| Title | Size | Downloads |
|---|---|---|
| LSUM1SPMAEC0 Card Manual-6PW103-book.pdf | 20.04 KB |
- Table of Contents
- Related Documents
-
LSUM1SPMAEC0 base card
1 Card identifier
The card identifier LSUM1SPMAEC0 is at the upper left corner of the front panel.
2 Technical specifications
The LSUM1SPMAEC0 is a multi-service processing card with four subcard slots. You can only install the LSR1DRUP1L1 subcard in subslots 1 and 2.
· Specifications
Table 1 LSUM1SPMAEC0 specifications
|
Item |
Specifications |
|
Dimensions (H × W × D) |
40 × 399 × 355 mm (1.57 × 15.71 × 13.98 in) |
|
Power consumption |
94 W to 105 W |
|
Number of subcard slots |
2 slots |
|
|
NOTE: To verify the compatibility of the card with the software release you are using, see the release notes. |
|
|
IMPORTANT: · To ensure successful installation, make sure you remove the protection cover from a card before installing the card. · For the card to operate correctly, do not install the card in slots 4 to 9 of the S10510. |
· LEDs
Table 2 LED description
|
LED |
Status |
Description |
|
RUN |
Steady on |
The card is faulty. |
|
Off |
The card is faulty or not in position. |
|
|
Flashing (about once per second) |
The card is operating correctly. |
|
|
Fast flashing |
The card is starting up. If the LED keeps flashing fast, it means the card has failed to start up. |
3 Related documentation
For module installation, see the installation guide for the device.
For software upgrade, see the release notes for the device.
Copyright © 2014-2019 New H3C Technologies Co ., Ltd.
The information in this document is subject to change without notice.
