Contents

Basic IP forwarding commands· 1

display fib· 1

Load sharing commands· 4

bandwidth-based-sharing· 4

ip load-sharing mode· 4

Basic IP forwarding commands

display fib

Use display fib to display FIB entries. Each FIB entry contains a destination IP address/mask, next hop, and output interface.

Syntax

display fib [ topology topology-name | vpn-instance vpn-instance-name ] [ ip-address [ mask | mask-length ] ]

Views

Any view

Predefined user roles

network-admin

network-operator

mdc-admin

mdc-operator

Parameters

topology topology-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters. To specify a public topology, use base as the topology name. To display FIB entries for the public network, do not specify this option.

vpn-instance vpn-instance-name: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31 characters. To display the FIB entries for the public network, do not specify any VPN.

ip-address: Displays the FIB entry that matches the specified destination IP address.

mask: Specifies the mask for the IP address.

mask-length: Specifies the mask length for the IP address. The value range is 0 to 32.

Usage guidelines

If you specify an IP address without a mask or mask length, this command displays the longest matching FIB entry.

If you specify an IP address and a mask or mask length, this command displays the exactly matching FIB entry.

Examples

# Display FIB entries for the topology mt.

<Sysname> display fib topology mt

Destination count: 8 FIB entry count: 8

Flag:

  U:Useable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

Destination/Mask   Nexthop         Flag     OutInterface/Token       Label

0.0.0.0/32         127.0.0.1       UH       InLoop0                  Null

127.0.0.0/8        127.0.0.1       U        InLoop0                  Null

127.0.0.0/32       127.0.0.1       UH       InLoop0                  Null

127.0.0.1/32       127.0.0.1       UH       InLoop0                  Null

127.255.255.255/32 127.0.0.1       UH       InLoop0                  Null

224.0.0.0/4        0.0.0.0         UB       NULL0                    Null

224.0.0.0/24       0.0.0.0         UB       NULL0                    Null

255.255.255.255/32 127.0.0.1       UH       InLoop0                  Null

# Display all FIB entries of the public network.

<Sysname> display fib

Destination count: 5 FIB entry count: 5

Flag:

  U:Useable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

Destination/Mask   Nexthop         Flag     OutInterface/Token       Label

0.0.0.0/32         127.0.0.1       UH       InLoop0                  Null

1.1.1.0/24         192.168.126.1   USGF     M-GE0/0/0                Null

127.0.0.0/8        127.0.0.1       U        InLoop0                  Null

127.0.0.0/32       127.0.0.1       UH       InLoop0                  Null

127.0.0.1/32       127.0.0.1       UH       InLoop0                  Null

# Display the FIB entries for VPN vpn1.

<Sysname> display fib vpn-instance vpn1

Destination count: 6 FIB entry count: 6

Flag:

  U:Useable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

Destination/Mask   Nexthop         Flag     OutInterface/Token      Label

0.0.0.0/32         127.0.0.1       UH       InLoop0                  Null

20.20.20.0/24      20.20.20.25     U        M-GE0/0/0                Null

20.20.20.0/32      20.20.20.25     UBH      M-GE0/0/0                Null

20.20.20.25/32     127.0.0.1       UH       InLoop0                  Null

20.20.20.25/32     20.20.20.25     H        M-GE0/0/0                Null

20.20.20.255/32    20.20.20.25     UBH      M-GE0/0/0                Null

# Display the FIB entries matching the destination IP address 10.2.1.1.

<Sysname> display fib 10.2.1.1

Destination count: 1 FIB entry count: 1

Flag:

  U:Useable   G:Gateway   H:Host   B:Blackhole   D:Dynamic   S:Static

  R:Relay     F:FRR

Destination/Mask   Nexthop         Flag     OutInterface/Token       Label

10.2.1.1/32        127.0.0.1       UH       InLoop0                  Null

Table 1 Command output

Load sharing commands

bandwidth-based-sharing

Use bandwidth-based-sharing to enable IPv4 load sharing based on bandwidth.

Use undo bandwidth-based-sharing to disable IPv4 load sharing based on bandwidth.

Syntax

bandwidth-based-sharing

undo bandwidth-based-sharing

Default

The IPv4 load sharing based on bandwidth is disabled.

Views

System view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

This feature load shares flow traffic among multiple output interfaces based on their load percentages. The device calculates the load percentage for each output interface in terms of their expected bandwidths.

Devices that run load sharing protocols, such as Locator/ID Separation Protocol (LISP), implement load sharing based on the ratios defined by these protocols.

Examples

# Enable IPv4 load sharing based on bandwidth.

<Sysname> system-view

[Sysname] bandwidth-based-sharing

ip load-sharing mode

Use ip load-sharing mode to configure the load sharing mode.

Use undo ip load-sharing mode to restore the default.

Syntax

In standalone mode:

ip load-sharing mode { per-flow [ dest-ip | dest-port | ip-pro | src-ip | src-port ] * | per-packet } { global | slot slot-number }

undo ip load-sharing mode { global | slot slot-number }

In IRF mode:

ip load-sharing mode { per-flow [ dest-ip | dest-port | ip-pro | src-ip | src-port ] * | per-packet } { chassis chassis-number slot slot-number | global }

undo ip load-sharing mode { chassis chassis-number slot slot-number | global }

Default

The default load sharing mode is per-flow.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

per-flow: Implements per-flow load sharing.

dest-ip: Identifies flows by destination IP address.

dest-port: Identifies flows by destination port.

ip-pro: Identifies flows by protocol number.

src-ip: Identifies flows by source IP address.

src-port: Identifies flows by source port.

ingress-port: Identifies flows by ingress port.

algorithm algorithm-number: Specifies an algorithm for per-flow load sharing. The value range for the algorithm-number argument is 0 to 7, and the default value is 0.

global: Configures the load sharing mode globally.

per-packet: Implements per-packet load sharing.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command configures the load sharing mode for all cards. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number argument represents the member ID of the IRF member device. The slot-number argument represents the slot number of the card. If you do not specify a card, this command configures the load sharing mode for all cards. (In IRF mode.)

Examples

# (In standalone mode.) Configure per-packet load sharing for slot 2.

<Sysname> system-view

[Sysname] ip load-sharing mode per-packet slot 2