Login
| Title | Size | Downloads |
|---|---|---|
| LSUM1FAB06XEB0 Card Manual-APW100-book.pdf | 17.90 KB |
- Table of Contents
- Related Documents
-
Switching fabric module - LSUM1FAB06XEB0
1 Card identifier
The card identifier LSUM1FAB06XEB0 is in the upper right corner of the front panel.
2 Specifications
Table 1 Card specifications
|
Item |
Specifications |
|
BootROM |
4 MB |
|
SDRAM |
2 GB |
|
Card size (H × W × D) |
40 × 292 × 318 mm (1.57 × 11.50 × 12.52 in) |
|
Power consumption |
56 W to 95 W |
|
Connector type |
RJ-45 |
|
Ports |
1 console port
The port is intended for maintenance and upgrade by H3C technical support engineers. H3C recommends not using it. If the device fails because you operate the port without authorization, H3C shall not be held liable for any consequence caused thereby. |
|
Applicable hardware platforms |
S10506X |
|
Applicable host software versions |
Release 7593 and Later |
|
|
NOTE: The OFFLINE button on the Switching fabric module is intended for debugging and locating failures by technical supports. H3C recommends not using it without authorization. |
3 Related documentation
For module installation, see H3C S10500X Switch Series Installation Guide.
For software upgrade, see the release notes for the device.
Copyright © 2019 New H3C Technologies Co., Ltd.
The information in this document is subject to change without notice.
