Configure DPDK settings

Procedure

1. On the top navigation bar, click Hosts.

Figure-1 Host management page

 

2. Select the target host, and then click the Advanced tab.

3. Click the DPDK tab.

4. Enable DPDK.

Figure-2 Enabling DPDK

 

5. Click the Edit icon  for a NUMA node, set the HugePages memory size to 2GB, select the CPUs that you have selected in step 5 of "Configure boot settings," and then click OK.

Figure-3 Binding HugePages memory and CPUs

 

6. Configure the other NUMA node in the same way.

7. Click Save.