- Released At: 09-01-2020
- Page Views:
- Downloads:
- Table of Contents
- Related Documents
-
LSQM1CGS2FE0 2-port 100GBASE-R-QSFP28 optical Ethernet interface card
1 Card identifier
The card identifier LSQM1CGS2FE0 is in the upper right corner of the front panel.
2 Specifications
|
CAUTION: To avoid card damage, do not install this card in slot 10 on an S7510E switch. |
Table 1 Card specifications
Item |
Specification |
Dimensions (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
SDRAM (DDR3) |
2 GB |
Power consumption |
55W to 77W |
Interfaces |
2 × 100GBASE-R-QSFP28 fiber port |
Transmission rate |
100GBASE-R-QSFP28 fiber port: 100 Gbps |
|
NOTE: · To verify the compatibility of the card with the software release you are using, see the release notes. · For information about transceiver modules and cables available for the card, see the cards and transceiver modules compatibility matrixes for the device. |
3 Related documentation
For module installation, see the installation guide for the device.
For software upgrade, see the release notes for the device.
Copyright © 2016-2019 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.