Management node configuration workflow

After deploying UIS-Sec gateway component VMs, log in to the UIS-Sec portal of UIS Manager Standard Edition to configure the management node. Figure-1 shows the management node configuration workflow, and Table-1 describes the configuration steps.

Figure-1 Management node configuration workflow

Table-1 Management node configuration workflow

Procedure	Description
Configure incorporation setting	Log in to the UIS-Sec portal of UIS Manager Standard Edition to incorporate the UIS standard edition.
Configure advanced settings	Configure network and network enhancement parameters.
Configure the network plan	Configure network egresses and VLAN ID ranges.
Configure an overall plan	Create and manage compute AZs, storage AZs, and network quotas for private clouds.