Table of Contents

1 ACSEI Configuration Commands· 1-1

ACSEI Server Configuration Commands· 1-1

acsei client close· 1-1

acsei client reboot 1-1

acsei server 1-2

acsei server enable· 1-2

acsei timer clock-sync· 1-3

acsei timer monitor 1-3

display acsei client info· 1-4

display acsei client summary· 1-6

 

ACSEI Server Configuration Commands

acsei client close

Syntax

acsei client close client-id

View

ACSEI server view

Default Level

2: System level

Parameters

client-id: ID of the ACSEI client to be closed. An ACSEI client ID is assigned by the ACSEI server, in the range of 1 to 10.

Description

Use the acsei client close command to close the specified ACSEI client.

Examples

# Close ACSEI client 1.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei client close 1

acsei client reboot

Syntax

acsei client reboot client-id

View

ACSEI server view

Default Level

2: System level

Parameters

client-id: ID of the ACSEI client to be restarted, in the range of 1 to 10.

Description

Use the acsei client reboot command to restart the specified ACSEI client.

Examples

# Restart ACSEI client 1.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei client reboot 1

acsei server

Syntax

acsei server

View

System view

Default Level

2: System level

Parameters

None

Description

Use the acsei server command to enter ACSEI server view.

Examples

# Enter ACSEI server view.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server]

acsei server enable

Syntax

acsei server enable

undo acsei server enable

View

System view

Default Level

2: System level

Parameters

None

Description

Use the acsei server enable command to enable ACSEI server.

Use the undo acsei server enable command to disable ACSEI server.

By default, ACSEI server is disabled.

Examples

# Enable ACSEI server.

<Sysname> system-view

[Sysname] acsei server enable

acsei timer clock-sync

Syntax

acsei timer clock-sync minutes

undo acsei timer clock-sync

View

ACSEI server view

Default Level

2: System level

Parameters

minutes: Value of the synchronization timer that is used for clock synchronization from ACSEI server to ACSEI client. It ranges from 0 to 1440 (in minutes), where value 0 specifies to disable the clock synchronization from ACSEI server to ACSEI client.

Description

Use the acsei timer clock-sync command to set the synchronization timer that is used for clock synchronization from ACSEI server to ACSEI client.

Use the undo acsei timer clock-sync command to restore the default.

By default, the clock sychronization timer is set to five minutes.

Examples

# Set the clock synchronization timer from ACSEI server to ACSEI client to 20 minutes.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei timer clock-sync 20

acsei timer monitor

Syntax

acsei timer monitor seconds

undo acsei timer monitor

View

ACSEI server view

Default Level

2: System level

Parameters

seconds: Value of the monitoring timer that is used for ACSEI server to monitor ACSEI clients. It ranges from 0 to 10 (in seconds), where 0 specifies to disable ACSEI server from monitoring ACSEI client.

Description

Use the acsei timer monitor command to set the monitoring timer for ACSEI server to monitor ACSEI client.

Use the undo acsei timer monitor command to restore the default.

By default, the monitoring timer is set to 5 seconds.

Examples

# Set the monitor timer for ACSEI server to monitor ACSEI client to 6 seconds.

<Sysname> system-view

[Sysname] acsei server

[Sysname-acsei-server] acsei timer monitor 6

display acsei client info

Syntax

display acsei client info [ client-id ]

View

Any view

Default Level

1: Monitor level

Parameters

client-id: ID of an ACSEI client, in the range of 1 to 10.

Description

Use the display acsei client info command to display the ACSEI client information. The client information is retrieved from the advertisement packet sent by the client, so that when there is no ACSEI client information, the command displays the information keywords only.

If executed without the client-id argument, the command displays information about all the ACSEI clients in order of registration time.

Examples

# Display information about ACSEI client 1.

<Sysname> display acsei client info 1

Total Client Number: 1

 

 Client ID: 1

 Client Description:

 Hardware:

 System Software:

 Application Software:

 CPU: Intel(R) Pentium(R) M processor 1.40GHz

 PCB Version: 3.00

 CPLD Version: 1.00

 Bootrom Version: 1.12

 CF card: 256 MB

 Memory: 512 MB

 Harddisk: 40.0 GB 

# Display information about all ACSEI clients.

<Sysname> display acsei client info

Total Client Number: 2

 

Client ID: 1

Client Description:

 Hardware:

 System Software:

 Application Software:

 CPU: Intel(R) Pentium(R) M processor 1.40GHz

 PCB Version: 3.00

 CPLD Version: 1.00

 Bootrom Version: 1.12

 CF card: 256 MB

 Memory: 512 MB

 Harddisk: 40.0 GB

 

Client ID: 2

Client Description:

Hardware:

System Software:

Application Software:

CPU: Intel(R) Pentium(R) M processor 1.40GHz

PCB Version: 3.00

CPLD Version: 1.00

Bootrom Version: 1.12

CF card: 256 MB

Memory: 512 MB

Harddisk: 40.0 GB

Table 1-1 display acsei client info command output description

Field	Description
Client ID	ID of the ACSEI client
Client Description	ACSEI client description
Hardware	Hardware version of the ACSEI client
System Software	System software name and version of the ACSEI client
Application Software	Application name and version of the ACSEI client
CPU	CPU information of the ACSEI client
PCB Version	PCB version of the ACSEI client
CPLD Version	CPLD version of the ACSEI client
Bootrom Version	Boot ROM version of the ACSEI client
CF card	CF card information of the ACSEI client
Memory	Memory information of the ACSEI client
Harddisk	Harddisk information of the ACSEI client

 

display acsei client summary

Syntax

display acsei client summary [ client-id ]

View

Any view

Default Level

1: Monitor level

Parameters

client-id: ID of an ACSEI client whose summary is to be displayed, in the range of 1 to 10.

Description

Use the display acsei client summary command to display ACSEI client summary information. Summary information of multiple ACSEI clients is displayed in order of registration time.

If executed without the client-id argument, the command displays summary information about all the ACSEI clients.

Examples

# Display the summary of ACSEI client 1.

<Sysname> display acsei client summary 1

Total Client Number: 1

 

Client ID: 1

Status: Open

MAC Address: 00e0-fc0a-c3ef

Interface: GigabitEthernet5/0

Last registered: 02/08/2007 12:00:00

# Display the summary of all ACSEI clients.

<Sysname> display acsei client summary

Total Client Number: 2

 

Client ID: 1

Status: Open

MAC Address: 00e0-fc0a-c3ef

Interface: GigabitEthernet5/0

Last registered: 02/08/2007 12:00:00

 

Client ID: 2

Status: Open

MAC Address: 00e0-fa1e-03da

Interface: GigabitEthernet6/0

Last registered: 02/08/2007 13:00:00

Table 1-2 display acsei client summary command output description

Field	Description
Client ID	ID of the ACSEI client
Status	ACSEI client status
MAC Address	MAC address of the ACSEI client
Interface	Interface carrying the ACSEI client
Last registered	The last registration time of the ACSEI client