Perform this task to configure network and enhanced network parameters for the UIS-Sec portal of UIS Manager Standard Edition.
Log in to the UIS-Sec portal of UIS Manager Standard Edition.
On the top navigation bar, click System.
From the left navigation pane, select Advanced Settings > Advanced Features.
Configure the network and network enhancement parameters as described in "Parameters."
Network
Network Segment ID: Allows users to manually specify a VLAN ID for a newly created network. If this feature is disabled, the system automatically assigns a VLAN ID to a newly created network.
Tenant Address Overlapping: Allows different organizations to use IP addresses from the same subnet.
Network Enhancement
Supported vRouter per Network Node: Specifies the number of supported vRouters per network node. By default, the number is 5.