QI-ANXIN Legendsec Unified Server Security Management System aims at protecting the IT infrastructure such as servers, VMs, cloud hosts, and containers in the virtual, cloud, and data center environments for government and enterprise users. The system can eliminate malicious scanning, vulnerability attacks, virus infection, and horizontal transmission in workloads through microsegmentation, multiengine cooperative file protection, and host network intrusion prevention. Together with security situation awareness and visualization capabilities, the system can perform unified analysis and display of security risks.
To use the QI-ANXIN Cloud Security service, first perform the following tasks:
Access QI-ANXIN Legendsec Unified Server Security Management System to enable access control and configure Syslog settings.
Log in to CAS and navigate to the Services > Security > Anti-Virus page to configure basic parameters and Syslog alarm settings for the QI-ANXIN service.
You can access QI-ANXIN Legendsec Unified Server Security Management System from the QAX console without entering a username and password.
To access QI-ANXIN Legendsec Unified Server Security Management System, you must configure port policies to permit the ports used by the QI-ANXIN service.
On the top navigation bar, click Services.
From the left navigation pane, select Security > QAX Cloud Security.
Click Settings.
Configure the parameters as described in "Configure the anti-virus service."
Click OK.
On the top navigation bar, click Services.
From the left navigation pane, select Security > QAX Cloud Security.