Configure the network plan
Create a network egress named bizNet on the network planning page. You can also edit and delete existing network egresses on the network planning page.
Create a network egress
Log in to the UIS-Sec portal of UIS Manager Standard Edition.
On the top navigation bar, select O&M.
From the left navigation pane, select Infrastructure > Network Planning.
Click the Network Automation tab.
Click Create.
Figure-1 Creating a network egress
Select network egress bizNet and configure the egress parameters as described in "Parameters."
Click Create.
Parameters
Network Type: Select the network type. Options include:
VLAN—Uses VLAN to isolate instances in the same physical network.
FLAT—Connects all instances to the same virtual network without network isolation.