07-Layer 3—IP Services Configuration Guide

HomeSupportConfigure & DeployConfiguration GuidesH3C MSR610[810][830][1000S][2600][3600] Routers Configuration Guides(V7)-R6749-6W10007-Layer 3—IP Services Configuration Guide
16-IPv6 fast forwarding configuration
Title Size Download
16-IPv6 fast forwarding configuration 63.57 KB

Configuring IPv6 fast forwarding

About IPv6 fast forwarding

Fast forwarding reduces route lookup time and improves packet forwarding efficiency by using a high-speed cache and data-flow-based technology. It identifies a data flow by using the following fields:

·     Source IPv6 address.

·     Destination IPv6 address.

·     Source port number.

·     Destination port number.

·     Protocol number.

After a flow's first packet is forwarded through the routing table, fast forwarding creates an entry and uses the entry to forward subsequent packets of the flow.

Restrictions: Hardware compatibility with IPv6 fast forwarding

Hardware

Feature compatibility

MSR610

No

MSR810, MSR810-W, MSR810-W-DB, MSR810-LM, MSR810-W-LM, MSR810-10-PoE, MSR810-LM-HK, MSR810-W-LM-HK, MSR810-LM-CNDE-SJK, MSR810-CNDE-SJK, MSR810-EI, MSR810-LM-EA, MSR810-LM-EI

Yes

MSR810-LMS, MSR810-LUS

Yes

MSR810-SI, MSR810-LM-SI

Yes

MSR810-LMS-EA, MSR810-LME

Yes

MSR1004S-5G, MSR1004S-5G-CN

Yes

MSR1104S-W, MSR1104S-W-CAT6, MSR1104S-5G-CN, MSR1104S-W-5G-CN

Yes

MSR2600-6-X1, MSR2600-15-X1, MSR2600-15-X1-T

Yes

MSR2600-10-X1

Yes

MSR 2630

Yes

MSR3600-28, MSR3600-51

Yes

MSR3600-28-SI, MSR3600-51-SI

Yes

MSR3600-28-X1, MSR3600-28-X1-DP, MSR3600-51-X1, MSR3600-51-X1-DP

Yes

MSR3600-28-G-DP, MSR3600-51-G-DP

Yes

MSR3610-I-DP, MSR3610-IE-DP, MSR3610-IE-ES, MSR3610-IE-EAD, MSR-EAD-AK770, MSR3610-I-IG, MSR3610-IE-IG

Yes

MSR3610-X1, MSR3610-X1-DP, MSR3610-X1-DC, MSR3610-X1-DP-DC, MSR3620-X1, MSR3640-X1

Yes

MSR3610, MSR3620, MSR3620-DP, MSR3640, MSR3660

Yes

MSR3610-G, MSR3620-G

Yes

MSR3640-G

Yes

MSR3640-X1-HI

Yes

Hardware

Feature compatibility

MSR810-W-WiNet, MSR810-LM-WiNet

Yes

MSR830-4LM-WiNet

Yes

MSR830-5BEI-WiNet, MSR830-6EI-WiNet, MSR830-10BEI-WiNet

Yes

MSR830-6BHI-WiNet, MSR830-10BHI-WiNet

Yes

MSR2600-6-WiNet

Yes

MSR2600-10-X1-WiNet

Yes

MSR2630-WiNet

Yes

MSR3600-28-WiNet

Yes

MSR3610-X1-WiNet

Yes

MSR3610-WiNet, MSR3620-10-WiNet, MSR3620-DP-WiNet, MSR3620-WiNet, MSR3660-WiNet

Yes

Hardware

Feature compatibility

MSR860-6EI-XS

Yes

MSR860-6HI-XS

Yes

MSR2630-XS

Yes

MSR3600-28-XS

Yes

MSR3610-XS

Yes

MSR3620-XS

Yes

MSR3610-I-XS

Yes

MSR3610-IE-XS

Yes

MSR3620-X1-XS

Yes

MSR3640-XS

Yes

MSR3660-XS

Yes

Hardware

Feature compatibility

MSR810-LM-GL

Yes

MSR810-W-LM-GL

Yes

MSR830-6EI-GL

Yes

MSR830-10EI-GL

Yes

MSR830-6HI-GL

Yes

MSR830-10HI-GL

Yes

MSR1004S-5G-GL

Yes

MSR2600-6-X1-GL

Yes

MSR3600-28-SI-GL

Yes

Configuring IPv6 fast forwarding

About this task

The IPv6 fast forwarding feature will create fast forwarding entries for the device to speed up packet forwarding. When the traffic volume is high, the device will generate a large number of fast forwarding entries. These entries will cause high memory usage, which eventually leads to memory allocation failure for other services. In this case, you can disable this feature temporarily to free up device memory.

Procedure

1.     Enter system view.

system-view

2.     Configure IPv6 fast forwarding.

¡     Enable IPv6 fast forwarding.

ipv6 fast-forwarding enable

¡     Disable IPv6 fast forwarding.

undo ipv6 fast-forwarding enable

By default, IPv6 fast forwarding is enabled.

Configuring the aging time for IPv6 fast forwarding entries

About this task

The IPv6 fast forwarding table uses an aging timer for each forwarding entry. If an entry is not updated before the timer expires, the device deletes the entry. If an entry has a hit within the aging time, the aging timer restarts.

Procedure

1.     Enter system view.

system-view

2.     Set the aging time for IPv6 fast forwarding entries.

ipv6 fast-forwarding aging-time aging-time

By default, the aging time is 30 seconds.

Configuring IPv6 fast forwarding load sharing

About this task

IPv6 fast forwarding load sharing enables the device to identify a data flow by using the packet information.

If IPv6 fast forwarding load sharing is disabled, the device identifies a data flow by the packet information and the input interface.

Procedure

1.     Enter system view.

system-view

2.     Configure IPv6 fast forwarding load sharing. Choose one option as needed:

¡     Enable IPv6 fast forwarding load sharing.

Ipv6 fast-forwarding load-sharing

¡     Disable IPv6 fast forwarding load sharing.

undo ipv6 fast-forwarding load-sharing

By default, IPv6 fast forwarding load sharing is enabled.

Display and maintenance commands for IPv6 fast forwarding

Execute display commands in any view and reset commands in user view.

 

Task

Command

Display the aging time of the IPv6 fast forwarding entries.

display ipv6 fast-forwarding aging-time

Display IPv6 fast forwarding entries.

In standalone mode:

display ipv6 fast-forwarding cache [ ipv6-address ]

In IRF mode:

display ipv6 fast-forwarding cache [ ipv6-address ] [ slot slot-number ]

Display IPv6 fast forwarding entries for fragmented datagrams.

In standalone mode:

display ipv6 fast-forwarding fragcache [ ipv6-address ]

In IRF mode:

display ipv6 fast-forwarding fragcache [ ipv6-address ] [ slot slot-number ]

Clear the IPv6 fast forwarding table.

In standalone mode:

reset ipv6 fast-forwarding cache

In IRF mode:

reset ipv6 fast-forwarding cache [ slot slot-number ]

  • Cloud & AI
  • InterConnect
  • Intelligent Computing
  • Security
  • SMB Products
  • Intelligent Terminal Products
  • Product Support Services
  • Technical Service Solutions
All Services
  • Resource Center
  • Policy
  • Online Help
All Support
  • Become a Partner
  • Partner Resources
  • Partner Business Management
All Partners
  • Profile
  • News & Events
  • Online Exhibition Center
  • Contact Us
All About Us
新华三官网