap queue-size |
SNMP Commands |
1-25 |
snmp-agent trap source |
SNMP Commands |
1-26 |
snmp-agent usm-user { v1 | v2c } |
SNMP Commands |
1-27 |
snmp-agent usm-user v3 |
SNMP Commands |
1-28 |
source |
Tunneling Commands |
1-2 |
source interface |
NQA Commands |
1-30 |
source ip |
NQA Commands |
1-31 |
source port |
NQA Commands |
1-32 |
source-lifetime (IPv6 PIM view) |
IPv6 PIM Commands |
1-43 |
source-lifetime (PIM view) |
PIM Commands |
1-47 |
source-policy (IPv6 PIM view) |
IPv6 PIM Commands |
1-43 |
source-policy (PIM view) |
PIM Commands |
1-48 |
speed |
Ethernet Interface Commands |
1-15 |
speed (in user interface view) |
User Interface Commands |
1-29 |
spf timers |
OSPFv3 Commands |
1-43 |
spf-schedule-interval |
OSPF Commands |
1-62 |
spt-switch-threshold (IPv6 PIM view) |
IPv6 PIM Commands |
1-44 |
ssh client authentication server |
SSH2.0 Commands |
1-9 |
ssh client first-time enable |
SSH2.0 Commands |
1-10 |
ssh client ipv6 source |
SSH2.0 Commands |
1-11 |
ssh client source |
SSH2.0 Commands |
1-11 |
ssh server authentication-retries |
SSH2.0 Commands |
1-3 |
ssh server authentication-timeout |
SSH2.0 Commands |
1-4 |
ssh server compatible-ssh1x enable |
SSH2.0 Commands |
1-5 |
ssh server enable |
SSH2.0 Commands |
1-5 |
ssh server rekey-interval |
SSH2.0 Commands |
1-6 |
ssh user |
SSH2.0 Commands |
1-7 |
ssh2 |
SSH2.0 Commands |
1-12 |
ssh2 ipv6 |
SSH2.0 Commands |
1-13 |
ssm-mapping (IGMP view) |
IGMP Commands |
1-31 |
ssm-mapping (MLD view) |
MLD Commands |
1-28 |
ssm-policy (IPv6 PIM view) |
IPv6 PIM Commands |
1-45 |
ssm-policy (PIM view) |
PIM Commands |
1-48 |
start l2tp |
L2TP Commands |
1-9 |
startup saved-configuration |
File System Management Commands |
1-23 |
startup-query-count (IGMP view) |
IGMP Commands |
1-32 |
startup-query-count (MLD view) |
MLD Commands |
1-29 |
startup-query-interval (IGMP view) |
IGMP Commands |
1-33 |
startup-query-interval (MLD view) |
MLD Commands |
1-30 |
state |
AAA Commands |
1-35 |
state |
AAA Commands |
2-28 |
state |
PKI Commands |
1-25 |
state-refresh-hoplimit |
IPv6 PIM Commands |
1-46 |
state-refresh-interval (IPv6 PIM view) |
IPv6 PIM Commands |
1-46 |
state-refresh-interval (PIM view) |
PIM Commands |
1-49 |
state-refresh-rate-limit (IPv6 PIM view) |
IPv6 PIM Commands |
1-47 |
state-refresh-rate-limit (PIM view) |
PIM Commands |
1-50 |
state-refresh-ttl |
PIM Commands |
1-50 |
static-bind client-identifier |
DHCP Commands |
1-22 |
static-bind ip-address |
DHCP Commands |
1-23 |
static-bind mac-address |
DHCP Commands |
1-23 |
static-cr-lsp egress |
MPLS TE Commands |
1-91 |
static-cr-lsp ingress |
MPLS TE Commands |
1-92 |
static-cr-lsp transit |
MPLS TE Commands |
1-93 |
static-lsp egress |
MPLS Basics Commands |
1-62 |
static-lsp ingress |
MPLS Basics Commands |
1-63 |
static-lsp transit |
MPLS Basics Commands |
1-64 |
static-rp (IPv6 PIM view) |
IPv6 PIM Commands |
1-48 |
static-rp (PIM view) |
PIM Commands |
1-51 |
static-rpf-peer |
MSDP Commands |
1-20 |
statistics hold-time |
NQA Commands |
1-32 |
statistics interval |
NQA Commands |
1-34 |
statistics max-group |
NQA Commands |
1-33 |
step (for IPv4) |
ACL Commands |
1-17 |
step (for IPv6) |
ACL Commands |
1-27 |
stop-accounting-buffer enable (HWTACACS scheme view) |
AAA Commands |
3-14 |
stop-accounting-buffer enable (RADIUS scheme view) |
AAA Commands |
2-29 |
stopbits |
User Interface Commands |
1-30 |
stub (OSPF area view) |
OSPF Commands |
1-62 |
stub(OSPFv3 area view) |
OSPFv3 Commands |
1-44 |
stub-router |
OSPF Commands |
1-63 |
sub-interface rate-statistic |
POS Interface Commands |
1-13 |
sub-interface rate-statistic |
Ethernet Interface Commands |
1-17 |
sub-interface rate-statistic |
WAN Interface Commands |
1-12 |
sub-interface rate-statistic |
Frame Relay Commands |
1-33 |
sub-interface rate-statistic |
ATM Interface Commands |
1-3 |
summary |
RIP Commands |
1-27 |
summary (IS-IS view) |
IS-IS Commands |
1-58 |
summary automatic |
BGP Commands |
1-69 |
summary automatic (MBGP family view) |
MBGP Commands |
1-49 |
super |
Basic System Configuration Commands |
1-20 |
super password |
Basic System Configuration Commands |
1-21 |
synchronization (BGP view) |
BGP Commands |
1-70 |
synchronization (IPv6 address family view) |
IPv6 BGP Commands |
1-55 |
sysname |
Basic System Configuration Commands |
1-22 |
system-failure |
Device Management Commands |
1-38 |
system-view |
Basic System Configuration Commands |
1-23 |
|
|
|
t1 alarm |
WAN Interface Commands |
1-96 |
t1 bert |
WAN Interface Commands |
1-97 |
t1 channel-set |
CPOS Interface Commands |
1-30 |
t1 channel-set |
WAN Interface Commands |
1-98 |
t1 sendloopcode |
WAN Interface Commands |
1-99 |
t1 set clock |
CPOS Interface Commands |
1-30 |
t1 set clock |
WAN Interface Commands |
1-100 |
t1 set fdl |
WAN Interface Commands |
1-101 |
t1 set flag |
CPOS Interface Commands |
1-31 |
t1 set frame-format |
CPOS Interface Commands |
1-32 |
t1 set frame-format |
WAN Interface Commands |
1-100 |
t1 set loopback |
CPOS Interface Commands |
1-33 |
t1 set loopback |
WAN Interface Commands |
1-101 |
t1 show |
WAN Interface Commands |
1-102 |
t1 shutdown |
CPOS Interface Commands |
1-33 |
t1 shutdown |
WAN Interface Commands |
1-104 |
t1 unframed |
CPOS Interface Commands |
1-34 |
t1 unframed |
WAN Interface Commands |
1-104 |
t3 set alarm |
CPOS Interface Commands |
1-35 |
t3 set bert |
CPOS Interface Commands |
1-36 |
t3 set clock |
CPOS Interface Commands |
1-37 |
t3 set feac |
CPOS Interface Commands |
1-38 |
t3 set frame-format |
CPOS Interface Commands |
1-39 |
t3 set loopback |
CPOS Interface Commands |
1-39 |
t3 set mdl |
CPOS Interface Commands |
1-40 |
tcp anti-naptha enable |
IP Performance Optimization Commands |
1-19 |
tcp ipv6 timer fin-timeout |
IPv6 Basics Commands |
1-37 |
tcp ipv6 timer syn-timeout |
IPv6 Basics Commands |
1-37 |
tcp ipv6 window |
IPv6 Basics Commands |
1-38 |
tcp mss |
IP Performance Optimization Commands |
1-19 |
tcp state |
IP Performance Optimization Commands |
1-20 |
tcp syn-check |
Firewall Commands |
1-14 |
tcp syn-cookie enable |
IP Performance Optimization Commands |
1-21 |
tcp timer check-state |
IP Performance Optimization Commands |
1-21 |
tcp timer fin-timeout |
IP Performance Optimization Commands |
1-22 |
tcp timer syn-timeout |
IP Performance Optimization Commands |
1-23 |
tcp window |
IP Performance Optimization Commands |
1-23 |
telnet |
Telnet Configuration Commands |
1-1 |
telnet client source |
Telnet Configuration Commands |
1-2 |
telnet ipv6 |
Telnet Configuration Commands |
1-3 |
telnet server enable |
Telnet Configuration Commands |
1-4 |
temperature-limit |
Device Management Commands |
1-39 |
terminal debugging |
Information Center Commands |
1-27 |
terminal logging |
Information Center Commands |
1-28 |
terminal monitor |
Information Center Commands |
1-29 |
terminal trapping |
Information Center Commands |
1-29 |
terminal type |
User Interface Commands |
1-31 |
te-set-subtlv |
MPLS TE Commands |
1-94 |
tftp |
File System Management Commands |
3-2 |
tftp client source |
File System Management Commands |
3-4 |
tftp ipv6 |
File System Management Commands |
3-5 |
tftp-server acl |
File System Management Commands |
3-1 |
tftp-server domain-name |
DHCP Commands |
1-24 |
tftp-server ip-address |
DHCP Commands |
1-25 |
threshold |
CPOS Interface Commands |
1-42 |
threshold |
POS Interface Commands |
1-11 |
threshold |
E-CPOS Interface Commands |
1-7 |
time-out |
IPsec Commands |
2-24 |
timer (BGP/BGP-VPN instance view) |
BGP Commands |
1-71 |
timer (IPv6 address family view) |
IPv6 BGP Commands |
1-56 |
timer hello (IPv6 PIM view) |
IPv6 PIM Commands |
1-49 |
timer hello (PIM view) |
PIM Commands |
1-52 |
timer hold |
Ethernet Interface Commands |
1-17 |
timer hold |
WAN Interface Commands |
1-13 |
timer hold |
Frame Relay Commands |
1-34 |
timer hold |
HDLC Commands |
1-1 |
timer hold |
PPP Commands |
1-27 |
timer join-prune (IPv6 PIM view) |
IPv6 PIM Commands |
1-49 |
timer join-prune (PIM view) |
PIM Commands |
1-53 |
timer lsp-generation |
IS-IS Commands |
1-59 |
timer lsp-max-age |
IS-IS Commands |
1-61 |
timer lsp-refresh |
IS-IS Commands |
1-61 |
timer other-querier-present (IGMP view) |
IGMP Commands |
1-33 |
timer other-querier-present (MLD view) |
MLD Commands |
1-31 |
timer query (IGMP view) |
IGMP Commands |
1-34 |
timer query (MLD view) |
MLD Commands |
1-31 |
timer quiet (HWTACACS scheme view) |
AAA Commands |
3-15 |
timer quiet (RADIUS scheme view) |
AAA Commands |
2-30 |
timer realtime-accounting (HWTACACS scheme view) |
AAA Commands |
3-16 |
timer realtime-accounting (RADIUS scheme view) |
AAA Commands |
2-31 |
timer response-timeout (HWTACACS scheme view) |
AAA Commands |
3-17 |
timer response-timeout (RADIUS scheme view) |
AAA Commands |
2-32 |
timer retry |
MSDP Commands |
1-21 |
timer spf |
IS-IS Commands |
1-62 |
time-range |
ACL Commands |
1-1 |
timers |
RIP Commands |
1-28 |
timers |
RIPng Commands |
1-17 |
tnl-policy (VPN instance view) |
MPLS L3VPN Commands |
1-64 |
tos |
NQA Commands |
1-34 |
tracert |
System Maintenance and Debugging Commands |
1-6 |
tracert ipv6 |
System Maintenance and Debugging Commands |
1-7 |
tracert lsp |
MPLS Basics Commands |
1-65 |
track bfd echo |
Track Commands |
1-2 |
track interface |
Track Commands |
1-4 |
track interface protocol |
Track Commands |
1-5 |
track nqa |
Track Commands |
1-3 |
traffic behavior |
QoS Commands |
1-14 |
traffic classifier |
QoS Commands |
1-6 |
traffic-eng |
MPLS TE Commands |
1-94 |
traffic-shaping adaptation |
FR QoS Commands |
1-19 |
transform |
IPsec Commands |
1-31 |
transmit-pacing |
OSPF Commands |
1-64 |
ttl |
NQA Commands |
1-35 |
ttl expiration enable |
MPLS Basics Commands |
1-66 |
ttl expiration pop |
MPLS Basics Commands |
1-66 |
ttl propagate |
MPLS Basics Commands |
1-67 |
tunnel authentication |
L2TP Commands |
1-10 |
tunnel avp-hidden |
L2TP Commands |
1-10 |
tunnel flow-control |
L2TP Commands |
1-11 |
tunnel local |
IPsec Commands |
1-32 |
tunnel name |
L2TP Commands |
1-11 |
tunnel password |
L2TP Commands |
1-12 |
tunnel remote |
IPsec Commands |
1-33 |
tunnel select-seq load-balance-number |
MPLS L3VPN Commands |
1-65 |
tunnel timer hello |
L2TP Commands |
1-13 |
tunnel-policy |
MPLS L3VPN Commands |
1-65 |
tunnel-protocol |
Logical Interface Commands |
1-14 |
tunnel-protocol |
MPLS TE Commands |
1-95 |
type |
NQA Commands |
1-35 |
|
|
|
udp-helper enable |
UDP Helper Commands |
1-2 |
udp-helper port |
UDP Helper Commands |
1-2 |
udp-helper server |
UDP Helper Commands |
1-3 |
umount |
File System Management Commands |
1-14 |
undelete |
File System Management Commands |
1-15 |
url |
NQA Commands |
1-36 |
usb device-port enable |
Device Management Commands |
1-39 |
user |
File System Management Commands |
2-27 |
user privilege level |
User Interface Commands |
1-32 |
user-group |
AAA Commands |
1-36 |
user-interface |
User Interface Commands |
1-33 |
userlog flow export host |
Flow Log Commands |
1-3 |
userlog flow export source-ip |
Flow Log Commands |
1-5 |
userlog flow export version |
Flow Log Commands |
1-5 |
userlog flow syslog |
Flow Log Commands |
1-6 |
username (FTP test type view) |
NQA Commands |
1-37 |
user-name-format (HWTACACS scheme view) |
AAA Commands |
3-17 |
user-name-format (RADIUS scheme view) |
AAA Commands |
2-33 |
user-profile |
User Profile Commands |
1-2 |
user-profile enable |
User Profile Commands |
1-2 |
using (CE1 interface) |
WAN Interface Commands |
1-28 |
using (CE3 interface) |
WAN Interface Commands |
1-81 |
using (CT3 interface) |
WAN Interface Commands |
1-105 |
using { oc-12 | oc-12c } |
E-CPOS Interface Commands |
1-8 |
using { oc-3 | oc-3c } |
E-CPOS Interface Commands |
1-9 |
using e3 |
CPOS Interface Commands |
1-42 |
using t3 |
CPOS Interface Commands |
1-43 |
|
|
|
validate-source-address |
RIP Commands |
1-29 |
verbose |
File System Management Commands |
2-28 |
version |
RIP Commands |
1-30 |
version (IGMP view) |
IGMP Commands |
1-35 |
version (MLD view) |
MLD Commands |
1-32 |
virtualbaudrate |
WAN Interface Commands |
1-14 |
virtual-system |
IS-IS Commands |
1-63 |
vlan-termination broadcast enable |
VLAN Termination Commands |
1-5 |
vlan-type dot1q vid |
VLAN Termination Commands |
1-2 |
vlan-type dot1q vid second-dot1q |
VLAN Termination Commands |
1-3 |
vlink-peer (OSPF area view) |
OSPF Commands |
1-65 |
vlink-peer (OSPFv3 area view) |
OSPFv3 Commands |
1-45 |
vpn popgo |
MPLS L3VPN Commands |
1-66 |
vpn-instance (ICMP echo test type view) |
NQA Commands |
1-37 |
vpn-instance-capability simple |
MPLS L3VPN Commands |
1-67 |
vpn-target (MPLS L2VPN view) |
MPLS L2VPN Commands |
1-29 |
vpn-target (VPN instance view) |
MPLS L3VPN Commands |
1-68 |
vrrp ipv6 method |
VRRP Commands |
1-19 |
vrrp ipv6 vrid authentication-mode |
VRRP Commands |
1-19 |
vrrp ipv6 vrid preempt-mode |
VRRP Commands |
1-20 |
vrrp ipv6 vrid priority |
VRRP Commands |
1-21 |
vrrp ipv6 vrid timer advertise |
VRRP Commands |
1-22 |
vrrp ipv6 vrid track interface |
VRRP Commands |
1-23 |
vrrp ipv6 vrid virtual-ip |
VRRP Commands |
1-24 |
vrrp method |
VRRP Commands |
1-6 |
vrrp un-check ttl |
VRRP Commands |
1-7 |
vrrp vrid authentication-mode |
VRRP Commands |
1-7 |
vrrp vrid preempt-mode |
VRRP Commands |
1-8 |
vrrp vrid priority |
VRRP Commands |
1-9 |
vrrp vrid timer advertise |
VRRP Commands |
1-10 |
vrrp vrid track interface |
VRRP Commands |
1-11 |
vrrp vrid virtual-ip |
VRRP Commands |
1-12 |
|
|
|
wred |
QoS Commands |
3-21 |
wred dscp |
QoS Commands |
3-22 |
wred ip-precedence |
QoS Commands |
3-23 |
wred weighting-constant |
QoS Commands |
3-24 |
|
|
|
|
|
|
|
|