Fundamentals Command Reference

Covers the commands for logging in to and setting up an SR6602-X Router. This command reference includes:

·     CLI

·     RBAC

·      Login management

·      FTP and TFTP

·      File system management

·     Configuration File Management

·     Software Upgrade

·     ISSU

·     Emergency shell

·     Device Management

·     Security zone

·     Tcl

·     Python

·     License

Virtual Technologies Command Reference

Describes the commands of Virtual Technologies. This guide includes:

·     IRF

·     MDC

Interface Command Reference

Covers the interface configuration commands. This command reference includes:

·     Bulk interface

·     Ethernet Interface

·     WAN Interface

·     POS Interface

·      CPOS Interface

·     Loopback, null, and inloopback interface

Layer 2 – LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

·     MAC address table

·     Ethernet link aggregation

·     VLAN

·     VLAN termination

·     Spanning tree

·     LLDP

Layer 2 – WAN Access Command Reference

Covers WAN access technologies. This command reference includes:

·     PPP

·     L2TP

·     HDLC

·     IPoE

·     Frame Relay

·     DDR

Layer 3 – IP Services Command Reference

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

·     ARP

·     IP addressing

·     DHCP

·     DNS

·     NAT

·     IP forwarding basics

·     Fast forwarding

·     Flow classification

·     Adjacency table

·     IRDP

·     IP performance optimization

·     UDP helper

·     IPv6 basics

·     DHCPv6

·     IPv6 fast forwarding

·     Tunneling

·     GRE

·     ADVPN

·     AFT

·     WAAS

Layer 3 – IP Routing Command Reference

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

·     Basic IP routing

·     Static Routing

·     RIP

·     OSPF

·     IS-IS

·     BGP

·     Policy-based routing

·     IPv6 Static Routing

·     RIPng

·     OSPFv3

·     IPv6 IS-IS

·     IPv6 Policy-based routing

·     Routing Policy

·     MTR

·     DCN

IP Multicast Command Reference

Covers the commands for Layer 3 multicast protocols. This command reference includes:

·     Multicast Routing and Forwarding

·     IGMP

·     PIM

·     MSDP

·     Multicast VPN

·     IPv6 Multicast Routing and Forwarding

·     MLD

·     IPv6 PIM

MPLS Command Reference

Describes the commands to configure MPLS and MPLS VPN, This command reference includes:

·     Basic MPLS

·     Static LSP

·     LDP

·     MPLS TE

·     Static CRLSP

·     RSVP

·     Tunnel policy

·     MPLS L3VPN

·     MPLS L2VPN

·     VPLS

·     L2VPN access to L3VPN or IP backbone

·     MPLS OAM

·     MCE

·     Static SR over MPLS

ACL and QoS Command Reference

Covers the commands for classifying traffic with ACLs, and allocating network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

·     ACL

·     QoS

·     MPLS QoS

·     FR QoS

·     Time range

Security Command Reference

Covers security feature commands. This command reference includes:

·     AAA

·     Portal

·     User profile

·     Password Control

·     Keychain

·     Public Key

·     PKI

·     IPsec

·     Group domain VPN

·     SSH

·     SSL

·     SSL VPN

·     ASPF

·     APR

·     Session Management

·     Connection Limit

·     Object group

·     Object policy

·     Attack detection and prevention

·     ARP Attack Protection

·     ND attack defense

·     URPF

·     Crypto engine

·     FIPS

·     SMA

High Availability Command Reference

Covers high availability commands for managing failure detection and failover. Failure detection technologies focus on fault detection and isolation. Failover technologies focus on network recovery. This command reference includes:

·     Interface backup

·     Monitor Link

·     VRRP

·     BFD

·     Track

·     Process placement

Network Management and Monitoring Command Reference

Covers the commands that help you manage and monitor your network, for example, manage system events, collect traffic statistics, sample packets, assess network performance, and test network connectivity. This command reference includes:

·     System Maintenance and Debugging

·     NQA

·     NTP

·     SNMP

·     RMON

·     Event MIB

·     NETCONF

·     EAA

·     Process monitoring and maintenance

·      Sampler

·     Mirroring

·     NetStream

·     IPv6 NetStream

·     Information Center

·     Flow Log

·     GOLD

·     Packet Capture

EVI Command Reference

Describes the commands of EVI. This guide includes:

·     EVI

OpenFlow Command Reference

Describes the commands of OpenFlow.

VXLAN Command Reference

Describes the commands of VXLAN.

DPI Command Reference

Describes the commands of DPI. This command reference includes:

·     DPI engine

·     IPS