Contents

License management commands· 1

display license· 1

display license device-id· 2

display license feature· 3

license activation-file install 4

license activation-file uninstall 5

license compress· 6

 

License management commands

 

 

display license

Use display license to display detailed license information.

Syntax

In standalone mode:

display license [ activation-file ]

In IRF mode:

display license [ activation-file ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

activation-file: Displays license information about activation files.

slot slot-number: Specifies the member ID of an IRF member device. If no member device is specified, this command displays license information for all IRF member devices. (In IRF mode.)

Usage guidelines

If you do not specify any parameters, this command displays detailed information about all licenses.

Examples

# Display detailed information about all licenses. (Applicable to devices that do not support the license pool.)

<Sysname> display license

Slot 1:

flash:/license/210235A0WAA1290000012018102813313656144.ak

Feature: WEB-CACHE

Product Description:  H3C MSR 800/26/LA Series Web Cache Software License

Registered at: 2018-10-28 13:33:02

License Type: Trial (days restricted)

Trial Time Left (days): 0

Current State: Expired

Table 1 Command output

Field	Description
Feature	Feature name.
Product Description	License description.
Registered at	Time when the license was installed.
License Type	License type by validity period: ·     NA—The system cannot obtain the license type. ·     Permanent—Purchased license that never expires and is always valid. ·     Days restricted—Purchased license that is valid for a period of days, for example, 30 days. ·     Date restricted—Purchased license that is valid for an absolute date range, for example, 2017-05-01 to 2017-05-30. ·     Trial (days restricted)—Free trial license that is valid for a period of days. ·     Trial (date restricted)—Free trial license that is valid for an absolute date range.
Time Left (days)	Remaining days of the license.
Trial Time Left (days)	Remaining days of the license.
Validity Period	Start date and end state for a date restricted license. If the license is permanent, this field displays No limit.
Trial Validity Period	Start date and end state for a date restricted license. If the license is permanent, this field displays No limit.
Current State	State of the license: ·     In use—The license is being used. ·     Usable—The license is available for use. ¡     If multiple days-restricted licenses for one feature are installed, only one license is in In use state and the rest licenses are in Usable state. ¡     A date restricted license is in this state if its start date is not reached. ·     Expired—The license has expired. ·     Uninstalled—The license has been uninstalled. ·     Unusable—The license cannot be used. ·     Invalid—The license is invalid and cannot be used.
Uninstall Key	This field is available for licenses that have been uninstalled.
Uninstall Date	Date when the activation file was uninstalled.

‌

display license device-id

Use display license device-id to display SN and DID information.

Syntax

In standalone mode:

display license device-id

In IRF mode:

display license device-id slot slot-number

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the member ID of an IRF member device. (In IRF mode.)

Usage guidelines

When you register a license for a device, you must provide its unique SN and DID.

The DID changes each time you use the license compress command to compress the license storage. Use the display license device-id command to identify the up-to-date DID each time you register licenses.

Examples

# (In standalone mode.) Display the device SN and DID.

<Sysname> display license device-id

SN: 210235A0W8B133000041

Device ID:

4QUF-Hn%W-D+Ss-A$gr-M@A>-t3uB-Qu:v-YafB

# (In IRF mode.) Display the SN and DID for the specified slot.

<Sysname> display license device-id slot 1

SN: 210235A1X5A129000001

Device ID:

ZR#9->CKc-4bpd-GrNf-LMap-D@5c-xtF:-:#sA

display license feature

Use display license feature to display brief license information for features.

Syntax

display license feature

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# (In standalone mode.) Display brief feature license information.

<Sysname> display license feature

Total: 128  Usage: 7

Feature                         Licensed        State

ACG                             Y               Trial

APMGR                           N               -

IPS                             N               -

RemoteTermConn                  N               -

SSLVPN                          N               -

WEB-CACHE                       N               -

pkg_data                        Y               Formal

pkg_security                    Y           

   Formal

pkg_voice

                       Y               Formal

Table 2 Command output

Field	Description
Total	Total number of licenses that can be installed.
Usage	Number of licenses stored in the license storage.
Feature	Feature that must be licensed before being used. The device does not support EVI in the current software version.
Licensed	Licensing state of the feature: ·     N—Not licensed. ·     Y—Licensed.
State	License type by purchasing state: ·     Formal—Purchased license. ·     Trial—Trial license. If the feature is not licensed, this field displays a hyphen (-). To use the feature, you must install a valid license.

 

license activation-file install

Use license activation-file install to install an activation file.

Syntax

In standalone mode:

license activation-file install license-file

In IRF mode:

license activation-file install license-file slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

license-file: Specifies the path of activation file, a case-sensitive string of 1 to 127 characters. The activation file must be valid and stored on the device.

slot slot-number: Specifies the member ID of an IRF member device. (In IRF mode.)

Usage guidelines

(In standalone mode.) License registration requires the device's hardware SN and DID.

(In IRF mode.) To install a license activation file successfully, make sure the SN and DID used for registering the feature license matches the current SN and DID of the device. Activation files are device locked. A licensed feature can run on the IRF member device where its activation file is installed even after the member device is moved from one IRF fabric to another IRF fabric.

Examples

# (In standalone mode.) Install activation file 20170810.ak.

<Sysname> system-view

[Sysname] license activation-file install flash:/license/20170810.ak

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...Done.

# (In IRF mode.) Install activation file 20170811.ak on the specified slot.

<Sysname> system-view

[Sysname] license activation-file install flash:/license/20170811.ak slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...Done.

Related commands

display license

display license device-id

license activation-file uninstall

license activation-file uninstall

Use license activation-file uninstall to uninstall an activation file.

Syntax

In standalone mode:

license activation-file uninstall license-file

In IRF mode:

license activation-file uninstall license-file slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

license-file: Specifies the file path, a case-sensitive string of 1 to 127 characters.

slot slot-number: Specifies the member ID of an IRF member device. (In IRF mode.)

Usage guidelines

Use this command to revoke an unexpired license if you want to transfer the license from one device to another.

When an activation file is uninstalled, the system creates an Uninstall file. Use this file together with the SN and DID of the transfer destination to register the license for the transfer destination.

A feature cannot run after you uninstall all of its activation files.

Trial licenses are not transferrable. When you uninstall the activation file of a trial license, no Uninstall file is created.

Examples

# (In standalone mode.) Uninstall activation file flash:/license/20130810.ak.

<Sysname> system-view

[Sysname] license activation-file uninstall flash:/license/20130810.ak

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...Done.

Uninstall file: flash:/license/20130810.uak

# (In IRF mode.) Uninstall activation file flash:/license/20130811.ak from the specified slot.

<Sysname> system-view

[Sysname] license activation-file uninstall flash:/license/20130811.ak slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...Done.

Uninstall file: flash:/license/20130811.uak

Related commands

display license

license activation-file install

license compress

Use license compress to compress the license storage.

Syntax

In standalone mode:

license compress

In IRF mode:

license compress slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies the member ID of an IRF member device. (In IRF mode.)  

Usage guidelines

The license storage is limited. You can execute this command to clear expired licenses and uninstalled licenses from the license storage.

If uninstalled licenses or expired licenses exist on the device, the compression operation will make the DID or DID file change. Before performing a compression, make sure all licenses registered with the old DID or DID file have been installed. You will be unable to install such licenses after the compression.

Examples

# (In standalone mode.) Compress the license storage.

<Sysname> system-view

[Sysname] license compress

This command will delete all data relevant to uninstalled and expired keys/licenses, including Uninstall keys, and create a new device ID for activation keys/files. Make sure you have saved the Uninstall keys so you can apply for a new activation key/file for the unexpired licenses that were covered by the uninstalled activation keys/files.

Are you sure you want to continue? [Y/N]: Y

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...Done.

# (In IRF mode.) Compress the license storage on the specified slot.

<Sysname> system-view

[Sysname] license compress slot 1

This command will delete all data relevant to uninstalled and expired keys/licenses, including Uninstall keys, and create a new device ID for activation keys/files. Make sure you have saved the Uninstall keys so you can apply for a new activation key/file for the unexpired licenses that were covered by the uninstalled activation keys/files.

Are you sure you want to continue? [Y/N]: Y

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...Done.