Contents

License management commands· 1

display license· 1

display license device-id· 2

display license feature· 3

license activation-file install 4

license activation-file uninstall 4

license activation-key install 5

license activation-key uninstall 6

license compress· 7

license license-key install 8

license license-key uninstall 8

 

License management commands

display license

Use display license to display detailed license information.

Syntax

display license [ activation-file | activation-key | license-key ] [ slot slot-number ]

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

activation-file: Displays license information about activation files.

activation-key: Displays license information about activation keys.

license-key: Displays license information about license keys.

slot slot-number: Specifies the member ID of an IRF member device. If no member device is specified, this command displays license information for all IRF member devices.

 

NOTE: The activation-key and license-key keywords are supported only in R2719 and later.

 

Usage guidelines

If you do not specify any parameters, this command displays detailed information about all licenses.

Examples

# Display detailed information about all licenses.

<Sysname> display license

flash:/license/000000000000000000002017071210370093932.ak                      

Feature: evi SPBM EVB FCoE TRILL                                         

Product Description: H3C S6800 Data Center License                             

Registered at: 2011-01-01 16:54:34                                             

License Type: Trial (days restricted)                                          

Trial Time Left (days): 30                                                      

Current State: In use

Table 1 Command output

Field	Description
Feature	Feature name. The device does not support the EVB, SPBM, TRILL, or EVI feature in the current software version.
Product Description	License description.
License Key	Installed license key.
Activation Key	Installed activation key.
Registered at	Time when the license was installed.
License Type	License type by validity period: ·     NA—The system cannot obtain the license type. ·     Permanent—Purchased license that never expires and is always valid. ·     Days restricted—Purchased license that is valid for a period of days, for example, 30 days. ·     Date restricted—Purchased license that is valid for an absolute date range, for example, 2015-05-01 to 2015-05-30. ·     Trial (days restricted)—Free trial license that is valid for a period of days. ·     Trial (date restricted)—Free trial license that is valid for an absolute date range.
Time Left (days)	Remaining days of the license. This field is available for a purchased license.
Trial Time Left (days)	Remaining days of the trial period. This field is available for a trial license.
Validity Period	Start date and end state for a date restricted purchased license. If the start or end date is not limited, this field displays No limit.
Trial Validity Period	Start date and end state for a date restricted trial license. If the start or end date is not limited, this field displays No limit.
Current State	State of the license: ·     In use—The license is being used. ·     Usable—The license is available for use. ¡     If multiple days-restricted licenses for one feature are installed, only one license is in In use state and the rest licenses are in Usable state. ¡     A date restricted license is in this state if its start date is not reached. ·     Expired—The license has expired. ·     Uninstalled—The license has been uninstalled. ·     Unusable—The license cannot be used. ·     Invalid—The license is invalid and cannot be used.
Uninstall Key	This field is available for licenses that have been uninstalled.
Uninstall Date	Date when the activation file was uninstalled.

‌

display license device-id

Use display license device-id to display SN and DID information.

Syntax

display license device-id slot slot-number

Views

Any view

Predefined user roles

network-admin

network-operator

Parameters

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

When you register a license for a device, you must provide its unique SN and DID.

The DID changes each time you use the license compress command to compress the license storage. Use the display license device-id command to identify the up-to-date DID each time you register licenses.

Examples

# Display the SN and DID for the specified slot.

<Sysname> display license device-id slot 1

SN: 210235A045B05B0004350                                                      

Device ID: flash:/license/210235A045B05B0004350.did

display license feature

Use display license feature to display brief license information for features.

Syntax

display license feature

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display brief feature license information.

<Sysname> display license feature

Slot 1:

Total: 5  Usage: 1                                                             

Feature                         Licensed        State                          

EVB                             Y               Trial                           

FCoE                            Y               Trial                          

SPBM                            Y               Trial                          

TRILL                           Y               Trial                          

evi                             Y               Trial

Table 2 Command output

Field	Description
Total	Total number of licenses that can be installed.
Usage	Number of installed licenses.
Feature	Feature that must be licensed before being used. The device does not support EVB, EVI, SPBM, or TRILL in the current software version.
Licensed	Licensing state of the feature: ·     N—Not licensed. ·     Y—Licensed.
State	License type by purchasing state: ·     Formal—Purchased license. ·     Trial—Trial license. If the feature is not licensed, this field displays a hyphen (-). To use the feature, you must install a valid license.

 

license activation-file install

Use license activation-file install to install an activation file.

Syntax

license activation-file install file-name slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters. The activation file must be valid and stored on the device.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

To install a license activation file successfully, make sure the SN and DID used for registering the feature license matches the current SN and DID of the device.

Activation files are device locked. A licensed feature can run on the IRF member device where its activation file is installed even after the member device is moved from one IRF fabric to another IRF fabric.

Examples

# Install activation file 20130811.ak to the specified slot.

<Sysname> system-view

[Sysname] license activation-file install flash:/license/20130811.ak slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Related commands

display license activation-file

display license device-id

license activation-file uninstall

license activation-file uninstall

Use license activation-file uninstall to uninstall an activation file.

Syntax

license activation-file uninstall file-name slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

file-name: Specifies the file path, a case-sensitive string of 1 to 127 characters.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

Use this command to revoke an unexpired license if you want to transfer the license from one device to another.

When an activation file is uninstalled, the system creates an Uninstall file. Use this file together with the SN and DID of the transfer destination to register the license for the transfer destination.

A feature cannot run after you uninstall all of its activation files.

Trial licenses are not transferrable. When you uninstall the activation file of a trial license, no Uninstall file is created.

Examples

# Uninstall activation file flash:/license/20130811.ak from the specified slot.

<Sysname> system-view

[Sysname] license activation-file uninstall flash:/license/20130811.ak slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Uninstall file: flash:/license/20130811.uak

Related commands

display license activation-file

license activation-file install

license activation-key install

Use license activation-key install to install an activation key.

 

NOTE: This command is supported only in R2719 and later.

 

Syntax

license activation-key install activation-key-string slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

activation-key-string: Specifies the activation key. The key must be in the format of XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX. The string is case sensitive and must be valid.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

To install a license activation key successfully, make sure the SN and DID used for registering the feature license matches the current SN and DID of the device.

Activation keys are device locked. A licensed feature can run on the IRF member device where its activation key is installed even after the member device is moved from one IRF fabric to another IRF fabric.

Examples

# Install an activation key on the specified slot.

<Sysname> system-view

[Sysname] license activation-key install XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Related commands

display license activation-key

display license device-id

license activation-key uninstall

license activation-key uninstall

Use license activation-key uninstall to uninstall an activation key.

 

NOTE: This command is supported only in R2719 and later.

 

Syntax

license activation-key uninstall activation-key-string slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

activation-key-string: Specifies the activation key. The key must be in the format of XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX. The string is case sensitive. Make sure the activation key has not expired.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

Use this command to revoke an unexpired license if you want to transfer the license from one device to another.

If an activation key is uninstalled, the system creates an Uninstall key. Use this key together with the SN and DID of the transfer destination to register the license for the transfer destination.

A feature cannot run after you uninstall all of its activation keys.

Trial licenses are not transferrable. When you uninstall the activation key of a trial license, no Uninstall key is created.

Examples

# Uninstall an activation key from the specified slot.

<Sysname> system-view

[Sysname] license activation-key uninstall XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Uninstall key: YYYY-YYYY-YYYY-YYYY-YYYY-YYYY-YYYY-YYYY

Related commands

display license activation-key

license activation-key install

license compress

Use license compress to compress the license storage.

Syntax

license compress slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

Use this command if the free license storage (see the display license feature command) is not sufficient.

The DID changes each time the license storage is compressed. Before performing a compression, make sure all licenses registered with the old DID have been installed. They cannot be installed after the compression.

This command clears invalid licenses (expired licenses and uninstalled licenses) and Uninstall keys from the license storage area. Back up the Uninstall keys before you compress the license storage.

Examples

# Compress the license storage on the specified slot.

<Sysname> system-view

[Sysname] license compress slot 1

This command will delete all data relevant to uninstalled and expired keys/licenses, including Uninstall keys, and create a new device ID for activation keys/files. Make sure you have saved the Uninstall keys so you can apply for a new activation key/file for the unexpired licenses that were covered by the uninstalled activation keys/files.

Are you sure you want to continue? [Y/N]: Y

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

license license-key install

Use license license-key install to install a license key.

 

NOTE: This command is supported only in R2719 and later.

 

Syntax

license license-key install license-key-string slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

license-key-string: Specifies a valid license key, a string of case-sensitive characters.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

License keys are device locked. A licensed feature can run on the IRF member device where its license key is installed even after the member device is moved from one IRF fabric to another IRF fabric.

You can install a license key on multiple devices.

Examples

# Install a license key to the specified slot.

<Sysname> system-view

[Sysname] license license-key install XXXXXXXX-(XXXX-)XXXXXXXX-XXXXXXXX-XXXXXXXX slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Related commands

display license license-key

license license-key uninstall

license license-key uninstall

Use license license-key uninstall to uninstall a license key.

 

NOTE: This command is supported only in R2719 and later.

 

Syntax

license license-key uninstall license-key-string slot slot-number

Views

System view

Predefined user roles

network-admin

Parameters

license-key-string: Specifies a valid license key, a string of case-sensitive characters. Make sure the key has not expired.

slot slot-number: Specifies the member ID of an IRF member device.

Usage guidelines

A feature cannot run correctly after you uninstall all of its license keys.

Examples

# Uninstall a license key from the specified slot.

<Sysname> system-view

[Sysname] license license-key uninstall XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX slot 1

This operation might take some time. Do not perform any other operations until the operation is completed or a failure message is displayed. Please wait...

Related commands

display license license-key

license license-key install